Casting a Bag of Water in HOT! Resin - What Will Happen?

[@BensWorx]

Thanks for stopping by, If you have time you can check out my new range of Eggs here www.etsy.com/shop/bensworx

[@jtwolph7903]

You should try using a high heat resistant sous vide bag that won't melt so easy.

[@kscollins73]

#3

[@robertc49]

#3

[@ghazaleh1567]

Try bag of red resin next time please

[@edwardbyard2217]

If your trying to get the water to fully boil there is a calculator that will tell the temp it needs to get to under pressure in the pot, because as the pressure goes up so does the boiling temperature for the water.

[@theogmrbill1]

Let’s do paint ball’s in resin video, Let’s make this happen!

[@THEAPRILFOOL-1983]

That's an idea actually get behind 100% let's do it

[@AithwenQuinn]

Yes!!!!

[@stephanievivier290]

That'll be awesome!

[@THEAPRILFOOL-1983]

@@stephanievivier290 thanks

[@THEAPRILFOOL-1983]

@@AithwenQuinn I would also love to see what happens to heartburn tablets that you drop in the water and then drink I would love to see what would happen if you drop those down in resin

[@jasonodell608]

#2 was pretty cool. Seeing how that plastic reacts, I wonder what would happen if you used shrink tubing or shrinky dinks.

[@stephanievivier290]

Brilliant idea

[@DrKikiV]

I would love to see Shrinky Dinks...

[@KhalidahTiaret]

Shrinky dinks is a great idea! I'd love to see that.

[@Corkies-1985]

Ooh that's a cool idea!!

[@thenemosix6835]

Because the bags melt it would be cool if you got different color bags and put them inside of each other then see what they turn into. Seems like it would be cool. Awesome video!

[@BensWorx]

Thankyou, yeah that would be cool

[@natasja1977]

This would be so cool to watch

[@pauloreyfigueiredo]

that i would like to see

[@boeubanks7507]

Suggestion - Coat and cure orbreeze pieces in UV resin to give then a hard shell. Then cast them in resin the same way you did here. That will be interesting.

[@Faesharlyn]

Yep, I suggested this last time... seconding it this time!

[@cdey8512]

I had the same thought! I wonder how you could since they are so slippery.

[@boeubanks7507]

@@cdey8512 You would probably have to just put a blob of epoxy down and roll them in it to coat. Then set them on top of a UV light to cure.

[@GamerWolvenna]

#2 is my favorite! I was sorta hoping you were going to put water into the bag with the orbeez too! I think it'd be cool to see some combination of orbeez and colored water turned into a lamp. Since they won't shrivel up you might get some really interesting effects!

[@bensimms7294]

If you have a heat sealer - like what you use for sealing food - that could give you a absolutely perfect weld seal that will stand up to more pressure than the zip style ones. I bet that would look good.

[@nomadiavan6560]

The melting of the bag of the third one was so cool. Do you have colored plastics that would melt in the resin?

[@RebekkaRN1962]

Cool 😎 pressure pot footage. I think I enjoyed them in the order they were done...1, 2, 3 👍🏻 Btb honest & truly answer your question....#2 is my fav.

[@YourOldUncleNoongah]

Im about to enjoy this video with an iced coffee, some GIANT choc chip/M&M cookies fresh outta the oven and a warm Saturday (Christmas Eve) All the best to You Ben and Family. A Very MERRY CHRISTMAS and a Happy and Healthy New Year to Everyone. Be safe out there folks!

[@BensWorx]

You’re making me hungry 😂, Merry Christmas mate

[@YourOldUncleNoongah]

@@BensWorx I wonder how a bag filled with water, inside an empty bag, inside another empty bag,& all SEALED along the opening with UV resin would go?

[@Anxiety_Creature]

They were all cool, but my favorite is number 3. It does look like a little bag of candies, and the bag melting was really cool to watch.

[@ctempleman1401]

I agree especially when the bag is twisted at the top.

[@wildstorm3486]

I’m partial to #3 myself. But #2 was great as well. I just wanted to say thank you for the awesome videos this year Ben. Always look forward to what ever crazy/fun idea you come up with. Either on your own or the crazy/fun ideas of your subscribers. I don’t know if you have another video planed for this year or not. But either way I wish you a happy holidays.

[@BillDerr]

I don't know if it would boil. You run it at about 45psi. At that pressure, it would increase the boiling point of the water. It'd boil at about 285°F or near 140°C. But if you release the pressure when it's still really hot, it would flash boil into steam and likely crack the epoxy like we've seen it do in past videos.

