Tutorial on how to use Mazda SkyActiv OBD-II calc (FORScan) Excel file

Link to the file: tiny.cc/MazdaAsBuiltEditor
Mazda3Revolution profile: www.mazda3revolution.com/memb...
єДрайв profile: e-drive.com.ua/@SergSlim/2405

[@mazdatipsweetjes7888]

Hi SergSlim, I just wanted to say thanks!!! Due to your effort we have been able to help a lot of members of our Dutch Mazda Facebook group "Mazda Tips en Weetjes" with activating extra features on their cars. Unbelievable how much time you spend making (and updating) the Excel file. Love your work 👌

[@TheSergSlim]

I'm glad it is useful. Have fun with your cars ;)

[@mazdatipsweetjes7888]

@@TheSergSlim did you get the sponsoring I send you?

[@TheSergSlim]

@@mazdatipsweetjes7888 yeah, got it. Thank you very much! I appreciate it a lot :)

[@SerhiiOkun]

Wow, mega cool video. Many THANKS for the great job and clear explanation!

[@hroland]

omg incredibly helpful video, thank you!!!

[@nimav82]

this is amazing thank you

[@aytacdede81]

Dear sir many thanks for your excel file. it is great job. I used it to activate door lock system on Mazda CX-5 KE version. Now I was trying to activate rear fog light. Also I bought new switch with rear fog light control and i changed values using forscan on rbcm module but i didn't understand changes about ic module for activate it. if it is possible to help me with this thanks so much

[@danijelivezic1485]

Hello! Thank you for this video man! I have 3 questions, if you can help me. 1. Can be activated function that when you turn off your car, that radio don’t and play ahead? Radio (or MZD) turn off only when your car is turned off and you open driver door. 2. Can be activated more than just 3x turn signal on touch? I saw on Ford cars with Forescan can make to change to 4x, 5x, 6x and 7x turn signal. 3. Can i somehow activate navigation voice instructions to all speakers, because on default is set only to drivers front speaker. Or maybe even better - can voice guidance volume go up automaticly when i turn up volume of music? Because now when i turn up volume for music, i cannot hear voice instructions of navigation - she rest in low volume and i must turn shes vouces up and down everytime. Thank you :)

[@smoke05s]

Thank you for the great video. I have a 2023 CX-5 Signature. I would like to change my DRL so just the surround LED's come on (without the low beam) I have Forscan and the auto switch ELM327 and can successfully connect to my car. But now I need to figure out what module and string to modify. WIll the excel spread sheet help me?

[@TheSergSlim]

If you find a car with that function working from factory as you want it to work on your car, then you can compare their configurations and find the different bits and try them on your car using the file.

[@CJL999]

Thanks for all your works! I have a quick and noob question pls. What if I wanted to disable i-stop, should I change all the blocks of it inside every related modules correct?

[@TheSergSlim]

Probably yes. Can't tell you definitely, because I don't have i-stop and never tested any of those options in my car. You should better ask around on Mazda 3 Revolution forums.

[@phisonspo]

thanks bro so much!

[@hroland]

Hi Serg! Thank you again for the video. I drive a 2023 CX-5 and I'm trying to build something DIY that requires me to detect the MRCC engaging/disengaging in real time. I got an Arduino and a CAN BUS shield, and i can monitor the speedometer in real time! I also got an MS/HSCAN scanner USB for ForSCAN. Any idea how i can get the right PIDs for this? So i can monitor it? How could I use your excel file to help? Im kinda new to this :) Thanks in advance!

[@TheSergSlim]

Excel won't help you, probably. Get yourself FORScan and check PIDs. Maybe you can get some info out of it

[@MrMob46x]

Thank you for your hard work. Any plans for Mazda CX-50 compatibility..?

[@TheSergSlim]

If it's already not compatible - then highly unlikely.

[@blueranger3123]

i want to turn it off i-eloop i-Stop Permanent version of Mazda2 From Thailand, I had to go in and set that up at that point.

[@wkl3968]

incredible!!! can we write can bus message into the system like trigger the AC button?

