Turn Sagola Xtreme 4600 In To New Sagola 4600 DVR Pro

Turning the original Sagola 4600 into the new Sagola 4600 with the Clear Pro cap, a far few people asked me to do a video actually using the new cap in the old gun, as you can see, it works very well and is no different to the original with the same cap, I hope you enjoy the video.Thanks for watching everyone. It really is appreciated 👍
I bought the gun from Sprayguns Direct who stock the full range,
www.spraygunsdirect.co.uk/pro...
Sprayguns Direct New Sagola Air Caps.
Base Cap,
www.spraygunsdirect.co.uk/pro...
Clear Pro Cap
www.spraygunsdirect.co.uk/pro...
DVR Clear Cap
www.spraygunsdirect.co.uk/pro...
HVLP Cap
www.spraygunsdirect.co.uk/pro...
Please subscribe to my KZbin channel, link below
/ @peteshobbies5383
The difference heating your clear coat can make,
• Warming Clear Coat Up ...
Review of regulators and showing diaphragm regulators and how they help stabilisation of airflow,
• Spray Gun Air Regulato...
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Comparing different clear coats;
• Clear Coats, Mipa CX4,... est Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only. The views expressed are my own, and should you choose to follow them, you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching

[@stevejohn5624]

Out of all the guns you've tried which have you found to have least overspray .thanks and videos/advice first class.

[@peteshobbies5383]

Hi Steve, There's a few, really, but the Wider4L and LPH400 spring to mind in the full-size category, mainly because they run at low pressures, having said that, many run them at more pressure, this obviously increases the overspray

[@ScottMack-qs6qk]

Thanks for this information. I’m amazed at the amount of work you’re willing to do to instruct us. You’re an animal. Keep making and I’ll keep enjoying them.

[@peteshobbies5383]

Hi Scott, I genuinely enjoy seeing what, if any, the differences are between different guns, in this case, the old and the new. Manufacturers will often tell you it's "all new" , sometimes it is, often it isn't, nothing wrong with not changing things much, I'm fully behind that to be honest as it makes what you already have more updateable if you want to, especially when, in the case of Sagola, its excellent anyway 😉 . Thanks for watching mate, it is appreciated 👍

[@srodgie]

Hello Pete, many thanks for the video and the clarification, mate. I will save my pennies and will get the clear pro and possibly the new base cap! Cheers! Steve 👍

[@peteshobbies5383]

Hi Steve, No worries. I didn't realise so many would be interested in a retro fit, but there were a fair few, cheers mate 👍

[@srodgie]

@peteshobbies5383 yeah, I wondered also Pete. I will order the Pro cap when I get paid. I would like to know for sure if the new Base cap is an improvement on the aqua cap & if it is, is it near as good as the DV1 base!? Sagola have the best of both worlds here.... eventually people will have to buy the new spray gun & existing users can upgrade! Cheers, Steve 👍

[@JohnWD40TC02]

Hi Pete, great video as usual mate with lots of useful info for anyone looking to get the new 4600 that already has the Extreme, I recon that Sagola missed a trick here with the new gun as I don't think they banked on people like yourself figuring out that the inner cap is the same size on both guns so all they did was to change the outer bezel🤦‍♂😅 I can just imagine all the top people at Sagola huddled around a table in the boardroom thinking of a way to silence you by offering you bags of money💰to retract your video then recalling all the current tip sets out there and changing the size of the inner cap😨🤣

[@peteshobbies5383]

Hi John, Yeah, I'm not sure whether they will be annoyed or quite happy. It does seem from what I'm hearing that the new caps do perform better than the old, so I'm sure Sagola will be selling lots of caps at a list price of over £100 plus tax which must be quite lucrative. Someone has said their new 4600 Digital is 4g heavier than there 4600 Xtreme, so I think only the none digital is lighter by a little. I'm rather happy with what Sagola has done, I have always liked my Sagola 4600 Xtreme, and this just means it is as good as it's ever been, and all my tip sets fit 😀 Cheers mate 👍

[@JohnWD40TC02]

