Tunnel Kiln Tutorial

[@ТеодорТотков-в4в]

Тhank you very much for the information. Extremely well and reasonably explained. Thanks and greetings from Bulgaria.

[@humbertocaicedo4510]

Le agradezco mucho su información quisiera que nos iciera una charla y demostraciones de un secadero túnel para ladilllos maciso gracias por la información contenida

[@kaverisri9784]

Very very thanks from india..

[@bambangyudha1397]

i think that explanation comes from Sanitary Firing Tunnel Kiln so it undergoes in Oxidation Fired but porcelain more differs from Sanitary Kiln

[@patrickdezo]

this is for Brick Mfg process

[@hashemvoshtani]

Thanks for your good information

[@sultananbar6750]

Hi.dear sir I appreciate your best lecture on the tunnel kiln. Please notify the position of blower and fans location in a 50 meter long tunnel kiln....thanks

[@akpd1]

POC are exhausted through the POC exhaust fan, rapid cool & cooling air are exhausted through the waste heat fan. When kiln is tuned/balanced properly you will have a zero balance area between end of fire zone and rapid cool. I've Been tuning balancing kilns for 25+years & this is the most accurate way of balancing kilns. Also use high velocity burners to achieve uniformity with staggered burners.

[@arputharaj9981]

can u send me your contact details

[@arputharaj9981]

please give your whatsapp or mobile number

[@arputharaj9981]

hi

[@arputharaj9981]

[phone] plz contact me or give your number

[@patrickdezo]

Paul Dorow - What you describe applies for kilns without exit door and which rely on kiln exhaust and waste heat recovery fans to supply air inside the tunnel, it does not apply to kilns with an exit door and forced air with exit end fan. I am sorry, but I explain practice that I applied in my professional life to modern firing kilns for the last 40 years with success. And what you call zero balance area, do you mean a zero flow area or a zero static pressure? Those are two different things.

[@shabbir8738]

sir nice to see this lecture on tunnel kiln.in rapid cooling zone the air direction should be to firing zone or it should be to cooling zone. thanks

[@phongthai202]

Can you give me the brochure about the tile kiln?

[@michelbisson6645]

That seem to be direct kiln but what about indirect where we cannot get oxygen in?

[@nateb5081]

👍🏻👍🏻 informative

[@narsisoni640]

Please let me know what is the cost of complete plant first

[@sanjaykumawatbijainagar1224]

Can I have your contact details, need guidance to build a 60 tons per day production brick kiln