Top 5 Problems Jeep Grand Cherokee SUV 2nd Generation 1999-2004

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@tophersupreme5573]

I have a 2004 with 301000 miles and I've only a few issues. Best automotive purchase I ever made.

[@jasonprince8655]

2004, 4.7L, 197k and I have had only the rust issue. Living in Salt belt, so I will have rust issues with any vehicle.

[@Kanakid]

2004 was the best year of the WJ. I have one with 200,000 miles it still runs great. High Output motor.

[@DL-by8el]

What engine and what gas milage.

[@FromSaultoPaul]

AWESOME. I just bought one from a friend but now ex-friend. He raised the offer price just before I bought it by $300. Oh well, it was a 04 Grand Limited WJ with 145,000 ml. He had the big package of the 4.7L. He had a cover for it but parked it and never used the cover. So far it is tires, a battery and power steering pump. Hopefully no more problems with it as I got for 1/3 book price. WHAT A BLESSING.

[@ascendantrobin3230]

@@FromSaultoPaul its an awesome jeep! i have yet to sit in a car that has seats as comfortable as the leather WJ seats! I6 or V8 are both great engines and are reliable when you perform routine maintenance and keep them from overheating, they can run easily to 250,000miles

[@bumblebee5337]

I own a 2001 Grand Cherokee Laredo 4.0 I6. Problems I’ve run into that seem to be common with the 4.0 I6 WJ: -Brake light housing bad connection (causes brake lights to go haywire while running lights are on) -Window regulator failure (always keep wedges for windows on deck) -Calipers tend to warp rotors (causes death wobbles only when braking) -Radiator leak causing overheating (plastic top hose intake cracks) -Cylinder 3 misfire (caused by heat soak) -Struts fail (struts under hood and tailgate fail) -Knocking noise from transmission (flex plate and torque converter bolts come loose and make knocking noise) -A/C doors get messed up -Valve cover gasket oil leak -Body Control module failure (running lights flicker, horn honks, displays flicker, etc.) -Side mirrors get loose and fold too easily (can be pushed close by wind) -PCM failure (power control module fails causing car to stall while driving or idling/will not start) -Transmission fluid leak -Carbon build up in throttle body (just needs cleaning) -Hose to pcv dry rotted (easy fix) -Water pooling up in passenger floorboard (AC condensation drain gets clogged, clean line with a wire) -Cam shaft position sensor failure (can also cause misfire) -Door skin panel clips break easily (I have a burning hate for those clips) -Brake dust covers ABS sensor causing ABS light -OEM Front door 6X9 Speakers blow out easily That is about all I have run into over a long time of owning a WJ. Quick tip: if you have a OBD II scanner that isn’t picking up codes always check the onboard scanner, start with key in off position then turn it to the start position without cranking, repeat 2 more times and this will tell you all the codes.

[@brandanbouchez8412]

You didn't say anything about all the broken wires in the door jambs

[@idahospyder1620]

I've had to fix the drivrs side a few times.

[@jasnonya3005]

That's most often the ground wire in my case

[@THEDRIVINGPROFESSOR]

@@idahospyder1620 same here.

[@ascendantrobin3230]

haha i thought i was the only one thinking of that!! 🤣 yep, rewired the driver door wire boot too many times!

[@wbball15]

AMEN

[@ericstathis67]

I have an 04 limited as well as an 18 cherokee trailhawk and the WJ is still my daily driver. I put over 200k on it myself after I bought it in 05. Over the years I've had plenty of issues: thermostat, new radiator, starter, alternator, FIVE window regulators, rebuilt front diff, new crankshaft, front cd player eject broke and no clock or radio display. Also a few batteries, brake jobs and tires and tons of light bulbs. There is also a gremlin which will turn on the rear lights that won't turn off unless u drive forward. Original exhaust, although the hanger broke a few times. It also leaks oil like a civ having said all that, it runs great, has a perfect driving position, excellent vision all the way around and it's a blast to drive. I love it!!