Haha!! it might be the case then that they still give you bags of dosh to promote the fact that the new air caps will fit the old gun and use your video as a demo on how it's done, either way mate it's a win win for you👌😎😂 I would like the new 4600 but I've decided my next (2) gun(s) will be the Porphis 717 and the 625, I may even wait a bit longer then get them both at once as it will be a bit cheaper I'm in no hurry to get them, I also want the MMC4 as well🤦‍♂mate I better start selling some body parts🤔😂thanks Pete👍

[@peteshobbies5383]

@JohnWD40TC02 I must say, the two Porphis guns are excellent, I think you borrowed my PRD625, so you know what that one's like, Cheers mate 👍

[@JohnWD40TC02]

Yeah I borrowed the 625 and the 715 and as you know I loved both of them😄👍

[@peteshobbies5383]

@JohnWD40TC02 That's right, I remember now, you broke one of them if I remember rightly 😉😂

[@MiamiGabe305]

Great video, I'm curious to see what type of finish the guns can get with all applications of the paint process. Or at least cleared over base. I know flow coating makes clear look flawless pretty much with any gun. Nevertheless great video 👍

[@peteshobbies5383]

Hi buddy, I only have the new gun with one cap, the Clear Pro cap, I will get a chance to use it on base and clear, but the main purpose of this video was to show the people that asked, that swapping the cap centers over works perfectly well, the gun cap seals fine and all measurements as the same of old and new. My next task with be seeking how the Titania Pro cap compares to the Clear Pro cap, so the same component side by side as I suspect the new cap can give a flatter finish. Thanks, buddy. I appreciate it 👍

[@lesliwells5433]

THANKS FOR THE NEW VIDEO MATE, THIS WAS a very good video to help save money and get a BETTER FINISH ❤

[@peteshobbies5383]

Hi mate, I was quite surprised at the number of people wanting to confirm it works OK, hence the video, but the old works fine, exactly the same as the new with the same cap, appreciate it Lesli, cheers mate 👍

[@bryankelley6687]

Hello Sir, excellent video, I don’t think I’ll be changing caps around, because I shoot primarily single stage. I did get in the new 4600, and am definitely ready to put some paint through it. The other one I picked up as well, is the 4100 xtreme pressure pot gun. With my projects getting bigger as you’ve seen, I need longer shooting times, and pressure pots will definitely achieve that. When I get some shot, I’ll send you a message, and let you know how we’re getting on with it. Cheers Sir, take care

[@peteshobbies5383]

Hi Bryan, Yes, send me a message when you've had a chance to use it, I think you'll love it 👍

[@benjaminchu6699]

Great content, as always, mate!

[@peteshobbies5383]

Thanks, mate, much appreciated 👍

[@andrewntoth1]

You just showed me I've been putting my titania pro cap together wrong 😳😳 , I've been putting the black gasket between the manifold and the air cap 🫣😳

[@peteshobbies5383]

Hi Andrew, I went through this with Sagola around 5 years ago when I bought a used but excellent condition digital 4600 Xtreme with 2 spare caps. The DVR Clear cap had what I thought was a baffle missing. It turns out it didn't have one as standard, but Sagola was good enough to send me all the information on how the caps should be put together, so the seal definitely goes at the front, cheers mate 👍

[@costask823]

Hi Pete you are absolutely correct. You can interchange the air cap centers. And they spray the same. Comparing the 4600 digital to the 4600 digital xtreme in terms of weight: My 4600 digital seems to actually be about 4 grams heavier than its xtreme digital counterpart. All this said I absolutely love my Sagolas., Xtreme and 4600. No matter what cap I put on them old or new they make my life easy. And they have such a wide range of use and versatility. Thank you for the videos and for taking the time to tell it like it is!

[@peteshobbies5383]

Hi Mate, I quite like the fact that not much has changed. The cap does most of the work, and being able to retrofit the caps is, imo great 👍 I haven't got the new version in digital and had assumed it would be lighter than the Xtreme but sounds like it's not, it is with the none digital version, thanks for confirming all this, it gives people other opinions than just mine which is always a good thing, cheers buddy 👍

[@J-SPRAYAUTOMOTIVEPAINTING]

My new 4600 digital weighs in at 579.8 grams. Not sure what the extreme weighs in at but curious to know

[@J-SPRAYAUTOMOTIVEPAINTING]

That weight is with the pps adaptor and air adjuster installed too.

