BMW Turbo Inline-6 Engines Are Ridiculous | Explained Ep.4

For business [e-mail]
Follow the build here:
/ 337speed
/ 337speed

[@m4archangel]

Lol thats me on s55 race with my m4 e85 vs redeye. To add to your video I have put almost 38k race miles running only full e85 almost at 600whp and have over 100 races running at that power level. Only issues I have had in my last three years and 38k miles racing were spark plugs/ ignition coils / fuel injectors. I testify for s55 being one of the best engines in the world

[@PapiAndrey]

That wasn’t you on your most recent setup, was it? I think you would do a lot more damage now than you did back then

[@m4archangel]

@@PapiAndrey correct I have water / meth injection at the moment and makes the car 1-2 cars faster than from you see in the video

[@troypatillo1688]

I hadn’t seen that race yet. Looks like it was on Auto Glory? Damn you walked that hellcat.

[@m4archangel]

@@troypatillo1688 to compare how my car performs now watch the race on Auto Glory I have with a red rs3 two races with him. One no water/meth and other with water/meth injection

[@Btownsrb]

Do you have the crankhub fix on your s55

[@samholcombe3129]

LS guy in the comments section here, it’s insane what catless DPs, E85 and a couple more bolt ons does to these engines. They are already underrated from factory especially in the Supra Mk5, putting to the ground basically what they claim at the crank. I might be an LS guy but I can appreciate good engineering no matter the make.

[@Bocolatebip]

Obviously, but the initial buy in costs are miles apart

[@BabaYagaRacing]

Yupp

[@samholcombe3129]

@@Bocolatebip oh yeah, miles

[@lawrenceredden9049]

Very well said.

[@Jcastro9444]

I agree these new s58 engines are insane, ill give it like 3-4 years for price decrease then snag a g80 sedan

[@BMWQC]

I have worked with BMW for thirty five years, and I must say this was a very good presentation. Great job on this video!

[@presidential3228]

ik u worked overtime alot fixing 1000 bimmers a week

[@daniel635biturbo]

Then you might remember the m30, my modded 635 csi puts out 332kW or "450 to the wheels" on a mostly bone stock engine. Well apart from the Bi turbo kit I built. 😉

[@Colby_0-3_IRL_and_title_fights]

@@daniel635biturbo Why would he remember that?

[@TermlessHGW]

Claim that BMW is king of in-line 6 cylinder engines is quite funny since no one else is making petrol in-line sixes.

[@daniel635biturbo]

@@Colby_0-3_IRL_and_title_fights Do you remember the m30 ?

[@ReignRegime]

HOLY SHIT i watch your videos all the time and just realized that I made it here on your channel! im the first 335I with the gold wheels! That pull made 700WHP on the dot on full E with stock block. Held for a few years of pulls and racing and is now getting forged internals. thanks for the feature. Keep killing it!

[@joshuadqueen]

Loving the B58 in the 21 Supra. It's a beast and a beautiful exhaust tone.

[@TehNiCoLaS]

Mine sounds so good, once you start taking off all the noise restricting things it sounds so good

[@joshgts9675]

I'm not ashamed to admit I was a modern Supra hater; That was until I learned about the perfect engine, the inline-6, and how BMW is the one manufacture that's been perfecting the perfect engine. My ignorance has turned to respect. Can't wait to drive it one day.

[@devonsmith1995]

Dude you didn’t miss a single detail brother hats off to you. Everything you needed to know and nothing you didn’t. You didn’t earn my sub you stole it 😂 Nothing but love for you and things channel. Love this part of the car community

[@aurimasvenskus7921]

So daaaaamn true😅✊❤️

[@DuBstep115]

@@aurimasvenskus7921 Well he did miss the fact that B58 used 2 different type exhaust manifolds.

[@trololazore]

Missed the history of 1M & N54

[@Keithmata7]

yeah this guy is geeked up on every last video.

[@00.50goldeneye]

337 DPWH😭

[@a_rice_bowl3663]

Thank you for mentioning regular maintenance, people always bother me with my car since it’s a N54 bmw. But honestly, I just keep up preventive issues and I haven’t had a problem outside of a set of plugs. Have over 172k miles on it right now on a 2010

[@marked_one]

Yeah I was glad he mentioned it too. I've got an m240i with a b58 from 2018, I've owned the car since 3k miles and now it has over 54k. I beat the shit out of this car on country roads and even highway pulls up to 160mph and never had a problem with it. If you let the car warm up to operating temperature and keep on top of the regular maintenance like oil and filters etc the platform is truly amazing.

[@knowplay3258]

As a Euro Tech, hearing talk of preventive maintenance such as your comments and in the video....that brings a smile to my face and joy to my heart. Maintenance is the life of a vehicle. I wish more people realized this as you have. I tip my hat to you!

[@jakoreian]

@@marked_one what regular preventative maintenance would you suggest? Looking at getting one but the bmw name scares with with all the problems

[@riczon1056]

My 07 335i just passed 172k still running strong!

[@marked_one]

@@jakoreian Just regular oil/filter changes really and also the spark plugs every few years. Bmw recommend doing the oil change every 16k miles, but I'd say 8-10k is more reasonable if you plan on keeping the car long term. I've had mine for almost 60k miles now with 0 engine issues. Gearbox oil is another one that bmw says is "lifetime", however again, I'd say at least at 80k miles it migth be a good idea to change it. If you keep on top of the fluid changes and let the car warm up before you start revving it up, it should treat you well.

[@cfluff6716]

In-line 6 cylinders are awesome engines. My first was very positive experience with the Jeep(Chrysler) 4.0 and then mind boggled with a 2002 M3! The E46 was breathtaking practically a racing engine with the 6 throttle bodies and 8500 redline 🙌

[@Snappy650]

Agreed, more than 100hp per liter! The E46 is a masterpiece. bought another one for twice what my last one cost. Get ‘em while you can guys 👌

[@sheneedsyrruup]

@@Snappy650 E46/E39 is my favorite BMW era

[@AlexAlcyone]

love my E46 and its the only car that's worth more now than I paid for it!

[@stephenmaxwellfuks3484]

Having now owned an n54, it can make about 600 whp reliably as pistons can fail as low as 650, however than can make 700 reliably if you modify it very well (and if you have one of the stronger 07 or is motors) however maintenance on these is very costly and it is costing me a great deal right now. The only problem with these motors is that it takes a lot more money than you think to make the power and make them reliable

[@ravszee]

Still cheaper than buying a g8x m3/4. N54 to the moon!

[@BimmerMafia]

Do you do your own maintenance and mods??