[@charlesknight5140]

Gotta love those Gremlins. LoL have a Blessed day

[@digitaldreamer5481]

I replaced my thermostat with a cheap one from the local auto parts store and noticed that it didn’t have the small circulation hole near the top like the old one, reside in the warm climate of Hawaii. So I put the new thermostat in place to mark where I was going to drill a small hole towards the top. I used a 7/64 drill bit and made my circulation hole, then did the install. While I was at it, I replace the coolant sensor, which is easier to replace outside the vehicle. The whole job took me about 35 minutes and has been working great for almost a year now. Great video! 5 Stars in my book. I love my Jeep!

[@francescobailey101]

I have a 2003 Jeep Grand Cherokee 4WD exactly like the one in the video and I've had it for 7 years now. It's still the most reliable car I've ever had but the issues he described are very accurate because I'm currenting having differential problems which is not cheap.

[@rustyshackelford4613]

My brother warned me about that, exactly how expensive is it ?

[@lostbooks2918]

$750 cheapest usually over $1000

[@jsavage9134]

The blend door is simple though, get you some hvac tape and change it yourself every year, it’s more annoying than anything!

[@baconstrips6260]

Thats a 2004 WJ in the video not a 2003.

[@tinysampson8832]

I have an 2004 I'm second owner n I've had a few issues but watching this I think my thermostat is sticking. No differential trouble yet. 200000 plus miles

[@pronmaster09]

This is actually very interesting I've owned 4 of these guys for over 8 years now and I only get the seals issue. super interesting! They are super reliable, and I haven't had your specific problems, and on top of it the jeeps are way easier to work on than modern cars. but great video very interesting to learn what people get into working on these things, also great topic with the rear control arm that was a great touch.

[@henrypetersen4133]

Window regulators: If you live in a hot area like central CA, the plastic in the window regulators break easily. Here's what to do to avoid breakage, when you roll the windows all the way up, release the cable tension by momentarily pushing the "down" on the window switch. When lowering the window all the way, push the up on the switch to release the cable tension. You can thank me later.

[@toma.6942]

2004 overland 4.7HO qudradrive.... Daily driven every day since I bought it... Best suv I ever had.

[@stevebananas5788]

It goes everywhere

[@ascendantrobin3230]

i had an ‘04 limited with the v8 and quadradrive, oh man that thing was a beast! 💪 I am looking for another! 👀

[@D41Michigan]

Nice! I'm in the process of picking up a 01 Laredo with the 4.0 as a project. Seems mechanically sound save for a head gasket (relatively easy fix) but it does run with a miss due the gasket bleeding compression between 5 and 6

[@ktdgolive405]

2002 4.7 ol myself🔑🔑🔑🔑

[@rustyshackelford4613]

I heard that some people had problems with differentials is that true ?

[@joeyhdz3435]

great explanation my friend! of everything... very humble, great job! keep up the good work .

[@derekwillbanks5645]

My favorite problem on these jeeps is the door jam wires that break and cause all sorts of wierd electrical gremlins.

[@g.cosper]

Drivers window got stuck halfway up AND after turning off the vehicle it wouldn't start. One mech told me it was up in the engine area because he used his jump starter to avoid the interlock and the car started; estimate 300 bucks for parts alone. After research, I cut open the boot holding the wiring between the drivers door and the engine compartment, found a broken wire and fixed it with a band-aid. Did go get the proper wire bridge that day and has been fixed for the past 5 months for $12.

[@rlauntz53]

I have a 2004 4WD 4.7 H.O. that I bought in 2010 with 49k miles. I've had it ever since (for over 12 years) and it has been great! I've had, or have, some of the issues brought up in the video. I got tools to help me work on the Jeep now (jack stands, floor jack, and a creeper) so I can better work on it. Pretty soon I'll be replacing the power steering pump, oil pressure sensor, the thermostat and possibly the water pump.

[@enriquevenegassouper3445]

100% true!! only miss O2 sensors problems in v8 version, but still worth it, its an amaising machine!!!

