tusk motorcycle wheel balancing stand

The tusk motorcycle wheel balancing and truing stand is a moderately priced solution to the time and cost of taking your wheels to your local bike shop to be mounted and balanced. ...well more specifically, for the second half of that job.
I will cover an affordable tire change stand in my next video and round out everything you need to swap tires in the comfort of your own shop in minutes instead of days.
The tusk motorcycle wheel balancing and truing stand is highly effective right out of the box, but like all aftermarket tools and accessories there is always a couple small modification that I will suggest to make it even better.
This Stand is available at following link:
www.rockymountainatvmc.com/pa...
The 8x24x8mm open bearing used in this video can be found here: amzn.to/40wgcvC
Similar stands are available at these links:
amzn.to/3sl7iCg
www.revzilla.com/motorcycle/b...
I hope this was helpful, I'm always delighted to get your questions comments and feedback.
Remember you can also find me at dualsportgarage.com/
Thanks for watching!
Note: I received no free product and I was not paid to make this video. This channel is subsidized in part by small commissions paid on some, not all, product links. And as an Amazon Associate, I earn from qualifying purchases. So it is helpful and very much appreciated when you use these links to support this channel.

[@dagaines152]

The order should be bolt, washer, bearing, washer. Then on the other side, lock washer, nut. The center of the bearing is lightly raised so even though the washer is slightly larger, it doesn't impede the bearing rotation. Using the bolt alone without a washer underneath will cause drag.

[@thebarbertoddbarbershop5253]

Wow. Just what I was looking for. Great video!!

[@dualsportgarage]

Sweet, thanks for sharing!

[@teeztoyz]

I'm kinda picky like you about bearings. I just put my stand together with high quality ABEC 11 skateboard bearings, they're close to the same dimensions. 8×22×7 vs 8×24×8 - they work great and the ones I ordered came with the washers that prevent any rubbing. A set of 8 cost $25 but these spin for days- really good.

[@dualsportgarage]

Great tip…thanks for sharing!

[@joshuawatkins3253]

so if i'm reading those links right, seems like the amazon one is the exact same stand for less $ minus the tusk sticker. I can just throw one of my million tusk stickers that they already sent me with the many purchases i've made from RM on the amazon stand. Great video! thanks!

[@dualsportgarage]

Glad to hear it!

[@ScottMiller-tu3gg]

Do you have a part number or size of the replacement bearings?

[@dualsportgarage]

Of course...I have added it to the video description...but here is a link to the actual 8x 24x8mm bearing in the video...amzn.to/3lF1Xps ...thanks!

[@ScottMiller-tu3gg]

@@dualsportgarage Thank you!

[@garyhemmer8430]

what is the number on the replacement bearing??

[@dualsportgarage]

This is what is printed on the bearing 728C/P5 8x24x8. Here is the link to the actual bearing I used amzn.to/40wgcvC

[@garyhemmer8430]

@@dualsportgarage thank you!!