Tutorial - Front End Removal & Refitting For M4 CQB-R Next Gen Recoil Shock

[@sebusm5409]

My barrel was moving a little from right to left, I was able to completely dismantle the front part around the barrel, and after cleaning and reassembly, there's no more small movement ! Thank you for your help.

[@rhylandyokoya7964]

What is that little parts 2:09 ? How to it insert back?

[@charmpack156]

Question are all the front upper receiver threads the same size or dose it depend on the model?

[@Eagle6Airsoft]

All the m4 are the same

[@gabrielho1577]

Sir my gun doesn’t have the screw to unscrew the handguard, otherwise it looks the same, how to remove it?

[@xcumulusx]

is it poisible to remove the front sight , and change the handguard ?

[@callmedoc2147]

The handguard is generally retained with the front sight and the delta ring. No change is needed for Magpul MOE or standard clamshell handguards. You need to swap out the delta ring and nut for most free floating handguards

[@Jr-eu9ex]

can you change out the front iron sights?

[@zackgilbert5082]

Hey! What rail system/ length is this? I bought one that's too long and wanted to buy the right one! Thank you!

[@rhysrigley4594]

PLEASE CAN SOMEONE ANSWER THIS.. Do you take the choke of and put a tracer straight in its place.??????? 😶. I'm struggling with finding videos on barrels and tracers????

[@dirtydogdazza]

firstly its a flash hider not a choke, and the answer to your main question is 'yes and no'...its dependant on the tracer you buy. some tracers will come with a flash hider that fits it. Most just screw onto the outer barrel end.

[@cubefied6255]

If you don’t destroy it you can put it back on but if you do wreck it a tracer with 14mm threads will work

[@MiiGZz12]

Sir I have the same M4 I wanna upgrade it can you give me a suggestions? what to change using the best parts so I can have the best performance of it? Pls.

[@TequillaJack]

Eagle6 is it possible to front wire a CQBr?

[@dirtydogdazza]

yes

[@D-sandman-V]

What was the screw driller that u used for the 1.5 grub screw called

[@sriyatiksriyatik4515]

E&C?

[@koke1121]

Donde puedo conseguir el cañón externo cqbr-r de Marui?

[@enes134]

Thank you...nice video.

[@exodus2oo]

Hey Eagle6 I have a M4 CQBR and when I got it the RIS was wobbling and from 1 of your videos I figured the screws were not on tight enough. I have bought a LVOA rail for it and when the techs tighten the bit that was suppose to secure the outer barrel which was the cause of the wobble, it is now at an angle of maybe slightly off 90 degrees. Any idea why this would be?

[@Eagle6Airsoft]

Installing a custom free float rail usually has 6 screws at the base holding it on. You can over tighten screws on one side which will pull the rail to one side. Sort of why they say you should tighten the corners when fitting the nuts on a wheel on a car. So either slacken one side or tighten the other.

[@exodus2oo]

Eagle6Airsoft Are you saying that my rail is the one that is slanted? Because even if I drop it in w/o tightening the outer barrel looks slanted. By base did you mean the barrel nut? There's no screws on the nut it self but there are 2 screws holding the LVOA rail to that nut.

[@Eagle6Airsoft]

+exodus2oo righty I've just googled the rail it looks like it threads on directly to the upper. So your going to have no adjustment off the rail. Let's assume that's straight. So are you using the original outer and ngm4-9 and ngm4-8 still ? If so the only thing dictating it's straightness will be ngm4-9 so you could try replacing that with a harder version Ie the Laylax one.

[@exodus2oo]

Yes I am still using the original parts for those. The ngm 4-9 is the silver "U" shaped nut correct? I assume 6 sells them.

[@exodus2oo]

eagle6.co.uk/shop/catalog/product/view/id/247/s/laylax-hard-barrel-base-for-m4-next-generation-recoil-shock-series/ is this it?

[@the3dpenguy613]

2:53 he says “rizz”

[@joshuarooney8614]

I NEED HELP, can you do a dissasembly vid for the socom verso the black Wires in the battery area for the barrel are disconected and I don't know how to put them back because I was cleaning Clay in the received after a match and I fucked it

[@Eagle6Airsoft]

They only plug back in a certain way. You can see the picture in the manual last page

[@joshuarooney8614]

@@Eagle6Airsoft its fine now, I didn't know you can open the fuse box, because the hole for the fuse was too small, still confused how it happened