[@davidwarnick]

The extra added problem fit my 2004 Grand Cherokee to a "T"! Drove far too many miles before I found the problem, but once fixed, my Jeep runs like brand new!

[@bradbryant7887]

Good video. I love the WJ series Grand Cherokees. I have 2 2004 WJs, one with the inline 6, the other one is a special edition with the 4.7 V8 all time 4WD. I have had to replace the window regulator on the special edition and I had to do new seals on rear differential, axels, ball joints on the 6 cylinder. Over all these are great vehicles for where I live (Colorado) and would probably buy another one if it was in good shape with lower miles. So much more comfortable than the XJ.

[@johnswanson3741]

Recently reviewed all these comments. Made me laugh to read all the stupid nonsense. 2nd gen Jeep Grand Cherokee's are roughly all 20 year old vehicles, with most having over 200,000 miles. People comments about what a bad experience they had with their Jeep. Ha, ha, ha. These are the last best built SUV's made, and they are reasonably priced. Maintenance issues are a fact of life with older vehicles, but these Jeeps where built to be abused in a way that a newer SUV will not withstand, period!

[@diannawells6866]

Got a 2004 gc with 285k on it, had very little issue with the jeep. Mechanic say very clean underneath it. Love my jeep.

[@Jeepfeenz]

Jeep FEEN'Z

[@306-fromthestix]

Thanks...you just solved the ball joint sound coming from the rear end that I couldn't find.

[@pennypackmtb2542]

Restoring my 2000 Cherokee. Redoing entire suspension system with a lift. Front and back bushings were gone. Found no leaks down there. Replaced my window actuators too. Radiator and Brake lines I would add to your list.

[@viperrottweiler5311]

#1 Death Wobble #2 4.0 Engine Tick #3 Crankshaft Sensor #4 Fuel Injectors #5 Dent On Hatchback

[@1AAuto]

+VIPER ROTTWEILER Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@dakotadriggers8838]

This is like 10% of the common issues in these jeeps

[@Jay-td5kr]

Have an 04 with 150k on it, great reliable vehicle. I have had 23 different cars/trucks over the years and this thing is a runner...4.0. It Does suck on gas though, other than that it’s awesome

[@CameronDC-Grimes]

You should add the door harness wires breaking from normal use of the front doors, causing power windows, power locks, power mirrors to fail. In some cases a ground wire in door can cause issues with ECU that controls the fuel trim and other things

[@fatherof3792]

What's the fuel trim? Found broken wires in Driver's door and all of a sudden it won't stay on...

[@broch61]

Crankshaft position sensor is #2 common issue with door jamb wiring being #1

[@1AAuto]

+BRAD BROWN Thanks for the feedback!

[@TheNiteNinja19]

Yeah I had that, the TPS, and o2 sensors all go bad about the same time.

[@frankowilcox4070]

Dealing with my door jam harness currently 🤬

[@angelinacandelaria7518]

Mine chewed through shocks like crazy. Also the brakes and rotors worked correctly, it chewed through them scarily fast.

[@pronmaster09]

I can second that!

[@12345gizzmo]

You didn't mention the most serious problems ones with 0331 heads cracking between 3/4 cylinder and piston skirts breaking off and the wiring in the driver's door shorting out or breaking causing your security system to go off every time you put the key in to unlock the door

[@1AAuto]

+lynn hurd Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@justinhappel9169]

My horn honks every time I unlock with the key. Good to know why. Lol

[@chasermalloy7406]

Well the heads cracking is most commonly cause by incorrect maintenance of the cooling system. Doesn't matter how many warnings there are in manuals or stickers in the engine bay, people don't bleed the system properly after refill. "the air works itself out " is the common cry. Well it doesn't in many engines. That's why bleeding is essential. The other thing people can't get through their heads is that when a modern car overheats you STOP. Oh, we're only 8 miles from the mechanic or it's only 7 miles back home..it'll be ok. Well it WON'T be ok. Even an expensive tow is a lot cheaper than a new engine. Use your heads and you won't crack your heads.