[@TheSergSlim]

For that you better learn which PIDs exist, and try to use them in FORScan. You definitely can't do that with the Excel file.

[@nathanjones6629]

Hi, do you know of any way to set the EPB on a late 2016 (current release) Mazda 6 to auto engage when switching the ignition off? It seems this is standard on new models, such as the CX-30, but not on the Mazda 6. My other car has this and its notably missing on the Mazda 6. TIA

[@TheSergSlim]

Hey. No, I don't.

[@patb3982]

Hello SergSlimMazda, How to change L/100km to Km/L? Thanks.

[@m.j.delange8659]

Hello SergSlim, Thanks for the fantastic Excel-sheets! I have enabled the "Coming Home" and the "Auto Door Lock" module on my Mazda 6 2014. TIP: The Auto Lock function was not working, till I changed the 7B7-01-02 B4, b3 into 0 instead of 1. Now my screen shows the menu item. QUESTION: The Leaving Home will not work on my Mazda, is it possible to make this work?

[@TheSergSlim]

Hello. Leaving Home probably won't work because your RBCM doesn't know about this function.

[@danijelivezic1485]

Hello. Dod you figured out how to enable Leaving home on your Mazda? :)

[@kkjohn2136]

Hello Serg, thanks for your great work. I definitely would try to enable auto door lock and smart city brake. Do you know if it is possible to change the digital display speed value from metric to imperial for a Mazda 3 2018, ie. the value from km/h to m/h. Thanks a lot.

[@TheSergSlim]

Kmph to mph should be possible to change in the CMU settings.

[@kkjohn2136]

@@TheSergSlim , thanks. But I wonder if the CMU only alter the Mazda infotainment system but not the digital speedometer display in the Head Cluster?

[@TheSergSlim]

@@kkjohn2136 no, it alters the Instrument Cluster. There's no MPH or KMPH in the CMU itself, so there's nothing to change there. The setting in CMU changes Speedometer, Odometer and Average Speed.

[@russmeachamruss]

Hi, thank you so so much for all this information. One question - is it possible to turn off the beeping if the drivers door is open - if I am sitting in the car working on it and the drivers door is open it just keeps beeping. Very frustrating - but I can't see looking thru the spreadsheet how to disable this. TIA.

[@TheSergSlim]

Probably it depends on the region. In Europe it beeps few times only.

[@russmeachamruss]

@@TheSergSlim it never stops in Australia - very annoying!! Just wish there was a setting to stop it. Thanks anyway.

[@nimav82]

Question: Do you know why there is duplicate "Radar Market Area" in IC? There is 2 for US/Aus/Asia (and 2 for Japan)

[@TheSergSlim]

No idea, sorry. It's not very studied yet.

[@peterthanh226]

Hi Serg, what is the purpose of checksum in IC module 720-04-01 ? This checksum may the rootcause of my issue when can not write back to the IC module. Thanks!

[@TheSergSlim]

You should ask Mazda engineers what is the purpose of this checksum. I don't know why they added it. Probably to verify whether the CCC is correct.

[@antoniolepore4049]

Hello SergSlim in the FBCM if i change front and rear turn signal in LED i resolve the problem of hyperflash on mazda 6 2013 hatchback? thanks

[@TheSergSlim]

Sorry, I don't know. I haven't personally experimented with these functions, as I have LED from factory.

[@ticnic3021]

Hi, I did try to activate leaving and coming home light on my Mazda 3 2017 but after write all and restart the car, the code went back to the original code. Does this mean my RBCM doesn't support this function?

[@TheSergSlim]

I'm not sure. Probably depends on what exactly you tried changing to activate those functions.

[@wishyoucouldbeme0405]

Hi, would you know where is the setting for Mazda 2 cruise control speed increment? Mine is incrementing by 1km/h if I press +/-, my friend has the same car and his increment by 5km/h Also, maximum cruise control speed is set at 103km/h. Cruise control will not go faster than this. Do you have any ideas?

[@TheSergSlim]

No, I don't know. But you could try asking on Mazda3Revolution forums. And if you can provide VIN codes of both cars - it might help.

