Tv aerial connector repair - no antenna signal reception

Ebay store: www.ebay.co.uk...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
KZbin Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...

[@creepyd8814]

Hi My name is Alex . I just like to share my recent experience with u guys. I came to this channel because it was something deferent. Something that we all needed. Basic knowledge, Basic understanding, learning, and everything in the real time with real everyday problems. And have fan by learning and fixing . I m like u. Old school. Back in time we where fixing the black and white TV, amplifier, etc... I really enjoyed watching r videos . How u explain thinks etc.... Learning and enjoying the repairs . But unfortunately I had to realise that this channel is not like it was before . Maybe is to big now or I don't know . But is not anymore about learning and have fan . Now to much clever people are. They tell u how to do or don't do the things. Even r server where people should come together and help each another . Now if someone need help they tell him to do this and this, check voltage here and here , they ask for schematic, etc.. and poor guy he don't know how to do it . What they do they tell him to Fu...off . Your clever people just tell people off if they don't know something or they can't read schematic. This is disgusting. U should tell r dogs to back up a little. Anyway .. the point is u don't care about learning and have fan here . Now even u are afraid to do the repair by r way . Because u care about what this clever people will say to u . This is not that channel any more . Disappointed. Thanks for reading this guys. ..

[@randhawaharjeet3483]

Sorin sir. Because of you I started taking repair jobs. Earlier I used to tell the customer that the part (smps, motherboard) is faulty and you need to change. But now I repair them. I have zero knowledge of electronics but still I managed to repair 2 boards and 1 supply all because of you. Thanks a ton to you and Northridge fix. I am subscriber of both. Great respect to you both sir. 🙏🙏🙏👍

[@garrysachse7518]

I check every day for your uploads I have a small electronics repair business in Tasmania your utube uploads always brighten my day. Some suggestions re opening the Apple speaker, instead of using a soldering iron to open it how about a Dermal with a cutting wheal on it I think that it could have even saved time. You mention that you want a thermal camera I use a poor mans one its one of those units that have a laser pointer on it and just probe around especially helpful on small things. I do remember seeing someone had an attachment that you could put on a phone camera don't know if they are still available. In the past before hot glue i used to use super glue, crazy glue, what ever it is called when joining plastics together i would put the super glue on both bits and then sprinkle baking soda over it sometimes another drop of glue on it, it worked great on some jobs.

[@roseelectronics4582]

Nice to read your story. Isn't hot glue better than all of em?

[@oceaneight5583]

Hey Sorin... Thank u for giving us confidence to take action on repairing things by sharing your videos.. God will give you back Blessings that you cant imagine...

[@Lifeless11111]

Yes after watching his videos i had alot more confidence in repairs and i just do what i think its best and " see if it blow up" ;)

[@argee99]

That's what I would call a 'proper' board holder. Thanks, Sorin...

[@baguiotechnician]

GOD BLESS master SORIN you are the BEST did you know my electronics SKILLS boosted because of the way you repair how to be you YOU ARE A TRUE MASTER of ELECTRONICS master SORIN

[@Lifeless11111]

Sorin , awesome repair , ive repaired those before... You need to unsolder the can, but you always need to solder it back or reciever dont work , but im sure you know this .

[@waleed9128]

I have the same exact soldering station with the original soldering tips and it has been working like a charm. I bought it about three years ago and still going

[@remu3881]

Me and you done this stuff many times on vcr's and ctr tv's in the 80s I'm sure 👍

[@Mark1971-1]

Fantastic video what more can you expect from this gentleman

[@εηβερΠι]

Sorin, you are totally right with Hakko. I have the same issue with it.

[@Radek__]

6:08 "so, you have the middle pin, which is the middle pin, and ground is everywhere, ok?" Sorin 2021 :)

[@melplishka5978]

You get some interesting jobs sometimes Sorin. Well done. Your the best.

[@tongravity5668]

Sorin - best as usual!Greetings from Slovakia :D

[@andreasaurel-van28]

Sorin is a sweetheart

[@rajeshkumarbehera9275]

Last time also I told you to go for Sugon T26 Soldering Station. It is quite good. I am using it.