[@BigbackluvR]

This is definitely a sign. Was looking into this specific model & years. Good information to use!

[@Timmy2024-y5g]

dont buy one. lol

[@jasonprince8655]

Easy fixes for a vehicle that can see 300k miles.

[@negrokrilinful]

Had a 2001 4.7 limited, worst car we have ever owned! Failed once every one or two months. Sometimes the key wouldn’t even turn, and all you heard was that typical chrysler ding ding ding sound, which brings me really bad memories.

[@manbearpig2164]

This is a ridiculous video, jeeps last longer that most vehicles, these so called problems happen to other vehicles all the time

[@654Crossman]

@@negrokrilinful the first 4.7s were kind of crappy. It was the first DOHC V8 used in a jeep. It had aluminum heads like the previous 5.2s. The first 4.7s had a bad tendency of overheating and causing catastrophic damage, quickly. However, I have seen later 4.7s and even old rebuilt ones that have lasted well over 200,000 miles. I prefer my ZJ over the WJs, but they are still fairly easy and cheap to fix...

[@xXDarthBagginsXx]

Brake master just went out on my '01 - already replaced a radiator, rad fan, fan relay (the one hidden behind the bumper cover), waterpump, thermostat, coil packs, upper and lower rad hoses, and the valve cover gasket. Dreading the day I have to replace the heatercore

[@MrBigjoe2400]

I’ve done exactly the same. Did the heater core last summer and wasn’t really that bad.

[@susu-mi7kx]

DB Cromartie. Which skinny hose do the upper and lower steel metal lines from radiator , connect back to? the top line from transmission to upper radiator steel line? driver side. please reply

[@domnicclassi3823]

J.E.E.P. just empty every pocket I thought it was going g to be a lucky buy on a cheap 4x4.

[@Spyder6664]

2003 4.7L HO Overland, owned for 15 years now. Blend doors was the only one I have encountered. 3 times. Eventually had them welded open so only warm air comes through. AC in UK is hardly an issue. Other than that, best motor I have ever owned. Nice vid.

[@lyndseyhunter9244]

Steve I'm in the UK! You sound like someone who knows a bit about these jeeps. I could really do with some advice on mine as no one has any knowledge on it as they don't know older 4x4s

[@paweee6677]

I have this H.O 4.7 from 2004 with the current mileage of only 10,500 miles, half a year after it was brought, it was 6.400 miles, then it was brought from Chicago and stood for 13 years

[@SmAfzalur]

I Love My 2001 Jeep Grand Cherokee Laredo, I Love You Man... Thank You for Major 5 Problems about 1999-2004 Jeep Grand Cherokee...

[@junioraugust8797]

yo! @ 9:13 is by far my favorite part of this video lol love this guy. 1a auto is my favorite youtube channel by far!

[@petergrant2331]

I took out my glove box out and manually turned the blend door for heat everytime I started it in winter

[@thebasherdude__473]

Me too 😂

[@THEDRIVINGPROFESSOR]

Which I would have know that. I froze every winter.

[@ekimp252]

I’ll be figuring out how to do this, been freezing in my ‘04.

[@ZenithClarity]

So the blend door is easy to get to? I know its a bitch in many vehicles, whole dash has to be taken apart!

[@madamevaughn1]

Show me a video of how lol

[@LaCapernB]

This was super informative thank you!

[@byronwhitney665]

Nice overview. I’m in the process of restoring a 2003, 4.7L HO. I’d like to mention two things I learned. 1). When doing any work that requires new radiator fluid, you MUST properly bleed the system. It’s the only way to get the air out of the system. It’s a simple process, and it does not take a lot of tools. But this process is extremely important to ensure the proper operating temperature. If you hear a gurgling noice coming from under the hood after you shut the engine off, you have air trapped in your coolant system. Please don’t ignore this. It may lead to serve damage to the engine. All you need is a 3/8” ratchet or breaker bar, and a 3/8” drive, 8mm socket. 2) If you are experiencing blend door issues, make sure you check the actuator. The “shafts” on the actuators are plastic. Over time they deteriorate, become brittle, and brake. Removal and installation of the actuator is very simple. Only 2 screws and a single electrical fastener. The brand new part is about $60-70. Or you can check at a local junk yard, and get one for $15-20. If the shaft is not broken, it usually works fine. I always pay $1-2 more at the junk yards to get a 30-45 day warranty.

