How to Replace Transmission Mount 2001-2005 Honda Civic

Buy Now!
New Transmission Mount from 1AAuto.com trq.video/ib-1...
Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens. This video shows you how to install a new made to fit TRQ transmission mount on your 2001-2005 Honda Civic.
This repair was done on a 2001 Honda Civic EX 1.7L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2001 Honda Civic
2002 Honda Civic
2003 Honda Civic
2004 Honda Civic
2005 Honda Civic
Tools you will need:
• 12mm Socket trq.video/oyZ-...
• 14mm Socket trq.video/oyZ-...
• 17mm Socket trq.video/oyZ-...
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet trq.video/ovi-...
• 3/8 Inch Drive Ratchet trq.video/oyZ-...
• Socket Extensions trq.video/oyZ-...
• Gloves trq.video/ode-...
• Safety Glasses
• 10mm Hex Socket
• Floor Jack trq.video/oh6-...
Subscribe: / @trq
Check out our playlist:
Honda Civic 2001-2005 7th Generation: • Honda Civic 2001-2005 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

[@MultiNacho93]

what are those 2 little weights for? mine doesnt have it

[@josebernardomorales9671]

muchas gracias!

[@aldentiffany3393]

Aren’t you supposed to let the trans down first then tighten the middle bold?

[@Mike_70_70]

this mount is the transmission front?.

[@computek9141]

Did I miss the trans mount replacement?

[@nocheesable2345]

You should specify it’s an auto tranny in the title unless it’s the same for a manual tranny.