[@JustAirizz]

@@BimmerMafia Ive done some of my own maintenance and most of my mods… FBO is fairly easy to do on your own, even if you don't have a garage. But I'm saving for that jump to ST, I'm having fun with the twins over the past year just due to finally being FBO, and going stage two. I've now been owning the car now over four years, and don't have any plans of selling it. She either blows up on me, or the wheels fall off haha.

[@frankkdelacruz8536]

@@ravszee n54 can’t beat no s58 or s55 unless ur running atleast 100hp more

[@BimmerMafia]

@@frankkdelacruz8536 more then stock. Or an s58.

[@dinero8331]

N55 m2 owner here, there are 4 variables of the n55 and the later n55s have the ewg from pwg and the m235i has a forged crank. Alpina has a twin turbo n55 variant also. The m2 n55 has the s55 baffled pan, lsd, runs s55 dme control, forged rods & crank, custom cylinder walls & s55 pistons. Ewg N55/s55 can run m5 injectors and are making 700+ whp on direct injection only today.

[@ChrisEOfficial]

So you are running 700hp only through M5 injectors? 500hp for Stage 3 is more realistic.

[@dinero8331]

@@ChrisEOfficial dorch has made a stage 3 hpfp setup for the flow so with that paired with m5 eu5 injectors you can reach the fuel flow needed to support 700hp without port injection needed. The size and design is the same but the spray pattern/ flow is alot more on the eu5's. also nostrum has stage 1& 2 injectors for s55/n55

[@Almansa403s]

M135i n55 was also forged crank/rods

[@redarmy1778]

@N P how’s reliability with gaskets? im on 92k with my ewg m135i stock but still pulls like it just came out the factory, had all gaskets replaced at 70-80k and vanos fixed all under warranty, about to part x on a 2019 m140i but i fucking love my m135i

[@marcosrmzzz]

Been thinking about a m235i and 335i f30. Arn’t they the same platform or do they have performance difference besides the bump in hp from factory tune ?

[@d0pestar]

As a BMW fanboy please do more videos on BMWs lol. Love all your content one of the best car channels on youtube. No gimmicky bullshit just clear and concise information. Keep on rocking man.

[@MKRN98]

Owning N54 with two-three bolt on parts and simple Stage 1+ tune from MHD I can't say a bad thing about this car. I'm surprised it's that reliable after hearing all these horror stories. Yeah, it has these expensive injectors, water pump, HPFP but not gonna lie, FCP Euro got you covered. In case of injectors though, you don't need to replace them. Yeah, I know that's shocking but all you need to do most of the time is clean injector tips and replace teflon seals, that's all. I have plans to chase the power but I'm not sure if I really need it. 390hp that MHD claims (never dyno'ed, idk if it's true) is enough for me and I don't know if making car less reliable is worth doing all these mods. Let's be real, on daily commute, where the hell am I suppose to race? Or who? Big energy Altimas? 😂

[@joshuadqueen]

Pay to play, baby. We all know it's a pricey hobby, sure some cars cost more, but I ain't ever heard of a cheap project

[@kekmeister4627]

You should check out the new MHD+ tune came out 3-4 days ago , it has more new feature and update and the best of all ANTI-LAG.

[@joshuadqueen]

I race myself cause it feels good and sounds good, haha. I do it for me and the shows, not necessarily to race. Still fun making the car into a beast even if it's not justified by time played.

[@saganworshipper6062]

Bro, don't ever race an Altima. Don't even park next to one. Those mfers will take you out! Is there even a single Altima out there without dented doors and severe whiskey rash up and down both sides of the car? Should be banned off the roads. Fuck those ppl!

[@riczon1056]

Only reason why I keep my 07 335i is all parts are mostly from FCP 😆

[@thmanx]

Thank you again for for doing such a great break down of specifics in engine evolution. Be it JDM, USDM or EDM. You folks got vids and details on point. And we all love it. Keep it up folks! (Maybe start doing the diesels next, be it sedans, 2500 trucks, EcoD 3L, etc. Us weekend engineers love it, let’s gooooo!

[@jpmavichana]

B58 on my 21 Supra is a gem. Smooth, lots of usuable torque and efficient. Great video!

[@TehNiCoLaS]

Sounds great too! Shout out MHD

[@sbeezynukka]

I’ve been a b58 owner for 3 weeks and I’m in love with the platform! Still scared of it but can’t wait till it’s power mod time

[@michaelmesolellaesq]

Don’t be … extremely versatile engine and loves to be hammered. Put 50k on mine and it loves to sing. Only thing that pissed me off after a while we’re the programmed lift off chirps, other than that, which aren’t necessarily that bad, it’s great. Best engine not sure if I like my s58 better. Still figuring it out. Tuned it’s incredible, stock they both have their ups and downs. S58 upper range and power is not comparable and thats when the ‘M’ really stands out. However, for every day driving, the b58 is perfectly tuned and smooth and delivers power better lower, but I constantly had to put coolant in. Perhaps they fixed that. 2018 m40i and now x3mc - have fun!

[@logansam4763]

@@michaelmesolellaesq I got 17 plate 140i stage 2 about 470bhp never had coolant issues

[@michaelmesolellaesq]

@@logansam4763 My x3 b58 m40i called for coolant nearly all the time after about 15k miles - thankfully never amounted to any issue. Just topping off.

[@sbeezynukka]

@@michaelmesolellaesq she’s been a top! She’s MHD Stg 1 and XHP Stg3! Very fun! Now I just need that M XDRIVE tcase/diff so I can turn the fronts off and on on demand

[@sbeezynukka]

@@michaelmesolellaesq did your issue end up being a bad coolant bottle? I’m waiting on mine to start losing coolant so I can get the updated coolant bottle.

[@shifty1927]

My pops had the first 1000whp m52 in 2005. We always joked that bmw engineers were lurking around the bimmerforums forced induction boards cause of the turbo cars that came out shortly after.

[@GODEYE270115]

Toyota saw potential in the b58 and that says it all There was a comparison drag race between an mustang Mach 1 auto vs MKV Supra 3.0 vs Nissan Z auto. The Z came in dead last and the mustang and Supra tied, b58 swings above its weight class and its already beating its direct competition

[@joshreynolds729]

Above it’s class? All of those cars are equally expensive. I watched the video and the mustang won by half car being na then the Supra turbo then the z also turbo both are lighter On forced induction and still lost to a na mustang Mach 1 which is just a track GT 🤣. Now is it probably the king of all inline 6 motor yep sure is but I’m not a fan of aluminum blocks either. It is impressive but would be nothing without a lot of boost and light weight saving. I prefer to make big power without having to even change my power adder or internals, weight saving can be had later. Boosted motors are not reliable and the more power you push through it the less it becomes. Also bmw has many electrical problems but the design is strong being an inline motor due to balance but only matters if the internals can handle it because the design flaw is torsion having 6 inline subject to snapping cranks and doing block damage but needs boost available to which it does not stock therefore it incomplete and might as well get the 2 extra cylinders if I’m going to build anyways for 1000 plus hp something these cars can’t do unless built on a lot of boost. Mustangs don’t need to be built to make good power and they actually sound good however still aluminum block. Now for a street car daily that you can make relatively fast sure. Not my top choice but everybody seems to think it’s the fastest platform out because they watch babyaga 🤣.

