Tune Up Your Drill Press

  Рет қаралды 600,626

WoodworkersJournal

WoodworkersJournal

Күн бұрын

Пікірлер: 189
@JustinShaedo
@JustinShaedo 2 жыл бұрын
11 years later, still the best video on YT for drill press maintenance
@ppstonesanchez1590
@ppstonesanchez1590 Жыл бұрын
As my friend Justin that is here below me says, this is still the best video for drill press maintenance.
@Olliinn
@Olliinn 10 ай бұрын
Searched this up because I got a dirt cheap used WEN press that could use some love, Now i want to buy an old beat up one and restore it with the info from this video. Very helpful many years later
@AliHureiby
@AliHureiby 10 жыл бұрын
that variabel speed pulley system is really nice invention :D
@dyode1
@dyode1 3 жыл бұрын
Thanks for going to the trouble of making such a focused and straightforward video. Learnt a number of things I was getting wrong on my drill press. Cheers!
@MAGAMAN
@MAGAMAN 7 жыл бұрын
To people complaining about the fingernails; He's a guitarist. The fingernails are only long on the right hand and are well groomed and they are short on the left hand. This is very common for classical guitarists and other styles that use finger picking.
@markfbeyth56
@markfbeyth56 6 жыл бұрын
MAGA MAN Was
@markharris5771
@markharris5771 5 жыл бұрын
Mark Beyth Why "was"? Has he passed away?
@robertcoggin3366
@robertcoggin3366 Жыл бұрын
I knew this right away, lol
@mustang5147p
@mustang5147p 8 ай бұрын
Very good tutorial! Simple and detailed at the same time!
@jeffbeck6501
@jeffbeck6501 6 жыл бұрын
This was actually a really good video.
@danhartman9087
@danhartman9087 8 жыл бұрын
At about 8:45 you talk about removing runout and wobble from your drill press. I searched videos several times and couldn't find it. Would you provide the link to that reference? Thanks in advance.
@biophiliac9
@biophiliac9 8 жыл бұрын
Did you ever find that article? I need to remove runout as well.
@danhartman9087
@danhartman9087 8 жыл бұрын
No Sir, and they never answered back. Still haven't found that info.
@WoodworkersJournal
@WoodworkersJournal 8 жыл бұрын
Unfortunately, the article that the host is referring to is not available online at this time. We will work on republishing those instructions. You can find his complete drill press maintenance instructions on this DVD: www.rockler.com/woodworkers-journal-power-tool-maintenance-dvd-rom
@czar89031
@czar89031 8 жыл бұрын
good information is from Matthias Wandel an expert of woodworking he has his web site,.
@facesmasher4216
@facesmasher4216 6 жыл бұрын
biophiliac9 the run out is very simple to check & it could easily be checked w/ a dial indicator that has a magnetic base if you have one of those measuring instruments - if you rewind the video as many times you'll need it to finally get it you"ll see it the video was made for informational purposes only but if you need more info on the operation of such device just do the part of your home work and narrow it w/ google on 'how to use dial indicator' and you'll find thousands of videos, web sites, forums, articles and literature concerning that specific topic, or simply go to a public library to search for that info - is that simple i hope you'll get it at the end
@lloyd.plywood2328
@lloyd.plywood2328 10 жыл бұрын
That was very helpful, Sandor.
@olusabaolukayode9191
@olusabaolukayode9191 4 жыл бұрын
Thank you. Your tutorial is a superb one, if practice regularly will definitely put the machine into order for a very long time. Thank you for your painstaking work more grease to your elbow.
@SoilentGr33n
@SoilentGr33n 10 ай бұрын
I was given an old Mastercraft drill press. This is fantastic information.
@michaelbradford4444
@michaelbradford4444 2 жыл бұрын
I've been completely negligent to my drill press ! Ty for the wake up call and the valuable info....great video!