[@Jay-dp5wp]

How's the V8? Thinking about getting one for work

[@andrewholden7503]

On your number one issue you talk about air being trapped in the coolant system.. you mentioned the tools you need to take care of this problem.. now how do you do the procedure with all those tools that's what I want to know

[@CameronDC-Grimes]

@@Jay-dp5wp I have the 02 Jeep Grand Cherokee Laredo 4.7LV8 standard output engine and the engine is robust with 222K miles on her. I love my Jeep

[@robertqman5751]

2003 GC Overland 4.7 .. Had the blend door issue twice. Replaced 3 window regulators (both rear windows and drivers window twice). Rear axle seals replaced. For the last 2 years I have been fighting seized brake calipers. All wheels have had seized calipers that had to be replaced with fronts being done twice. Replacement calipers were under warranty but still why?? I think it is the material the pistons are made of .. shrugs. Currently have to replace rear seal on transfer case but no hurry. I use mine mostly in the winter now. Was my daily driver for work until this year. Other than the rockers rusting out (Ontario salt for winter) it has been fairly good vehicle. You definitely want to be able to do the work yourself if you own a Jeep.

[@microtechmachineshop]

I've owned a 99 and a 04 two of my favourite vehicles I've owned

[@lordofwar9638]

Idk how they narrowed it down to 5… I was constantly wrenching on my WJ. 😂 Still loved it tho.

[@hunziro123]

Thanks for your information, i will buy a Jeep 3.1L from 2003 im from Germany and this is my first jeep and you help my very well with your information, thanks a loot for your video !!!

[@victoriadel91]

I have a 2004 4.0L grand Cherokee, 😢 I honestly love this vehicle it's not given any issues to me but I do maintain it, but she's way better than having a car payment too, and I do go off roading too

[@damianpasour]

These are very solid made vehicles The WJ Are awesome these are very reliable if you take very good care it and do your maintenance they will last 😊

[@dantee323]

Very helpful. My front diff is leaking and this helped me realize how to fix it

[@jstar1000]

Looking under that rusted out POS sure makes me glad I live in Texas. A 20 year old WJ will still look almost new with no rust what so ever.

[@mavelikkra]

Appreciate that you had mentioned all the problems, please make a video how to fix as well

[@onlytheplanetmatters]

Literally bought a 2000 WJ Limited at auction for $4,402 last week. Probably the same day you posted this video~

[@albertpaulin9356]

I love your videos very educational. Also I have a question I have a 2001 Jeep Grand Cherokee Laredo 4.0 and recently I notice the tachometer started jumping up and down from 700 to 500 rpm’s and I also vibrates mostly when I’m on a complete stop because I notice the issue goes away once your actual in motion and to times it almost drop behind 400 but only in that moment when I was a complete stop

[@javier8639]

What size are those tires?

[@alans.4167]

I had a '02 with the 4.7 HO for 270k miles until it got hit by a drunk driver... replaced one window motor, radiator, heater core, thermostat, and a starter besides the usual battery, brakes, etc..

[@chasermalloy7406]

Exactly same as my 02 overland

[@originalsupermommy]

Love my WJ, '02 Overland 😎

[@DL-by8el]

Wish mine was the ocerlander. What gas milage do you get?

[@junkmail9625]

you talking about 20 years old car, it look like the old man 80 year old, of course it get sick everywhere. but I am lucky. My 2004 Jeep Grand Cherokee 270,000km did not see the problem like you said , only change oil, battery, and drive nice. love it

[@1AAuto]

+Junk Mail Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@299tactical6]

What about 4.0L rear main and oil pan leaks?

