Truing and Dressing a Grinding Wheel

  Рет қаралды 44,029

Jack Of All Trades Training

Jack Of All Trades Training

Күн бұрын

Пікірлер: 33
@PatelJagCanuck
@PatelJagCanuck 9 ай бұрын
Great Theoretical and Practical Explanation ! Good Luck !
@Stubbornnut
@Stubbornnut 9 ай бұрын
thanks for watching.
@mjremy2605
@mjremy2605 9 ай бұрын
This was very useful to see a manual wheel truing and dressing. The device is genius. Small and effective. Many thanks for a great demo. I can find the diamond dressing stick on Amazon easily, however, I cannot find the Truing tool you are using. Did you machine this yourself? I can find the Diamond Stick/Pencil part with the pointy diamond on top, but not the holder. Looks like a custom made holder. I'd love to get this holder. Any tips on where you bought it? fyi - 7:41 - PEDESTAL, not PEDISTAL.
@Stubbornnut
@Stubbornnut 9 ай бұрын
www.kbctools.ca/catsearch/598/diamond-dresser-holders search around for one you like. also there are you tube videos of how to mill one. if you have a mill. 🤞
@chasesteinman9541
@chasesteinman9541 Жыл бұрын
5:17 where can I buy one of those devices that hold the diamond point?
@Stubbornnut
@Stubbornnut Жыл бұрын
that one is shop made. very simple yet sturdy.
@ypaulbrown
@ypaulbrown 4 ай бұрын
Fantastic Bill, cheers from Down South in Florida, Paul...dang, that was a big groove in that wheel.......
@Stubbornnut
@Stubbornnut 4 ай бұрын
Yes it was!
@flashgordon6238
@flashgordon6238 2 жыл бұрын
The star wheel dresser has those two legs to hook behind the tool rest. Move the tool rest away from the wheel to allow clearance for the dresser legs. This will give you a solid point to reference as you move the dresser across the face of the wheel and will correct an out of round condition.
@Stubbornnut
@Stubbornnut 2 жыл бұрын
idk man….. i’ve heard that before from people but i’ve never trusted wedging something down into the wheel with nowhere to go. do you have documentation or a source of info to back that up?
@flashgordon6238
@flashgordon6238 2 жыл бұрын
@@Stubbornnut Hi Blair, I agree it goes against conventional safety teachings, but check out a wheel dresser manufacturer's technique here: kzbin.info/www/bejne/iKLbl31qedmNqrM Starting around the 3 minute mark, they show dressing the wheel and applying enough pressure so there are no sparks produced. At the 3 min, 28 seconds time index, they show truing a wheel by hooking the tool foot over the tool rest. Also, be sure to wear a respirator mask due to the grinding dust - Former Millwright for the Timken Company.
@Stubbornnut
@Stubbornnut Жыл бұрын
i have done it both ways. i don’t feel comfortable teaching that way in my channel because I can’t supervise. I work with and this channel is for beginners. this type of application should be done with experienced supervision
@flashgordon6238
@flashgordon6238 Жыл бұрын
@@Stubbornnut A year to reply? You must be a busy guy...
@steamtrainmaker
@steamtrainmaker 2 жыл бұрын
Hi on the subject of truing up wheels any idea how true up a polishing mop .I noticed you have 1 in the background. Steve
@Stubbornnut
@Stubbornnut 2 жыл бұрын
I haven’t made a video on it but here is a half decent explanation kzbin.info/www/bejne/hIasooiBjbiem68
@donellis5540
@donellis5540 Жыл бұрын
