Programming fob for 2001 to 2007 Toyota Highlander

[@mnhanna1]

It worked the first time you did it. The reason why it cycled was because you were in the car. You have to get out if the car and press the lock button to verify that it works. Cheers.

[@markvermeulen1372]

That’s not correct.

[@reubennwadibie340]

Awesome! You just saved me sum cash. Got my key fob for less than $5 and wasn't sure it would be any good. But after following your instructions it worked great! Thank you so much and God bless you.

[@tubejim101]

Your welcome :)

[@sjkali408]

This video help a lot. The actual instructions provided on the product website is inaccurate. Thank you for sharing this. Also I encourage everyone to like and comment if you also resolve!

[@tubejim101]

Thank you :)

[@gusjimenez3130]

Thanks man!!! Months ago i bought a 03 highlander but it only had a key. No fob. I found a key n fob from a scion, which looks a lot like the toyota from those years, i did the activation steps, did it 4 times n on the fifth, i got it!!! Thank u so much!!!

[@tubejim101]

Thank you! You made my day :)

[@johnbaxter9458]

After holding down both buttons for two secondd and then the lock button for two seconds, the missing last step that finally made the fob work was to open and close the door once.

[@shanetyler9391]

I programmed a Transponder Key for one these vehicles once we still own it and you can program up to ten keys. but need to program another fob though to match!

[@markvermeulen1372]

What’s a transponder key?

[@mse2646]

Thank you so much! This worked for my Avensis 2001, after trying several other instructions this was the right one for me.

[@tubejim101]

Your welcome :)

[@melindastevens46]

Just bought 2005 Toyota highlander and need to get a fob. Thanks so much for this!

[@tubejim101]

Your welcome :)

[@gothman21]

It worked million thx from Australia :) 🙏

[@tubejim101]

No worries

[@Kanoemirate]

Thanks, you saved me $50= 110 litres of gas. Even though I've to watched some other videos to learn how to erase preprogrammed remotes. Yours is the only way my car get to programming sequence.

[@tubejim101]

Your welcome :) Glad the video helped you out.

[@gilbertoarturofigueroaarit6225]

Thanks a lot this video helped me so much , you have a new suscribe

[@kustmz3337]

Works but your video has far to much gap between steps. Most people are trying to follow along with you at the same time.

[@bejamincordero8466]

Para un Corolla Toyota 2012 actualizar el control como puedo hacerlo

[@Gubeach]

Worked with my 2006 highlander hybrid! Thank you so much!!

[@tubejim101]

Your welcome :)

[@jimjam5570]

You gotta double click unlock to open everything besides the driver door...

[@volleyballDave]

Pressing unlock once should unlock just the driver door. pressing unlock twice should unlock all the doors.

[@slam5534]

My car wouldnt go into the programming mode. I made sure i did the steps and did it countless times.

[@stevozxl]

same what is wrong with our cars bro

[@markvermeulen1372]

@@stevozxl where was the car manufactured? Year and engine number?

[@stevozxl]

@@markvermeulen1372 too late bro i got a whole Altima now

[@shawnmatthews5118]

Your video was spot on.

[@rvrthegoat]

After step 10 the locks cycle twice. When I go back to step 8 and complete that step the locks won’t cycle again for some reason.

[@tubejim101]

Give your local locksmith a call, and ask him how much it will cost to have him do it. Depending on your area, it might not be that expensive.

[@timaraburgess2858]

The last step is to open the door and press lock

[@21MASSA]

“I have to go and see my shrink tonight,” after watching this video....this video actually traumatized me.

[@kimberlyw3468]

Thank you for this video! It worked!

[@tubejim101]

Your welcome.

[@ryuhosuke]

just tried it and it worked.. the other instructions provided by another company didnt work

[@tubejim101]

Glad it worked. It is tricky. Lots of steps.

[@Bardo424]

I have a 2006 highlander, i programmed new fob and it unlocks and locks but the alarm goes off whenever i unlock the door after security system turns on

[@tubejim101]

Is the alarm after market?

[@markvermeulen1372]

@@tubejim101 I have a 2003 Toyota Highlander it has a hornet 700 T aftermarket immobilizer Alarm horn. I was unable to program my keyless FOB. I was moving through the process. When the door locks were supposed to cycle. They never did. But right then, my immobilizer started alarming. It continued 3 cycles. As soon as I put the key back in the ignition. The 3 cycle immobilizer alarm starts all over again. I was unable to start the vehicle. Something very unique and special happened I had to pull the plug on the hornet immobilizer. I think your procedure process might’ve broke a code in my vehicle OEM Keyless entry module. Do you have any idea where the keyless entry module is located?

