Trying to Fix $5,000 Worth of Broken Laptops

[@SiETechNotebookReparatur]

Often it is enough to change the display refresh rate in the Intel graphics settings / Intel Graphics Control Panel and the flashing disappears.

[@Tronicsfix]

Interesting. Thanks for the comment.

[@torind2000]

@@Tronicsfix i had a lenovo that had a similar issue and it turned out it needed a firmware upgrade for the touchscreen

[@szymon7607]

it doesn't fix the issue. It's a mitigation at best. If cable does not allow stable high-bandwidth transmission that probably means some component has degraded.

[@SiETechNotebookReparatur]

@@szymon7607 The problem is, that the Intel driver switches the refresh rate to 40Hz for some reason. Sometimes the display only flickers in battery mode. Sometimes it stays that way even in plugged-in mode. It happens even on brand new laptops, it's driver bug.

[@robdgekke]

Sometimes this also means that the display it self is broken. I've seen it with verious laptops. Display can't handle a refresh rate anymore so it starts flikkering

[@Hostilenemy]

Using liquid metal on Copper heatsinks/heatpipes is a bad idea. Overtime, it gets absorbed into the copper and your temps will shoot through the roof again. In order to use Liquid Metal on copper stuff, it needs to be nickel plated to prevent absorption.

[@TheSpotify95]

yeah just use some arctic mx-4 and away you go :)

[@forensics1]

I used liquid metal on a 4670k back at launch that had been lapped with a direct copper heatsink. Used that PC for 5 years and never had any temps issues.

[@Scytian1]

Nothing will happen, Copper will form alloy with liquid metal but temperatures should stay the same because that alloy have simillar heat conductivity, nickel plating is just for the looks. You shouldn't use liquid metal on aluminium heatsinks.

[@Hostilenemy]

@@Scytian1 Liquid metal will sip in and you have to re-apply it sometime later.

[@NicoAlegria]

That is not completely correct. In the early days of the liquid metal boom, some people said that after half a year they check the liquid metal if there any leak, if it ''drys'' or similar, and saw that was ''obsorbed'' couse the copper form an a alloy, so they started a myth, because they wanted to sell a history and get views. Is like ''microwave or coca-cola zero cause cancer'', ''ps5 and liquid metal it is a bad idea and I show you why'', and all was false so they get views xD. So don't belive all you see in internet, especialy in youtube please.

[@FadingAway90]

Quick tip for display problems. if you go into the computers BIOS by pressing F2 (Usually) and wait, if the problem happens in there, its usually hardware If the problem starts after POST, when Windows has taken control, its usually a driver issue.

[@CannibalShadow]

Was about to type this 👍🏾

[@Nightwing-ym9ci]

i had exactly the same issue at my work a few days ago. But i knew it was the drivever saw that allready a couple of times.

[@nsaneaf4982]

Yeah that's always what I do, go to the bios, sometime running a live linux to test things out, and then if it's hardware, I open it up, I find it better to test the laptop before entirely reassembling it, to not having to open it up two times if a problem occur for exemple.

[@PB-cs5ph]

If I hear of anyone looking for replacement parts for their HP computer, I will definitely send them your way. Keep up the good work!

[@silitekmodder5681]

The old hardened thermal pads could be preventing the heatsink from contacting the die all the way- probably best to replace with thermal putty

[@j.p.h.8126]

Yeah the pads looked like some were not making contact. I would have like to see some thermal testing done on that system.

[@Blix8]

Yes, its very common on Laptops and desktop GPUs. I saw a laptop that started overheating after being dropped too hard on the table, or used GPU that started overheating after being shipped in a box. Both times repasting fixed them as the old hardened paste couldnt take even a small shift of the heatsink.

[@TheBrando212]

I also think he probably had too much thermal paste on, despite his claims of "perfect amount" The paste on the larger chip looked way too thick.