@foxfire8284
@foxfire8284 9 ай бұрын
I got a 42 year old drill press for $20. It's a central machinery model 884. One of the chuck jaw "teeth" is considerably lower than the other two and i was wondering if that is why the drill bits seem to become bent (I'm not sure if the bits are actually bending or if they are just falling out of alignment, i hope it's the alignment option) when in use. The chuck is rusty, but i used some steel wool on it while having it on (probably not the best idea as too much pressure will cause it to rip the steel wool right out of your hand). I was wondering if you could tell me if that jaw tooth being more advanced than the other twi would cause the bits to either fall out of alignment (preferred option because i don't have many bits),or cause them to bend. It kinda seems like it is the alignment option because the whole bit seems to be affected.
@BadgerLaser
@BadgerLaser 3 жыл бұрын
wow i never saw variable speed like that - wonderful thing!
@GeofDumas
@GeofDumas 12 жыл бұрын
there's usually a lever between the motor and the press arms. near that lever, as well on the opposite side of the press, there is a knob. loosen both of those knobs, then pull the lever in the direction that provides resistance. you can confirm that it is being tightened by opening the top of the press to view the belts. While maintaining pressure on the lever, tighten one, then the other knob to lock the belt tensioner.
@revtmyers1
@revtmyers1 5 жыл бұрын
What if you have a similar one and no matter how hard you hit it the spindle doesn't come out of the quill? Trying to troubleshoot some run-out that I have.
@SpringRubber
@SpringRubber 4 жыл бұрын
Excellent video. I just picked up my first drill press (used) and am learning some new terms, like "quill".
@cpk313
@cpk313 Жыл бұрын
I have the bench top version of that Ryobi and it has runout that is unfixable
@markkoons7488
@markkoons7488 3 жыл бұрын
Got a Powermatic 18" VS drill press at auction. It is and was like new but the variable speed drive rattles and squeals throughout the range of speeds. Do you or any of your viewers have any suggestions how to improve it? The belts and pulleys appear new with no signs of wear but upon removing the plastic shroud I found fine powder covering everything. The powder seems to be ground rubber. Help!
@dekurvajo
@dekurvajo 8 жыл бұрын
Köszönöm Sándor. I am about to buy a 10" variable drill press, and i am pretty sure it will needs a few fine adjustment. What i have read about this model, the chuck itself tend to wobble. I am not sure if its just because the sloppy assembly, or better to totally avoiding to buy it? This is a WEN 4210.
@MediaFilter
@MediaFilter 7 жыл бұрын
Depends what you're doing with it. In my view... a stable chuck / arbor is the most important part of any drill press. Don't settle for less. Check out shopfloor models where you can, to test stability.
@dekurvajo
@dekurvajo 7 жыл бұрын
Thanks a Lot. I already got the drill press. There is no problem with accuracy and everything seems fine. Except 1 issue only one time. The chuck came off from the arbor. I really hope it was my mistake when i was installing the chuck on the arbor first time. there is no issue since, but i keep my eyes on it.
@sam111880
@sam111880 9 жыл бұрын
yes using a dial gage for checking the drill bit is not angled in the spindle and checking the press table for squareness between it and drill bit with a straight edge is definitely a major thing to do for precision hole making
@jeffdeluca1153
@jeffdeluca1153 11 ай бұрын
What German made adapter did you buy. Thx
@willebiggz
@willebiggz 7 жыл бұрын
hello. i have an old drill press that i would like to tune up.. it is actually the same as the second press you show in this video. it is a craftsman king sealy.. i understand that the methods you show are universal but i have some questions about that specific model..can you help me out are should i just buy a new press?
@supurbian
@supurbian 8 жыл бұрын
i have that same drill press but unfortunately don't have the owner's manual....how do you change the belt on it?
