That is *absolutely beautiful,* Lou! 💕 What a blessing to get that vibration plate! 😊👍 Thank your Mum for us, please! 😊💕
@kimmaklad7945 күн бұрын
❤ beautiful mold, despite the miniscule bubbles. Love the final shading of the color. Happy creating !! 😊
@suemaddox77365 күн бұрын
I love that mould!! I put the empty mould on the vib plate and turn it on quite high but hang onto it so it doesn't fly off and add the aquacast with it on. After you've filled it up you can take it off. It needs to vibrate on a high setting. Hope that helps. I use the same one with concrete ornaments and coaster x
@LouiseSingletonCreations4 күн бұрын
Thank you so much for the tip Sue! I will definitely try that 👍❤️❤️
@mizzuzie33384 күн бұрын
The mould in itself is gorgeous and the two toned finished jar really did it justice as it highlighted the details more than a single tone would have done. That ocillating thingie looks really nifty.
@Mamas-Madhouse-Creations4 күн бұрын
Louise this mold came out so beautiful even with a ew pesky bubbles. ❤Gail
@roygarcia41764 күн бұрын
I absolutely love the architectural molds you do!!! This is stunning!!! It is actually beautiful both ways, waxed and non waxed…
@michelle_resinrebel4 күн бұрын
Hi Louise wow that mold is stunning 😍, I love the results you got with it being light and dark , great idea with the plate thanks for sharing ❤❤❤ xxx
@tammytoth58744 күн бұрын
BEAUTIFUL ❤❤❤❤ LOVE THE MOULD AND COLOR!! Can’t wait to see more results using your new toy
@LisaVornhagen4 күн бұрын
I love all of the details in that mold! That color is very pretty, too!
@jooboojb4 күн бұрын
Lovely video Lou, beautiful aqua cast pot made 😍 and gorgeous colour , thanks for sharing 😊
@dalemaclaren75764 күн бұрын
Gorgeous Lou❤❤❤ What a beautiful mold. ❤❤❤❤
@adalavin86484 күн бұрын
I really like the effect you got with the wax Louise. I think it looks antique. 😍
@mattersofthehartbynat88154 күн бұрын
Beautiful piece Louise… I love the colour!! ♥️♥️🇦🇺
@Allaboardresincreations4 күн бұрын
Stunning 😍 love boowan Nicole moulds. I’ve been so tempted to buy a vibration plate so think I might treat myself now. Absolutely Beautiful Louise 💙
@usherl2504 күн бұрын
It also works for bringing the bubbles up from resin. I do still squeeze the molds to coat the whole inside of the mold
@Spoillygirl4 күн бұрын
Love this mould💜💜 FYI: The link for the jar mould takes you to the vibration plate (Amazon CA).
@jinkiedog88244 күн бұрын
I worked for an orthodontist years ago and we used the vibrating plate to make plaster molds of full mouth teeth casts. Worked great for all the little teeth spaces. I've been thin!king about one for my UV resin work. Thanks you for the video, I need to look into aqua cast resin, looks interesting. Hint, vibrate your product before and after you pour.
@BassResinator4 күн бұрын
Detailed mold. Really cool
@genajones28234 күн бұрын
Really love that mold. It came out beautiful.
@MsJoanne64 күн бұрын
That is so beautiful. I liked the lighter colour better too, but it's still lovely.
@TheResinersPourHouse4 күн бұрын
I love the outside finish!
@wendysdecorium4 күн бұрын
Lovely video Louise. I got a vibration plate for Christmas too, I think it’s fabulous, mines slightly different . Beautiful mould ❤️
@joannashaw46684 күн бұрын
What a lovely piece, gorgeous colour too
@NerdGoblinArt4 күн бұрын
That was really interesting. Thank you for sharing 😊
@sowhat74725 күн бұрын
Love that mold ❤❤❤ and blue is my favorite color 😊
@kathrynseaman64824 күн бұрын
Beautiful mold!
@buzzbuzz73654 күн бұрын
Another great tutorial, thank you L
@Kathy-Carr3 күн бұрын
Beautiful results! Thank you.