[@silitekmodder5681]

@@TheBrando212 If there's proper pressure it shouldn't matter that much.

[@Kvikeris]

Fan speed can be managed from BIOS. So if you set it on max manually, fan will always run on max speed when pc is turned on

[@nabilhy]

i love how humble this man is

[@drinkintea1572]

Who doesn't love this man?

[@CubbyTech]

I honestly didn't think that switching to liquid metal would fix the issue - what an interesting fix!

[@stevenc5227]

I think he should have looked into under volting before, makes a big difference without all the work, thermal paste looked fine to me.

[@smyth0109]

I think it might of been mounting pressure/correct contact to CPU/GPU with the heat sink personally. Can’t see liquid metal fixing that much of an issue

[@TheSpotify95]

Maybe thermal paste just wasn't enough for that laptop? Personally, I don't mind thermal paste because I don't have liquid metal - and 99% of the time, it's perfectly fine. I was thinking it might have been more a software issue or a fan curve issue... always good to check CPU temperatures using a program like Core Temp...

[@robertpage2023]

LQ is about 75 times more cooling efficient than the best thermal paste.

[@cheapasstech]

I’ve had drivers not being installed causing the fans to run all the time; Installing the chipset driver / pm driver fixed that

[@TheTrmetzgar]

Great work sir, I love your content. I work for a used laptop reseller and it so nice to see someone that take their time to do the job correctly. That being said as stated before it not a good idea to use liquid metal with copper. One last thing, being that those are high performance units. Sometime there are settings in the bios that will allow you to control the fan speed to improve cooling during gaming. I'm not saying that was the situation here but it's always a good idea check the setting and reset if needed.

[@justinvanhorne9958]

Hey, the affects of mixing liquid metal with copper are proven to be cosmetic and the original performance of the contact plate remains intact :) it just stains the copper over time and looks very ugly, its not pitting or corroding anything. happy cooling :)

[@benjamintan2733]

Well, for me, I usually check the BIOS first to determine if the problem is more on hardware side or software side. With that in mind, if you boot into Windows (or any other OS) and it behaves oddly, you can have high confidence that it is the OS fault instead of hardware issues. I'm glad it was a minor fix for LG Gram.

[@robertbuzdea6257]

He didn t really fixed it, as it could be happening again if he reinstalls the gpu again, could pe a bad igpu but it rarely happens, so i guess he just needs to get the latest gpu update

[@benjamintan2733]

@@robertbuzdea6257 Yeah, but sometimes Windows auto update screw everything up. The best driver is to get it from LG official website. I remember Windows screws the update by automatically update the AMD gpu driver of my MSI GX70 3BE because while the dGPU Radeon HD8970m supports the newer version of CCC (Catalyst Control Centre), my iGPU can't (Radeon HD 8650G). Always have to DDU when Windows performs update.

[@RobBowls]

@@robertbuzdea6257it did reinstall the graphics driver: you can hear it being removed and installed in the video

[@acide0acetique]

I'm the only one who is super happy after every repair he does?

[@exturkconner]

Conformal coating can be any number of materials. This one looks to be an acrylic. Which yeah means it's basically the exact same thing as an acrylic nail polish.

[@jayleeb377]

Love your videos! I just bought the "I'm here because you broke something" shirt off your website(I noticed you're wearing it in the video). My family will get a kick out of it since I'm the person they call whenever something is broken. Thanks for the great videos and for giving me the confidence to try fixing things I used to be scared to even take apart.

[@dantenage9687]

That flashing screen is a software or config issue, i have not finished the video yet so i hope that was the problem, i don't remember if it has to do with refresh rate or something like that

[@keremardicli4013]

I also believe razors problem was also a software issue.

[@cothfi]

Definitely. Maybe a bios update or a driver update could've fixed those issues. We know Windows 11 don't play nice with some hardware combinations.