@my2centz196
@my2centz196 6 жыл бұрын
Are there any videos on how to give drill press more Power Tim Taylor style lol
@cousingary2035
@cousingary2035 11 жыл бұрын
Having a problem with my 1960's Delta drill press. it has a hand tightened chuck, yes no key is used. Now recently i used WD40 to clean the chuck, and to my disappointment i found that the teeth will not hold a bit once drilling a hole. what do you recommend i do to correct the situation.
@ianbeuttel3207
@ianbeuttel3207 10 жыл бұрын
I have a guardian 12 speed drill press, even though there a different company alot of that info does help me. But some of it does not just for that very same reason, its a different drill press from a different company
@heisenbergsempire4198
@heisenbergsempire4198 2 жыл бұрын
why does my drill press drill stay down? the handles are loose too? is this fixable or is it broken?
@kevinclancy.
@kevinclancy. 6 жыл бұрын
Thank you for this helpful video, I needed to learn all of these basics.
@gunsmokethedog6550
@gunsmokethedog6550 11 ай бұрын
My drill press suddenly stopped spinning. I hear the motor running, but the chuck isn't turning. Any idea what could be the issue?
@TommyFla
@TommyFla 12 жыл бұрын
When checking for runout, it doesn't matter if the table is square as long as the arm on the dial indicator is perpendicular to the spindle.
@RH-ms5ui
@RH-ms5ui 4 жыл бұрын
thank you for sharing the knowledge
@turningpoint6643
@turningpoint6643 8 жыл бұрын
Since you already have that magnetic base and the indicator I wouldn't bother checking how square the chuck is to the table using that square and the mark I eyeball method. Simply unscrew the single set screw that holds the vertical column to the magnetic base, unscrew that from the base, invert the column and clamp it in the chuck. Now zero your indicator on the table and slowly spin it by hand a full circle as close to the tables outer edge as you can get it. That's the proper and accepted way of tramming the table to the spindle. And it's far more accurate. Plus it doesn't matter how much runout your chuck has. That runout is exactly in the same position as the spindle rotates and the indicator tip makes the full circle. Think about it. And for anyone that thinks any of these light drill presses are at all rigid ? There not, while your tramming the table with the above method set the indicators plunger out on the table where it would be closest to the operator. Then just add a little bit of down pressure with your thumb. Then visualize what happens to that table under normal drilling pressures. Then think about the part weights you load onto the table. The table will flex downward severely simply because most are so poorly designed. I'm not really a woodworker and work mostly with metal. I no longer even own a drill press because of how weak and poorly designed the average non industrial models are that are less than 1,000 lbs. All my drilling now gets done on a milling machine. But if you want straight holes on a drill press, you'll need some type of adjustable support between the bottom of the drill presses table and either the floor or the bench top. It's physically impossible to drill a straight hole with any drill press like the one shown in this video.
@vishalramseook5810
@vishalramseook5810 8 жыл бұрын
m
@RodneyFisk
@RodneyFisk 11 жыл бұрын
What a fantastic video! Thank you!
@eng35ine
@eng35ine 12 жыл бұрын
How do u adjust Z axis?
@denisstlaurent4240
@denisstlaurent4240 6 жыл бұрын
Yap! I thought so to...guitarist! Great presentation!
@marathondude
@marathondude 7 жыл бұрын
very useful thanks. One needs to be careful about pointing the compressed air so that it is not aimed in the general direction of the eyes, so the face shield is actually a good idea at that point. Bad things can happen with compressed air pointed in the wrong direction.
@RoyBishopRocks
@RoyBishopRocks 11 жыл бұрын
When my drill press is unplugged, I grab the chuck and can move it back and forth about 3/4 of an inch. I hold the belt pulley above when doing this. When using my drill press I can hear a rattle until I begin to move the drill bit down. Is ther any adjustment for this. The drill press is a new King model.
@thefatfrog713
@thefatfrog713 6 жыл бұрын
This was a good video . Lots of useful information .
@IdontNeedHandles
@IdontNeedHandles 3 жыл бұрын
Great video, thank you!