[@GODEYE270115]

@@joshreynolds729 dude drink some haterade, cause I’m not reading all of that I’m not sure why you’re so heated lol

[@stefanomarcellino6701]

I agree on the b58 comment but that video was bullshit look at the z’s tires. Regardless i like the b58 better also but i wouldn’t rely on that video for evidence 😂

[@joshreynolds729]

@@GODEYE270115 no hate man. My bad if I came across like that guess I didn’t have my coffee 😂 sorry about that. Anyways I like the b58 it’s the best best i6 on the market. Was just pointing out some flaws that’s all, no hard feelings.

[@Supremxcyxi]

@@joshreynolds729 throw a $500 MHD tune & catless downpipe on that Supra and you’re gonna put 5-6 car lengths on that Stang

[@abelucious]

I've had a tuned N54 for almost 3 years now with aftermarket turbos, after the initial maintenance work I did (changed everything) it's been reliable for me at a little over 500 whp, only first set of aftermarket turbos failed but I put enough high boost miles on them,

[@bullet2monkey]

Exact same here, aftermarket turbos for just over 2 years and after the initial wave of maintenance it's been dead nuts reliable.

[@spudbot69]

High boost miles. Sounds like an excuse.

[@bella_testastretta]

reliable turbo fail lol

[@k0zzu21]

Well that's not reliable at all. I haven't had to change anything sans fluids in two years in my car.

[@Wolfishhippo1]

my new favorite channel! such awesome info, great footage, and easily digestible for those of us who understand all this stuff and are gear heads at heart but haven't done much wrench turning like myself. super fun!

[@4x4runr]

N54 with over 118k miles and over 700awhp on a stock motor. Right now only issue I’m having in the car since the tune are my wheel bearings. You’re spot on with N54 on how it’s older and a more rigorous maintenance schedule. However, since I did the maintenance over mods, I really haven’t had any issues. Tranny and transfer case might go first lol. Nice video. You got a new subscriber

[@raywright998]

I think wheel bes are a pain. And I know I'm about to deal with one rear wheel hub bearing aughhhhhh

[@ThatGuyTez]

Faxxxx

[@DLaVey]

How much power can you get on 93 OCT?

[@1v1qsns]

Your vids are great dude!! Keep it up! Love the bmw content btw

[@randallboone9375]

LOVE my 2011 335i. Ppl give the N55 shit but don’t let that fool you. I’m pushing 390 to the rear wheels and that is more than enough to have plenty of fun. Thinking of upgrading to a M or B58 car eventually though.

[@saka3364]

People always claim how much power they got but when they go the the track can’t even control those cars

[@pepsiontherockspls]

Saaame 2011 335i. I put about $6k into this car for maintenance and FBO, stage 2 mhd... It's night and day how fun it is. AWD is the shit as well. Soo glad I bought it when I did a few years back.

[@jbrown7403]

Great video and super detailed! I absolutely love my S55 in my F82! So versatile …… a great daily driver and a monster with a push of a button! 🏁

[@saganworshipper6062]

You bought the right car dude.

[@flowmastaflam]

had a bolt on/tuned 2008 n54 and now i have a stock s55. they basically feel like the same motor. goes to show how well they built the n54 all those years ago. was funny gapping M3's because when the 335i came out nobody knew it had twin turbo's and could boost power by 50% for 2 grand.

[@yrasphong]

BMW so under rated..their new engines are insanely powerful,easy to work on and reliable unlike the older generation BMWs..they have come a long way..btw everything u speak is truth and knowledge..I subscribed to ur channel..I appreciate so much ur knowledge of all the cars engines..gr8 job bro

[@nerdeater27]

I don't think it's underrated. It's just that for a lot of us car guys, we either don't have the money to buy a newish BMW with less mileage and a warranty, or the money to maintain a high mileage BMW. It's just better horsepower per dollar to go with an LS or coyote, both of which would be more reliable at higher mileage than the BMW. But we can't deny that, if done properly, a modded BMW turbo inline 6 is a force to be reckoned with.

[@chrisperry2922]

@@nerdeater27 I have to chime in and agree with your reply but I definitely disagree with the one who you replied to about being reliable because the fact is that it just isn't. Old BMWs are definitely robust vs later BMWs

[@J.Gainez]

@@chrisperry2922 yeahh idk wtf he was talking about, new bmw engines reliable? more than the older ones?? i almost feel like he’s trolling lol

[@chrisperry2922]

@@J.Gainez exactly lol! I expect BMW fan boys will surely have nothing but great comments to say on a video like this one but I used to tow for a living and BMWs were one of the cars I've towed the most aside from Range rover and Jeeps specifically the Jeep Wranglers

[@harolddiaz9095]

The M54/M52 are great engines too

[@xxvjvxx]

main issues with n54/52 cars is the plastics; end tanks,hose ends etc. however i do own a n52 325i and it currently has 253k mi on it. if you do the maintenance and take care of it they last for friggin ever. the BMW i6 engine is a tank in general but people beat on them and then don't take care of it so they get a bad wrap.

[@HaydensJourney]

Perfect, plastic is cheap. And easy to work with

[@gallardo20000]

@@HaydensJourney why would you want to replace junk parts regularly lol more fun to actually drive a working car than constantly worry and chase parts down..

[@Engineerboy100]

Good job. The S58 in my wife's X3M-C blew my mind. The engine is absolutely amazing!!!!

[@malinoisnation9392]

N54 e60 2010 owner here. Stage 2+. This thing rips. Absolutely best decision I’ve made. Almost got it totally sorted out. It’s like new.

[@ElRayDelRio]

I love my 2008 E61 Lci with N54 but my god, the B58 is a sleeper cell! Such a wonderfully put together engine. But still, after almost 15yrs and just over 100k on the chasis and the estate is still a blast to drive and its design is still so timeless 😎

[@billymania11]

You didn't cover the M2 spec N55, but to be fair it is pretty rare. It's pretty decent and runs higher boost but does have significant turbo-lag compared to the regular N55 engine. Overall the BMW turbo 6 is one of the best engines currently available.

[@ChrisEOfficial]

Correct, it runs a custom crankshaft and bearing shells, pistons, spark plugs from the S55. The tuning potential is pretty limited in comparison to the S55 (which only needs software to run 550hp on stock parts) but still I prefer it because of more fun, better sound and mid-range torque instead of high end.