[@markvermeulen1372]

To the guy with a 2006. If you have a security system immobilizer. And the security system is activated by locking the door with your wireless key-fob. Would you not expect if the door is somehow mysteriously opened. Lets say from the inside and you pull the handle. would you not expect the alarm and immobilizer system to go off as it’s designed to do?

[@Bardo424]

@@markvermeulen1372 the security system isn’t being activated when i lock the door with the key fob … all the key fob’s doing is unlocking and locking the doors. The security system is activating by itself about 20 seconds after I lock the door. All the programming did for me was get the fob to lock and unlock it did nothing with the security system smartass

[@tubejim101]

@@markvermeulen1372 I do not know where the keyless entry module is located.. A lot of custom stereo shops have a guy who does alarms. I would find a shop, and pay them a few bucks to set you up. For them it is fast and easy.

[@ocheboy]

Hi. My highlander did not cycle and it doesn’t have the security light thing on the dash close to the steering. How do I add a fob ?

[@tubejim101]

What year is Highlander?

[@ocheboy]

tubejim101 2006 highlander.

[@tubejim101]

Because you don't have a security light, it sounds like it has been modified. Best bet is to call your local locksmith.

[@ocheboy]

tubejim101 okay. Thank you. The place for the security light is blank only the rear aC heater switch is there. Could it be that the wireless receiver has gone bad?

[@lilybeasley5826]

@@ocheboy I have the exact same car and it didn’t cycle for me either. I have the blank spot where his security light is.

[@gabrielmendez7785]

What do I do if the car won’t accept the new key fob ?

[@tubejim101]

A locksmith can do it for you. Depending on your area, it might not be that expensive.

[@ratataran]

You need to get the right type of key fob

[@PCMKR-xe2vx]

Does this method work with any type of car remote or needs to be specific new Toyota remote? Right now I'm using 2 remotes one is aftermarket remote to arm and disarm the alarm and another (OEM Toyota) remote to lock and unlock the door. Thanks 👍

[@tubejim101]

As long as the fob says it will work for your year, make, and model, you should be good.

[@aboaz1200]

Hi dear.Please look for a way to program the Center Lock Toyota Sequoia 2002. I have a problem that the ash device does not work. It gives a signal, but it does not lock or unlock the device. Note that all doors operate a manual center lock, please help.

[@daveeste9]

Thanks for the video it helps

[@tubejim101]

Your welcome.

[@msgospel]

It will work on my 2006 Camry???

[@tubejim101]

Not the fob used in this video.

[@MyFlexinIsAProblem]

It worked for me. Thank you very much

[@tubejim101]

Your welcome :)

[@Ttran1968]

Will this work for 2011 highlander ??

[@tubejim101]

Here is a list of vehicles: amzn.to/2qBYkza

[@lapangan2029]

I bought a repo 2004 highlander and it only came with one key with no fob. buying this and doing your tutorial should solve my problem right? thanks in advance

[@tubejim101]

Should work.

[@hbostars]

Thank you for the video. It workt after this video. Best regards

[@doublexavier]

You should redo this video with ONLY the CORRECT procedure. Wastes a bunch of time watching you fail and it is confusing! THANKS!!

[@tubejim101]

Afraid your confusing me with a professional. I'm lucky to even get this far. A locksmith can do it for you, and they used to not cost that much. Not sure what they charge now days.

[@andynguyen8738]

The steps you do is more complicate than activate the atomic bomb button.

[@tubejim101]

I did not come up with the steps. Just show them. A locksmith can do it for you. They would not charge very much for this.

[@83sanat]

It is not necessary unlock a lock with a button the key thank you for the video I got my remote control

[@tyanxoxo]

It happens cuz u inside the car

[@bramleyhawkins1744]

I got the key fob reprogrammed, but only the driver’s door unlocks when I double click. How do I make all doors unlock when I double click?

[@tubejim101]

What year make and model are you working on. Also, double click it, and check all the doors, to see if any others unlocked.

[@akinyinkaoluseyi7110]

changed some seals around the cylinder head cover of my Toyota highlander 2005 due to leaks . After placing the battery back I can not find the remote control fob so I can not start the car because the horn keep sounding and the car can not start. Please kindly tell me what I can do to start the vehicle.