[@TheSassy]

Merry Christmas/ Happy Holidays Ben and Nicole!! Hope you have a wonderful day with your Fam 🎄🎄🎁🎁🎉🎉🎉🎄🎄💛💛 Freaking fantastic pot cam footage!!! I can't believe the second one actually had some water left, looks cool as heck. Would make a good snow globe. Also love watching the bags melt away. The first one i thought was about to exploded and was making the pot rock like mad, then my brain kicked in and figured it was you undoing the top 🤦‍♀️ Have you ever made a magic 8 ball? I'd love to see how you'd do it! Ooo have you thought about trying oil?? Thanks Ben 👍

[@BensWorx]

Thanks Sas, You too! yeah the pot cam was so cool, I think an 8 ball would be awesome to make and oil is definitely on the list. Thankyou for all your support throughout the year I really appreciate it! 😊

[@engelavdod18]

These are so cool! I love that you have a camera inside the pressure pot so we can see what happens in there. It's super interesting! Definitely the last one was my favourite, and the bag itself once it collapses inside the resin just looks awesome! Kind of looks like the little goldfish bags from the seaside, where you'd have a little goldfish in water, that might be interesting to cast like this with a little toy goldfish in the water in the bag?

[@susandaniels9733]

I really enjoy the bag series and they are all interesting, but I think the latest orb one is my favorite.. thanks for sharing this video.

[@BensWorx]

Thanks Susan

[@ScratchyPots]

Thanks! Merry Christmas Ben.

[@BensWorx]

Thankyou Stephen, you too! I really appreciate your support 😊

[@alisonmary1443]

Awesome, all three are great but the most entertaining in the pot was 2, loved this 👍 Peaceful Christmas to Ben Family 🐾 and all ✨✨

[@BensWorx]

Thanks Alison, you too!

[@aztigerval1979]

They all look super neat. I love the different shapes that created when the bags shrunk and melted. Kind of makes me wonder what would happen if you did something with oil and colored water. The separation might be a cool effect.

[@Rookie_Rockounding]

Very cool mate! Love it! My fav is the end result of the Orbies! So cool lookin!

[@cherryshrimp2359]

They all were rather cool to watch. Hope you have more little projects for 2023. Wishing you and your family a Merry Christmas.🌲

[@trumpetbob15]

At 9:20, that music cue syncing up was awesome! Interesting experiment; love seeing these.

[@themorrislessgroup]

So wholesome and fun! Like just such a positive guy .

[@Hannahward6143]

I cant choose a favorite. Each has their own awesome quality. There is something satisfying about the orbees that lose and recapture the water endlessly.

[@LisaVornhagen]

That was really cool! All three were awesome, but I this the second one was the best. I love the dramatic music you had playing!

[@BensWorx]

Thanks Lisa

[@lizziefishwick6249]

Thanks

[@BensWorx]

Thanks Lizzie, I really appreciate it! 😊

[@lindahobbs5545]

I liked #3 as far as looks go. I thought #2 had the best action in the pressure pot. Merry Christmas to you and yours Ben!

[@BensWorx]

Thanks Linda, you too! 😊

[@karengilchrist9774]

That was fascinating. Love potcam.

[@williamellis8993]

Interesting, Ben. I think number 2 is my favorite because of the way it steamed when you released the pressure. Bill

[@samanthadean1083]

My faves were #2 and #3!!! Hope you have a merry Christmas Ben!!! ❤️❤️🎄🎄👍🏻👍🏻

[@mikkohernborg5291]

Might be an idea to glue the bag's opening downwards. Not that it seems to make much difference which way it is oriented really, as often the bubbles are on the side away from it, just above the base layer (guessing the resin hardens from the top, so it’s the easiest way to escape). But it would complete the sideways orientation series, and laying it flat would round it out. That is, if you decide to do more of these.

[@sdhproductions8877]

I like them all. The third one with the orbeez would make a great lamp.

[@victoriaeads6126]

Merry Christmas! I like the shapes of the voids in the first two. I am also REALLY looking forward to seeing those dragon eggs in person!!!

[@jaspergoesrawrr]

This is so cooool! I love how the water bags exploded with a jet of steam

[@spencerkatty]

#3 was my favorite, followed closely by #2 I wonder if you could do a slower process of adding layer by layer of resin to a bag (just dip it in as you do other experiments). That way it wouldn't have the issue of melting the bag so catastrophically.

[@jenniferwestphal-leath7866]

#2 was my favorite! All of your experiments are so cool!

[@mel.e2675]

2 was my favorite, though all were very cool to watch!

[@NeonDreams7]

Very cool results! I like the 3rd one. Thanks for sharing!

