TURBO Foxbody Fuel System Upgrade!! STORMTROOPER is CHUGGING!!

While we waited for parts to complete our TKX install, we threw upgrade Stormtrooper's fuel system by installing a Aeromotive Stealth 340lph fuel hanger assembly as well as their 30A wiring upgrade kit. As part of the upgrade, we also upgrade to stainless braided -6AN fuel lines and 60lb Deka fuel injectors. We made all of our lines which allowed us to design the system exactly how we wanted it. I am sure I could have used something better than zip-ties to secure the, to the body, but it definitely has been getting the job done. It was a fairly straight forward install, and the Aeromotive products we used are working great! I cannot wait to turn the boost up and see what this car can really do. Stay tuned!
Parts used:
Aeromotive Premium HD 30-AMP Fuel Pump Wiring Kit (Part # 16307)
Aeromotive '83-'97 EFI Mustang Stealth 340 & Hanger (Part # 18638)
Aeromotive Ford Fuel Pressure Regulator (Part # 13103)
Vibrant Performance Braided PTFE -6AN Hose (Part # 18426)
Vibrant Performance PTFE -6AN Hose Straight Fittings (Part # 28006)
Vibrant Performance PTFE -6AN Hose 90 Degree Fittings (Part # 29902)
Russell Fuel Rail Fitting Adapters (Part # 640863)
Russell Fuel Rail -6AN Line Adapter Fittings '86-'93 Mustang(Part # 640900)
#foxbodymustang #foxbody #foxbodynation #foxbodyfxreels #mmequipped #foxbodysonly #5ohsofinstagram #fordmustangs #explorepage #mustangfanclub #foxbody_daily #fyp #reels #instareels #musclecar #cartok #mustangfanclub #fastford #ford #foxbodyfx #foxbodyfxteam #badassmustangs #StangGang #cleanculture #mustangsofinstagram #mustang #foxbodyaddicts #foxbodyornobody #foxcastnation #50gang #mustanggalaxy

[@radionos8515]

Cant wait to see the new parts in action. Fuel system is on my list for sure.

[@eneboracingchannel]

Heck yea! We got a heck of a lot quicker since the T-5 came out, and we haven’t even added power!! Can’t wait to turn up the boost this season and see what a stock motor can do! We’re going for 10’s! 👍

[@509stallion]

Would you happen to have a list of all the fitting and lines you used for this install? I’ll be upgrading mine this spring and will be my first time. Thanks for any info!

[@eneboracingchannel]

I put most of the parts and part numbers in the description! The fittings may vary depending on your setup. I’ll try and update it if I see any parts missing. 👍

[@ilike9s]

Ok ?, most people I see do fuel line upgrades do -8 feed and -6 return. Any reason you did 6/6 over 8/6? TYIA again I'm jealous.

[@eneboracingchannel]

No particular reason. I see people go both ways and we had a lot of -6 fittings already, so it saved me some money. It wouldn’t be too difficult to upgrade to -8 if needed, but this will hold me over for some time. 👍

[@MrLucasgrossi]

How much hp is the stock fuel rails good for

[@eneboracingchannel]

They say with a turbo, you’ll split the block before running out of rail. Stock shit till it blows!

[@eneboracingchannel]

To be honest though, aftermarket rails would have made upgrading the fuel lines a little more simple.