[@grovsey3656]

n55 sucks.

[@zorn3226]

Actually incorrect, the m235 and m2 share the same n55 engine, ALL n55s post 2014 have a forged cranked and the s55 rods, simple to check realoem to confirm part numbers The m2 runs the exact same turbo as the EWG n55s as well

[@grovsey3656]

@@zorn3226 it still has other differences. It had a dry sump for 1.

[@joshyjoshy2022]

The s58 engine is so dam good on the x4m comp. Great response, great power punch etc...

[@endroo93]

Here in Eastern Europe what we call German 2JZ's are the OM606 and the M57D30. Don't worry, we know that they're old diesels but look at the torque dude..! Spot on vid, dude!

[@rhyelince8277]

Please cover the AMC 2.5/4.0! I know they're not powerhouses but their insane reliability is something to talk about

[@vapeurdepisse]

Love my 2014 335i, bought it brand new, picked it up in Munich at the factory! Still going STRONG, no problems ever. Proudly all stock, I love the stock N55 longevity.

[@wiz987]

BMW always been the king of straight sixes, you Americans been sleeping, they were making straight sixes for their fighter planes during WW2 and then started putting them in their cars in the 1950s

[@olusphone]

Yawn...

[@madkas14]

Toyota Inline 6 has entered the chat. Lol

[@bapr3887]

First European brand who started putting inline sixes into cars were Audi.

[@olusphone]

@@fallschirmjager0000 I'm sorry but I'm not American 😉

[@madkas14]

@@fallschirmjager0000 Taking turns does not determine how a good an engine is.....

[@KiesMotorsports]

Appreciate you putting us in 👍🏼

[@ioijiopjkiopjkp]

Should have gone a few years back to M50/S50 engines. You can go from 190hp to 500whp with just bolt ons and I would argue they are way more reliable than the modern engines.

[@droman608]

Those were the 2JZ N/A German engines.

[@SuzGSXR]

Love my 2013 e93 335is with the DCT. N54 is a monster

[@e46m54nissansr20937]

These B48s 4 cylinder based off the B58 are nasty as well. Friend of mine got gapped in his 392 pretty bad by the new M135i. Theyre ugly but quick.

[@IRaoulDuke]

Lol true , if we could just get BMW engines in Audi designed cars 😜

[@DesertStateNevada]

These types of small engines with high power always come with a compromise, in this case reliability. Ask any real car mechanic (NOT top gear uk style propaganda shows), and they'll tell you exactly how much german engineering is worth. Any small german engine that comes even close to a 392, wont be half as reliable as the V8.

[@codylujan]

I have a G20 and I was absolutely floored by the stock power and torque on those things first time I stomped it 😭. I've never felt a 4 cyl pull like that. If paired with a tune, it'd be hilarious to see what it's capable of.

[@codylujan]

@Faggot Rotten Interesting. I've heard a rumor that some dealerships fill up these cars with 87 octane and cause them to drive extremely poorly while on test drives. I was pretty impressed with its power curve and I use to own an F82 so i'm use to great power.

[@papa_pt]

stock for stock (no driver mods either) there's zero chance the m135 beats a 392.

[@michaelweigel2466]

The B58 in my M140i is after some updates good for 418 HP. Especially in combination with the hand shifter and rear wheel drive the perfect combination for fun. If you like you don't have to shift. Nearly all driving situations you can handle in the 6th gear.

[@patrik4292]

Don't want to see your clutch in 10k km

[@evil-toaster8522]

@@patrik4292 You can replace the normal clutch with the one from the 550i. Very common replacement and will allow a lot more torque.

[@pw5315]

Oh man, your poor tranny/clutch! Gonna be replacing clutch every 15k LOL

[@goonytunes4119]

Dude what

[@goonytunes4119]

Bog master

[@dalar2]

I love the production quality of this video, well done!

[@User37621]

Awesome video editing and content. Thanks!

[@musselicious]

We need more videos in this Explained series 🙂👍🏻 Keep up the good work

[@boostlee876]

This is a good summary but you would have really stood out from other engine reviewers if you mentioned the N55 from the MPerformance line. The N55 in the M235i comes with forged rods and crankshaft. The same rods and crank that later went into the M2’s N55 and the M3/M4 S55 motor. The forged internal N55 is the real power successor to the N54 as they’re pushed over 700whp stock block.

[@logansam4763]

235i are slow compared to the b58s in the 140 . 240i

[@boostlee876]

@@logansam4763 and what does that have to do with anything?

[@logansam4763]

@@boostlee876 means u should sell that trash get a b58 bro

[@4our6ixkwvmz]

Glad someone pointed this out as I wad going to. People really underrate the MP line of N55

[@boostlee876]

@@4our6ixkwvmz Definitely. Forged internal N55’s are kinda on the rare side. Most people don’t know it even exists because most of their experience with the N55 is from a the standard F chassis 335i or 435i etc.

[@02Franxx]

I have a 2011 535i and it has over 183k on it and the only issues were AC went out a year ago, the factory water pump failed at 174k and its starting to have an oil leak at the valve cover, for 12years thats pretty good,

[@M3dicayne]

Just want to throw in that BMW's Diesel engines are also awesome. Got the N57D30S1 in my X5 M50d. By the time it was released, it was the most powerful diesel engine in mass production. Again, six cylinders, 381hp and 740Nm of torque.

[@altandruin]

Fully agree! I once owned a 4-series with biturbo N57 (750Nm with little mods) and between traffic lights it easily outran M4s.

[@SheekTresSesenta]

Awesome video as always! Would love to see your take on modern 4 cylinders. Especially the EA888.3

[@swype.media-9309]

Yes! Ea888

[@PapiAndrey]

Yes! It’s like the 4 cylinder version of BMW’s inline 6. I know the N20/N26 and B46/B48 are great, but they aren’t on the same level. Those EA113’s and Gen 1 EA888’s sound downright nasty for a 4 cylinder. Reminds me of how the N55 sounds a little. How it just sounds raw and guttural

[@DNO_Fitness]

I have a 2015 Audi A3 (DSG 2.0T). These little cars are pretty quick with a tune, downpipe, HPFP, and ethanol. The little factory is20 turbo can do mid 11's. Hybrid turbo's (with decent spool for daily driving) are running low 10's. Low mileage excellent condition A3's and GTI's can be found around 20k. Add in around 10k and you've got a reliable 10 or 11 second daily driver. Not bad.