[@squidysquid7586]

Mine just started💀💀💀

[@sal.torres9070]

Very helpful info. Thank you very much. I love to watch your videos.

[@geetoussaint8796]

The radiator hose on top poped off my 2004 grand jeep Cherokee limited edition the temperature was cold and 4 degrees out I put it back and ran it for 10 min then it started acting up I had put water in the reserve but the hose did not come off again but leaking can't remove the radiator cover I need some advice

[@doranvee5944]

Seems 2b a lot of crossover & similar problems same years w/ Dodge Durango & Dakota. Have you done a video for the Dodge? Still a ton of them on the road, & they have proven 2b durable and sought after. Thanks

[@user-zh7th2ge1c]

Great video, but i would like to hear if a job is hard or easy and whether its cheap or not to get repaired. Really adds to my purchase descisions. :)

[@harryjones]

I have had a 1st generation 1995 gc and it was awesome. Best jeep off road and so reliable. I bought it for $600 and in 10 years i only had to replace battery twice and brakes once. I now have had a 2004, 2000, and now a 1999. The 00 and 04 lasted each one summer before everything started breaking. The 99 has blinker and tail light issues but other than that it has been ok. Nothing beats a 1st gen 1995 with a 2" lift from factory and the only jeep with true part time 4wd and true 4wd low. Look it up. Made it amazing off road.

[@Patrick-qn3kv]

just bought a 2002 jeep. the rear differential is a prolem I think due to age. It looks like the rear bushings are pushing out is that dangerous and what happens. Also the axel seal is leaking I guess there is muddy junk and the back of the brake hub is that dangerous? and how. Also on the rear A arm the mounting bushings are starting to separate what happens if that goes

[@bj64bj36]

hi love ur video many things u discussed have been fixed, problem im having only moves in 4 wheel low, transfer case?? we rebuilt but not new oil pump ran out of time🤦🏻‍♀️help

[@ThompPL1]

Got that "Mad Money w/ Jim Cramer" feel towards the end ! ; )

[@darrena.247]

Great Video.!!! Thank You Very Much. I have subscribed to your channel. Awesome Channel

[@elenasjuanlove47]

I really appreciate the way you explain everything to fast for me but good info .BIG QUESTION AFTER I CHANGE THE FRONT BREAK AND OLIO. THE NEXT ASTAR LIKING FROM POWER STICK FROM JEEP GRAND CHEROKEE LAREDO . HOW CAN I FIND OUT FROM WHERE? I NEED HELP ASAP

[@georgewarner1071]

Thank you brother I had just replaced all of #6

[@bowilliams8403]

I’m surprised no ones talking about the heater core problems! I’ve owned 3 of these Jeep’s and every single one started to leak!

[@jamestaylor1078]

I think it's because they come from the factory leaking lol I'm getting ready to change my heater core but I don't know if I should replace it with a Mopar one or another brand.

[@pronmaster09]

I've owned four and none of them have leaked for me!

[@saylow595]

When I tried to get my heater core replaced and they asked what vehicle. There was always a long pause when I said 2000 G.C

[@Don-sh7ee]

thanks for the info..much appreciated! I have a 2002 JGC, but unfortunately I've had to replace the 4.7 engine only weeks after buying it!

[@alec4908]

I have a 2001jeep Grand Cherokee limited with the quadra drive in the snow my rear wheels move but my front wheels are doing nothing. Fluid is all good. What could the problem be? Thank you

[@tonyengstrom2821]

Fun jeeps I have a wj right now lifted 4 inches 31 inch tires different bumper just took it to a jeep park and had a blast got stuck 3 times but broke nothing my has that wobble he was talking about f it it’s more of a trail jeep than a road jeep might put 5k miles on it a year so fun. Can’t wait for the next time.

[@juliorosas-cortes424]

I’m about to go look at one, I took notes! Thanks.