@ScreamingEagleFTW
@ScreamingEagleFTW 6 жыл бұрын
why dont you put the dial indicator in the chuck to see if the table is square with the bit?
@e1000mile
@e1000mile 12 жыл бұрын
how can you tight the tension of the belt on a Radial drill press ?
@trevorcrane1664
@trevorcrane1664 8 жыл бұрын
Good video. Thanks Sandor.
@hifellow
@hifellow 9 жыл бұрын
Thanks for a great video! I learned a lot that I can apply to maintaining my drill press.
@pemtax557
@pemtax557 2 жыл бұрын
Very informative, I learned a lot. Thanks much ... Cheers, Dave
@scradduck
@scradduck 11 жыл бұрын
Great video, thank you for sharing your knowledge.
@SuperVaporman
@SuperVaporman 10 жыл бұрын
My drill press table is out on two axis, I noticed you only did the side to side, and skip the front to back axis. In my case I had to grind some of the mounting casing to get it perpendicular to the vertical plane. Keep that in mind when you get a cheap drill press like mine.
@darrenx5699
@darrenx5699 10 жыл бұрын
My table has a setscrew under the table bevel lock nut. When you tighten the screw, the front of the table raises.
@robertroth3515
@robertroth3515 5 жыл бұрын
Many small model drill presses save money by not giving you a way to level front to back. When you had it apart the thing to do is put in 1 or 2 "push" screws to allow for adjusting. The gringing is good but with much use it can wear out, hopefully it will stay square.
@ourenergyfuture
@ourenergyfuture 12 жыл бұрын
Very informative video. Learned a lot. Thanks for posting.
@gergeswilliam584
@gergeswilliam584 4 жыл бұрын
Very helpful Great video
@lumix086
@lumix086 3 жыл бұрын
Must be a guitar player 😁 great video, even 9 years later! Thanks !
@jasonperez3176
@jasonperez3176 3 жыл бұрын
Nice reading. Just like Holmes! People are often unaware how much information they unwittingly tell the world around them without saying a single word. Reading this information comes easily to people like you.
@MsJfraser
@MsJfraser 10 жыл бұрын
Good lesson and easy to follow. WD40 is actually a water dispersant, not meant to be used as a lubricant.
@burknstock
@burknstock 9 жыл бұрын
+Tom Wilcox No no it stuck a nut but you where soooo close!
@privatebubba8876
@privatebubba8876 6 жыл бұрын
He was using it as a cleaner, not a lubricate. He said add dry lube after wiping the WD-40 off. WD-40 is nothing more than kerosene.
@gregorythomashalsey4801
@gregorythomashalsey4801 10 жыл бұрын
Guys, my guess is that SN plays the mandolin or banjo, so the nails are essential for picking, so cool it.
@rm42749
@rm42749 10 жыл бұрын
Either that or he has a boyfriend!
@idiotradar1
@idiotradar1 3 жыл бұрын
@@rm42749 I'm sure only someone gay would notice that.
@akquicksilver
@akquicksilver 7 жыл бұрын
The .002" you mentioned looked like .005" to me.
@chaznsc
@chaznsc 12 жыл бұрын
What a great video, thank you for making it.
@lion39
@lion39 9 жыл бұрын
Great information!
@AnthonyMassey
@AnthonyMassey 12 жыл бұрын
Very well made video, covered just what I was looking for. Thank you very much.
@LordRocco777
@LordRocco777 2 жыл бұрын
Huge help thank you sir!
@ringbolt9
@ringbolt9 12 жыл бұрын
where can i find the webzine article
@FCADurgeshKumar
@FCADurgeshKumar 5 жыл бұрын
Thanks for uploading such informative video.
