TTS-55 | Installation Tutorial

📚This video will show you how to assemble TTS-55
00.08：Install the Frames
01.00：Install the footpads
01:55：Check the Y-axis Pom wheel
02:40：Install the Carriage
03:20：Assemble the tensioner
04:20：Install the X-axis
05:45：Install the laser head
06:24：Adjust the carriage
06:37：Install the bellows holder
07:37：Install the motherboard box
08:10：Install the bellows
10:20：WIRING
11:00：Install Fixed-length columns bolder
11:41：ADJUSTMENT
----------------------------------------------------------------------#twotrees
🚩 For more info or help please find
Tech or After-sales Support: service @twotrees3d.com or Whatsapp:[phone]
Members' Support: / twotr. .
For buying please directly go to TwoTree's official shop: www.twotrees3d...
-----------------------------------------------------------------------#laserengraver
#laserengraving #laser #laserengraved #lasercutting #co #lasercutter #lasermarking #lasermarker #lasercut #fiberlaser #custom #laserengrave #engraving #lasermark #cnc #diy #handmade #personalized #laserengravingmachine #laserco #woodworking #lasermarkingmachine #gifts #lasermachine #gcclaserpro #laseretched #lasercuttingmachine #cncwoodworking #gccworld

[@aetherdaniela]

hola, compre esre modelo pero no se como instalar la configuracion en el celular, tienes algun enlace?

[@Twotrees3Dofficial]

Dear, you can follow this tutorial to set it up. wiki.twotrees3d.com/en/LaserEngravingMachine/TTS-55PRO/SoftwareConnectionTutorial

[@poubelanjos4192]

Acabei de comprar, estou ansioso para chegar.

[@Twotrees3Dofficial]

Thank you for your support of TwoTrees. I hope your work goes well. Please do not hesitate to contact us if you have any needs. We look forward to sharing more interesting ideas from you.

[@poubelanjos4192]

@@Twotrees3Dofficial muito obrigado.

[@guilhermeolivera4163]

tem autorizada no brasil a minha parou do nada

[@janetdietrich6861]

Purchased (Temu) recently but haven't trouble assembling --any suggestions??

[@Twotrees3Dofficial]

First of all, thank you for your support, what kind of assistance do you need?

[@diegonunes5694]

Perdi o pen-drive para instalar o software da tts 55. Como posso fazer sem ele????

[@Twotrees3Dofficial]

Dear, you can reach out to the after-sales engineer for help via the email address [e-mail].

[@jdo62]

Can a rotary attachment be used with the TTS-55? If it can be used, how do you connect it?

[@Twotrees3Dofficial]

Hi, first remove the box of the motherboard, unplug the Y-axis motor cable on the original motherboard, and then replace it for direct use. If you don't understand anything, you can contact our technical staff: [e-mail]

[@daleadkins2298]

Can these come pre assembled

[@Twotrees3Dofficial]

Hi! Of course. If you want to know more about TwoTrees TTS series information, you can click the link to get: www.twotrees3dofficial.com/collections/tt-series/products/laser-engraving-machine-tts25-tts55?variant=43654661734620

[@guizanardo]

does it work if i plug a tft display on the motherboard?

[@Twotrees3Dofficial]

Yes, it will work.

[@anonymous-wx5xu]

I would love to review your laser engraver machine.

[@Twotrees3Dofficial]

Hi, you can click on our homepage or our official website to learn about the models you are interested in.

[@anonymous-wx5xu]

@@Twotrees3Dofficial its expensive, will you give me discount?

[@Twotrees3Dofficial]

@@anonymous-wx5xu Hi, you can check the website for discounts, or consult our customer service. www.twotrees3dofficial.com/

[@italocastro1845]

já deveria ter o manual em portugues. mas a máquina é muito bonita

[@Twotrees3Dofficial]

Thanks a lot.

[@trashboi-bk]

Thanks for the instructional video, would love to see an example of how the air assist would be set-up with the machine out of the box as well.

[@lilfendiiofficialpage]

My first set of screws said M5 20X8

[@Twotrees3Dofficial]

Hello and welcome to Two Trees! How may I assist you today?

[@DrKnow186]

Po co są te paski na rogach i czemu mój laser jest trochę inny ? Ma z boku guzik włączania a nie u góry i laser ma jakiś gorszy montaż, wysokość reguluje tylko jedna śruba z boku, źle się to sprawdza

[@Twotrees3Dofficial]

Dear, you can reach out to our after-sales engineers for help via email at [e-mail].

[@j.a.c.g.7673]

i think i'm to stupid but isn't the video upside down?, I mean the video was taken by someone in front of the hands guy and it confuses me :(

[@mauricezeida9872]

J'envisage payé,mais j'utilise un téléphone portable Camon 17 pro, la machine est livrée avec l'application s'il vous plaît ? En plus je veux savoir si cette TTS 55 peut couper un contreplaqué de 3mm en une coupe ? Si oui ça prend combien de temps pour la coupe s'il vous plaît ? Merci beaucoup

[@Twotrees3Dofficial]

Search and install MKS Laser in the app store or browser, if you can find it and install it, you can use it. One cut is fine, depending on the size of your cut, the time is also different.

[@mauricezeida9872]

@@Twotrees3Dofficial okay thanks you dear friend