[@compaqdeskpro5770]

I doubt that the connector you attached was the LCD connector, that should have looked like the wide gold pins you see on the bottom. I think that board was for the touchscreen.

[@GREGELZZ]

it was the connector for the touch screen

[@bestbattle]

@12:45 you don't clean off the grease you left with your fingers from the flex end?

[@LurifaxDK]

Any danger of the liquid metal moving to other parts of the laptop if it is bumped or stored vertically? On the PS theres some kind of gasket to prevent overspill so was just wondering if this could be an issue on a laptop, especially since they do tend to get a few more knocks and bumps.

[@nv8488]

It will probably be fine, but i would rather worry obout liquid metal on a copper heatsink, as that will probobly not mix well

[@debraj-kayal]

Is there any way you can fix my laptop? 😢 It is an Asus Tuf gaming F17 2022 (FX707ZM). The clock speeds are going all the way down to 0.3 or 0.4 GHz and is not boosting to 4.7 too as it should with i7 12700H. Unresponsive, laggy when this is happening. Also it is heating up quite a lot. All these are happening not consistently, but every few hours. My country of residence is India.

[@derpaddy8130]

Wouldn‘t it make sense with the first laptop, to check the temperatures first, before disassembling? To rule out if it was an issue with some kind of sensor?

[@robertbuzdea6257]

he isn t really into computers, so he just applies what he learned from repairing consoles. So as consoles don t have temperature monitors, he has never checked temps on anything

[@robertbuzdea6257]

although, he had very good ipothesis about the defects, and he did a great job on the razer. kinda dissapointed in the lg gram as he just uninstalled the igpu driver, which will install by itself again in the future, and probably will behave again like that

[@RobBowls]

@@robertbuzdea6257it reinstalled right in the video. If it didnt he wouldn’t get any video at all.

[@christophervanzetta]

@@robertbuzdea6257windows usually installs stable drivers from the past unlike new ones that could have issues. I’ve never had an issue with windows in over 20 years

[@Hellost-90]

does liquid metal corrode the copper coating?

[@iloc8one]

windows 11 has that issue with display adapter, its good to boot from a live usb to a linux based os which can make life easier, amazing content i love the videos and its happy to see you posted something when i open KZbin

[@dashingdanstrains]

Mind if I ask what overhead camera rig you use? The overhead shots of taking apart the laptops are great!

[@aqw0031]

Can I use the coating also for a PS5 when I removed the plastic part?

[@turtlebro4498]

Hello, I have a Razer Blade stealth 13 inch laptop, the mousepad stopped working before I purchased it. I tried reinstalling windows and it worked for a few minutes and then stopped working. While I prefer using a mouse, there are times where the mousepad is more convenient to use. Do you know where I could find software for it?

[@Sakhrimpi]

you can use a HDMI cord and plug it into a tv or a monitor if you have a broken screen or something

[@mauricelopez1745]

Did you install any other intel graphics driver? By uninstallibg the driver you are just disabling hardware acceleration. Meaning its still broken.

[@cosminmihai1229]

Did you remove the battery connector of the 2nd laptop before removing the display cable? This might cause some issues

[@jesusdeloera4300]

the first laptop it seemed their was not enough clamping force how thick that thermal paste was. maybe its just me but that would cause this issue

[@not_so_tactical8074]

For the razor does it have a game mode bios? Some gaming boards have a game boost mode and ramp the fans up and the boost clock of the CPU. Just a thought

[@danbrookshire5628]

Would you recommend one brand of laptop that seems to have less issues. Thanks

[@hatimshakir2292]

Hey tronics I have problem with Laptops display, Laptops turns on normally but shows no display at all but when I connect it to a external display it works fine Mine is Asus Rog 2021 with Nvidia 3060 , it has a rog logo on the back of the display that gets lit when you turn on the laptop but after this display issue the logo is not getting lit , when I start the laptop with external display it making a startup sound that it used make when display was fine but it doesn't make a sound when turn on without external display Display went black when I was playing a graphic intensive game it got black out suddenly.