@facesmasher4216
@facesmasher4216 6 жыл бұрын
great informative video but i believe that the measurement with the square should be done before you do the run out check w/ the dial indicator to have more precise measurements on your adjustments overall in that way your measurements w/ the dial indicator wouldnt be misleading to time consuming unnecessary procedures thanks
@robertroth3515
@robertroth3515 5 жыл бұрын
Dial indicators don't care if your surface is plumb or square. They start from an absolute number. That is the reason for "zeroing" the turntable gauge.
@gfotinakes316
@gfotinakes316 9 жыл бұрын
Thanks, a nice job!
@ENGFREEMAN
@ENGFREEMAN 2 жыл бұрын
Many thanks, I think you cover it ... Regards
@benpress8884
@benpress8884 12 жыл бұрын
Wouldn't you want to square the table BEFORE you check the spindle for runout?
@YknotLearnall
@YknotLearnall 4 жыл бұрын
What you called a "set screw" on that Ryobi which yes many drill presses have, is actually a guide screw... it doesn't remove any play worth mentioning. It's only there as a guide and to prevent the shaft from turning. To remove play you'd have to drill 4 holes and use some type of set screw on two sides of the shaft 90 degrees to each other. Others have done it. Problem is, the switch is usually in the way so you can't...
@marshallborder9089
@marshallborder9089 6 жыл бұрын
Thanks great pictorial
@1969CampEvans
@1969CampEvans 7 жыл бұрын
Great Information Great Video Thank You!
@VENUEATHENS
@VENUEATHENS 5 жыл бұрын
Very informational, thank you!
@jjustinengineer
@jjustinengineer 4 жыл бұрын
Very informative!
@berthosquire
@berthosquire 8 жыл бұрын
Very useful. Thank you.
@hangugeohaksaeng
@hangugeohaksaeng 12 жыл бұрын
How often should this be done?
4 жыл бұрын
Have you done this even once since asking this question 7 years ago? Just curious
@allenmckinney9533
@allenmckinney9533 4 жыл бұрын
I'm watching all this care while my own drill press is on my porch in my little work area only protected my the roof over it. Lol
@JohnDavis-yz9nq
@JohnDavis-yz9nq 6 жыл бұрын
Nice video thanks
@bobbybaldeagle702
@bobbybaldeagle702 8 жыл бұрын
VERY HELPFUL!!!!!!! Thank you :)
@alandash685
@alandash685 11 жыл бұрын
Awesome vid - exactly what I was looking for! THX!
@delano62
@delano62 11 жыл бұрын
That tapered pin is called a Drift Punch.
@pikifrino
@pikifrino 8 жыл бұрын
Perfect, professional. Thxs
@MAGAMAN
@MAGAMAN 7 жыл бұрын
An HD video from 1970? Unpossible!
@elbenaso
@elbenaso 7 жыл бұрын
great vid!
@przybyla420
@przybyla420 5 жыл бұрын
Thanks sir!
@yossayutdarakamas
@yossayutdarakamas 8 жыл бұрын
thank you very much
@271828183141592654
@271828183141592654 11 жыл бұрын
Appreciate this.Thanks.
@ghostedyoutuber263
@ghostedyoutuber263 3 жыл бұрын
That is one sweet 70's feathered haircut.
@nofear5055
@nofear5055 12 жыл бұрын
This guy is like Bob Ross of Drill Presses
@5steve55
@5steve55 10 жыл бұрын
thank you
@vikitheviki
@vikitheviki 12 жыл бұрын
He's probably a guitarist, the use to have plectrums for nails :)
@oldsloane
@oldsloane 5 жыл бұрын
Every set screw I have ever seen has a shoulder so that it can't be over tightened and does not adjust side play.
@ctraugh2005
@ctraugh2005 11 жыл бұрын
Doesn't really matter because you can set the indicator level on its own, the base is only to hold it steady. Plus if the run out is too excessive you wont get an accurate level for your table and you will just be chasing your tail.
@thaidyed6219
@thaidyed6219 8 жыл бұрын
I don't see an issue with Sandor's finger nails but he needs to grow that hair out a bit more and hit the salon so he can get that bitchin' mane glowin' & flowin' in a classic Firebird.
