Turning a $300 Nissan 300ZX into a $30,000 Nissan 300ZX - Part 9 (New Radium Engineering Fuel Cell!)

[@simscoordinator]

This build series is more addictive than any Netflix series. Great work. God bless

[@illwihl]

So true. I do like Gotham Garage, but I wish they spent more time on builds. A lot of shows are meant for larger audiences and it makes them lame.

[@omimorales1272]

Throtl and chill!!!!

[@JayLord8899]

I wish the media guys would take the time to put episodes in order in the playlist folder! It would help keeping track through the episodes so much better

[@evilpenguin219]

hold the hose in hot water next time you need to insert the filler, it makes the clear tube more malleable and then it cools and tightens up

[@jankeesvanwijngaarden]

Yep and no lube required 😂

[@pedromateo2760]

Quinn and Ricky together on projects are a dream team

[@user-ki8zf1rp1e]

That Radium fuel cell install is clean. Those 10.5 gallons are going to go by quick, especially on E85

[@babyboycupid]

18:02 onlymechanics going craaaazy 😭😭😭😭

[@josephmatuszak3855]

For the fuel tank "isolator" I found out cheap door/trunk seals work exceptional as well.

[@TWF05]

I didnt know Rickey was an architect too?! Out here fixing floor plans LOL

[@mefarri]

He also “primered” something 😅

[@onetallassmofo]

Underrated comment! 😂

[@TheGryf0xxx]

They way Quinn says baby.

[@flintTC]

Run the fuel hose’s together like Quinn and Ricky said. It looks cleaner.

[@jesuswasacarpenter]

Agreed, but perhaps remove 1” from the length of the line so it lays a bit more in unison to shape of the fuel hose? I agree with camera man, it’s a tad too long

[@sunnysuravarapu]

this is my favorite build of all time, the 300zx is my child hood dream car, I anxiously wait for every espisode running the fuel tubes parallel looks way better, if there was a nice billet tube clamp/holder than ran them parallel, would like sick lastly when this build is complete I would love to buy everyone lunch and see the car in person. ❤

[@itz-Ender]

I love how much these guys enjoy their job. Keep up the good work, guys!

[@itz-Ender]

@ClickOnMyProfile894 L fake. Get out of here

[@KTBProductions420]

Soft sided velcro. 👌

[@H1g6]

Love the throtl Channel been an OG for the longest wish the best for all of you!❤️

[@enriquefavela3750]

Can’t wait to see how the build turns out and see how it performs.

[@daniels9574]

Vids never disappoint, home from work straight to these bangers

[@GreyGamingGG]

Absolutely hooked on this 300zx build

[@patrickpoteete1588]

Love how this car coming along. Can’t wait for mine to be done.

[@sand450rstar]

trick of the trade for hoses that are tight... use a heat gun and warm up the hose and use isopropyl alcohol and goes right on and the iso evaps, boom done! Works really good with push lock/ instagrip hose.

[@kphillips3694]

Loving the series, can't wait till the engine gets put in and see how it drives. Maybe I can get some ideals for my project.

[@haac4825]

Car is looking Amazing. Always a TOP LINE work. Throtl #1. Always entertaining.

[@kevinhill5531]

Fuel tank rocks and i love that car color

[@kirbythomas8637]

@3:22 ... what's needed is a bit more noise, I think

[@jacoblacroix9024]

Great video! Love the idea with the fuel cell ! Keep up the great videos

[@jcserrano97]

WHats good Throtl, huge fan since I stumbled upon your content. I have a car for you guys to restore next. 2006 Subaru Legacy GT SpecB. Sleeper car. Your grown up STi. Give it a look. You will blow the car community away with that build.

[@elreyk20]

Solidarity in this digital age is very interesting; we(you) are still able too hermit and shine from your comfort zone: Keep going!

[@caos619]

good job all!! clean setup!

[@The559Jeff]

300zx 🔥 🔥 🔥

[@RastaBIasta]

The workmanship is Top Notch!

[@maxgulli9399]

How big is that fuel tank? It seems really small in comparison to the stock size.