[@player1GR]

b48

[@aguyfromgermany5202]

@@DNO_Fitness oil consumption higher than fuel consumption xD

[@emmanueloryang7988]

Actually the first time a turbo charged engine was inside a M car was in 2011. The BMW 1M, the 1M was the first turbocharged M car , it came with the n54 pushing about 340 hp. It's actually the most powerful n54 in stock form from factory. And it had a few differences from the n54s in the 335s, 135s, like it came with 2 oil coolers. It only came in manual and all the suspension parts including the brakes were taken from the e92 m3. Also the turbos on the BMW 1M n54 are slightly bigger than the other n54s. And it was limited to about 6000 units world wide. S55 was the 2nd turbocharged M engine

[@noahman9802]

No, E70 X5M/E71X6M in 2009 with the twin turbocharged S63.

[@Supremxcyxi]

The 1M isn’t a real M. It’s a 135i with wider fenders & M Performance parts. The E70 X5M was the first turbocharged M car with the S63.

[@DroneStrike1776]

@@Supremxcyxi It's a Frankenstein build, which makes it cool.

[@justjosh11]

Really interesting video. Thanks, I enjoyed watching and definitely learnt a thing or two

[@noelalam9731]

good content brotha. thank you for putting everybody on

[@colinw7205]

Also Toyota engineers had massive input in developing reliability into the B58 during the joint developmental phase of the joint Z4/Supra platform. Like "increase the mm of this thread screw here and increase the the capacity of this component there". Yes I read is was that granular. I call the B58 a "Toyotasized" BMW engine. When a friend of mine wanted to upgrade his Z4 to the new platform I said go for it b/c the Toyota influence and input made it more than worth it with possible less visits to the stealerships for warranty work.

[@tylermacmorris1361]

The B58 had already been designed before the colab lol. Toyota did make changes for the supra though.

[@tylermacmorris1361]

I get what you're saying now lol, sorry.

[@papa_pt]

where'd you dig up info on what they actually changed due to Toyota's input? I can't find anything

[@tylermacmorris1361]

@@papa_pt you really have to do some digging, but they really didn't do much. It was things like water pump and fueling. Most of the information is hear say and hardly reliable.

[@baldisaerodynamic9692]

N55 has proven to be a reliable setup all around over the years, the N54 is a solid MOTOR...everything attached to it is garbage. B58 im not familiar with, but from what ive been seeing its not problematic. the N55 is great for someone that wants to play, but stay reliable....N54 is for people with bottomless wallets and want to play hardcore with power.

[@Bmwguy2011]

Totally true. The stories are common of blown turbos, high pressure fuel pumps, and??? Costing $7-8000 to fix.

[@TheFanatic340]

The b58 is better than the n55 in every way. And as such will walk the n54 community as well. Even in high power

[@idokwatcher2062]

B58 is burning oil like it's petrol. Many Supras returned as lemons. Don't fall for the myth being created of "reliable Toyota engineered B58". It's another BMW money pit with engineering flaws.

[@dionisifilpo7735]

my 640 n55 never gave me an issue two years now.

[@Bihinchi05]

n55 is garbage

[@somtoth]

I’ve never subbed to a channel after watching 1 video….hats off to you brother this was triple A content

[@kekethetoad]

Blown away by your content dude. Keep it up!

[@Mr.G777]

Hey brother, I really enjoy your series on engines and vehicles and all the other shenanigans! I was wondering if you would do a video on the BMW m57 engine and mainly the e90 335d here in the states, I'm astonished at how little attention and content there is on them as they make an easy 500+ tq at the wheels and 50 mpg with a piggyback tuner, stock out of the box! The platform has been around for sometime and still evolves and I think it would be excellent video of this quality and enlightenment!

[@stoyantenev7819]

most versions of that engine are a beast when it comes to upgrades, all you need is a bigger VG turbo and a dude with a laptop that knows his thing, to make some easy HP and NM xD I am driving an e39 with the smallest M57, the D25 with a turbo (direct bolt-on) from an e60 m57d30tu (218) and a remap, it hits the fuel limit at around 230 bhp at the wheels, but this isnt what is insane about it, the insane is that it hits a little over 600nm, for some reason that thing PULLS like a train! Couple of months ago i had to give a tug to a friend of mine with his 190e (yes, i pulled a merc on a rope :D ) which wouldnt start and at 1 moment i received a call from the guy (i had forgoten i have a car on my tow hook) "dude, slow down, we gonna get killed" - the bro was terrified as it was *not us doing a 160km/h while pulling the car by a rope* by the way the car gives an economy around the 50 mpg when driven calmly :)

[@dustin_live]

Brah wtf

[@davidroeder7299]

My dad had a N54 335xi when I was around 17 which I was lucky enough to borrow several times... Such good midrange, but yes they lacked top end for sure.

[@HaydensJourney]

Until you up the boost on your phone at a stoplight 😂

[@Motosmostwanted]

Great video! Only specs missing were the m235i and m2 variant n55’s which have forged bottom ends, m235i only has forged crank and rods.

[@Almansa403s]

Also m135i :)

[@jasonh728]

Great video man thanks. I have the N55 135i running 400 bhp 400 ft-lbs of torque absolutely great cars and engines.

[@ACommenterOnYouTube]

6:30 Most if not ALL turbo engines from the factory will gain LOTS of hp with just bolt-ons alone and no tune. Just let those turbo's BREATHE freely 👍🏾

[@callanotis7902]

Gotta let em breathe #1 rule😂 I say the same shit

[@ACommenterOnYouTube]

@@callanotis7902 it works the same for na motors but even allowing them to breathe better doesn't really help unless you tune them with better fuel, even with that it wont gain much. But when it comes to turbo, its a whole different story. Also allowing the crankcase to properly vent out will allow that rotating assembly to spin easier ..

[@DuBstep115]

@@ACommenterOnKZbin Biggest hp jump with I have ever seen comes from e60 535d, from factory it makes 282hp and with DPF delete + Tune it can make 430hp

[@larsjrgensen5975]

@@DuBstep115 That is because it is held back by emissions, ignoring the emissions makes a huge difference.

[@DuBstep115]

@@larsjrgensen5975 True with they still make like 360-370 with dpf on

[@Scotford_Maconochie]

I have the N55 on my 2017 X5 and despite it being stock with exception of an upgraded charge pipe, M Performance exhaust and M Performance that bumps up HP and torque above stock levels. It has a lot of power for what I want. Under my ownership I had zero issues other than replacing the thermostat, spark plugs every 25k mi, oil changes every 5-6k mi etc. Dec 2022: my water pump failed after having gradually failing for almost 2 years. It became shorted out and was runnning non stop while car was asleep. Not even 3 shops incl a dealership found the cause. I diagnosed it myself.

[@alisakran7063]

Agree. I have a N55 435i Coupe and the thing just brings a smile to my face every time.

