TSLS Review by Guy's Woodshop

Incra TSLS Table Saw System review by Guy's Woodshop

[@MacTech007]

Excellent review Guy! I have INCRA's top of the line Router Fence & Table Combo #2 with the INCRA Mast-R-Lift II Router lift and many other INCRA products. I'm a subscriber to Guy's Woodshop and love his channel and his craftsmanship. Glad to finally see a new video here on INCRA's youtube channel. This is long overdue. Hopefully there will be more INCRA videos in the near future. There's a lot of us INCRA users out here that likely feel the same as I do. Cheers, Larry B from Ontario Canada

[@felixfromnebraska8648]

Great video can't wait to get my hands on one for my shop! Felix from Nebraska

[@buster612003]

my first INCRA purchase was the Miter 5000 and I was floored with it. Ordered the TS-LS combo #1 shortly after, but have to wait for it, and it seems like it is taking forever lol. Already have plans to buy the INCRA router lift and Jessem router motor with the speed control. My wife is going to kill me...

[@Thom4123]

This is definitely going to be my next big purchase I have seen this fence on a lot of people's table saw Guy being one of them. I've done my research and then saw Guys video on the fence system and right then I put this down as a need to have item. I've been following Guy and his woodworking for awhile and I know if he endorses it it's a awesome product and also it's made by Incra and I love all my layout tools from Incra so it's a win win.

[@Smirnoff44]

brilliant demonstration ,nicely done

[@miguelasafcastellanos8702]

I bought my incra tsls joinery sistem last week and today i receive my product, is very good product. Best regards from México.

[@craigcowley7560]

I need to get one of these. In metric!

[@christophersims8628]

Guy,Thanks for the video, it is very informative and detailed description. I do have a question. Does this table saw fence have the ability to make adjustments to ensure the fence stays parallel to the blade and or miter slots?

[@sumosprojects]

Incra make reputable top quality products that lean closely toward toolmaking accuracy, it's a little overkill for basic woodworking but if you save your pennies a worthwhile investment for higher level accuracy

[@MAGAMAN]

Dammit, Incra is going to take all my money! I have the incra 5000 and absolutely love it.

[@MAGAMAN]

Well, after a lot of consideration, I decided that this is just too damn big for the space I have. I would have to move the fence up against the blade every time I wanted to walk around the saw. Maybe in the future if/when I get a place where I can set up an actual shop, not just a garage.

[@patriotwoodworker6092]

Hey MAGA man, (live the name btw) did you figure a way to get the fence? I understand space can be tight sometimes. Just lower the blade and move the fence to the middle. I have the 32” rail. It’s a total of 6’ so not much longer than a typical saw with wings. Now I need that incra 5000. Lol

[@jimchallender4616]

Great Incra Intro Video - It is one that led to purchasing the Incra 32 TS LS with Left side Router Table (Combo 1) which arrived this afternoon. Do you know of any sites that help with attaching/installing the TS LS on a RIDGID 4312 Table saw or any table saw .

[@3DCarve]

Hi, I would love too use this and I have 1 question. My selfbuild tablesaw/routertable is not 100% level. Is it possible that the fence can run slightly above the surface? Lets say 1 or 2 millimeter? I hope to hear from you soon. Kind regards, Rinus from The Netherlands

[@mr.b6374]

I have the entire INCRA System but went for the whole enchilada and bought the 52" setup, haven't set it up since I will be moving into my new property in about a month, it already has a 40 x 54 out building!! So it's time to start thinking about the shop layout, I was wondering what your out feed table is? And do you have a video of it? Great informative video !

[@incratools]

Good luck with the new shop! You might want to visit Guy's Woodshop youtube channel and take a look at his "Shop Tour August 2016" video. He talks about the outfeed table and I am sure he would answer any additional questions you might have.

[@coincollector315]

I ordered mine yesterday. They are about two months behind on manufacturing because they are so popular. UPDATE> Got it way ahead of scheduled and cant be more happy with it.

[@UloNgApo1]

can you describe how you made and connected your outfeed extension table. Did you use the Incra router table hardware?

[@GliderFlyer22]

Sorry, I'm not able to answer that directly as this video was created by one of our customers. I'd recommend checking out Guy's Woodshop youtube channel, and Guy can provide specifics.

[@patriotwoodworker6092]

Guy, where did you get the shirt?

[@anatoliyefimov4984]

Given that the positioner range is only 32" long, how to you set it up for a 52" fence?

[@codyfawcett7287]

maybe next Christmas/Blackfriday! I want the whole damn kit!

[@beyondthebirdhouse4796]

Cody Fawcett - I haven't seen them go on sale during Black Friday, and I'm on their mailing list, Incra controls vendor pricing, so don't expect them to discount either (think Festool)

[@Stocki200]

Hi Guy, can you please tell me which saw are you using? I really like your setting. All the best from Germany Joe

[@user-cg6ue4gq1u]

He did reply to you?

[@michaelnorman5640]

Powermatic

[@takeniteasyfriend]

Yes, my engineering brain has gone into overdrive 😎

[@GOOD_FURNITURE]

中国地区怎么购买？

[@Yarolightcom]

Вот бы русскую озвучку...