[@larrywho61]

What causes front end differential deflection? I have wheel hop when I first take off and I can feel a slight vibration when driving at low speed? Does it need to be rebuilt?

[@V8orNoCar]

I have a 01 with the 4.7l, 186k miles. Major issue I have is I replaced the power steering pump and was working smooth but now the steering wheel is impossible to turn, the pump is working fine, no whines. Could it be the gearbox? Literally undriveable right now…

[@johnneumann1080]

The window regulator on WJ is cable driven and usually the plastic guides break. The Blend doors that bind are only the Dual Zone heater systems. This is what the Blend door sub assy was releasd for.

[@ericschulze5641]

Absolutely the plastic guide breaks

[@wincatalcala6258]

Love your channel, very informative. Keep it up!

[@raulrodriguez4162]

I have a 1994 jeep Cherokee 4.0 when I drive sometimes I feel the left wheel jumping like a basket ball is a scary moment ,so I have to lower the gas pedal to top the jumping , Wht do you think it is?

[@josebustamante22]

I have a 2004 Jeep Grand Cherokee, Limited edition and I lost the key and took it to the dealership to make a new one. Well when I got it back everything worked fine except that now the interior lights dont come on when the driver door is open. also the seatbelt light dose not turn off when we get buckled in. Is there anything I can do to remedy this problem. The dealership said the key was programed to the jeep and they cant do anything about it.

[@jackmcclearen2273]

I heard you say actuators with an S please comment on this and tell me how many actuators is in a 99 jeep grand Cherokee 4.7 V8 I found only one in the glove box area left side. What is a mode door actuator? Is there any in my jeep?

[@beefsupreme79]

What’s your opinion of the Mercedes Inline5 2.7L Turbo Engine? I was looking at a nice 2004 WJ model but I wasn’t sure about out the engine. It’s done 260k kms. Thoughts?

[@darionmorrowdm]

I have a 02, and recently lost power to radio/ climent control and cluster.(cluster is intermittent) and suggestion? Personally was thinking it could be the body control module (BCM) and advice would help. Have already replaced battery and terminals. Thanks

[@Trollet456]

Leaking rear axle at the pinion and inside left tire so i have to top it up with oil once in a while. also the abs warning light is on. Oh almost forgot a small leak at the transfer case also. I have resent changed alternator, thermostat and did a AC pump bypass

[@mecoronel691]

Hi, I'm having issue with left signal light, work sometimes. Also this morning my electric seat, all working except front back. Only moves slightly in both directions. I'm short and need to move forward. Plz help

[@dannydisanto1008]

I have 2004 grand cherokee overland w the 4.7 HO motor i done replaced inside&out wiring harness couldn't figure out why interior lights won't turn off

[@durantplayz7111]

I have the same but 03 and 242 selc trac. I love it. But ive already replaced so much my self. Its having trouple getting out of 1st gear now.

[@rasientertainment9843]

Nice video

[@connectwithpastorkurt5246]

I have a 2002 GC 4.7 liter that “groans” when turning at low speeds. I’ve changed out the differential transfer case lubricant and made sure as used the Mopar specified stuff that matches the tag on the case. It didn’t seem to help, at least immediately. Will it take time or could it be something else. Thanks

[@ScottBurdick-y4r]

I have a 2000 Jeep Grand Cherokee limited 4 by 4. It only goes in reverse for 2-in. Ben you hear a ping noise when I go no further watch rear end is that some type of pin in the rear end? Or is it my transmission

[@dironizareyes596]

Great video

[@darrena.247]

Excellent video. Thank You.

[@kizersousa1155]

How do you know if you have a second gen? Thx for the vid

[@Greyguild]

1st gen have very square headlights, the 3rd and up have an independent front suspension.... everything else is a 2nd ;)

[@johnneumann1080]

1999 to 2004 Grand Cherokee

[@bigsparky8888]

POWER WINDOW REGULATOR IS BEST ON EARTH BECAUSE IT IS A SCISSOR REGULATOR, NOT CABLE!!! WHEEL BEARING GREASE EVERYTHING!!! EVEN THE X IN CROSS ARMS !!! (White lithium is not long lasting!!!)

