Turning Square Stock with a Three Jaw Chuck!!

[@wojciechjanecki9221]

excellent and simple advice.

[@Tomc8030]

Thank you. I’m a diy guy and have a small 4” lathe with 3 jaw and need to end drill and tap some 3/8” aluminum sq. stock and I believe you’ve saved me some money with this ideal.

[@ypaulbrown]

fantastic idea, thank you so much, cheers from Florida ...PB

[@deviprasad981]

Excellent

[@fxpestoperator5527]

Amazing Brotha!!!! Thanks for this idea!

[@industrialperson1434]

My channel best support

[@DIYTinkerer]

Thanks just what I was looking for 🙂

[@cloudbase3515]

Great idea. 👍

[@duron700r]

Just saw this. Super simple idea!

[@andreykush]

Awesome!

[@ravindersingh-es1sj]

Dear thanks for this brilliant idea .I m from India

[@Theaustrianpainter88]

I dig it, thanks

[@pabloestafez6830]

Who's burying collets adapted to hold Square stock for you to dig?😅😂

[@userwl2850]

This is the best way. 👍

[@industrialperson1434]

My channel is best

[@Thomas_Deering_King]

Pretty clever.

[@industrialperson1434]

My channel is best

[@leichen5474]

请问这个开口套 加持力会不会比较小 从而导致工件往后移动 ？

[@industrialperson1434]

My channel is best

[@BTUvsCAL]

smart way to do!

[@therussianmachinists2409]

Emery Board just a trick my father taught me. hope you can put this idea to use as well :)

[@industrialperson1434]

My channel is best.

[@BTUvsCAL]

@@industrialperson1434 hmm

[@industrialperson1434]

Support

[@marcocavazos9641]

call me stupid but if you are just gonna turn it into a radius why not just get round bar? also is that sleeve stainless or aluminum?

[@therussianmachinists2409]

I think the answer is quite simple. Lots of plate material can only be bought as plate. Well, or it really hard to find in circular form. I think these square pieces in particular were cut from plate and we just had to turn them to make them circular :)

[@pabloestafez6830]

If your looking for unusual compositions of metal stock sometimes you gotta take what they got and work with it....the initial interrupted cut must of been hard on the inserts tho being stainless

[@umeshgowda8857]

What's the Thicknesses of the slot?

[@therussianmachinists2409]

About 1.5 mm. Thickness of a saw blade

[@industrialperson1434]

My channel is best.

[@industrialperson1434]

My channel is best video

[@pabloestafez6830]

​​@@industrialperson1434fukk off with your begging for viewers in every comment....if your channel is so good it will speak for itself and be trending and people will be recommending you to others...all I see is you begging for views in another man's comments section....deeick head!

[@TPMNgasem]

ide yang bagus ... cerdas

[@therussianmachinists2409]

Terima kasih

[@TPMNgasem]

@@therussianmachinists2409 hehehe ternyata bisa bahasa indonesia juga

[@therussianmachinists2409]

@@TPMNgasem bukan saya, tetapi teman saya bisa Google 👍

[@TPMNgasem]

@@therussianmachinists2409 hahaha oh iya

[@hussainbagdadi]

Why have you done rounding in the bore, you could have done square slotting, I am getting better results with square slot.

[@therussianmachinists2409]

Mohammed Hussain Bagdadi hey! I can't open your url for some reason. Do you mean slots that look like keyways? I've never thought about that. These squares are different from eachother. Some are wider and some not. I'm not sure how square slots will hold concentrisity with changing dimensions. What do you think? Jimmy

[@hussainbagdadi]

the russian machinists yes keyway

[@hussainbagdadi]

www.dropbox.com/s/5nev8lefcejs2i4/20180104_090553.jpg?dl=0

[@ahadpirani1140]

Ok

[@industrialperson1434]

My channel is best video

[@industrialperson1434]

No 4jaw chuck best