[@lookitskazzy]

You should care if the "conformal coating" is nail polish or not - certain types of nail polish contain chemicals that can damage solder resist or increase corrosion to metal components.

[@Tronicsfix]

It's not just nail polish. It is actually a conformal coating

[@briandoss9232]

Dude that is a dope display on that LG...

[@marinoa5605]

@tronicsfix in the Razer, try also a BIOS update

[@gam3kid]

Is putting liquid metal on the heatsink itself strictly for liquid metal? I've seen people only put thermal paste just on the CPU not the heatsink

[@paincreatesfame]

I’ve got a Razer Blade 13’ and it’s always had issues. The keyboard has been replaced, the battery won’t charge half the time, the sound is iffy, the screen brightness likes to default to max for some reason… idk it’s just strange lol

[@madheshlogan6602]

In my Lenovo idea pad I tried to replace the pannel but when disconnecting the screen I didn't unplug the battery the backlight of the laptop is not working what should.i do now

[@zacktanda1813]

Hi I have enjoyed your videos for many years. I had a razer blade 17 2020 I used it for a good 2years. Since day one it’s done the ramping up fans. I believe it is because it has a Rtx2080 and i7 in a thin laptop. The fans only are like this when the power cable is plugged in to the laptop. And did not do it when on battery. I have since switched to a MacBook. The Razer was not broken, it is just a design flaw 😂. Also be careful putting liquid metal in laptops. The coolers I’m not designed for it. And also unlike a PS5 or a computer. A laptop is going to be chucked around more. Meaning that the liquid metal could spill out! But still enjoyed the attempt, and thank you for your effort! Keep up the good work!

[@adarshsingh7749]

your laptop and mobile repair videos are very nice

[@supercool3544]

Why in the world would you put liquid metal on a machine that is not setup to use liquid metal? this will cause issues later when its taken apart and the new owner dosent know there liquid metal, but more importantly theres nothing in place that would stop the liquid mental from getting on the components, other than the cooler, which i wouldnt trust.

[@ahmedb.hameed3330]

I was asking myself the same question! Good point.

[@hakim9785]

because he can duh😂

[@vib3s746]

Wdym the new pwner doesn’t know about the Liquid Metal? I would feel like he would tell him lol, and the new owner probably has no intentions of opening up his computer once it’s all fixed

[@GGSnOw-yt]

@@hakim9785 that doesn’t change any thing

[@hakim9785]

@Bluehatmonke emmmm better cooling? Heat transfer from the cpu too the heatsink

[@KaldDodeGitarist]

Where does he sell stuff after fixing it, and what's the link?

[@linuxares]

The LG Gram isn't fixed. You should DDU it and then restart it to see if it works after it installs it's display drivers again. Then you know it' fixed or not.

[@mtshark7]

Nicely done Steve!

[@Dtr146]

I know first hand the pain of not disconnecting that battery before messing with the screen. I was trying to fix a HP laptop that had some kind of issue with it I can't remember. I took the motherboard out and I reconnected the battery before I reconnected the screen. As I was putting in the screen connector. I heard a zap and the back light on that laptop never worked again.

[@siva4969]

Before using the liquid metal in pc or in a laptop be sure you make all the side protected liquid metal drip while traveling in motherboard it will cause short so you have make custom sponge style support that's used in ps5 do make note of this I will cause serious trouble in future

[@lorenzonavarro1336]

my ps4 is not loading games and gets stuck on a loop when i try to load fifa and when im playing a game randomly it says that the data corupted. what is wrong or what can i do.

[@L30NBL4NK]

0:21 at the center of the case, there is like a toilet seat shape, I don't even know why. xD

[@DarkGT]

The first thing you always try with display issues in laptops is to connect an external display. So you will know if is the screen, driver or the gpu related.