[@MikeBrownRehobothBeach]

My 1999 has all those problems and more :) Latest issue is a phantom load that drains the battery and a drivers side door key that no longer opens the door. It goes in the hole, will turn left and right, but won't unlock the door. Battery is dead, so key fob won't unlock the door either. Had to figure out how to pop the hood with a long pole, then recharge battery, then could use the key fob to unlock. What a pain.

[@samuelmiranda7476]

coolant leaking from AC hose. Do i have to drain the freon in order to replace hose

[@trishmanahan6937]

I have owned 28 of these Jeep grand cherokees (buy sell trade all the time) I find a lot of issues in the 4.0 heads and the 4.7 valve seats. But great explanation on all the other issues! My 04 currently has the blend door issue that I’m just to lazy to fix 😂😂

[@stephanieseibert9353]

I have a 1999 and it has been setting in weeds for the past 5 yrs, overall setting 11 yrs. How much would you think I'd be looking at to get it restored?

[@clivewilliams9621]

Hi there, how do you do fuel adjustments, richer or poorer...

[@rustione2603]

Our jeep gc 2000 has 126000 miles and it checks out great on everything but stalls out while idling, and while driving. Something to do with the electrical? Was told we need a sensor, but found there are many sensors and don't know which one to start. I'm not mechanical, just want to know what to ask for? If you have any suggestions.

[@kriss1979]

I’m having the same problem with my 2003 Jeep GJ Limited Ed. Just can’t figure it out. It’s frustrating because i need to get to work. Please help

[@masoodahmed2779]

Bro I have jeep cherokee 04 larado. Its steering along with whole car starts bubbling while driving off and on. Can you please give any idea.

[@edgardorojas4693]

I have a 2000 Jeep Grand Cherokee 4.7 Liter Limited. I changed all four oxygen sensors and I still have the same issue. The issue is that sometimes it stalls on me and sometimes when I hit the gas it starts ti jerk and makes a loud noise while I’m pushing on the gas. Once I let go of the gas after a few seconds it goes back to normal and drives ok. However it does it every day while I drive. Sometimes when I turn it on I can hear the idle go up and down and sometimes it shuts down the engine. I thought it was the TPS but after searching on KZbin it doesn’t give me all of the Simpson’s that a vehicle have when it has a bad TPS. Thanks for talking about the top five issues. I know I have a bad blend door on my Jeep. I have to fight with it until it finally blows either cold in summer or hot in winter. I hope to hear from you, thanks, Ed.

[@margaretgarcia8931]

We have a 2001 Jeep Grand Laredo with 153,000 miles on it. It had oil leaks and suspension problems. Five thousand dollars later it is mint except for the power steering hose needing to be change due to slow leak. The only problem is that my niece is afraid of it because it has a high center which scares her because she feels it sways a little. I guess we'll have to lower it now.

[@codyburg3tt]

Got a 1999 grand Cherokee limited 4.7 yesterday it runs great but I was told it will randomly shut off and start back up 15-20 minutes later if you have anything you could suggest that would be great. (I was thinking either something getting hot or a fuel air ratio problem)

[@vickyinskeep]

How can I change the tension pully 04 jeep cherokee when other one melted

[@travisnfunk]

I have a 99 4.7 quadra drive. I have loose steering. I replaced gear box and tie rods last year no resolution. I put a complete 4” lift in with dual steering stabalizer 2 days ago and new tie rods again, of course had alignments both times and still play in my steering. Ball joints are solid and as I said put reman steering gear in last year. Garage that did my alignment say its somewhere between the steering wheel and pitman arm but didnt investigate. What else could it possibly be? Im at a loss

[@1AAuto]

+Travis Funk We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@breewelch5982]

Very accurate. I have a 2002 & my heater doesn’t work. I’m unsure if it’s worth fixing. Where are you guys located?