[@MrGravloc]

I thought modern plugs REALLY did last much longer ? How much does it cost to do the plugs, do you do it , need special tools or by BMW or independent import garage ? I am terrified of used German cars watching friends get whacked with them . I want to believe they are not a bad bet as a value prop as used car if you want to drive rich on a middle class budget but i both see in real life and certainly hear on social that its a risky proposition . I have a friend who finally covered and garaged his BEAUTIFUL low mileage V-10 M-5 he got for 20 something after dropping another 20K on stuff , then a year later did all brakes /tires and a few other small things for 10k and thinking he was good for another 50K and something else failed , he wont talk about after he was always on about his V-10 M-5 . He has like 4-5 BMW and Ducatti motorcyles and likes ' Nice Stuff" and has some money but dont ask him about that Cherry M-5 if you want him in a good mood. Its a pretty cool rocket couch when it runs but not worth the 50-60K he has into it now considering its sidelined .

[@alisakran7063]

@@MrGravloc You need to have deep pockets, know how to work on them yourself or have a good trusty independent mechanic. Especially for the M models. Besides that, it's like any other high-performance car. If they were easy to maintain and own, everyone would own them and they would not be that special. You can't just buy one and treat it like a Mustang.

[@Scotford_Maconochie]

@@MrGravloc on a turbo engine your spark plugs won't last as long if you want to maintain your car performance. I do mine every 30-35k mi. Beyond 60k mi also smart looking into replacing the coils as preventive maintenance. For the N55 go either for NGK Iridium or Bosch Double Platinum.

[@MrGravloc]

@@Scotford_Maconochie Thanks for your time/ expertise .

[@Tain950]

BMW is absolutely killing it with their inline 6 engines. Their newer inline engines are so much more reliable than the older engines as well.

[@carcrazyguysa4059]

Regardless of the beef that B58 vs N55 vs N54 vs M engine owners have all I have to say is that I love BMW inline 6's the most wonderful engines ever created! I have an N55 135i and I love it to death!

[@channex8179]

Even the Diesel I6 engines are insanely strong especially the M57 which can make 700bhp+ on stock internals.

[@sjoroverpirat]

No diesel can make more than 200hp/l

[@337speed]

Billet 5.9 Cummins with 2500HP wants to have a word with you😮‍💨

[@sjoroverpirat]

@@337speed yeah sure, tractor pulling, drag racing or marinen engines can pull that kind of power. But reliable in a road car that will be abused? Nope.

[@channex8179]

@@sjoroverpirat Research M57 engine and tell me that! Their legendary engines, I take it your a gasoline guzzling American where diesels are mainly considered as engines for agricultural and construction machinery.

[@sjoroverpirat]

@@channex8179 I've had a 535d and a 335d, I'm a marine engineer and have worked around 10 years with diesel engines. So I guess the answer is no.

[@AquaStevae]

They are all very good engines, for sure. But I'll stick with my 740whp N54. I do regular maintenance which isn't expensive or bad to do, and this engine has never given me any problems. Great engine if you keep it maintained, and can be extremely reliable. The lack of reliability is USUALLY driver error. But they never admit to it, and blame the engine or car instead. I've owned six Bimmers and NEVER been left on the side of the road. Take care of your car, and your car will take care of you...

[@gayalien88]

how much is mileage with that tuned bmw?

[@R03333]

Maintenance I'm here for but some of these older 6 cylinder BMW guys are like "it's a reliable 700hp" but go through plugs, coils or fuel pumps every other fill up it seems😅

[@aleschenfelder3559]

Great video I loved all the details I have an e92 n55 With a little done to it and love the car.

[@AZ0986688]

The first I had was a m535i..loved it(87model)No turbo on it!:)

[@alisakran7063]

I've had several BMWs and work on them. I now have my realistic goal car; a 435i N55 Coupe. Every time I drive it, I get the biggest smile on my face.

[@kodiak7964]

Have you ever had a bmw v8?

[@alisakran7063]

@@kodiak7964 Yes. I had a M62 740i E38 Sport.

[@kodiak7964]

@@alisakran7063 did you enjoy it?

[@codylujan]

I had an f82 M4 with the S55. The stock intercooler leaked all over my cylinders for like a month straight. When it finally put it into limp mode, I changed the stock intercooler to a metal one myself and it's ran like brand new. Granted, it could've seized the motor and blown it up, but that's literally my point. How that engine ran that smooth after that is beyond me. I ran lucas fuel treatment through it to keep the cylinders clean and lubricated, I put a low amount of octane booster per fill up to ensure I was always running 93-94 octane and I put CRC cylinder and engine cleaner through it twice in 15k miles and it purred like a kitten. Take care of your vehicles and they will last.

[@cazantrabant519]

Next week I ll finally take the me f80, I hope the power and torque are felling brutal

[@johnnylima784]

That’s strange as the s55 doesn’t have a intercooler, but a charge cooler. That’s probably what you meant. Glad you got it sorted. Have had my f80 m3 for 4 years and it’s a never skipped a beat really, and I’m still loving it. Brilliant cars, great engine, fantastic handling. Excellent all-rounder!

[@SolarMotorsport]

Same thing happened to me in my F82..put in a VRSF top mount intercooler and good as new

[@maximusEagle]

Hi the Fuel cleaner...Can that be put anytime or just before u do the oil change...?Or its not related ?

[@codylujan]

@@maximusEagle I usually put lucas in every 2nd fill up

[@davidperry4013]

This is why turbo 6 cylinder engine or converting natural aspirated 6 cylinder into a turbo or twin turbo setup has the potential to be V8 killers. If you swap the the 2 factory turbos in a N54 with aftermarket low inertia turbochargers such as 2 Garrett GBC 20-300 turbos, you can make 600 hp with very little turbo lag.

[@ivangutierrez738]

Might have the potential till the v8 gets put on some turbos.

[@3meansgo]

Love the video, super informative 💪💯

[@sRxcss]

Went from N54 to B58 and this thing has power like a 991 turbo yet a fuel consumtion when communting to work of a golf. Insane

[@DWatso]

Many years ago, here in the UK, I worked for a well known tuner of the Nissan Skyline, RB's back in those days. We bought two RB26 engines, formerly owned by BMW Research. That told me the whole story.

