Truth: Bicycle Free Energy Magnet Motor do not work. Not usable as an perpetual motion device!

Hello my friends, this time we are dealing with a rotating wheel of a bicycle that is supposed to run continuously with repelling magnetic force. The rim of the wheel is stocked with neodymium magnets and an neodymium stator is placed to power the zero energy machine.
As always, I demonstrate the basics of operation with my magnetism to gravity transfer.
You will see that EVEN the starting point is not suitable for acceleration.
And even if you adjust the structure so that acceleration can take place,
even then no permanent movement will be possible.
But see for yourself.
I was inspired by a comment on my videos
by KZbinr James Roney Stators ( • 🧲 Free Energy Magnetic... ),
who has already built some of these devices.
--
#yWild

[@tpuj9410]

Even if this did not work for free energy think maybe it could make pedaling a bike easier?

[@stingray7207]

How about using opposite polarity on the bottom of the wheel. Then adding multiple of the stationary magnets. Top and bottom. Or using two wheels with magnets arranged with opposite polarity. Start out with 2 or 4 on one wheel with the other wheel covered as shown. The magnets may need a slight tilt.

[@LAIBAUROOJ-fx4rs]

If you may explain that how can we make this magentism movable on permanent basis if we bring the stronger magnet close to the magnetic field of magnets which are pasted at Bicycle tyre. If i put the magnets on bicycle tyre in the NSNSNS position then will it work or not?

[@CrosswireHunter]

thanks bro - you are spending so much time and effort on this - thank you... your analogy of magnetism and gravity is so easily understood.

[@yWild]

Hi Cross, glad you like it. Thx for watching 🙂

[@TotalFreedomTTT-pk9st]

Okay - I'm getting your gravity model a bit watching this - so can you simulate two gravity relationships side by side - one for a magnet to magnet and one for a magnet to steel - you can study KJ Magnetics actual test data I will leave the link in comment below since KZbin might whack this comment if I put it on here - so the concept - (and I might be wrong) - is to enter the system via magnet to magnet attractiion with it's much longer (distance) attraction (compared to magnet to steel) then 'hand off' to the steel at the super closer point where the magnet to steel is almost equal to the magnet to magnet - now ! your rotor magnet is traveling along the steel world and now leaves with a negative attraction lower (not at first but over the span of distance) than the entering positive attraction of the magnet to magnet - this stator should be Roney like but you can simulate the two relationships somehow with your 'magic ' skills of cad simulation

[@yWild]

Hi Total, thx for your comment. In fact I do no stringent simulation of reality but an Thought-provoking impulse and a scenario how it could look like if the field were visible. As many magnetic ramps there is a point of maximal or minimal influence of the magnetic field which the moving part has to overcome. Only if one recognises the might of this point it is possible to understand why all these devices can’t move by themselves . 🙂 thx for watching

[@ostanin_vadym]

Thank you for content, explanation and amazing CGI.

[@yWild]

Glad you like it, thx for watching 🙂

[@fidelcatsro6948]

JRS videos lately are very good and he is becoming more successful in turning magnet motors into reality 🐱👍🏿

[@yWild]

Hi Fidel, I just don’t find JRS. Would be glad if you post the link right here. Thx for watching 🙂

[@fidelcatsro6948]

@@yWild James Roney Stators

[@andreasschmitt2307]

@@fidelcatsro6948 Didn't he find out that his devices spin much longer without the magnets?

[@yWild]

Hi Fidel, I don’t know either, but his principle is not able to work, in my opinion. Thx for your comments. 😏

[@TotalFreedomTTT-pk9st]

To not be trollish I do want to compliment you fantastic graphics and Cad work - I do Solid Model AutoCad and I do appreciate your work - the video's are great

[@yWild]

Hi Total, glad you like the animations and CGI 🙂. I appreciate that much. Thx for watching 🙂

[@daviddavids2884]

your gravity metaphor thing is a FAIL. the reality is, this concept may never work, but your video proves NOTHING.

[@yWild]

Hi David, thanks for your comment. You’re right, this concept will never work indeed, but there are many people thinking it would. That’s the reason for the video. If they are able to understand the magnetic influence as shown in the video, they may stop warring time. 🙂 thx for watching

[@olaruionut2250]

Hello! What about Adam Savage vs Perpetual Motion? Îs it true or fake ?