[@309electronics5]

Not always the gpu at fault the display connector can also die because it is in the mechanical hinge, or the mainboard can be faulty (like chips and other components)

[@DarkGT]

@@309electronics5 Or random radiation from space can flip some 1 into 0. Countless possibilities but always check with another external display before you start the board level repairs.

[@Error-yw2he]

when u have a screen issue plug a hdmi to the tv to test if the issue hardware or software

[@korinets]

How is switching to basic generic driver is a fix? Workaround at best.

[@lvl9541]

So a year and a half ago i bought my ps5 from someone on facebook. It was brand new seales in the box. It went well the first year but for the last 6 months on certain games it just overheats and black screens. I dont want to replace it and i have money to get it fixed. Was wondering if you would allow me to pay you to figure out whats going on. I do know my fan that comes from cambodia has a list of complaints on reddit i jist dont know what to do. Let me know

[@themagic8ball]

actually, I had similiar situation with fans in laptop I bought recently. I changed thermal paste , thermal pads , and everything seemed to be fine but fans kept spinning very fast when doing like literally anything. The problem was caused by windows setting cpu to 4 ghz for some reason and laptop was oerheating because of that. after changing some windows settings everything worked fine

[@Divine-uw9fq]

is there a different way to turn on a nintendo switch without po wer button in turn off mode

[@MrGetemGone]

Honestly the whole time I was talking at he screen saying it was a setting in the bios for the fans didnt think it was thermal paste and the screen issue I thought it was a loose cable too again didnt think it was the display driver computers never cease to amaze me.

[@one.2622]

Ok

[@bloodstainedchasm]

i know liquid metal just sounds cool itself but tbh i have not found one good reason to prefer it over a good quality paste... it just disolves everything it touches xD

[@TheSpotify95]

Nice, that Razr has a second M.2 slot that can be used! I'd be putting two 2TB Crucial P3's in there :)

[@setsunaes]

Why a PS5 which doesn't usually move around needs a shield to avoid liquid metal to go everywhere and frying the motherboard but a laptop (which is supposed to move around and is carried on a backpack) doesn't need it?

[@R4k05]

Please help me.I’m stuck in the troubleshoot menu on the Xbox one x.I tried everything.Factory reset,it took me back to the troubleshoot menu.I tried to do the offline system update but it didn’t register the usb stick.(i have the error code E200 00000EF)

[@cemsengul16]

Man I was flinching at 13:20 while watching you attach the LCD ribbon back inside the ZIF connector. Those connectors with a plastic locking clamp were created by satan.

[@fish_bacon]

As soon as I saw that flashing, I instantly knew it was a driver issue.

[@ArifKamaruzaman]

Remember too disconnect the battery. This guy always disconnect, thats good. I witnessed few of my collegue shorted something and broke the laptop. Blue pixie dust. If display gets wonky it's worth trying Win + Ctrl + Shift + B to reset the display driver. Not sure if it work in setup mode.

[@asuthoshcr9581]

Did you forget to disconnect the battery while working on LG gram?

[@arthurp.6869]

What thermal paste would you recommend for a laptop?

[@TheSpotify95]

I personally use Arcic MX-4

[@windowsxpprofessional]

Siggestion: make a linux bootable usb. Wothout even installing it you can just run it off the usb and find out of the issue like the screen flashing issue.

[@Kevin89866]

Can you do a video on the replacement of a 5 pole 3.5mm headphones Jack? Astro and Logitech are using them and there are no video's on 5 pole jacks especially Astro so it is low hanging KZbin video fruit. Also no one shows how to identify which wire is for what point. Also an excellent way to sell and make a commission off 5 pole 3.5mm jacks as some people have a hard time finding them outside of aliexpress I have read on reddit.

[@MisterRose90]

Not gonna lie using liquid metal to fix an overheating issue sounds like installing a turbo charger to fix a stuck intake valve in your engine.