[@commontopg3320]

Are u trying to say bmw copied from the RB design

[@DWatso]

@@commontopg3320 I'm saying we bought two motors that were known to have come from BMW R&D, long engines, no ancillaries, we had the heads off (to fit steel gaskets if I recall) and the bores were still factory cross-hatched, so they'd never been run. But the motors were immaculate, time-warps, because they'd been bought by BMW R&D to "look at". Make of it what you will :)

[@Blockbuster2033]

@@commontopg3320 Nah, that's absolutely standard in the industry of engineering. And it's perfectly legal as well. You will buy your competitors products, take a close look at them, do some tests with them and then come up with something own that incorporates some of the good qualities of the competitors while preferably not having the bad qualities and being cheaper. As long as you don't copy something that is patented everything is fine. Look at Stark Future for example. They built a new kind of electric motocross bike. They openly said that to not have to do the research on frame stiffness where they have no previous experience in, they bought all other motocross bikes from big manufacturers and tested their frame stiffness. They then came up with their own frame built around their component layout that has similar stiffness characteristics to all the other frames. So they didn't copy anything because they needed a totally different frame anyway, but they derived their target values from researching competitors products.

[@cleverusernamecl5532]

@@DWatso Why would BMW sell some used Nissan engines that they've been tinkering with? Can't imagine the r and d Department would be selling used engines to recoup development cost but I guess crazier things have happened.

[@japerezo75]

@@cleverusernamecl5532 hey Fritz! Can you sell those Nissan engines so we can buy more beer & bratwursts for the weeknd?

[@GrabowskiKarlheinz]

"In 2006 BMW produced their first mass produced tutbo inline 6 called the n54." e23 745i : Am I a joke to you? 😢

[@markwillcock3139]

Do a video on the Australian made Barra in-line 6 Turbo engines

[@lescobrando299]

2016 M4 owner. I’ve had this car for the past 3 years I have a few bolt on and a tune. And the car is a beast she’s daily driven she had around 51k miles the only issue I had was changing out a pulley. Other than that zero issues. Did I mention she’s driven pretty hard hahaha

[@roberthatley7415]

Actually some earlier non competition m2s had an n55, an improved one over the standard version but not an s55 regardless.

[@dmytroolieinikov3821]

Also, e82 1M had the boosted N54 even earlier than that

[@skatman3278]

Would be great if you could do an additional explainer on how the mild-hybrid implemented in the newer B58s is integrated and works.

[@rodgazinya]

It just allows the engine to use the mild hybrid 15hp electric motor as an assist for better gas mileage. I've gotten as high as 42mpg on a 6hr road trip with mine

[@skatman3278]

@@rodgazinya same. Its really good. But it also adds extra HP from what I understand. Be cool to see how it kicks in and takes over at certain points.

[@Noooo23523]

mild hybrid uses an electric motor instead of starter it ads 2-10hp and 50nm it helps it stop start and takes a part of the weight off

[@Noooo23523]

and it doesnt need very big battery

[@drkwsherrill]

Fun video. Owned a 2015 4 series with later edition N55 for 7 years now. Stomped it all over the place for 80K and no issues except broken plastic boost pipe and leaking valve cover. Gotta give props to the rock solid ZF transmission as well!

[@kenthodge4173]

I love my 335i 2008 ST. I daily drive my car for years without any major problems. Maintenance is definitely key if you want to enjoy your N54. I do most of my own work too...

[@christdied4us]

Maybe a good engine but they leak oil from the valve cover oil filter housing the oil pan gasket... Lots of Maintenance required

[@Foozefighter]

true, i have 2 friends that drive 3 series bmw's, their cars are more in the workshops than everyone else, and by saying this, our cars are only used for traffic commuting to work and back, no racing or anything funny like tunes, stock stock

[@thefchassisman]

I would’ve liked to see you mention the special N54 and N55 versions which came with the 1M and M2. Other than that, great video.

[@vinnieesposito8645]

Also X4 M40i F26. W/ X drive it's a sleeper! If you slam it and put big brakes, it could be better than M2 for day to day. Like a big GTR killer! (Well you need to upgrade transmission 😑)

[@ElRayDelRio]

@@vinnieesposito8645 F22 and F26 are both sleepers!

[@legoman911]

Aussie Barra 4.0 I6 turbo was the only true I6 turbo competitor, but sadly no longer made after 2016

[@TheHoosiers2008]

Well done, and straight to the point.

[@HaydensJourney]

I’ve owned 2 335i’s, amazing cars, I love that they’re underrated and undervalued. Bought mine for 8950$ and am pushing 450+ for under 10k total spent. Maintenance done first ✌️

[@centralcoastmuzic8314]

They’re cheap for a reason…

[@nick0164]

@@centralcoastmuzic8314 ehh not really cheap anymore. id be lucky to find a 200k mile 335i for under 10k😂

[@cleverusernamecl5532]

@@nick0164 Recent auction results, lol. Maybe you need to look harder sounds like somebody's fucking you! 2008 B M W 3 SERIES 335I 2D COUPE 7/4/22 $4,000 110,011 - - 6CY/A - - Regular Southwest myCentralAuction 7/1/22 $4,550 107,516 2.3 6GT/A Gray Lease Northeast New England 6/28/22 $2,900 173,496 2.8 6GT/A Black Regular Southeast Atlanta 6/23/22 $2,700 141,941 - - 6CY/A - - Regular Southeast myCentralAuction 6/21/22 $4,500 148,119 - - 6G/M White Regular Northeast NY Metro Skyline 6/8/22 $5,200 122,697 1.8 6GT/A Black Lease Southwest San Antonio

[@755hp]

What I’ve been most impressed with from BMW engine calibrators is how they run 14.7AFR at WOT on their these high compression boost’s DI straight sixes. I’ve been trained that cylinder temperatures need to be kept cool to avoid knock where richening the AFRs for cylinder-cooling is needed. But then again, PFI engines of old (2JZGTE) are an older design; hence, the times improvement in design/efficiencies.

[@tomastarvydas63]

Good point, but I believe direct injection helps to bring down the temperatures inside the cylinder, I believe because atomised fuel has big surface area thus it can absorb more heat directly from cylinder

[@michaell.445]

I could always look for myself; but are the ones that you're talking about also use valvetronic with the staged intakes? Because that makes it function as if each cylinder had its own throttle body and creates a different airflow as necessary for each one!

[@MrPanaramuh]

does help n54 is an open deck block and an electric water pump, temperature wise. More cooling.

[@fry.master]

Lol they do not.

[@fry.master]

Want me to show you the coal on the back of my n54 cars bumper to show you DI under high load is NOT lean…. You are misinformed. it’s only able to do that when it’s under light load cruising conditions, under heavy load it’s actually LESS efficient than the indirect injection. This is because the indirect spray absorbs heat better than the quick squirt of direct, and the larger quantity fuel having to be injected under boost/load means it has less time to mix with air charge. Can you visualize it yet? under light load the DI is super efficient, but under heavy load the port injection mist cools the runner and mixing before the intake valve provides a more even and consistent burn at wide open throttle… Also picture the spray pattern of the direct injector, at low loads those pores are spraying perfect atomized fuel mists into the chamber. At high load they go full super soaker just to try to meet the insane fuel load requirement, which do you think they’re designed to operate at efficiently?