Wow! Fantastic video. Where can one obtain the tools to dress and true the grinding wheels? You mentioned Princess Auto for one tool but are all the tools available at Princess Auto? Please mention the replacement wheels for the dressing tool as well. Thanks for the video.
@Stubbornnut
@Stubbornnut Жыл бұрын
www.amazon.ca/Diamond-Dresser-Single-Grinding-Tapered/dp/B0744FVSB6 www.princessauto.com/star-grinding-wheel-dresser/product/PA0009027848 you will need to make a holder for the diamond point. the star dresser has a parts list on the web page. hope this helps. don’t propose to your girlfriend with it 🤣
@arty7122
@arty7122 2 жыл бұрын
A question if i may, if i wanted to make a truing tool at home could tungsten carbide do the same work as the diamond does?
@Stubbornnut
@Stubbornnut 2 жыл бұрын
diamond is a 10 mohl hardness rating. tungsten is an 8-9. therefore depending on what type of stone you are dressing you may be able to do it, however your bit will wear faster.
@dimmacommunication
@dimmacommunication Жыл бұрын
@@Stubbornnut How did you make yours ? did you have to buy a synthetic diamond for it ?
@6lr6ak6
@6lr6ak6 9 ай бұрын
Yes Tungsten will also, but the best way is to use the steel masonry cutting disc on a angle grinder it gets them absolutely true, do it outdoors tho.
@omkarmali8282
@omkarmali8282 2 жыл бұрын
Very nice demonstration
@timberanvil3788
@timberanvil3788 Жыл бұрын
Wouldn't the ears of the hooded dressing tool be able to reference against the tool rest and true up the out of round condition?
@Stubbornnut
@Stubbornnut Жыл бұрын
I have had this conversation many times. I don’t feel comfortable teaching that because of the potential for pinch point. also it is much more time consuming to adjust the tool test. i’ve done it both ways. both work.
@kabaddikabaddi2101
@kabaddikabaddi2101 2 жыл бұрын
Nyc
@kabaddikabaddi2101
@kabaddikabaddi2101 2 жыл бұрын
Love from india
@xmdslipkfanx
@xmdslipkfanx 7 ай бұрын
PPE? can't be good to breathe that dust.
@Stubbornnut
@Stubbornnut 7 ай бұрын
you’re probably right.
@ronaldpatton5668
@ronaldpatton5668 2 жыл бұрын
Seriously? People who own a grinder already know how to do this.
@Stubbornnut
@Stubbornnut 2 жыл бұрын
perhaps… but do young apprentices learning basics at work know how to do this or why they should?
@Vladimir_Viktorovich_Skrylev
@Vladimir_Viktorovich_Skrylev Жыл бұрын
@@Stubbornnut 😃👍💯👏
@stanocc-sv1kl
@stanocc-sv1kl Жыл бұрын
please don't steal those and give 'em to your girlfriend 😅
@Stubbornnut
@Stubbornnut Жыл бұрын
🫡💎
Drill Parts and Geometry
6:29
Jack Of All Trades Training
Рет қаралды 3,4 М.
REMOVE GROOVES IN BENCH GRINDER WHEELS EASILY WITH THIS CHEAP TOOL
5:47
Official Welding & Farming Archive
Рет қаралды 17 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 61 МЛН
Truing and dressing of diamond grinding wheels
4:56
Norton Abrasives EMEA
Рет қаралды 14 М.
How To Balance a Grinding Wheel on a Tormach PSG 612 Grinder
13:14
Tormach Inc.
Рет қаралды 150 М.
Dressing a diamond wheel
14:57
Alfred Lyon
Рет қаралды 63 М.
Dressing a Grinding Wheel for Beginners and Other Safety Tips
7:10
seejanedrill
Рет қаралды 121 М.
Using the Wrong Tool to Balance a Grinding Wheel
22:58
Clough42
Рет қаралды 173 М.
Creating Bushings for Your Grinding Wheels
6:21
WoodworkersJournal
Рет қаралды 265 М.
Dressing the Side of a Grinding Wheel
17:52
Solid Rock Machine Shop Inc.
Рет қаралды 20 М.
How to Sharpen a drill PT 2
5:51
Jack Of All Trades Training
Рет қаралды 1 М.
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН