How to Replace Water Pump 2012-2017 Toyota Camry

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@justgabyt]

Thanks for the video! Great camera placement and easy to follow. This took way too long but it’s worth learning.

[@YHUHTech-kx4dz]

Thanks good content, once you get in there may as well replace thermostat, one less headache, again thanks good content

[@unebonnevie]

Excellent video! Pretty much the same steps for Lexus RX350/RX450h. At 22:59, the thermostat o-ring has an arrow on it. Make sure to install it pointing to the right direction! I would wait a bit for all the thermostat's 12mm bolts that have sealing material on them cured before putting in the coolant. Once the coolant is in, check for leaks before putting on plastic panels.

[@lbillie3103]

Very big job. My man, you look like you know what ur doing.

[@outoftime788]

why green coolant? thot it suposed to b red/pink?

[@jmsikorski1988]

Awesome video other than having your fingers in between the motor mount while lowering it, thats a pinch point i learned the hard way and lost part of the tip of my finger, us a pry bar or screwdriver to push the stud

[@ocvn84]

Can you advise the type of thread sealant for the bolts? Thanks!

[@AlCatrraz]

CLOCKWISE vs COUNTER CLOCKWISE for reverse thread.. Very involved... I was hoping to do it myself.... 😆😅 How long did it take you ?? THNX

[@danielcote4888]

How long time to do this repair??

[@roshanmuhsin9748]

Great Instructions with specs and tricks.

[@HappyKillerPro]

If your pulley is anything like mines was, you'll want to install the belt PRIOR to reinstalling the mounts.

[@AC-vt1nq]

Excellent job!!!

[@phiayang9787]

U do good job.

[@wowyummyyy]

LIKE👍👍👍👍👍 💗💗💗 💗💗 😎😎😎😎