@DDTC734 күн бұрын
I love aqua cast, but because the powder is so white, its difficult to get deep, bright colours, even with the pigments from Homeware Designs. A bright red will always come out pink. An iron oxide pigment is best, but never as bright as i would like
@LaurasDesignStudio4 күн бұрын
Looks like a winner
@timrockman74 күн бұрын
Pour a little at a time, then vibrate, to get bubbles out so they won't need to travel very far.
@carolynmozzone4124 күн бұрын
Love the result!
@usherl2504 күн бұрын
Great job and it’s beautiful.
@TK-7775 күн бұрын
That is beautiful.
@coralmarinesresinart4 күн бұрын
Very beautiful!!!
@usherl2504 күн бұрын
I also patch my holes by making a small amount and using a toothpick to fill in the hole
@the_zenba5 күн бұрын
try having the mold on the active vibration plate while you're slowly pouring in the resin, should work best
@Prettynotpurrfectcrafts4 күн бұрын
Hi Louise lovely video, that mould is pretty. I tried this a while ago with a home made vibrating tray, left it on until it had cured. I found I got a thin layer left on top that seemed to be like a film, like what you get with PVA glue on you hands. I thought maybe the acrylic binder in it was being separated. Would be interested to see what you get if you do it longer.
@heavenlyglaze5075 күн бұрын
Hi Louise have you considered using a ribbed silicone mat on the vibrating plate and a thin piece of wood / or small plastic tray on top of it and another mat on the wood/tray then pop your mould on so you have a bigger plate area for your moulds ?
@Soniax4 күн бұрын
I find that candle wax leaks through the vessel (I use Aquacast) when I use that wax but if I use their sealer, I don't get that problem. Beautiful candle!
@Sofee-0h3 күн бұрын
Lovely mould ...time will tell with your oscillating plate so far not bad but that noise would drive me crazy 😂 but that's just me
@sallymccornack1224 күн бұрын
It really does look great 😊. What were you using to cut the wooden wick Louise. I struggle with that and you made it look so easy ❤
@janicecorbett3288Күн бұрын
This is amazing….
@lindagomez34334 күн бұрын
Could you put a small silicone mat on the machine so it doesn't slide
@shaunabaker63464 күн бұрын
This is lovely Louise. All your videos are stunning. Just a heads up in case you don't know, scented candles along with sprays and such can be very toxic to pets. I just thought I would mention that so you can do a little research into that if you wish. Much love from Western Australia. xx
@melissawagner-wu19804 күн бұрын
Maybe put it on the vibrating plate at 1/3 full, 2/3 full and totally full. That might jar the bubbles up.
@ButtercupCreationz5 күн бұрын
Do you think you can go back with a small paint brush and put the wax on the piece and then go back over it with a larger paint brush just to make sure everything is rubbed in properly?
@NormaDerr-nv4cn4 күн бұрын
I’m not at all familiar with this product even though I’ve seen several videos. When cured it looks like plaster of Paris . If you have the time, could you tell me what it is.🥰
@kungfumanda7244 күн бұрын
Hi Louise, quick question, how do you clean your wax melter? Or do you just leave the wax in there and keep reheating? I would love to get one like yours but I’m wondering if the cleaning will be more trouble than it’s worth!
@lorimontcalm90864 күн бұрын
❤
@danielerovigi35945 күн бұрын
❤❤❤❤❤❤❤
@natashacowham79094 күн бұрын
The link for the mould is taking me to the vibrating plate is it doing this for anyone else please?
@lorriv97634 күн бұрын
Yes
@sandimal88724 күн бұрын
Same here
@MileyonDisney4 күн бұрын
Why do you link to the most-expensive one? The same machine is available on amazon for $10 less!
@buzzbuzz73654 күн бұрын
It’s self explanatory…that’s the machine she used in the video
@MileyonDisney4 күн бұрын
@@buzzbuzz7365 READ! The same machine is available on amazon for $10 less!
@IntoThatGreatGoodNight3 күн бұрын
We raised 11 foster children…. That noise from the machine is nothing 🤣. Admittedly, a few years ago I was in search of dental vibration plate, did some research, and most artists were saying not to get one. Now you’ve proven it is effective, so off to Amazon I go! Love the mold and love your work!! (edit: the link for the mold isn’t correct and is taking us to the vibration plate 😉)