NNBS Console Swap/Install into NBS Sierra Silverado (So Much Better)

NNBS Console Swap/Install into NBS Sierra Silverado (So Much Better)
Console Options
ebay.us/QD2OL8
Tools Used
Carpet Extractor amzn.to/3QzrRoy
Vacuum amzn.to/3SHSnxD
Simple Green amzn.to/3PpfrPw
Super Clean amzn.to/3IF40Ba
Detail Brushes amzn.to/3RzP639
Microfiber Towels amzn.to/3PIoDPd
Small Impact amzn.to/3braCGJ
Large Impact amzn.to/3braCGJ
Gloves amzn.to/3yfZJjT
Drill Brushes amzn.to/3Ad9QH2
Chemical Guys Silk Shine amzn.to/3QztJ0n
WD40 amzn.to/3pdobgC
In this video I show you how to swap in a NNBS center console. I have done the console swap in other vehicles but wanted to keep the center seat in this truck. I like the nnbs center console because of its cup holder placement and more storage. This is also a good option if you have a work truck seat that doesn't fold down into a console. This is a very easy swap and will work on Silverado Sierra yukon and tahoe. NBS Console can be found on ebay, craigslist or facebook market place in 2007-2013 trucks and suvs. All you have to do is remove the seats and set the new nnbs console into place. This console is a direct fit into nbs trucks or 99-13 silverado sierra yukon and tahoe. While it was out I took the time to clean the floor and vacuum all the junk out. We also clean the console up with an extractor I bought cheap. This cheap bissell extractor works awesome. After cleaning it we put some coating on to help the dry areas and protect it.
Hit the comments and let me know what you think.
Thanks For Watching!!!!
Subscribe and Follow TWA Motorsports
KZbin: / twamotorsports
Instagram: / twamotorsports
Email: [e-mail]
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/2Of60Z0
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer: This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

[@hortman5]

Very nice, I always get great ideas from your channel. I'm the first owner of a 2003 Chevy that needs a wee bit of attention and I see this swap coming.

[@TWAMotorsports]

Slow and Steady

[@bdtaylor1979]

I swapped in the same console/seat into my 2007 Avalanche. The original one had no storage and 2 cup holders. No I have storage in the top and the bottom and I have 3 cup holders! I got lucky and got one from a 2013 Silverado and it’s the same color as my seats. I also ran a power and ground wire with an inline fuse from the battery to the charging port in the bottom storage. Very happy with the swap!

[@TWAMotorsports]

If I thought I would use the outlet I may have wired it. Definitely love the console though

[@bdtaylor1979]

@@TWAMotorsports yeah, I wired the outlet probably a year ago and haven’t used it not even once lol. But it’s there if I ever need it. I definitely love the console as well, definite improvement over the original one.

[@TWAMotorsports]

Agreed

[@rodolfogutierrez1913]

You have a video on how to do that or somewhere you recommend? I got a 2018 jump seat and want to run power to it

[@TWAMotorsports]

Run it from cigarette lighter under radio

[@douglascamp4393]

Definitely a very quick upgrade, great installation.

[@TWAMotorsports]

Thank you. It was worth it

[@ramirocastillo2148]

@@TWAMotorsports off of what year was the new console?

[@TWAMotorsports]

2007 up

[@ramirocastillo2148]

@@TWAMotorsports thanks. Did you have to modify the brackets?it looks great…

[@TWAMotorsports]

No. It drops right in

[@markb3129]

I love it when I see toothbrushes and microfiber towels in your videos, I know something is about to get squeaky clean and detailed😎!! Vinyl floor looks like new, I love super clean and LA Awesome from the dollar store is some good stuff too.. Like the two storage areas in the console..✌🏻

[@TWAMotorsports]

Thank you. It is really a problem. Lol

[@markb3129]

@@TWAMotorsports it's a good one to have!! ✌🏻

[@TWAMotorsports]

Not sure

[@markb3129]

@@TWAMotorsports 🤣

[@birdmanthewelder]

Awesome! Had no idea this was a str8 across swap. Now to find me one in grey! 🙌

[@TWAMotorsports]

Thank you. It is a direct swap

[@keilylmm6377]

Good Friday afternoon Travis.. I'm just watching your video on console swap to mower truck.. I'm going to be installing my rear Detroit locker tru trac this afternoon. In my 94 project trans am... 👍

[@TWAMotorsports]

Nice Keith. Sounds like fun

[@rubenr7650]

It's looking good Travis. I changed out my center console on my tahoe back in 2016 when i changed out the interior

[@TWAMotorsports]

Thank you. Much better I think

[@rubenr7650]

@@TWAMotorsports it does maybe i should get a nbbs console on my nbs

[@TWAMotorsports]

I like it

[@2dogsmowing]

My 04 gmc sierra the old arm rest was breaking and woulf pinch my arm at times. I made a new arm rest or lid part out of 2 pieces of 3/4 plywood. Stained it and clear coat. Looks sweet with the rest of the wood trim the truck has. 😊

[@TWAMotorsports]

Interesting

[@2dogsmowing]

@TWAMotorsports I would share a picture. But obviously we can't on comment section. It looks like the old arm rest you pulled out. Just made from wood with the cutout in the top and locks down with the original push to open button.

[@TWAMotorsports]

👍

[@2dogsmowing]

@TWAMotorsports I seen you have email and sent a couple pictures.

