Рет қаралды 15,690
In this video tutorial I show how I like to paint brake calipers when I choose not to powder coat them. It's very rare that I choose paint over powder coat, but sometimes exceptions are made. Before powder coating, this is how I have always painted brake calipers, and it has not failed me once.
These are remanufactured Akebono brake calipers from a 370z, or G37 Sport, that are making their way onto my 05 G35 sedan drift side project.
Calipers used:
-A-Premium Reman Front Akebono Brake Calipers
amzn.to/3D6EWkW
-A-Premium Reman Rear Akebono Brake Calipers
amzn.to/3ZOJZ34
Paint used:
-VHT High Temperature Engine Enamel Primer [SP148]
amzn.to/3QTxZJq
-VHT High Temperature Engine Metallic Burnt Copper [SP402]
amzn.to/3ZLVacZ
-VHT High Temperature Engine Enamel Gloss Clear [SP145]
amzn.to/3R30uVd
Products used:
-Klean Strip Acetone
amzn.to/3kyRjzw
-Black Nitrile Gloves
amzn.to/3WrgOQE
-Low Lint Shop Towels
amzn.to/3WsY9Us
Primer application info:
-Ensure ambient temperature is between 60°F - 95°F, and relative humidity below 60%
-Light Coat, wait 10-minutes, light coat, wait 10-minutes, medium wet coat
-Wait 30-minutes before color coat
Paint application info:
-Ensure ambient temperature is between 60°F - 95°F, and relative humidity below 60%
-Light Coat, wait 10-minutes, light coat, wait 10-minutes, medium wet coat
-Wait 1-hour before baking
...or if not applying a decal or stencil
-Wait 10-minutes after final coat and apply clear coat
Clear application info:
-Ensure ambient temperature is between 60°F - 95°F, and relative humidity below 60%
-Light Coat, wait 10-minutes, light coat, wait 10-minutes, medium wet coat
-Wait 1-hour before baking
Cure time:
-Bake at 200°F for 1 hour (after part reaches base temperature)
#caliperpaint #akebonoswap #driftsedan #g35sedan #4doorfun #vhtpaint
**************THIS VIDEO IS NOT SPONSORED**************
All parts, tools, chemicals and equipment used in this video were purchased with my own money.