[@NCTL05]

That's radium's 10.5 Gal.

[@QuintenDubzQSD]

Fell in love with the 300zx 🥰

[@MGL1997]

love you guys are doing a Z32!

[@matthewryan8364]

On those fuel hoses I would put a butterfly zip tie clamp to ensure the vent doesn’t drop

[@juanriveracaseuno]

easy way to install that clear hose is to dip the end of the hose in hot water for awhile and it will soften it

[@BVLOGS2020]

300 Z looks amzing guys love ur videos

[@jjmturbo]

Heat gun or even hairdryer would help make the rubber house easier to stretch over the filler neck.

[@briannasmits4458]

You guys were the inspiration for me to get into cars and I appreciate what you guys do❤️

[@scribblescratch3011]

That tank looks Fresh in the 300zx

[@ColdK1ller86]

Next time dealing with a hose dont use lube just dip the end in boiling hot water it makes it very pliable and will be a lot easier 😉

[@loperzdolice]

looks amazing good job quin

[@JDM_PLUS]

Moving the gas tank from in front of the rear subframe to behind it. Wonder if that will affect the handling negatively.

[@Journicles]

80th like......got here within 3minutes.... love yall so much.. love from throtl army

[@throtl]

Let’s go!!! Thanks for the support

[@jamesfcookjr]

Throtl VIP squad good morning Quinn Rickie Mickey, Evan, Rick , Victor Shawn Will Nate Tim Big Jeff and the rest of the team awesome custom mounting a radium fuel cell into 300 Z ❤😊👍🏼🤙🏽 🌧️☔️🙂

[@Jdmvagymusclecars]

Los 300 son de mis favoritos !! Saludos desde Yucatán México !

[@kiwidave94]

Just a suggestion for next time. Put the end of the fuel pipe into boiling water until it softens up then after it’s on run it under cold water 👌. Ps watching from New Zealand love the work

[@hinsonian]

omg i want more, the 300 deliverin like SPARTAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA.

[@TheBlackthorn001]

Awesome build. I want to see the finished car.

[@psementalist]

Keep up the good work making awesome KZbin content

[@SB_170]

Always use weld through primer before welding in a piece of sheet metal like that. Those overlaps will rust from the inside out.

[@mickeyandrade3435]

We did.

[@SB_170]

@@mickeyandrade3435 🤦🏼‍♂️I shouldn’t have doubted you guys 😊

[@NCTL05]

Why didn't you use the 14 gallon rectangle tank? Looks like it would have fit well.

[@1234west24]

The way that tank just slid In 😮‍💨

[@robertvaughn7796]

@Throtl. Where would you suggest, for someone that wants to build their vehicle but has limited funds, go to improve the overall look and performance.

[@eugeneabramov5349]

So clean, great series so far! That sheet metal looks thin though, is it not gonna flex under weight when tank is full?

[@jesuswasacarpenter]

That a Festool cordless drill I spied earlier on in the video? Dang! Moving on up! 💎

[@luisarteaga6074]

My favorite series so far 💯 that silicon needed some tape to make them lines crispy though😂👍🏽

[@Randomoffensiveguy2.0]

17:44 haha that’s ideal electrical lube. It’s for pulling wire through conduit 😂

[@dawn9540]

Ricky's homemade tool aka prison shank lol... Love the videos keep it up

[@myspacenrg]

would it be worthwhile to put a bead around the filler neck and then heat up the hose to make it pliable and easier to slip on... then clamp down, accordingly?

[@SandyNickk]

Definitely route the evap on top of the fill… add some bougie zip ties (evenly spaced, of course) and call it a day 🤌🏻

[@gh4978]

great job familiaaa huge love from me and my son anthony

[@victormateo4618]

Is the black car next to the 300zx a convertible mr2 sure looks like it

[@stbralex7187]

Another W throtl vid ❤

[@JohanGavieres]

Do they make that tank for a S13? Looks so flush and clean.

