How to Replace Front Brakes 1998-2011 Ford Ranger

Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ia/1APB...
This video shows you how to install new, quality TRQ brake pads and rotors on your 1998-2011 Ford Ranger. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obCf/1A...
• Pocket Screwdriver
• Pry Bar 1aau.to/o5E/1AX...
• 13mm Socket 1aau.to/obW9/1A...
• 15mm Socket 1aau.to/obW9/1A...
• 19mm Socket 1aau.to/oay5/1A...
• Bearing Race and Seal Driver 1aau.to/oH/1AXA...
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaL/1AX...
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oaT/1AX...
• Seal Puller 1aau.to/oi/1AXA...
• Metal Cutters
• Pliers
• 1/2 Inch Impact Gun 1aau.to/oxp/1AX...
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obZW/1A...
• Torque Wrench 1aau.to/oa4v/1A...
• 1-1/16 Inch Wrench
• Bearing Grease
• Brake Parts Cleaner
• Cotter Pin
• Sandpaper
• Drain Pan
• Floor Jack 1aau.to/oarh/1A...
• Hammer
• Jack Stands 1aau.to/oadu/1A...
• Pick 1aau.to/oYM/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/owS/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@tempestfyr]

my 99 ranger doesn't have that setup for disc brakes. I don't have a center nut to remove. Take the caliper housing off and my rotor falls off

[@justinmichael007]

No grease where the brake pads slide in the bracket clips? thats crazy.

[@ThunderbirdRocket]

Fantastic tutorial ! Extremely detailed ! Super helpful ! I learned lots !! Thanks mate . 👊🏼 🔥 🧰

[@MikeMaxim-d4p]

Made it so easy to do. Thanks!!

[@jimdavenport4484]

How do you tell a funny noise from one that’s not funny?😁

[@terryrideout7457]

Awesome video.thank u so much.appreciate this

[@braxtonharmon4386]

What if your wheel will not spin after this

[@richardlewis4288]

Very good video!