True North Concepts - Modular Holster Adapter (Tabletop Review)

Hey y'all! Thanks for checking it out.
This video is a tabletop review/installation of the True North Concepts Modular Holster Adapter and Leg Strap. If you have any questions, feel free to ask below in the comments and I will answer to the best of my ability!
Gun.Deals link: bit.ly/3hh8u75
And while you're at it, please like and subscribe to my channel if you are interested in seeing more content from me.
Make yourself better today!
-TN Ray

[@PatRMG]

I just can't help but make the first comment when a premiere allows for plenty of time to do so.

[@TNRay]

Lol I appreciate it Pat

[@fs_sean1882]

This thing is fantastic. Completely modular. And takes up less space on the belt than other systems. Ounces equal pounds.

[@TNRay]

For sure! Makes a huge difference to me

[@Darkness_Actual]

I'll have mine Monday. 🤗

[@TNRay]

Awesome!

[@akaTheDevil]

Just throw in some hook tape on the inside of your safariland mount and it should stop moving. Saves you $100.

[@TNRay]

Sure, that will work. But why not do it right and have an extremely solid mount that you know is not going anywhere? Worth $75 to me to know my pistol will be in the same place every single time I go for it

[@renegade7493]

thats way better than other things I've seen

[@TNRay]

I agree! They did a great job with the design on these

[@TheEleaticOne]

Thanks for the video! What magazine holders are you running with on that belt?

[@TNRay]

Hey thanks for watching! That’s a safariland double pistol mag pouch that faces the magazines away from you instead of sideways on your belt. Link: bit.ly/3JEmBjk

[@nicholasclarence]

Did you use any of the rubber spacers when installing the qls plate? Did you use the safariland or true north install screws/nuts?

[@TNRay]

Yes, I recommend selecting the rubber spacer based off the offset you need with your specific holster. I used the safariland nuts because they have the three tabs that allow them to sit flush inside the qls plate.

[@nicholasclarence]

@@TNRay Did you notice the 3 tabs scratching the metal surface of the plate ? Which side do you put the rubber spacers on ?

[@TNRay]

@nicholasclarence I put the spacers between the plate and the MHA

[@scooter1107]

Bro that’s a super cool product!! Where exactly did you learn about that?!

[@TNRay]

Some guy that likes scooters told me about it? 👀😉

[@saltoftheearth7341]

I made the same mistake. Couldn’t stop laughing at myself when I noticed.

[@TNRay]

Lol! That’s the only thing we can do, laugh it off and fix it

[@Matia5Kaa]

How does it feel when you sit in car? Compared to ubl

[@TNRay]

The MHA does not dig into your hip nearly as bad as a UBL, and I think that’s from the shape at the bottom. A UBL has the curved edge all the way around facing into your hip, whereas the MHA is flat. Way more comfortable

[@Matia5Kaa]

@@TNRay thats great to hear. Mha could be good solution then for work.

[@TNRay]

@@Matia5Kaa I say it’s worth a try!

[@cosimomarino6885]

How does this feel sitting down in a car for patrol shifts??

[@TNRay]

I’ve had no issues with it, but as you know, everyone is different and it also might depend on the vehicle. It feels better than a UBL for me because it has less bulk

[@cosimomarino6885]

Thanks.. I’m gonna place the order today and hopefully it’s comfortable at work in the car! Thanks for the input and review

[@TNRay]

@@cosimomarino6885 awesome! Thanks for watching!

[@dustdevil22]

Did you use spacers between the QLS and MHA?

[@TNRay]

On this one, I did not. On the one I have set up for competition, I did

[@dustdevil22]

Did you just use the ones provided in the bag?

[@TNRay]

@@dustdevil22 one setup I did, another setup I bought plastic spacers that are like 3/8” long. I have a gas pedal on my 2011 and it has to sit way out

[@dustdevil22]

Thank you for responding promptly. I'm setting one up for a work belt rn and was curious

[@TNRay]

@@dustdevil22 safariland holster?

[@Timanator]

Is it heavy? and is it stable without the leg strap? Thanks for the video!

[@TNRay]

Not heavy at all! It’s extremely sturdy, honestly doesn’t need a leg strap but I prefer to run one to help with draw by feeling where it’s at

[@FreedomFundsTV]

What holster you running?

[@TNRay]

JX Tactical owb / competition holster

[@asian_mando]

subbed!

[@TNRay]

I appreciate it! Content will start rolling out again very soon!

[@K1NG4uStiN]

What size strap fits on leg strap mount? 1.5 inch?

[@TNRay]

When you buy the leg strap kit, it comes with the strap. Think it’s a 1”, but double check with them because they just released their second generation leg strap and I haven’t seen that one in person yet 😁

[@djm10874]

I've been running this daily for a few months now and it is tearing the hell out of my pants where it rubs. Not an issue on my swat rig but 8 hours a day on my other set up is taking a toll on my pants. Any ideas for a remedy? I have attached adhesive pads in the rub area but they don't seem to be helping. Other than that it is a great option.

[@TNRay]

Hey thanks for your input! I haven’t had this issue but I’m also not wearing it on my duty setup. Have you tried sticking a foam piece on the inside of the adapter? Or maybe another option would be having an abrasion resistant material section sewed onto the outside of your pants just where these rub… if you’re not having to wear class b uniforms I suppose

[@silvertreeindustries6298]

I had the same issue on some range pants. I used sandpaper to smooth out the tops of the screws, which seemed to help a bit. I think the slots in the screws are very sharp, for some reason, and that is what is causing the west.

[@TNRay]

Hey @djm10874 I’ve got some info for you, if you’re still looking for a solution! Wore Performance makes something called the Aero Holster Pad, seems like a good way to cure the issues you mentioned. Hope all is well, and I hope this helps!

[@N3wbMa5t3r]

Why didn't you put it through the MOLLE on the belt? That's literally what it's for... 😂

[@TNRay]

Because the molle starts too far back on this specific belt. They have a full molle belt now that I do have it run through. But I’m not running the holster at the 4 o clock position where the molle starts

[@N3wbMa5t3r]

@@TNRay Gotcha... I didn't realize MOLLE started at 4 O'Clock... My bad.

[@TNRay]

No worries!

[@AndrewAcosta82]

Does it drop as low as the low ride UBL bro?

[@TNRay]

Yes, I have a Safariland for an M18 on a Low UBL and it rides in the same spot as my P320 on the MHA, when you use the lowest setting. Basically it gives you the option to run a mid drop or a low drop, or in between the two

[@AndrewAcosta82]

@@TNRay hell yeah, watching this bro I was sold. I like how slim it is too. It’ll be for a duty belt setup with a Glock 17 rmr.

[@TNRay]

@@AndrewAcosta82 awesome! Thank you for the support! Hope you enjoy your rig, sounds like it’ll be a sweet setup!

[@TheRealWadeW]

Is this tactical or tacticool?

[@TNRay]

Why not both? 🤷🏼‍♂️

[@TheRealWadeW]

@@TNRay exactly. Can you do a follow up video about it now that you've had time to use it?

[@TNRay]

I sure will! It may be a while before I get to it but I will definitely do a follow up! Thanks for the support 👊🏼

[@KayosWONER]

buys blem complains that its a blem.....

[@TNRay]

Here, I’ll fix it for you: Buys blem, complains the screw hole tolerances aren’t the correct diameter. That’s not technically a “blem”