[@BensWorx]

Thankyou

[@osd-syrup]

Paused when you asked for our guesses. I have a feeling the top of the bag will melt and release the water into the resin possibly with a stream of bubbles. If that is the case I would like to see you do something similar but with glitter in the water or perhaps some glow in the dark pigment mixed into the water. Thank you for the great videos!

[@staceyritchie7100]

I liked them all but the design in the orbeez one was awesome! Can't wait to see what you come up with next!

[@Trudy.Villain]

Thank you Ben, your videos always brighten my day. Merry Christmas

[@BensWorx]

Thanks Trudy, you too!

[@phoebedavies4383]

Number 3 is my favourite but they all have their own interesting bits, thanks for your very enjoyable and informative videos. May you and your have a happy Christmas and a 2023 filled with good content and healthy fun ☺️

[@BensWorx]

Thanks Phoebe, you too! 😊

[@BensWorx]

Thanks Phoebe, you too! 😊

[@lilpixie25]

1 was my favorite, it looks rly nice! I can see a lamp with that fracture design

[@xmas4203]

The abstract statue number 3 made with the orbis is really cool.

[@der_kluger_gunther8391]

the potcam this time was so "bagexplosive"! i love all of them but i think i'll go with the third one, the effect of the explosion was just so cool. oh and merry christmas and, hopefully, a good new year!

[@heidiproctor5503]

The last one was super cool, my favorite one

[@Deekm69]

Lol! The last thing you want is your "Ball's" shrinking! Great stuff Ben 👏 👍

[@RobBoyBlunder]

I love how cute the bag of orbeez one turned out too! I have to wonder, would a cured shell of UV resin with water inside it survive something like this? Idk how feasible that would be but I just like seeing what fun stuff you come up with!

[@sikksotoo]

I liked the second the best, but Orbeez are always fun. Merry Christmas Ben!

[@vicky3791]

Love number 3 and the shape of the bag it left after curing

[@LeeLee86]

#2 was my favorite!! It was the first one that went into the pot. I just like how the bag melted and made it look like ripples! ❤

[@avinashramroop1817]

You didn't disappoint, all 3 were great but i liked the 2nd one. Cheers and Merry Christmas to you and your family Ben!!!

[@BensWorx]

Thankyou, you too!

[@avinashramroop1817]

@@BensWorx Cheers 🍻

[@ameliasachs6704]

Merry xmas to you and your family, Ben! And all the best for 2023

[@karacoop]

Fun experiment! I liked watching the process #1 went through when it fractured 😊

[@bettypaquette1904]

I liked all three. Different outcomes.

[@bethcaselman7952]

They all look awesome I really like all three of them they turned out awesome and very interesting

[@chancesimpson6545]

When you did the one with the orbees it looked like it could provide a nice little Christmas tree witch would look cool as an egg or a tree in a bottle

[@pirai_nudhal]

Ben,wondering about filling a bag of water and then putting it inside another larger empty bag and then cure it? Will the air and water can be traped this way? curious!

[@TheAruruu]

Suggestion: Get a small beaker or jar, and a smaller bottle. Pour some resin into the jar, then use the bottle to displace the resin to create a chamber in the center. Pressure pot that, allow it to fully cure. Create a base in a mold, much like you did here. Add some dyed water into the resin 'cup', put a solid ring of UV resin on the lip of the cup, then adhere the cup to the base in the mold. Now fill the rest of the mold with resin. The cup should disappear, and give you a nice crystal clear cylinder of water in the middle. tl;dr: make a vial from resin, UV resin glue it to a base with some dyed water in it, then fill with resin like normal.

[@SylviaRustyFae]

3 is def the best lookin one to me. The effect it got worked out perfect

[@ConnieConnie824]

That was Awesome! Best pot cam yet 🔥

[@julietteneylon4243]

Merry christmas ben to you and yours. Looking foward to more vids in the new year

[@spokehedz]

A bag of air, inside a bag of water, inside a bag, in the resin. Like a turducken! Happy Christmas and new years!

[@kendramanuel1276]

Oh wow Ben. Each one was different. All are very cool! 👍🙏🎄

[@I-Am-Blue]

Always find your voice and videos so relaxing, someone i could totally chill out with on a fishing trip maybe double or triple bag the water, and allow water to cool to room temature saw someone put a Enclosed Ecosystem Shrimps Bottle in resin.. heat killed them

[@Jakekingwoodworking]

Ok so it looks like the bag is melting in the resin so if you could use a different material, more specifically one with a higher melting point you might get a better result. Does uv resin get as hot as the normal resin? Could you coat the bag with uv resin before putting it in the other resin?

