You gonna built the motor your putting in the ltr it would be sweet too do a big bore at the dunes big bore is necessary works well
@tonyhenriquez7453Ай бұрын
Great build brother🔥🔥🔥
@acrane23 жыл бұрын
I absolutely am in love with this build - even though me being in the Northeast portion of the US with no dunes. I respect the way you've built it as its a completely different type of riding compared to trail riding. I just wish Honda would stop fooling around and release a CRF powered TRX even if it was a limited production run. EFI and more power is just the tip of the iceberg showing just how much more beneficial that would be than having to scower Facebook marketplace and Craigslist to get a clean 450r LOL
@BikelifeDragRacing3 жыл бұрын
Looks real sharp man.
@MFFilmsAZ3 жыл бұрын
Thank you!
@BikelifeDragRacing3 жыл бұрын
@@MFFilmsAZ for sho. I’m the guy that just comment on your Facebook post I was waiting on this video to drop. One of my guys showed me your channel. Your color combo match super well man. I’m in the process of building a 06 450 I want it as clean as yours 💪🏿‼️.
@MFFilmsAZ3 жыл бұрын
@@BikelifeDragRacing I'm sure it will be! I appreciate the support and the shout out on your channel!!
@BikelifeDragRacing3 жыл бұрын
@@MFFilmsAZ no problem buddy . Looking forward for more videos.
@normanminer61653 жыл бұрын
I love you're content! And the bike you made is unbelievable man absolutely incredible..
@MFFilmsAZ3 жыл бұрын
Thank you!
@tonyhenriquez7453Ай бұрын
Question... is it the lower Walsh subframe that makes the rear fenders sit lower? If you had the oem subframe would the plastics stay tight together?
@MFFilmsAZАй бұрын
Lowered subframe and lowered front plastics and tank cause the gap.
@brendondunn75802 жыл бұрын
Where did you get that graphics kit I love that
@joshbeck2893 жыл бұрын
I gotta get a bcc skid plate
@hidros1461 Жыл бұрын
Is that an extended swing arm
@joshbeck2893 жыл бұрын
I wish I could find a tusk axle for my ltr
@MFFilmsAZ3 жыл бұрын
Rocky Mountain?
@joshbeck2893 жыл бұрын
@@MFFilmsAZ send me a link for an ltr tusk
@joshbeck2893 жыл бұрын
I’ve looked everywhere it’s like they no longer make them I don’t wanna spend 400$ on a dam axle but I will eventually but I think the tusk is just as good IMO
@luismi891083 жыл бұрын
Very clean built. I have a Ktm 520sx on a Suzuki ltr450 frame and is torque machine only 4 speed I don’t think I can handle 6 . But I can’t seam to find neutral when is running now I don’t know if because is hauling so much weight now on a quad frame. My question is are you doing something with the transmission or just going to lived stock? My motor started stock but the I upgraded with high comp piso port and polish. Hoy cams and all the good stuff. But they never ask me about beefing up the tranny
@MFFilmsAZ3 жыл бұрын
Stock trans. Clutch beefed up a bit for the excess weight. Judder spring removed is all.
@iamdunefreak3 жыл бұрын
Launch control? 🤔
@MFFilmsAZ3 жыл бұрын
Yep!
@goberttrebog25332 жыл бұрын
So I haven’t been keeping up with the Trx450r since 2009 when did they get traction control and launch settings? How do they work with a manual straight axle. I’m not trying to be sarcastic just am intrigued.
@MFFilmsAZ2 жыл бұрын
It's a modern dirtbike engine. Lots of videos on new electronics built into the ecu. Mostly ignition cut based on throttle/load
@atw1962 жыл бұрын
Why do you use ltr parts ?
@Dave-zt5oj3 жыл бұрын
How much do you think this build cost
@MFFilmsAZ3 жыл бұрын
kzbin.info/www/bejne/eZDIppx7pZWDjbs
@erickgonzalez39022 жыл бұрын
Can you do a hole parts list link so we can do this swap please
@MFFilmsAZ2 жыл бұрын
Have a video on costs, believe full list is there too
@dakotamcneal1059 Жыл бұрын
@MFFilms103 which video has the full cost and parts list. I'm going to start this conversion near the end of summer
@LMActionsports2 жыл бұрын
Can I ask you how you installed the fuel injection on your 450 R using the stock gas tank?
@MFFilmsAZ2 жыл бұрын
Was already an aluminum gas tank. Had to modify it.
@MervinRichards-c5y4 ай бұрын
I want to try CRF 1100 in the TRX 450 frame does anyone think it can work ?
@MFFilmsAZ4 ай бұрын
No idea what that is
@KilroyMotorSports3 жыл бұрын
make a video of you riding it
@MFFilmsAZ3 жыл бұрын
I have a ton. Check out the playlist.
@KilroyMotorSports3 жыл бұрын
@@MFFilmsAZ 👌🏻
@bk1k1263 жыл бұрын
Beautiful
@ethanstansfield82483 жыл бұрын
Why’d you go with the CRF front master cylinder? Just because? Or was there a performance and/or fitment benefit?
@MFFilmsAZ3 жыл бұрын
Wanted to run arc levers. The crf is smaller and looks cleaner I think. Plus it's half the cost of a berringer
@ethanstansfield82483 жыл бұрын
@@MFFilmsAZ yeah Berringer are spendy
@bmxpro2733 жыл бұрын
How does the tranny do for the heavier bike
@MFFilmsAZ3 жыл бұрын
No issues so far. Haven't heard of any either.
@timjohnston219111 ай бұрын
I'm doing the same thing I'm putting a CR 250 engine in mine 👍
@Apalm122 жыл бұрын
What was the purpose of the crf instead of the 450r stock motor if you built it and the Ltr is the best 450 to build you can make those things stupid mean
@wingnut450r3 жыл бұрын
Beautiful four-wheeler man, I gotta ask. Where did you get the stickers from? Those are exactly what I'm looking to do with mine, been wanting to go with a retro look with the graphics. Again, sweet quad man!
@MFFilmsAZ3 жыл бұрын
PsychMxGrafix
@etxthomasboyzpowersportz54812 жыл бұрын
Nice I'm thinking about doing my 05 trx450 this same way...awesome job bro and thanks for sharing 👍🏼
@nathanromain8821 Жыл бұрын
Bro that’s so dope 🔥😝😝
@StoneStraiff Жыл бұрын
This is so cool!
@KilroyMotorSports3 жыл бұрын
is it faster than a normal 450 like yfz trx ect
@user-xv2iz7ix5o3 жыл бұрын
Yes
@RideRedFred3 жыл бұрын
LT80 vs CRF 110 drag race.
@MFFilmsAZ3 жыл бұрын
Already done. It's in this video. Suzuki LT80 big bore build: First Test! Crash immediately
@RideRedFred3 жыл бұрын
@@MFFilmsAZ really how did i miss this video? LT got taken to gapple bees.lol
@RideRedFred3 жыл бұрын
There's this dude who put a cr85 engine on a trx90 and that thing moves pretty quick. kzbin.info/www/bejne/aIrGaK2gqJJ6jMU
@reginaldpayne76583 жыл бұрын
How many hp
@user-xv2iz7ix5o3 жыл бұрын
60
@MFFilmsAZ3 жыл бұрын
Dyno'd at 56 stock
@upwithjones22983 жыл бұрын
Yessirrr
@zayway3 жыл бұрын
Can an 2006 honda crf450r engine fit into a 2007 Honda 450ex body??????
@MFFilmsAZ3 жыл бұрын
Yes.. but they're similar engines. Not a ton to gain?