TTS 55 PRO | Assembly Video

[@wagnerrlima]

One of the best laser engravers, easy to use, with many expansions and accessories that make the job easier and more efficient.

[@garys6583]

Nice video and great to see TT has tweaked certain things but limit switches should now be standard

[@Twotrees3Dofficial]

Thank you for your recognition and feedback. If you need any assistance, please do not hesitate to contact us.

[@vuyiswamalebye4744]

Does one need to purchase a base for the machine or I can use it on top of my table??

[@Twotrees3Dofficial]

Dear, to prevent any unexpected situations, we recommend that you purchase honeycomb panels.

[@vuyiswamalebye4744]

​@@Twotrees3Dofficial Are there any other additional things that I'd need to purchase?

[@Twotrees3Dofficial]

@@vuyiswamalebye4744 Dear, these two products are already sufficient to meet your current creative needs very well. You can first enjoy the convenience they bring, and then gradually add desired accessories such as a rotating axis according to your actual needs, in order to further enhance your creative environment.

[@OliverWolters]

Could you make a video on how to upgrade this machine with the 20W Laser Module? Are there any changes to make in the settings in LightBurn when upgrading to the 20W module? Thanks in advance!

[@TheGCode86]

Are the wiring configurations for the extension upgrade on the previous base model TTS 55 the same as the TTS 55 pro? Or are they not compatible?

[@Twotrees3Dofficial]

Hello! My friend, please click on the link for more details: www.twotrees3dofficial.com/

[@diegoi]

Estou tendo dificuldade com a correia e o tençor, não sei como encaixou tão facil no video

[@resin-art-and-3d-printing]

I have just purchased one of these to use along side resin projects Where can I find the production lot number of the machine which I purchased as its saying on the website there is a Firmware update and not sure if I need to update it or not

[@Twotrees3Dofficial]

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at [phone] or emailing, [e-mail] to get a faster reply.

[@DarrenC-420s]

Mine was easy to put together but doesn’t work because one the wire lines are to short and stops it being able to move correctly

[@Twotrees3Dofficial]

Dear, you can contact our after-sales engineers with any questions at [e-mail].

[@samy1742]

Pregunta las correa que tienen los ejes x, y ya vienen listos o ahí que aflojar los tornillos y pasarla por (las ruedas de color negra )

[@Twotrees3Dofficial]

Dear, you can reach out to our after-sales engineers for help via email at [e-mail].

[@andreamedeiros7947]

Estou tendo problemas com laser da minha máquina de sua marca. O laser não desliga, ele fica contínuo. Alguém que possa me ajudar por aqui?

[@Twotrees3Dofficial]

Dear, you can reach out to our after-sales engineers for help via email at [e-mail].

[@andreamedeiros7947]

@@Twotrees3Dofficial Farei isso, obrigada.

[@ensambat4945]

Which one is better, the tts 55 or tts 55 pro?thanx

[@Twotrees3Dofficial]

pro

[@RymonLo]

Which is better, the tts-55pro 40w or the tts-10 80w?

[@Twotrees3Dofficial]

Dear, you can reach out to our after-sales engineers for help via email at [e-mail].

[@Kirah_ww]

Can't find the thing to tighten the laser module???

[@atelieiuiujhujhu]

QAL a configuração correta para cortar MDF 3mm obrigada

[@adriantudor2318]

I’m having trouble installing the laser part. It won’t slide down during that step. It’s like it doesn’t fit. Any tips?

[@Twotrees3Dofficial]

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at [phone] or emailing, [e-mail] to get a faster reply.

[@adriantudor2318]

@@Twotrees3Dofficial thank you, I just reached out to them.

[@tvmultimidia9398]

Eu comprei uma Ts2 e o sensor antichamas não funcionou e eles não resolvem

[@Twotrees3Dofficial]

Please send your details to email: [e-mail] She will help u.

[@artyshtulush826]

здравствуйте не могу подключиться через wifi к лазеру с мобильного телефона

[@Twotrees3Dofficial]

WiFi has two modes: STA and AP. AP mode - the machine sends out a signal. STA mode - the machine receives the signal. When the machine is switched on, if the mobile phone can search the wifi name ‘DLC32+number’ or ‘laser+number’, the machine is in AP mode. AP Mode - The machine is in AP mode. AP Mode Fixed password is 12345678 Fixed ip is 192.168.4.1. STA Mode - This is done through the LaserGRBL software. This is to be set up on the machine network via the LaserGRBL software. The IP is assigned by the router or transmitting device and can be obtained from LaserGRBL. Suggestion: use your mobile phone's wifi.

[@margaritacoleto5471]

Buenas tengo esta máquina pero estoy teniendo problemas para cortar madera de 1.5mm no se que parámetros hay que poner porque solo me hace grabado. Alguien me puede ayudar estoy con Grbl

[@Twotrees3Dofficial]

Hello, friend. Would you like some help in the process of operating the machine? we recommend contacting the after-sales engineering department on Whatsapp: at [phone] or emailing, [e-mail] to get a faster reply.

[@rahmaboudouda4473]

la machine découpe le delophane ou non ?