How to Replace Intake Manifold 2002-2009 Chevrolet Trailblazer

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@rogeliogarcia8195]

Really really good vid, makes me feel like I can do this myself. And I certainly will now

[@johnconnelly3674]

Thank you helped me out immensely, had 4 loose bolts, back one was finger tight and one was backed out an 1/8".

[@purplerain9791]

Great detailed video, wish I had the courage to do it myself 🙄

[@ZENEN63]

very good video😉! but what happend with the pcv hose?🤔

[@dougboddenjr575]

What do I do with the PCV hose? There was a popup that said you connect it, but there no port for it.

[@tadsworkshop]

This video doesn’t emphasize it enough, but the rear most bolt by the firewall is the most difficult part of the job. You’re going to have to be clever with some swivel fittings, or wobble extensions and experiment with 1/4” and 3/8” drive because it is very tight. You’d do well to have a mechanics inspection mirror on hand to see that last bolt. So when you get to that point?, be ready to buy some tools if you don’t already have these things. Be very careful not to cross thread that bolt upon reinstallation.

[@bonegrubber]

13:25 that third bolt at the bottom of the alternator has an AC line that won't allow the bolt to be backed out and it just grinds its hex'd head into the rubber hose and stops.... so is it not being said that I need to undo the ac line??!!! ....swearwords

[@Robert-i2r5f]

It is almost imposible to get to the last bolt on the manifold next to the windshield. I can not get out