[@tubejim101]

A locksmith can help you out.

[@naromofficial6049]

How do you exit the admin mode or does it exit on its own? Also my car has never had a FOB before (atleast when i bought it used) will this still work or do i have to get it from the toyota dealer first?

[@tubejim101]

It will get out of admin mode for you. You should be able to do this without the dealer.

[@KellyEUTAH]

Would anyone happen to know what takes place to make the fob stop working in the first place? All I can think of where mine in concerned, is that my sunroof leaked into the car, while out in a rain storm. Mine stopped working after that day. I'm going to try this procedure, and hope for the best. But I think my power locks are fried. I'll update if this worked.

[@tubejim101]

Some auto parts stores have testers. Maybe your luck, and it is your battery.

[@KellyEUTAH]

@@tubejim101 I did have to replace the battery earlier this year, and it didn't seem to effect the fob. I'm thinking that some wiring got waterlogged. It's been weeks since that storm happened, and the fob still isn't working, but the power locks seem to still be functioning properly. I tried doing the reprogramming last night, and the locks never signaled to be ready for programming. I did it twice. Maybe it's a fuse that blew. I'll have to look into that next.

[@Astroviajero]

God blees you man, your video help me a lot. Thanks so much. The instructions from the company is garbage.

[@aboaz1200]

Greetings. I programmed Al Ramrod as a Toyota Sequoia 2002 in the same way as the video, but it was not programmed .. We would like to know the reason, please thank you.

[@tubejim101]

kzbin.info/www/bejne/fqHWeZuEhMZ3m9U

[@tubejim101]

This key fob: amzn.to/2wyXhrq

[@aboaz1200]

@@tubejim101 Dear Friend. I did all the steps in the video, but when setting the switch to the initial operation, the lock does not open and automatic lock .. What is the reason for that? Does not working

[@tubejim101]

If you are not able to program it, you will need to have the dealer, or a locksmith do it for you.

[@aboaz1200]

@@tubejim101 Thank you for your response .. Greetings to you

[@michaelnalepsinki1416]

does this include the remote start, i have a keyless remote, the lock unlock works, but auto start does not, 2005 higlander, will these steps make auto start work?

[@tubejim101]

Is the remote start a factory installed option, from Toyota?

[@michaelnalepsinki1416]

aftermarket, Clifford XR OL some sort of model, it has no signal light on the transponder unit, nor the key chain remote, tried checking their website and cant find my model, key chain also has no valet switch on it,or that i can find on the car, if i press the"*" button 3 times, it cycles through some things and headlights blink 4 times, and it does that 3 times. Actual unit doesn't even say "start" its just a "*" symbol

[@tubejim101]

Not sure. It looks like on the Toyota ones, you press the lock button twice, then hold it for 3 seconds, to start the engine.

[@michaelnalepsinki1416]

thats what i did with the "*" button, ill try it with the lock button, and report, and if that doesnt work?

[@blink99v]

michael nalepsinki ok so all it did is set the car alarm off, this is blinky

[@alexle7964]

Got it to work but not sure why I have to program every week or so.

[@tubejim101]

Maybe car or remote battery.

[@alexle7964]

I put in new battery already, so what do you mean by”car”?

[@tubejim101]

@@alexle7964 Anytime you have an electrical issue, you should check your car battery. All the local auto parts stores, in my area, will test your battery for free.

[@alexle5026]

@@tubejim101 I put in anew battery and the same thing happen, every 2 weeks or a month I have to come back here and see your instruction all over again. Any ideas?

[@tubejim101]

@@alexle5026 Have your alternator, and battery tested out at your auto parts store.

[@mohamedfarhat74]

Big thank you

[@tubejim101]

Your welcome :)

[@karensok2123]

Could you redo the video again?

[@tubejim101]

The description has the procedure typed out.

[@Cyberdemon1985]

Redo the video as people want to see the steps played out.

[@masonarmsapts9721]

Great. It worked. Thank you.

[@tubejim101]

Your welcome

[@Vera-xu3xw]

Thank you worked great

[@tubejim101]

Your welcome :)

[@djlive408]

If I have to change the battery do you know if I have to re program it?

[@tubejim101]

That's a good question. Let us know how it turns out.

[@djlive408]

tubejim101 haha ok

[@brianchisnell1548]

Learning on camera

[@fahedmahases723]

does it work on 2008 toyota highlander

[@tubejim101]

No.