[@sarahkwast1250]

I loved them all. They each tell a different story. 😊👍

[@Tim-57]

Hey Ben They were all cool, perhaps the orbs is my favourite. I wonder if you preheat the water before bagging it, it would be quicker to boil? Happy New Year to you and yours 🎉 Thanks for another entertaining year of videos and as always, take care.

[@TheConwoman3]

I liked all 3. The orbeez was cool. I think putting the bag upright was a cool idea. You guys have a great holiday!! Can't wait to see what you come up with next year!💖💖💖🎅🎄

[@BensWorx]

Thanks Connie, you too! 😊

[@i5will_games]

Loved all 3! First two made me think of the ice walls in GoT. Would look awesome with a white walker in front of it.

[@BensWorx]

Thanks Julie-Ann 😊

[@LordRae]

3 was my favorite. Good stuff. Thanks for the video.

[@jbprospector3638]

That was so cool 👍 again you always put a smile on my face. Happy Holidays 🎄

[@BensWorx]

Thanks Mate, you too!

[@rendragydna]

the change in pressure would likely change the boiling point of the water it would be interesting to see the difference with no pressure pot

[@THEAPRILFOOL-1983]

I took makeup mix it in with olive oil and wished I was doing experiments like this I would love to see how the olive oil would react to the heat with the makeup or pigment inside resin but this video turned out really great keep up the good work

[@trishharmon46]

The while thing was cool but number was definitely cooler looking. Thank Ben for Sharing

[@Melanbrocolli]

All of them, Merry Xmas Ben and Mrs Worx 💗

[@photofreeamerica6036]

Ben thank you for another video. I was thinking what happens if you put resin in the bag instead of water.

[@davidskelton7960]

Have a great Christmas and a happy new year Ben

[@BensWorx]

Thanks David, you too!

[@deynaweatherly4331]

You should try bag within bag within bag with the colored water being in the innermost bag and see if it's still fractures and what happens if you put a Ziploc into a ziplock into a ziplock

[@konoikurozora5851]

Second one was the most interesting to watch in pot-cam, but I really like the final result of the third one!

[@aicirtkciub9167]

All three. They are all different and nice. Merry Christmas Ben and family 👪

[@rodgerbagwell7643]

I like all 3 experiments. All turned out the exact opposite of what I expected

[@BensWorx]

Thanks Rodger

[@randyeller8139]

Just had the internet come up after a big cold blast from Canada put our thermometers into negative news numbers and it was well worth the wait! Almost makes me wonder if you could lightly dye the resin brown and the water red and get a volcano effect. Fun experiment and Merry Christmas from North Carolina, U.S.!

[@timalbertson4004]

Merry Christmas to you and your family 👪.

[@BensWorx]

Thanks Tim, you too!

[@charlesbarnes6912]

Happy holidays Mr Ben and family

[@BensWorx]

Thanks Charles

[@geoffwarnes9327]

Loved the effects of #3 Have a great Xmas to u and your family 🎅❤️

[@zigzagdevildog]

Ever considered a glazing method? Like put thin layers of resin around the bag one by one until its good and sturdy before doing the full casing?

[@hantieferreira4398]

Interesting experiment. Nr 3 is my favorite by far!

[@_citarra_]

Awesome. What if you reinforced all the bag edges including the top with clear tape?

[@ctempleman1401]

Who's not going to love an explosion? Great little experiment. What if you tape around four sides of the bag with a very clear strong tape? I love other people's suggestions of coating the small bags in resin before it is put into the main resin. Or putting a resin in the little bags. Merry Christmas to you and your family.

[@hollypierce3076]

I like number 2 & 3 equally! Merry Christmas to you and yours!!

[@RatyTang]

You should cast the resin bottles, use them as a display as they are what made this channel grow

[@Zoso14892]

Those results were really interesting to watch, but my favourite bit of the video was watching you seal the second bag sarcastically slowly for the camera 😂

[@grekit]

What would happen if you filled the bag with colored resin instead of water? Would it ooze out into the rest of the clear resin in neat shapes? Would it blend together? Might be cool to find out.

[@littlehelper4596]

My son and I like #3 the best. Cool video! Thank you for making these fun videos!

[@candymatek3]

Leaves a really cool shape

[@praisegod4538]

I liked all of them. Watched the pot cam twice on each, in case I missed something!

[@BacktheBlue60]

I like 3 the best. I never wanted the video to end. You could keep conducting experiments and I would not get bored.

[@evanvevan]

Alka seltzer tablets in resin? Will it fizz?

[@GrandmaLoves2Scuba]

Wow! The potcam was so cool this time!