[@KennyHann]

Thank you for making the BMW engines simple and easy to understand lolol. As a MK5 Supra owner, understanding the previous engines BMW used and currently use was kinda confusing. Especially coming from Lexus/Toyota products 😅

[@Youngtruckerdee]

Just got me 535 ‘15 57k miles in 2023. Definitely looking into making this thing fbo and getting 400+ to the wheel. Hoping I can put gaps on scat packs 🤣

[@rokuplayz464]

I have entertained the idea in my head of a b58 swap into my e46

[@337speed]

That would probably be the perfect car😂👍

[@MrR0cketScientist]

What about supercharging the S54 in the e46? I’m thinking about this on mine.

[@e46m54nissansr20937]

You actually did my suggestion Thank you so so much

[@prezsztyber2319]

Really enjoying you channel 👍🏽

[@scottandrews4822]

Fantastic videos! The ONLY suggestion that I can make is to talk more about the specific car that an engine came in, so that it's easier ti find used or buy new. So, foe example, this XXZ engine cane I the 2015-2018 MERCEDES C55 AMG cars. Also, maybe make a video on the AMG "light" cars (C43 , etc) vs the "true" AMG cars (C63, etc,) so that people know what they're buying.

[@johnjackson2349]

Own a 340i with b58 engine and while only at a stage 1, 400bhp at crank is more than enough for uk roads especially as a daily driver. Also worth mentioning mines a pre gpf filter car and sounds fantastic. 4 years of ownership still running perfectly

[@ronaldjoseph9607]

N54 was a nightmare until you dropped almost 10K into it to sort everything and...I still want one in an 135i.

[@I6N54]

Very untrue, owned 2, didn’t have to drop 10k, about 1k in parts to make it very reliable

[@ronaldjoseph9607]

@@I6N54, sounds like you did not own it new. Turbos are shit. Injectors or shit. Electric water pump is shit. Both fuel pumps are shit. Boost leaks due to shitty charge pipes. Walnut blasts. Shall I continue? Upgraded turbos, 3-5K depending what you choose. Index 12 injectors (reburbished) $1,000. Both fuel pumps will run about $1,000 together. Upgraded water pump is like $400. Charge pipes? No idea. Still gotta do coil packs too. All this this like 6K on the really cheap end. You get really good parts and close to 8K. Then....THE MAINTENANCE.

[@callanotis7902]

@@ronaldjoseph9607 you can get cheaper turbos but the 2 fuel pumps being 1k is cap a new hpfp costs 800 shits more expensive now been hearing set of 6 index 12s new are being sold for 2k+ and alot of this shit you wait until there's a problem to replace em idk why everyone's replacing there injectors even if the cars running good and they don't leak.

[@ronaldjoseph9607]

@@callanotis7902. I said refurbished injectors. New injectors are $2,000-$2,500. Cheaper turbos? Yeah, you buy them bullshit Vargas "upgraded" turbos if you want to. You can get both fuel pumps for $1,000. At the end of the day, all these parts are know to fail and fail early most of the time. Get everything out of the way early.

[@bapr3887]

@@ronaldjoseph9607 You should add, crankshaft is shit too. N54 is crap, 3.0 tfsi with compressor is way better engine.

[@irontrev1640]

Love both my N54 and N55 they are work horses but do require work to keep them running well

[@VictorPitstop]

I looooove these videos, man! You satisfying the car nerd hunger!

[@SoI_Badguy]

They really do destroy everything, especially themselves...

[@jeffjeff8562]

The inline-6 BMW family of turbos are so good because of their low-end torque capabilities. Power is pretty much instant. Something like the 2jz engines were known for their peak power. Their low-end torque numbers were bad compared to any of the family of BMW equivalent engines. The "feel" of the BMW is so much better than the older Supras. IMHO.

[@e46m54nissansr20937]

Hmm i thought the RB26 was more of the peaky Turbo inline 6 compared to the 2J, and I assume youre talking about in stock form when comparing BMW inline 6 to 90s Toyota Inline 6 torque.

[@jeffjeff8562]

​@@e46m54nissansr20937 Maybe. I'm not too familiar with the RB26. Just referring to the 2JZ. And, yes, I'm talking about stock form. I currently own a bmw N55. I love the low end torque. Peak torque is somewhere at 2200 rpm whereas peak torque on the 2JZ is somewhere in the 4400 rpm range. There is almost no lag on the N55 compared to other turbo cars I've owned like the 1995 Eagle talon tsi, 1995 Mitsubishi eclipse gs-t, 2008 Dodge Caliber srt-4 and 1994 Toyota Supra. The feel of the single twin-scroll turbo on my bimmer is why I will no doubt buy another bimmer when mine is done.

[@drewdavis239]

bmw has small bore long stroke... makes good touque low. supra 1j/2j / nissan rb , they are short stroke Big bore. high revs, good peak number , but lacks that tree stump pulling torque.

[@e46m54nissansr20937]

@@jeffjeff8562 Thats exactly what i was going to say that twin scroll turbo is a big part of the early max torque on the N55. I remember when the early N55 came out thats what people were saying they noticed with the N55 had great torque

[@ruthnoya8424]

So you're comparing turbo inline-6's that are decades apart? Genius.

[@Big-Lex124]

LOL, the end of this video had me rolling.

[@TheFuxxoWorksGarage]

what a fantastic video! i love nerdy stuff, when somebody gets everything right i also love all of these 6 cylinders, driving the B58 daily in my M340i, its a rocketship even in stock form, but my heart lies in the S55 territory, M2 or M3, the power delivery of that engine, and the fact it tries to kill you even at 1/4 throttle is what gets me all the time. hope i can get one for myself one day🙂

[@John-86]

Just do a stage 2 flash and run 30% e85 won’t cost u more than $600 $700 you will never drive it stock again

[@TheFuxxoWorksGarage]

@@John-86 i live in central europe, cant really get E85 fuel at least in my country... also my dme is locked, so no flashing yet 🙂

[@John-86]

@@TheFuxxoWorksGarage no e85 that sucks. Even running 30% e85 on stock ecu gives a noticeable bump in power. U can run e85 up to around 30% with out any issues on a completely stock car. Once you get around 40% it’s really pushing the stock lp fuel pump anything above that it really can’t handle it.

[@TheFuxxoWorksGarage]

@@John-86 maybe, i never tried fuel like that so i have no clue :-D however, i do get 100 octane premium petrol for the car, so that helps a bit too

[@John-86]

@@TheFuxxoWorksGarage actually 100 octane gives u about the same if not a bit more performance that 30% e85

[@LilJointNoJeeter]

Can you please do a video on Porsche engines ??? They’re my favorite German car manufacturer 🖤❤️💛