[@timbardam5878]

how many gallons does it take

[@steveafanador6441]

Looks awesome so far 👌👌

[@heathercastaneda3948]

I love this 300zx its my favorite build so far

[@crazykevin4388]

The next time you need to put something into a piece of pipe , heat up the pipe with a lighter or torch and the other piece goes in in nice and easy and then mold to the piece you put in.

[@sumodeluxe]

Love the build. Was a dream car of mine in H.S. Class of 03. Evap looks better up top, sorry Nate xD

[@ASAPerformance]

Yo plasma cutter!!! Cut out for that tank like butter!!!

[@juniorkessler7704]

15:03 what’s with the bleep

[@jdub6909]

Looks sweet!

[@christophersiner8851]

so the surge tank gets filled off of a big gulp straw?

[@shmeat831]

Mini truck please, love yall

[@brianrobinson9979]

If you let the vent tube hang it'll vent better because the fumes will be able to go straight up instead of going up and then flat. IMO

[@michaelbrinks8089]

I'd loosely zip tie em together so vent hose isn't flopping around.

[@victorpleitez7713]

Nice! size and Brand of the wheels

[@Jusdin057]

Nate the hose is to long mate, it needed to have some taken off for sure, but you can't have it dropped down either.

[@dadstro]

Nate is the goat

[@timcaldwell8154]

Did you bolt straight through? Looks like you didn’t use the brackets or I missed that part….

[@mavricxx]

Dude this tank looks so small. What capacity is it? 10-12 gal? Geez, you're going to be refueling every 3 days!😂

[@gurgleh]

i think it is 10.5 gallon

[@JBM_Autodipz]

more awesome progress guys

[@danielpaauwe6359]

How many litres is that thank? It seems so small

[@Grindcorepsychs]

Hope yall are staying safe out there in SD i know its underwater right now

[@BirdehTko]

Would a 2nd hand fuel tank not be cheaper then this radium setup? Looks like a expensive bit of kit.

[@vortikomp6627]

This is the best Nissan car ever 🇯🇵 👑👑👑👑

[@RidiculousGabe]

thats literally my dream car

[@NottiOne]

Ricky, make them get u a bead roller brother, give some stability to that sheet.

[@throtl]

We have one. A bead roll on this piece wasn't necessary.

[@NottiOne]

@@throtl 4 inches of flat sheet with 80 lbs of fuel and 20 lb fuel cell, high rpm drone from flex us a real possibility. Harmonics are a bitch, I deal with electronics, harmonics are a bit of a speciality.

[@GSMMW]

Nice job

[@H3LLR4ISR]

loved it. I always use a cigarette lighter messing around with hoses like that

[@srslideshop2376]

Next time just heat up the ends of the vinyl , rubber or silicone hoses to be more flexible to fit easily without suffering 😂

[@josephvazquez1338]

I would of zip tie the last two hoses and call it a win 😅 but I'm nobody you guys rock bro

[@mickeyandrade3435]

They will get fastened.

[@JayGjr]

where do you guys find cheap cars like this, ive been looking for a car for a while but they are all relatively expensive

[@Austin152-S]

You guys should have done a VG30 TT Engine. They aren't that complex anymore and can be simplified and reliable. The SR will run out of steam quick and doesn't match the weight of the car IMO. RB or 2J would be sick. VR6 would be epic. Like the SR but better.

[@michaelcuevas3259]

Vk50 tuned and N/A woulda been killer.

[@kenne9566]

Sooo you’re putting a TT VG after the SR??? 😅😅

[@mannydiz291]

Are you guys working on a f355 berlinetta ?

[@alisterbacon3157]

Looks like you guys have never made bong before 😂 put the hose in hot water next time round and it will slide right on ✌️

[@michaelbrinks8089]

Beautiful car.......Any verdict on the rear wing??

[@mickeyandrade3435]

It's out.

[@tilenS-u6x]

Love the Chanel

[@DecanFrost]

sometimes i wonder if these companies future proof their names. what if we actually got Radium, as in radioactive metal fuel tanks someday. 🤣

[@northside0nation]

where do you get your numbers from?this car with the upgrades is only worth $5000 max

[@shawnbillups76]

When are you going to do some mods on the BMW