[@gt-plus38]

Hi, I have a 2018 Mazda3 GT. How do I add Global Windows Open & Close? Also, with my Aftermarket Remote Start my Engine shuts down when I open the door, can this be modified to remain running?

[@TheSergSlim]

What do you mean by Global Windows open & close? No idea about remote start.

[@bonjoeyt3]

how do you change the tire size on 720 4 09? i see the calculator but not sure what to do next after i input my values. thanks

[@TheSergSlim]

I need to test it myself. I plan on doing it in the coming days. Remind me at the end of the week.

[@bonjoeyt3]

@@TheSergSlim thats great! Thanks

[@Swiftkeyautolocksmith]

hello, my notepad and excel doesnt save the file as ABT file, what am i doing wrong

[@sdided1]

Hello, Mazda 6 GJ 2013 with MRCC/SBS, after Mazda dealer made MRCC calibration got informed, that the radar is defective and the MRCC calibration is not available, and the SBS is now always on. I can turn off via board computer, but after starting the engine once again, the SBS is on again. FordScan IC module shows, that SBS is off, but what about option NA? What does it do? Maybe it would it off completely? Before doing calibration, it didn't have this issue, and now don't have time to get new radar before technical inspection, and because of SBS fault I think the car won't pass it. Thank you for the information. Greetings from Lithuania. Slava Ukraine.

[@TheSergSlim]

Hard to understand the issue. Drop me a message in Telegram. T.me/sergslim

[@pattarabodin.5591]

Hi serg in mazda2 2020-2022 it can't disable istop and seatbelts alarm , Why can't do it?

[@TheSergSlim]

I have no idea. Maybe they changed something in the configuration for newer cars.

[@Blackcravin]

Hello SergSlimMazda, Thanks for the Sheet and Video! I have a Mazda 3 Alexa and the cluster is Japanese.. for me to change it to English would i need to change Block 1, B0 under the IC page, the region code to 010 / 001?

[@TheSergSlim]

Japanese IC does not support english language. You would get unreadable signs. You need to replace the IC altogether, or solder the right screen from european version.

[@Blackcravin]

@@TheSergSlim Thank you for the fast reply!

[@TheSergSlim]

@@Blackcravin www.drive2.com/l/617075338517698607/ You can read more about soldering way here ^

[@darhan.m]

Hello, have you find a way to change from L/100km to km/L ? I understand the km/L is used mostly in Japan, but my country also use km/L. However Mazda set it to L/100km by default. From 2017 model up, they use km/L. I've tried to change the region code to Japan in the 720-01-01, but it didn't work.

[@TheSergSlim]

Hello, no I haven't looked into it.

[@Bennymix99]

Thanks for this excellent info. I have been wanting to change the consumption to km/l as well. Any chance this has been figured out?

[@alvingonzales3510]

hi, all this settings can be also be done by OBD tool with ECU Coding right?

[@TheSergSlim]

hi, I don't know about that.

[@rinonguyen8827]

Hi Bro. Thank you so much for your time to create the excel file. its so amazing. By the way, on my mazda 3 2018 model, i want to active " find my car" but after run forscan i only can see : AS,F-BCM,IC,PCM,RCM,SSU as built. But checking your excel file, "find my car" stand on RCBM line 7B7-01-02 which is my car dont have. Would you please tell me how to do it please. thank you so much

[@TheSergSlim]

Different CAN. You need to have ELM327 with the switch, or ELS27 adapter, so you can switch between HS and MS CAN.

[@rinonguyen8827]

@@TheSergSlim yup, i using that ELM327 to access. Its some thing weird cause i using same ELM 327 with switch, Connected to my Cx5 2018 model, its show RCMB and able to active : find my car. But on my mazda 2018, its does show RCBM. Is there any posibility problem with that?

[@TheSergSlim]

@@rinonguyen8827 No idea. Either FORscan settings, or adapter itself

[@rinonguyen8827]

@@TheSergSlim thank you so much brother, i will try to find out the problem here. Do u have any guide or video clips on how to root CMu mazda connect firmware 70.xx?