[@jeffoldbean]

Sorin my old friend. I suggested to you that a 0.5mm tip of a bit can only deliver a certain amount of heat. You suggested. That heat from the tip, of the bit was being dragged off. I needed a Buffer, is what you called it. It is not the temp, of the bit, but how much heat it can supply Constantly. That really matters. Lots of Copper. To retain that heat . jeffoldbean.

[@AnonymousRepair]

Did a few of these jobs, always easy money, nice repair

[@petervoss6745]

hey Sorin, there is somthing wrong with the station of your hakko. I work with this tips every time and they have good power. i only use cheepest tips from china, 3€ the tip. My station is a cheap KSGER T12 station from aliexpress. I am a pro in berlin, germany. Thank you for your work, for your videos. I learnd a lot about hot glue and diagnose. I wish you all the best.

[@kriswillems5661]

Sorin, check the voltage going to the element of the hako solder iron (under full load). It looks like you've a fake station of which the power supply is not powerful enough.

[@roseelectronics4582]

Sorin, your Hakko might've been defective. A good Hakko won't disappoint

[@roseelectronics4582]

I just saw the best board bolder ever 😂

[@ODRACLIVE]

Great video, Master Sorin, thank you!

[@FixTronics]

You great Sorin You videos causes addiction

[@ghislainriou9560]

Good day Sorin could you please tell me the model of the multimeter you using thank again for a good video.....God bless you ;)

[@samgibson100]

this is the BOSS.

[@GregM]

Was that a Hakko FX-951 that you had bought?

[@peekpt]

How is it going to work for hakko if you are using an inappropriate tip for the job? Longer tips have a bigger thermal delay from the point of the tip to the sensor. Are you sure you are using hakko original iron? Because the ripoffs have a less power heater inside. So if you are using ripoff tips on an original station you have a bigger resistor on the heater.

[@Electronics_Repair_NZ]

Sorin please modify manufactures Schematics, Can you make a video about Modifying the Hakko soldering station to make it put out more watts, who else wants to see that ??

[@Digitallabgr]

Sorin the sugon t26 or t26d is a very good soldering iron, small also very useful for phone board, and 80 watts and is compatible with jbc tips

[@felix158]

Did you try the Pinecil soldering iron ? If not you really should. It's 25usd + postage

[@poe9777]

Hi Sorin can u upload a video per day?on every evening i check your channel to see if u upload something new.Thank you

[@MrRvdbeek]

Thanks again

[@FrancoCoccini]

Mr. Sorin, did you try to calibrate that Hakko station?

[@informediatech-bruno5766]

OMG I NEED that soldering iron please link

[@yourchannel4105]

am from Ethiopia

[@FrancoCoccini]

Been there, done that a lot of times.

[@worroSfOretsevraH]

A link to the chinese soldering iron please?

[@mehmanqurbanov3042]

Hello. Where to buy this soldering tip ?

[@ctecrwp]

Sorin, for once at start I thought you will say it's a job for HOT GLUE.....😂

[@peekpt]

Sorin look for T26 soldering iron

[@gile849]

Please new video, new advanture..heheheee. Nice man :)

[@goodhealth342]

😀 good morning

[@Jejie1029]

Great Work

[@samsscia]

Back in the old days, I would a replace RF Connectors everyday. The customer would roll their RCA tv from the wall and the connector would snap off. Of course they denied moving the TV it just happened.

Sorin, any help with laptop battery charge circuits and battery detection?

[@jujujuoooo]

He did not , areial means antenna. This is an "areial" connector pin.

[@kenan2581]

Hello , from where I download the driver after the format on hp , after restarting it writes avtomatik repair , then diagnostics it . A blue window comes up because it cannot repair , restart and it says advanced . I tried running it in safe mode from the advanced options , it gave an error again , so if this happens you have to reformat it . but you format it again when you install the driver , I found a way but it is not a solution . I was removing the hard disk or ssd and connecting it to another computer with usb to sata and I was starting the computer with it and plugging it into the computer that was failing again , then the laptop would boot up . Why is this happening? It only happens in HP brands. I became an apprentice in a mechanic for 1 month, I was getting nervous. Please inform me, I know I took so long, sorry for the long haul.