[@coldeagle5241]

Thank you!

[@stingapig9576]

Love your videos, I have learned so much over the years. Are you interested in doing product reviews or do you have a contract with the equipment you use?

[@scottsenia]

My razor laptop would default to max fan speed all the time, would have to go in and change it back to automatic almost every time i restarted it

[@shadowrg1]

when i've been working on laptops that have issues with display drivers if they have the plugs i plug them into another display which sometimes give me enough go to uninstall/re-install drivers. sometimes happens on desktops, but mainly laptops with dual graphics cards. they are a pain in the arse to be honest.

[@johanyventura6669]

Love your channel. 👌 thank you

[@thomassouza7925]

I was hoping you could make a video on the location of screws for the ps5 digital ,did a teardown and watched your video on it but was not aware of the different sizes of screws.

[@fatal_case_of_ligma]

diagnostic for both issues should start in the BIOS.

[@tagabjmpable]

nice. you fixed all laptop issues.

[@chrisschaerli4035]

Did you check the settings in the razor? I had a similar issue after some updates on a 15”. Turned out the updates defaulted the fan speed to “max” so every time I turned it on the fans would ramp to full no matter what the load was on the laptop.

[@elwinroyale]

Uuhm wdym you fixed the gram??? You uninstalled the gpu drivers? How does that fix the issue

[@ArthurReming]

It's good that lg has a replaceable display cable because If you break the display cable you can just replace it and not having to replace the display.

[@JimNichols]

I love it... "I really don't like prying on this thing..." then literally bends it 90 degrees lol ... we are the same, you and I.. Great vids as usual.. :) peace out Steve.

[@Dtr146]

For anybody that is having that screen flashing issue. Please don't do what he did in this video. Disabling the onboard graphics for the Intel processor can lead to issues. You can disable it temporarily. But what you really need to do is make sure that you have all of your settings correct and make sure that your drivers are up to date

[@RobBowls]

By uninstalling the laptop reinstalled the graphics driver. He didn’t disable it. There has to be a driver for a video output. So, he simply reinstalled a graphics driver.

[@Dtr146]

No. He uninstalled the Intel graphics driver. Windows may reinstall it. But it also may bring back the issue. Just uninstalling it is it enough. There's other steps that need to be taken

[@fasihullahsaleem]

Believe me when you started opening LG , me thinking why why you didn't check the driver because when you first time boot it started flickering after some time.

[@tones1983]

@tronixfix what about oem printer parts hp

[@robertpage2023]

I know you did your due diligence in adding the liquid metal to increase better cooling but what about adding the same safe guard that the PS-5 uses like that black material they put around the chip to keep the liquid metal from running off into other components. It seems to work well. I'm sure that material is easy to get and would ensure that no LM would get out of place. I've seen other sites where a repair person would find LM all over the mother board because the user had the same idea as you but the LM got away from the chips. I'm going to do the same on my computer but I'm also going to get some of that material to set up around the chip. I recently did a thorough cleaning on my Dell XPS 9560 and found old dried thermal paste. The computer is over 5 years old. It runs fine but I did notice before I opened it and gave it this thorough cleaning that the fans did run quite often and the bottom of the puter was getting much warmer than normal. Right now with the new thermal paste, all is good but I want to make sure I have more years of use. So far, only problem I've had was a bad power cord end and replaced that along with the plug in. It had formed a short in the end plug where it goes into the puter power receptacle. I'm even still using the same battery but it has diminished in it's longevity. IT was originally a 6 hour battery but now down to 2 hours. This computer stays up and running 24/7 and has been from the day I bought it. Great Show!!

[@Dtr146]

There was nowhere near enough mounting force on that cooler when you put it on the first time. Thermal paste should be very thinly spread. Especially on a laptop. Even a quarter of a millimeter gap is enough to cause overheating

[@stanleyblackwell2066]

Mine ramps up on start-up because I have it slightly over locked

[@nerodante1980]

LM will get absorbed into the copper heatsinks and dry out in a few months, then you'll have to reapply them again. Using LM on copper is not really a good idea.