[@TheSergSlim]

I don't think I have video. But you can check mazdatweaks.com/id7

[@luigidesantis1939]

Hi, i saw in your excel that Is possible to choose fuel consuption unit between L/100km or MPG..but i saw some mx5 with km/l unit..how It Is possible?

[@TheSergSlim]

It probably depends on region code and some other values somewhere. Not sure

[@luigidesantis1939]

@@TheSergSlim and changing the region code maybe might provoke a languange change or some unknown side effects

[@akaitv6606]

Hi mate do you know how to get into asbuilt timing maps and make changes ??

[@TheSergSlim]

I have no idea what you are talking about. Please elaborate.

[@peterthanh226]

Hi Serg, when i make change in IC module, the forscan did not let me write and raised an error "mismatch configuration" ... I use Spreedsheet calc v6.26. Do you know why? Thanks!

[@TheSergSlim]

Hi, no I don't know why it says so, given that I don't know what you're trying to change there.

[@peterthanh226]

@@TheSergSlim I tried to change region to US only. That's it. Hmm have you got the same issue before?

[@channel-nt5mb]

Привет, есть вайбер или номер просто? , есть вопрос по датчикам света и дождя, докорые у меня в мазде 6 18 года физически есть но по комплектации нет

[@kritsananutham4013]

Hi. How to change L/100KM to Km/l. Mazda 2 Thai Thank😍

[@TheSergSlim]

Hello, I'm not sure. Maybe region code in IC 720-01-01.

[@steve_ops]

After I make changes, does the file (I mean current worksheet or module) reset when I paste new 'orig' data? For example when programming a different vehicle

[@TheSergSlim]

Well, no. I mean Orig data will be for new vehicle, but if you changed any bits - they would remain. So I suggest opening new copy of the original file for each new vehicle.

[@steve_ops]

@@TheSergSlim Ok, thanks

[@jrgalang]

Hi, does a spreadsheet exist for CX-5 KE?

[@TheSergSlim]

This Excel file should work for KE as well, I suppose.

[@diogodiogo9512]

Hi, if i understand correct now is possible to turn on the menu function fo CX-3 to auto close the doors, my car is a model from 2018 and is an EU model? Thanks

[@TheSergSlim]

Not sure about CX-3. Nothing changed in the file in this regards.

[@diogodiogo9512]

@@TheSergSlim So if i´m reading correct in you excel this is possible to change at least in backgroung, the menu part is not clear, is this right?

[@TheSergSlim]

As I said, I'm not sure about this possibility in CX-3. It has BCMM, which might be impossible to change using FORScan.

[@HinhnomBc]

Bạn đã mở được tính năng của cx3 chưa? Tôi cũng đang quan tâm

[@MarkBrown-qh9iu]

How can I change the dash language on a 2013 mazda cx5? I tried changing the destination to EU and I just got fault lights on dash so I’m guessing it tried turning on some other options or configuration. I know it’s possible as I see others doing it as a service. Thanks

[@TheSergSlim]

CMU language + appropriate region bit in IC. Yes, changing region bit can cause some issues.

[@boithatelomokitimi7064]

Were you able to figure it out?

[@MarkBrown-qh9iu]

@@boithatelomokitimi7064 nah I tried but must have did it wrong as got fault lights come up on dash etc so changed it back

[@kcoop99]

I can't edit the spreadsheet to make changes....

[@TheSergSlim]

Have you tried downloading the file?

[@hongliang5710]

Dear author, I cannot open the file you shared by onedrive. Is there anything wrong with the sharing? Can you share it again? Thank you for the tutorial and sharing. It's pretty good. I wanna have a try myself.

[@SergiiLitnevskyi]

There is no problem with the file. There is some problem on your end. Try using VPN, if the link is not accessible.

[@hongliang5710]

@@SergiiLitnevskyi OK. Thanks for responsing.

[@adnansyed2122]

Hello, where can I get excel file for Mazda Cx5 ? Also how can I get istop to start working again ? I recently replaced the car batteries and istop stopped working.

[@adnansyed2122]

Sorry, found the file.