[@ramyram8874]

Can I program Toyota Camry remount key into Toyota Highlander 2007?

[@tubejim101]

Think you can.

[@ramyram8874]

Thank you

[@tubejim101]

Let me know if it works.

[@ramyram8874]

No it did not work I think there different

[@tubejim101]

What year is your Camry?

[@jorgecruz5146]

Would this work for a 2001 Toyota Corolla?

[@tubejim101]

Which model do you have?

[@jorgecruz5146]

@@tubejim101 S

[@tubejim101]

@@jorgecruz5146 Think this one might work for you: amzn.to/3mIq82B

[@deadbeatproz]

Will a highlander fob work for a 2004 sienna van?

[@tubejim101]

This one should work: amzn.to/2ELr2Jh

[@adebayoaliu3052]

adebayo aliu

[@chriskeelor799]

Can you buy one from an auto store or does it have to be from Toyota? I just bought a used 2003 Highlander and it not come with a fob.

[@tubejim101]

As long as it is for a 2003 Highlander, it should work.

[@chriskeelor799]

tubejim101 Good to know, also I seen one on amazon for $10 will it work the same as the one sold from Auto zone for $90? It says it is complete with electronic insides, it does not say it is just a case. Thanks again.

[@tubejim101]

That's is all between you and the place you buy from. Here is a nice looking one: amzn.to/2qBYkza

[@chriskeelor799]

tubejim101 Sorry I may have been wrong on the price, that looks like the one I was looking at on Amazon. If it works for that price I will gladly try it out.

[@tinalouise632]

Junk yards theyre like 5 bucks. Just have to google what it looks like/ numbers on the back

[@tiffanyaracena4953]

What if my fob only has one button for the lock/unlock?

[@tubejim101]

What year, make, and model is your vehicle?

[@tiffanyaracena4953]

tubejim101 2001 Toyota highlander

[@tubejim101]

@@tiffanyaracena4953 This fob should work: amzn.to/2qBYkza

[@tiffanyaracena4953]

tubejim101 okay thank you so much!

[@TuX0r]

Is that a generic fob?

[@tubejim101]

Will work for any Toyota compatible fob.

[@TuX0r]

tubejim101 I need to try this on my truck.

[@MikeOrosco]

I lost my key and key fob where do I get a new one?

[@shanetyler9391]

try ebay

[@gamerblaster8013]

Loved it

[@ramyram8874]

Perfect thanks a lot :)

[@tubejim101]

Your welcome :)

[@ngunthalential8997]

I

[@privatsauveur8206]

Good job

[@billding7073]

Many thanks.

[@tubejim101]

Your welcome :)

[@johnpaulndiaye277]

comment désactiver l'alarme sur ma toyota highlander 2003, please

[@tubejim101]

Je suis désolé. Je ne sais pas comment

[@johnpaulndiaye277]

merci en tout cas

[@johnpaulndiaye277]

il parait qu'il faut tourner la clé en position on et en position off 5fois c'est que mon anglais est moyen

[@antoinetteisrael3186]

Thank god Amen.

[@toyotacorolla8837]

Amen 🙏🏿

[@drawohsfc]

Thx

[@tubejim101]

Your welcome :)

[@lilybeasley5826]

This didn’t work on my 2006 base highlander 😭. Never went through the cycle the first set of steps

[@tubejim101]

Next stop Dealership. Let me know if they charge you.

[@lilybeasley5826]

@@tubejim101 I watched another video and it worked this time! When you do the second set of the key in ignition no turns, only did it once and after completing it went through the cycle

[@tubejim101]

@@lilybeasley5826 Glad you got it working! It is sad how strange they made this procedure. Feels like Microsoft wrote it.

[@Oboetoke]

Easy

[@albertoarias9978]

Its very confucing... No good sorry try again

[@tubejim101]

We used to joke: If Microsoft made cars. Now it's not funny.

[@ROCKSONGS1000]

Worked fine for me, try focusing on the descriptions list, thanks for the video

[@markvermeulen1372]

@@ROCKSONGS1000 where is this mysterious description’s list?

[@ROCKSONGS1000]

@@markvermeulen1372 in the description of the video

[@ОлегПетрушкин-э8щ]

Ok

[@breyhamilton3419]

Why post the video without the proper steps? Lol

[@tubejim101]

Check the description.