[@OTF_YBARRA]

I know whoever sold that LG IS PUNCHIN THE AIR RIGHT NOW

[@grumpyoldwizard]

I have to contstantly clear the dust on my Razer. It gets super hot. Of course, a i9 and 3080 ti mobile, is going to be a bit crispy.

[@wallyjavaluyas8773]

maybe the problem in razer laptop, tweaking of bios fan thats why the fan spin much??? just suggestion 💙

[@EliBustos-ty2wp]

Do you fix a Nintendo shoud witches?

[@dajayway]

My Asus gl503 laptop does that with the fans every now and then all do is plug the fan out and plug it back in and it's good for another few months use

[@koford]

unbelivable that a driver can do this, i'll remmeber this in future if i ever come across this.

[@undeadrx7937]

Hey Tronics, I've got a laptop that is potentially dead. Razer Blade 2017 14". Shows the razer logo on startup going through the bios so I know the screen works but after that the screen just goes black. Tried a new nvme ssd with a fresh install of windows to no avail. Battery was replaced by myself with parts off IFixIt and worked for several weeks before this started happening. Any interest in trying to fix it?

[@Tronicsfix]

Unfortunately, I don't offer repair services and I'm not looking for one of those for a video right now. Thanks for the offer though.

[@trevordennis]

I have a Dell XPS 15 that does the same thing sometimes. I hit the Win+Ctrl+Shift+B shortcut keys anywhere from 1 to 50 times to get the screen back on. That shortcut key resets the GPU/Graphics driver and beeps after applying it. I'll have to try uninstalling the Intel driver to see if that helps me.

[@vaidkun]

liquid metal is good for thermal transfer, but otherwise is nasty stuff the thing that it's used for ps5 (due to thermal and space constrains, also probably to make planned obsolesce) does not mean is good for everything, there is compromises to make, and most of the times (99%) on computer's CPU and GPU good quality thermal paste is good enough without all the nasty things that liquid metal can do. If you use liquid metal on laptop, it would be nice to put some foam or similar material around the die to prevent liquid metal from spilling out as laptops are caried in various positions moved and tossed around.

[@cindyjurgens1392]

why would it need liquid metal now, I'm assuming the manufacturer didn't use it??? seems weird it would need it now to run cool

[@DarkJumpBTL]

For that first laptop, I would have cleaned the fans on the graphics card as well -

[@boosted94sc300]

if you are refering to the small fans close together, im pretty sure those are fans for the battery, the cpu and gpu are usually cooled by the heatsink he removed and checked.

[@mira5751]

I think you should disconnect the battery before working on the screen connector because you could accedently send battery voltage down the GPU lines and short it out. AH OK YOU DID IT AT THE END

[@akilla214u2c]

Where can I buy one of your discounted refurbished laptops with great deals?

[@NicoAlegria]

I think that because is a gamer laptop, the owner want to have better thermals in games and general, so he touch the BIOS and adjust the fans to be full speed at some grade or similar. So I recomend check that too. Because liquid metal not use to make a huge change in notebooks, cause the true cooler sistem is the fans and radiator, and don't use to be too much powerfull in laptops, of course if the thermal paste was a bad brand and act more like a thermal insulator, but this days are all good.

[@raygv1]

Oh that’s your problem. You’re putting way too much thermal paste and that nail polish stuff. You’re insulating the cpu with that polish. You want just the thinnest possible amount of paste because what it does is fill in microscopic variances on the heating to maximize contact to the cpu and when you put gobs on you’re effectively insulating the cpu and defeating the purpose

[@JAMESMANHUNT9]

I see one design aspect with the razer that i dont like The fans vent to a space that the hinge sits in I prefer my fans to vent to unobstructed space