[@TheSergSlim]

Link to the file is in description to the video. Read User's Manual to your car regarding battery replacement or contact your dealer.

[@adnansyed2122]

@@TheSergSlim thank you, is the file also does Mazda CX-5 or for Mazda 3 only ?

[@TheSergSlim]

@@adnansyed2122 it is universal. Though not everything works on all cars.

[@fudik963]

Hello. My car 2019 mazda cx9 gt awd american model. I change region 720-01-01 usa to eu, 720-04-11, 720-04-18 radar market area for traffic sign. Everythink okey but airbag light on (B1202:01-8A) and (eatc u2300:64-0B) please give some advice.

[@TheSergSlim]

Replace Indicator unit and Climate Control unit with European versions.

[@fudik963]

@@TheSergSlim If I change the region EU to 111 Saudi (b3b2b1) will the airbag light go off?

[@TheSergSlim]

@@fudik963 No idea. I had experience only with US/EU and Canada regions.

[@RasSmak]

Hi. I have a 2020 CX-5 from japan and when I change the language from Japanese to English, the speedometer changed from 180kph to 260kph and records the wrong speed. How can I fix this?

[@TheSergSlim]

No idea. Never heard of such issue.

[@RasSmak]

@@TheSergSlim okay. Is there a way you can assist? If yes, what will you require?

[@TheSergSlim]

I don't think there's a way in which I can assist.

[@kvshats]

how did you change the language? kindly share the HEX

[@hongliang5710]

I have a Mazda 3 Anxela 2021. Is the file compatibale for it?

[@SergiiLitnevskyi]

No, it's not.

[@hongliang5710]

@@SergiiLitnevskyi OK. Thanks for responsing.

[@RasSmak]

Hi, how do I change the language on the 2012 Mazda 3? I tried in the IC section but an "incompatible" error popped up.

[@TheSergSlim]

I don't know anything about previous generation cars. This file was not intended for use with BL model line.

[@RasSmak]

@@TheSergSlim okay. Thank you. Is it possible to turn off i-eloop on the 2015 Mazda6?

[@TheSergSlim]

@@RasSmak probably yes. There's i-eloop bit in IC.

[@RasSmak]

@@TheSergSlim sorry, another question. How do you do the IC language change for the 2014 Axela/Mazda3? I tried with the 6.8 file and it scrambled up the screen so I just reverted back to its original language.

[@TheSergSlim]

@@RasSmak Usually it does not require any changes. In Europe there are no words there. Only icons.

[@fansgamer1581]

I need excel sheet for mazda 3 2012 BL pleassse, and I want to enable horn with close a car.

[@TheSergSlim]

If you need such excel file for BL - than create one.

[@fansgamer1581]

@@TheSergSlim ok, how can i do it?? What i need to do it??

[@TheSergSlim]

@@fansgamer1581 Get configurations of different cars and compare them to figure out which bit is responsible for which function

[@fansgamer1581]

@@TheSergSlim thanks

[@naushadmahomed6919]

Hello is the latest excel file compatible with mazda 3 2017 skyactiv? I would like to add auto door lock feature when driving

[@TheSergSlim]

Of course it is compatible.

[@naushadmahomed6919]

@@TheSergSlim thanks bro..ok so basically i enable the auto door lock function in B4 and set it to off (0001) in B0 so that it appear on my infotainment screen and then from there i can select the different options available directly from the screen? Is that right?

[@TheSergSlim]

There is a separate video on my channel where I showed activation of Auto Door Lock. Called Cruise Control activation or something like that.

[@naushadmahomed6919]

@@TheSergSlimsorry but i can't find that video on youtube.. i only watched tutorial on how to use mazda skyactiv obd-ll calc......

[@TheSergSlim]

@@naushadmahomed6919 it's in my channel, also in the playlist in my channel.

[@jakubjeziorek8586]

Hello,can you help me to switch front led lights be on all the time instead automatically on dipped beam?

[@TheSergSlim]

I didn't understand what you need.

[@jakubjeziorek8586]

I'd like to have the leds on all the time instead of the dipped headlights. Now leds are one only when car is no mowin. When it starts to drive, it automatically switches to low beam.