@jpcory
@jpcory 12 жыл бұрын
Probally should square up the table BEFORE performing runout test.
@wiljon23
@wiljon23 9 жыл бұрын
Great video! Thanks so much. ...and I'm guessing the long nails are because Mr N is a guitarist.
@TL-ds8ux
@TL-ds8ux 8 жыл бұрын
+wiljon23 Or a pimp.
@beachbums2008
@beachbums2008 7 жыл бұрын
After checking the drill press Chuck take the indicater and put it in the drill press Chuck and sweep the table for square front and back,much better the using a square off of the drill press table
@smokyman9
@smokyman9 13 жыл бұрын
thanks alot you did well.
@reggiesmith6423
@reggiesmith6423 5 жыл бұрын
Just bought a new 13" drill press and although I put it together correctly, it will power and not spin. Any words of wisdom from anyone?
@peteryeung111
@peteryeung111 5 жыл бұрын
Did ya return it yet? Sorry, that was the only word of wisdom i have.
@benpress8884
@benpress8884 12 жыл бұрын
Don't know about nails getting caught in a machine, but it sure looks gnarly.
@GeofDumas
@GeofDumas 12 жыл бұрын
you can, but dial indicators aren't required to be perfectly perpendicular to provide a more than satisfactory reading in cases such as this
@tobyw9573
@tobyw9573 6 жыл бұрын
A drill press is a complex machine that only needs to have only another column, a lead screw, and a carriage/cross feed/compound/tailstock to make a lathe. You could improve the spindle if needed and add a lathe chuck.
@dougankrum3328
@dougankrum3328 8 жыл бұрын
...tap on that cast iron table with a 'soft' hammer....
@hutrawlson23
@hutrawlson23 10 жыл бұрын
my Maserati does 185
@SE45CX
@SE45CX 9 жыл бұрын
Hut Rawlson ... rpm
@BIGWIGGLE223
@BIGWIGGLE223 5 жыл бұрын
Excellent video. Bang on about the oil and the downside of excess oil. It kills me watching ppl drown stuff in oil. Might as well smear wet sand into your gears.
@ScreamingEagleFTW
@ScreamingEagleFTW 6 жыл бұрын
reminds me of Mr. Data from Startrek next generation.
Shop Shorts - Drill Press Chuck Runout and Replacement
14:19
Jared's Shop
Рет қаралды 121 М.
Drill Press Basics - WOOD
12:04
WOOD magazine
Рет қаралды 128 М.
Арыстанның айқасы, Тәуіржанның шайқасы!
25:51
QosLike / ҚосЛайк / Косылайық
Рет қаралды 700 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
World's Best Drill Press Upgrades
29:27
Marius Hornberger
Рет қаралды 1,7 МЛН
WARNING: Internet drill press trend can SERIOUSLY hurt you!
6:04
Stumpy Nubs (James Hamilton)
Рет қаралды 617 М.
Drill Press Repair: Tension Lever
8:53
Wood Tools Workshop
Рет қаралды 131 М.
Drill Press Tune Up and Maintenance
9:32
Jonathan Katz-Moses
Рет қаралды 88 М.
Drill spindle or drill chuck run out ?
12:36
enots engineering
Рет қаралды 182 М.
Safely Lock Down Your Drill Press in an Instant
18:35
Pask Makes
Рет қаралды 1 МЛН
Drill Press Machining Hacking/Tips and Tricks: The Basics
6:51
Eric Strebel
Рет қаралды 652 М.
10 Simple Drill Press Hacks  || Woodworking Ideas
16:53
YASUHIRO TV
Рет қаралды 1,1 МЛН
Tune Up Your Table Saw
7:33
WoodworkersJournal
Рет қаралды 193 М.
Watch This Before You Build a Woodworking Drill Press Table!
5:19