[@hildadorn3435]

Hello Sorin What is the brand and model for your new soldering station? Thanks for your videos.

[@francissmith1924]

Looks like a Weller knock off

[@raymondgalland8074]

maybe some solder drip down and Short?

[@mitranasorinconstantin]

Salut tizule. Ia-ti un JBC si iti garantez ca toate problemele tale in legatura cu lipitul vor fi istorie ;)

[@mitranasorinconstantin]

Chiar si un weller sau Ersa sunt ok

[@chumatez]

Nice one

[@justinspiredfallout]

Time for a camera upgrade! :)

[@radit68i]

Original HAKKO beeping when reaching setted temperature, and turn standby when put in stand.

[@donaldhenke2750]

i like it....

[@a.z.7193]

TV is not so my thingy, because everything is diffrent, but I like to watch and maybe I learn something

[@kahlid-ataya]

1:03 and the name is " tuner "

[@davianceable]

most ppl feel the same way ,if u paid for a better equiepment u naturally expect its to be better or same with your old one ,but this era something is wrong even same model brand isnt same anymore with old one ,shorlife or worse performance/durability.

[@davidmarek6141]

1:39 Language is Slovakian :)

[@weerobot]

Cool..

[@ROBO.200]

Laptop won't turn on! Charges (positive and negative) were put wrong, 🤦‍♂️ how to fix the Please help me🥺

[@onetimelifebigcamera1607]

Hmm 1st ❤❤❤😍

[@drkizzman6715]

Sir I really need explanation on how to find 5vokt power supply on laptop motherboard

[@MrBaca325]

where is Sorin's beard? :) in the title you misspelled the letter, instead of "serial" you wrote "aerial"

[@davidlguerr]

Is that a thing in the UK, working with a cap on? Here you would be fired on the spot. It is considered rude to use a cap indoors.

[@johnjohn-yp5tn]

Who cares

[@KeyserSolsi]

The Chinese iron is a bad copy of a Weller. Use a Weller Sorin. They are the best.

[@zx8401ztv]

You could have said the coil is not a short at high frequencys. Dodgy job he he :-D

[@mariolemerise7732]

Sorry but you have a fake Hakko soldering iron. The yellow circle on the handset should be transparent and glows red when power on. Probably that the station is a fake also.

[@shahamuk]

👍🏻👍🏻

[@StromboliKicks]

Hey Sorin, maybe you could contact Hakko UK so they can verify if you have a genuine unit and if it's working properly. I've heard Hakko's menu is very complicated so maybe you did some wrong step and they can help you. Your model is very popular on the internet, it's sad you're so disappointed.

[@atoms1978]

Tv tuner not receiver.

[@jasonwilken9973]

I bought a cheap soldering station and a expensive one and I find myself using the cheaper one more as it works better .

[@vilim6304]

whay do not the title

[@Yoritomo3800]

Be careful Sorin, Hakko is a very copied brand, probably not a genuine one, especially if the price was low.

[@roseelectronics4582]

Hakko is the champion brand of soldering equipment and hence they are cloned more than any other brand out there.

[@Yoritomo3800]

@@roseelectronics4582 I personally prefer JBC and Weller, but that's just my point of view.

[@roseelectronics4582]

@@Yoritomo3800 I would've preferred them if I could afford em 😊

[@Yoritomo3800]

@@roseelectronics4582 I have got a JBC from 1981, it still be daily working, of course well maintained, obviously the resistors have been replaced many times but everything is original, i would say that 3000€/40 years = 75€ that is a correct invest, i am not sure actual model would last so long anyway...

[@roseelectronics4582]

@@Yoritomo3800 you spent €3000 in 1981? That's a fortune!

[@MrDinakdakan]

hakko are for millenials, old shool need old school tools

[@macoxygene]

Your hakko probably its a fake one !

[@fixer_of_everything]

Sorin, I think there is a time with 223k subscribers to start using a proper tools, I mean decent. I appreciate dodgy job but please at least use non-dodgy tools. Please buy JBC or anything chinese with T13 tips. Hakko is nothing special in 2021.

[@roseelectronics4582]

First

[@dimitrismaster]

Geto style repair, dodgyness level up!