[@TheSergSlim]

@@jakubjeziorek8586 you can try playing with FBCM 726-01-01 B0 b0-b2. But I'm not sure it will make it work as you want it to.

[@mwstaton64]

how do you get a version to edit? all i get is viewing version

[@TheSergSlim]

Download the file and open in Microsoft Excel.

[@fudik963]

Hi. I have 2019 CX-9 grand touring (american model). I now driving car in europe. Traffic sign system work only american sign. Can I change to european sign?

[@TheSergSlim]

Change Region in 720-01-01 and Destination in 720-04-11 to Europe

[@fudik963]

@@TheSergSlim Should i change the navigation sd card? My card: usa/canada/mexico

[@TheSergSlim]

@@fudik963 if you're in Europe, than yes. Why would you need to use map of America, while being in Europe?

[@fudik963]

@@TheSergSlim Thank you so much. When I bought the car, that card came on it.

[@user-md8qf1it1r]

Hello, how does Mazda 3 turn off tpms?

[@TheSergSlim]

Hello, never did it, so I have no idea.

[@patb3982]

How to change odometer?

[@TheSergSlim]

Dunno

[@anthonyg87]

What version of forscan dit you use? 2.3.46 release?

[@TheSergSlim]

Why do you ask? Use the latest version available.

[@anthonyg87]

@@TheSergSlim because with ford on latest release there are more option available in configuration and programming so you dont need to change as built format. Dont know it this wil be the same for mazda? I always use latest release. I have life time forscan

[@TheSergSlim]

@@anthonyg87 Even when there are more options available to change via GUI of FORScan - I prefer to change via As Built, because that way I know what I'm changing.

[@anthonyg87]

@@TheSergSlim your right. Thanks for the information!. New for mazda with ford i know some things. Stil need to find out for mazda.

[@michaelalfaro6606]

HELLO FROM CHILE, I HAVE A CX9 GTX 2018, is it compatible?

[@michaelalfaro6606]

I require the I-MD

[@TheSergSlim]

@@michaelalfaro6606 I don't know what is i-MD

[@TheSergSlim]

Overall the file is compatible. Some specific functions might not work. You have to try yourself to find out.

[@Babyvipe]

Hi, SergSlim, may i know if i can enable LAS and Advance SCBS without additional hardware install? I have mazda3 2017 FSC Gen2 currently have LDWS, ALH, HBM, SCBS-F, BSM, RCTA, TSRS. Thank you!

[@TheSergSlim]

Hello. I think you can enabled LAS without adding anything to the car. As for advanced SCBS - are you sure that your SCBS-F is not the same?

[@Babyvipe]

My SCBS only support below 30km

[@TheSergSlim]

@@Babyvipe to tell the truth - I'm not sure, as I haven't dug deep into possibilities of FSC Gen 2, as I have Gen 1. So you'd better ask on forums.

[@Babyvipe]

@@TheSergSlim Ok,no problem,Thanks for fast respond,i really appreciate that!and your video helped a lot,thanks again for making it so simple for total noob like me.Good day!

[@Lukii666]

Hi, is it possible to unlock the touch screen while driving?

[@TheSergSlim]

Yes

[@Lukii666]

Would you be so kind and tell me how to do it? I must admit that you had to put a lot of work into discovering all this. I used your video to turn off the iStop function and the section, thank you very much in advance, best regards :)

[@TheSergSlim]

​@@Lukii666 mazdatweaks.com

[@EduardoTalaveraMoncada]

Wow Serg great work. Can you help me disable the i-stop function in my mazda cx9? thank You.

[@TheSergSlim]

Use the list of bits related to i-stop on Donate& Tutorial tab.

[@IceSmacker123]

Great question! That's what I'm going to do in my Mazda 3!

[@mail2cas]

Hi , How can i activate Leaving Home with forscan on mazda3 BM,2014???

[@TheSergSlim]

Hi, look in RBCM tab. But very likely, that your RBCM doesn't support it.

[@mail2cas]

Where do I have to change 0 to 1 if I wanna try?