[@yWild]

Hi Olaru, thanks for your comment and the inspiring machine from Adam Savage. The machine looks like there are plenty of room for hidden devices and they say it’s a secret how it works. If it has to be an secret, then it is mostly an fake. The machine may get its power from the environment, like radiation from neon tubes in the room or other external influences. If it is not shown, what’s in the applied boxes and tubes then it will be an advertising trick of the museum. Thx for watching 🙂

[@paulwilton735]

Again, very nice animation and great analysis. But like a real scientist you conclude it doesn't work for long.

[@yWild]

Hi Paul, glad you like it. Yes it wouldn’t work. I hope that making the invisible magnetic field visible would help the people to understand better, than just get told a law of physics 😄. Thx for watching!

[@QuantumEnergySearch]

Have you looked at the Howard Menger magnet motor?

[@yWild]

Hi Quantum, thanks for your comment. I just don’t find it on KZbin. Is there a link to Howard Menger, or did you mean Howard Johnson? 🙂

[@patty1991]

It need a half flywheel or so .. + gravity Maybe..

[@yWild]

Hi Patty, thx for your comment. Sounds good, just try it and share your results 👍🏻. Thx for watching 🙂

[@x_makina_x]

Thank you! Another great explanation👏👏👏

[@yWild]

Hi Mustafa, glad you like it. Thank you for watching 🙂

[@TTPistole]

esto no funciona. comprobado.

[@yWild]

Hi TTP, thanks for your comment. Yes, you’re right 😄. That’s why I do such videos. Thx for watching

[@Xx-xd3zo]

The Rooney Stator was tested by some guy at a university... It worked. He explains it in his videos. Cool video.

[@yWild]

Hi X x, glad you like it. Yes, there are videos where people demonstrate their machines and it looks like the free energy thing is going well. On the other hand, there is no such machine in the shops to buy. I don’t know what has been going on there, but I fear that all is a fake for the audience. Thx for watching 🙂

[@Xx-xd3zo]

@@yWild - Well, for one - there's a lot of fraud and junk out there. No doubt. But a few things are actually out there. A guy built a magnet motor back in the "66. He was a German guy - Luling. Then a guy named Yildiz has one - he's from Turkey. There are a few out there. You can get a Yildiz. He sold it to some company. A guy named Joseph Newman got it - he was from Texas. A few people figured it out. There are just things and people who don't want them out.

[@yWild]

Hi X x, thx for your comment. You are right. This topic goes through the years and I was also one who believes in it and tried to build some of these motors. In the end, my idea to visualise magnetism by transferring it into dips and hills brought the change. Now I can show what is able to work and what is not. Feel free to refute my videos, but I think they show the truth. More an less 🙂. Thx for watching

[@Xx-xd3zo]

@@yWild - Hey, I love your videos. You do a great job! Really enjoy them. Was just pointing something out... Keep it up!

[@yWild]

Hi X x, glad you like it. Thx for watching and your comments 👍🏻🙂

[@maciejzezak8195]

Its no posoble!

[@yWild]

Hi Macie, thanks for your comment. That’s the reason why I do these videos. Thx for watching 🙂

[@fidelcatsro6948]

There is also a chinese video showing successful magnetic rail propulsion in a circular motion on the net i will try to see if i can find it again and share with you

[@yWild]

Hi Fidel, thx for your comment. Yes, if you are able to find an working concept, please let me know. Thx for watching 🙂

[@fidelcatsro6948]

@@yWild ok heres the chinese video kzbin.info/www/bejne/d3eocqSpjdaEaLs

[@yWild]

Hi Fidel, I saw the video. It’s a bit strange, that there must be an movie cut between inserting and running the machine. Then the microphone is muted while the magic is happening. It seems to be an fake video, because of this. The principle: it’s an array of 4 magnetic ramps, in an circle. I don’t think it is working. Thx for your comments. 🙂

[@fidelcatsro6948]

@@yWild yes its based on a well known fact where magnets can fly off a magnetic rail or ramp as you put it... i believe its genuinely possible because the ramp is there only thing its made to go round and round..we cant rule it out until we can make one well and test it...

[@yWild]

Hi Fidel, in order that an magnetic ramp is not able to put out more energy than putted in, it would not work. I would be glad, if I would be proven wrong 😋. Thx for your comments 🙂

[@milanrytir4219]

Neexistuje.

[@yWild]

Hi Milan, thanks for your comment. Yes you are right. That’s the reason why I do these videos. Thx for watching 🙂

[@davidtan1450]

amazing animation. wonderful explanation!

[@yWild]

Hi David, glad you like it. Thx for watching 🙂👍🏻