[@peteshobbies5383]

I'm away at the moment, but when I get back, I'll check. If I forget, give me a shout 👍

[@costask823]

@@J-SPRAYAUTOMOTIVEPAINTING Hi my 4600 digital with a PPS 1 and the air regulator without the air hose adaptor weighs 547 grams. Same setup on the Xtreme digital 543 grams. I hope this helps.

[@juanrivera8566]

Hi Mr Pete hope you're doing fine. I was wondering about the video review of the Chinese Avalon 400. I see that you liked the Dram and now I know it's a good cheap gun. Cheers!

[@peteshobbies5383]

Hi Mate, I'm still testing the Avalon. I hope to get a video out soon, though 👍

[@K1NGD0MDOWN]

Hi Pete, I've discovered a strange phenomenon with using upol s2080 & s2086 clear coats, I've tried many attempts at mixing my filler ratios, I've tried different fillers, I've tried longer drying times & many sealers & primers, every time i paint over a repaired area, (only happens with white & lights colours) It has a horrible reaction with the filler beneath and stains my base & clear a horrible orange/ yellow colour, looks like someone's pissed on it. I've tried another brand of clear I had and it seems to have fixed my staining bleeding problem from the filler. Have you ever had a similar problem & do you have any recommendations on a Good brand of clear i could switch to? Regards

[@peteshobbies5383]

Hi Mate, I hadn't had a problem , I rarely do whites, I sometimes do a couple of different Honda 3 stage pearlescent whites and haven't had a problem. I use Upol 2025 primer most of the time, normally leaving it till the next day for base and clear, although if it's a bumper corner on the car, it's just lamped for 30 minutes and ok to go depending on ambient temperature. The problem of clears on whites going yellow is often bought up, some clears seem to do it, others not, it also depends on the paint system as well. If you after a good clear that isn't too expensive, try the Kapci 6030, it's very good and not too expensive, I can't say it it will help with your particular setup but may be worth a try, you can get little 1 1/2 litre kits

[@K1NGD0MDOWN]

@@peteshobbies5383 Thank you Pete, some really good advice, I've just ordered some. Hoping for the best, been a nightmare with customers coming back with yellow filler stains on the job.

[@peteshobbies5383]

@K1NGD0MDOWN Hopefully, it will sort the problem out

[@ANDY-we7mr]

Hi pete I thought the caps you could not change to be honnest I like the old sagola extreme 4600 1.3 aqua as you know good video through 😊 pete if that's the case mate if you have a sagola extreme 4600 1.3 aqua like me mite as well buy a Dvr Cap and you have a base coat paint gun and a clear coat paint gun instead of 2 guns just change the cap for £120 😊

[@peteshobbies5383]

Hi Andy, Yes, that's always been the case. Everything is the same apart from the cap, same with the Devilbiss Pro Lite . You just change the cap 👍

[@lukeowens3544]

The true test is metallics.a few videos say the metallics layout a lot more even not blotchy compared to the xtreme.Still waiting on all 4 of my air caps to arrive. Hvlp cap they had to order. Sprayguns direct had to order my ani-black 1.2 wb setup as well.I want to try that wb cap out with clear. It’s not curiosity it’s for science purposes 🤣🤣🤣

[@peteshobbies5383]

Hi mate, I haven't got the Sagola Base cap yet, only the Clear Pro cap, I really like the Aqua cap to be honest, seems to handle metallics and candy's well, maybe the Base cap is better, I'll wait till I can afford one 😉 😀.

[@lukeowens3544]

@@peteshobbies5383 with the xtreme with the solvent base I’m using the dvr clear cap shot the best🤣 aqua second ,hvlp 3rd ,and Titania a big No for base🤣 hopefully these new caps bring out the true potential for solvents🤘

[@jeremyoetken2094]

The new base cap is better than the old cap for sure

[@lukeowens3544]

@@jeremyoetken2094 good because it is difficult with the xtreme for me at times to get metallics to lay pretty with out treating it like single stage 🤣

[@jeremyoetken2094]

@@lukeowens3544 I might do a review on the base cap on my channel j-spray automotive painting