[@TheSergSlim]

@@mail2cas look through the information on the tab. It's all written there.

[@mail2cas]

On your Mazda it works leaving home light?

[@TheSergSlim]

@@mail2cas yes

[@kvshats]

looking for excel file for Mazda Axcela

[@TheSergSlim]

Ok, good luck.

[@user-lk4sb9gq8p]

hi can you please send me the activation code for FORSCAN? I am having restricted access. thank

[@TheSergSlim]

No, I can't.

[@user-lk4sb9gq8p]

@@TheSergSlim I just bought one for 47 euros. It's worth the price. Thanks for the reply.

[@joshymcdaniel9233]

what code...? you download the software and then click on generate license 2 month’ u enter the number that’s on your elm 327 etc aka/ device i’d of the module you’re using’ the. it will generate a 2 month license key

[@zeal8326]

possible to alter RPM limit? and Top Speed limit.

[@TheSergSlim]

Probably via altering PCM FW.

[@zeal8326]

@@TheSergSlim what do u mean FW? I dont see that option in your excelsheet or Forscan

[@zeal8326]

My car is m3 2015 MY, Auto, 1.5L, sedan

[@TheSergSlim]

Because it's not available in Excel or FORScan directly. FW - firmware.

[@zeal8326]

@@TheSergSlim thats sad..

[@xristoslim]

am looking for excel file for Mazda Mx-5 2021

[@TheSergSlim]

tiny.cc/MazdaAsBuiltEditor

[@xristoslim]

Mazda 3 has the same settings with mx-5 if you know ? Because on the excel file i don't see mx-5 . @@TheSergSlim

[@TheSergSlim]

​@@xristoslimthe file in universal. Some options work for some cars - some don't. You have to know what you're changing.

[@xristoslim]

@TheSergSlim i want to change my dashboard cluster from Japanese to English if this applicable

[@sdevandiran]

hi how to enable HBC and LDW your codes couldnt be used in cx5kf

[@TheSergSlim]

If it can't be used in CX-5 KF, than how else can I help you?

[@sdevandiran]

@@TheSergSlim I meant the coding for the fsc modules (I used fsc gen2)were accepted but instrument cluster said unable to write especially 720-04-16,720-04-19

[@TheSergSlim]

@@sdevandiran than you're doing something wrong.

[@sdevandiran]

@@TheSergSlim can you guide me somehow? I feel that maybe the problem is 720-04-19 because there is so many combination to choose from? Any idea which one that works? Most of it also you put [?] so maybe haven’t tested? And I have no idea why 720-04-16 doesn’t work only one option for the codes … when I try to write it said failed and unsuccessful and goes back to default

[@sdevandiran]

@@TheSergSlim I used the excel file even then there is problem writing block 3 and 4 and i notice there is some letter missing in the code on the left you created maybe thats why when i paste into the .abt file it cant write hurmm otherwise thanks for all ur effort great job, with i could some how write the IC

[@ypautomotriz]

tutorial in spanish? when?

[@TheSergSlim]

No, it's not in spanish, and it won't be ever in it. Why should I record tutorial in spanish?

[@ypautomotriz]

@@TheSergSlim because there are too much people speak spanish and need your information. I am from venezuela and can understend you lenguage. but others not boss.

[@TheSergSlim]

@@ypautomotriz well, that's not my problem, is it? There are even more people who speak Chinese, but I'm not going to record videos in each popular language worldwide. It is available in English, which is international language. If someone doesn't know English - too bad.

[@rafaodrobinski1401]

Can you disable icon of Impact absorption bonnet? i changed cluster in 2018 mx5 to new cluster from 2020. Can you send me your whatsapp or telegram?

[@TheSergSlim]

No idea what icon you're talking about. @sergslim in Telegram.

[@rafaodrobinski1401]

@@TheSergSlim the red one icon. drive.google.com/file/d/1G0xMNWD-O0wN10ASVUjOw9vCyBx8mngu/view?usp=sharing

[@TheSergSlim]

@@rafaodrobinski1401 it's the first time that I see such icon. Can't help you with it, sorry.