[@TWAMotorsports]

@2dogslarry393 I got them

[@asvpxmi6uel]

I did this same swap on my 00 and I got lucky with the key for the bottom

[@TWAMotorsports]

Nice. Key would have been nice

[@birdmanthewelder]

So I just picked up a jumpseat/console for my 07 Classic crew. A nice little surprise (that I may have missed in your video if it was mentioned) is that there's a pop out cup holder on the back for rear passengers! Dope!

[@TWAMotorsports]

Nice. Yes it has a cup holder in the rear

[@Zatix_Ken]

I just pulled the seats out of my 2010 Sierra to clean 🥳

[@TWAMotorsports]

Lol. That's where it starts

[@tonydiaz4850]

great mod! love the process, hopefully doing this to my nbs very soon!

[@TWAMotorsports]

Thank you

[@laconecta6853]

Like it it came out clean

[@TWAMotorsports]

Thank you

[@csquared2458]

I just bought one for 10 bucks. Yes it’s identical to this one. Could use some touch up on the legs but overall decent with the exception of the latch’s being busted.

[@csquared2458]

Pretty decent shape for sitting on the ground for 3 years under a tree

[@TWAMotorsports]

Nice

[@TWAMotorsports]

Definitely a good price

[@lolife999]

What’s the process you use for your cleaning rags? Do you wash them? Throw them away? Main cleaner you use? Super clean and Simple green? Just curious how many rags you go through. Great video.

[@TWAMotorsports]

Only used three here. Buy a new pack for paint. Cycle to interior after washing. Throw some heavy soiled away

[@JuanHernandez-nt8rf]

I just did this swap on my 99 rcsb. Same exact color jumpseat too lol I believe your old sierra seats would be a closer color match to that jump seat. Unfortunately I still have the ugly work truck seats in mine. Another great video Travis 👍

[@TWAMotorsports]

Thank you. They would be a closer match probably

[@j-boy9256]

Thank you for the extra time it takes to film and work. Is there any way you could measure the distance between the back support bracket/hinge of the console? I'd like to swap the back portion into my 97? Thank you!

[@TWAMotorsports]

Truck is sold

[@j-boy9256]

@@TWAMotorsports thanks for the reply. Guess I'll be measuring in the junkyards next time I get out.

[@TWAMotorsports]

Should fit fine in a 97

[@jaysongomez6907]

Thanks Travis for another great video, my 04 Yukon has the front seat but not the extra storage and cup holders, so I'll keep this swap in mind. Also I did the drop on my Yukon with the parts from your video of the white tahoe, I have the back sitting at 33" inch to fender from floor and the front 32.5" inch via the 2 in spindle, torsion bar adjustment new upper a arm and still using stock keys and I replaced the front shock to a stock AC Delco, but the ride is still bouncy, should I try replacing the remaining front suspension components, lower control arm, tie rods, links ect. I'm looking at the MOOG problem solver parts, or do you think a coilover front upgrade? Or both Sorry for the long comment but I know your expertise in these trucks and need advise before the wife loses faith in my ability to have a normal riding truck 🤣 Keep up all the great content!

[@TWAMotorsports]

That could help. It will never ride like stock after a drop but good shocks really help

[@JorgeRodriguez-rs8sj]

I did coil overs for the front of my 2012 yukon and dropped it without the spindle, just the coilovers them selfs dropped it. It rides pretty good. I put belltech coil overs worth the money. I just had to buy there anti camber parts. Cuz the tires did a slight camber after the drop.

[@TWAMotorsports]

Yeah dropping without spindles will always cause an alignment issue

[@kevinbelport4926]

I’m rebuilding a 98 k1500 Suburban slt. Everyone thinks I’m looney tunes with the gas prices. But for a purchase price of $500… and everything is solid and passes smog. Why not. The interior is toast mostly. Where do you shop for Carpet and headliners! Thanks

[@TWAMotorsports]

They go forever if taken care of.

[@abdulrahmanalnajdi1784]

Thank you for this series… What’s the law of flipping cars in your state

[@TWAMotorsports]

Thank you. No real laws on that

[@pathfinder632]

This is a smooth looking swap. If you have a moment, could you measure the width, length, and height from the floor of the top? I’m considering a “non-standard” install 😉 Thanks!

[@TWAMotorsports]

Sold it or I would

[@pathfinder632]

@@TWAMotorsports thanks!!

[@Clappedoutprojects]

On the plastic you tube how to make plastic new with blow torch you go over it it fast with the torch and it knocks that out like new . Detailers do it to the inside of back hatches and door panels from getting beat up

[@TWAMotorsports]

I have done that for scratches in the past

[@85countryboy]

I have one for my 03 GMC Sierra single cab here in Florida they run 250-350 I paid 40 for mine out of a rolled 07 4 door truck Amazon has lids but you have to take the four screws out of the plastic under the lid and the hinge put on new lid

[@TWAMotorsports]

They are crazy priced on ebay. I do need a lid.

[@85countryboy]

Yessir I’m about to order a lid I have new latches for mine as well just need to install them still lol my truck is in the shop getting a stage 2 cam 6.0 4l80e posi rear end can’t wait to get it back the lowering it another set of black wheels and paint I have a shaved tailgate also

[@TWAMotorsports]

Nice

[@EmmAyeVee]

They do sell the lids online. Theres the third party versions on the likes of Amazon or eBay. And theres also some of the GM dealers from other states that have their own websites that sell OEM parts for cheaper than MSRP.

[@TWAMotorsports]

Probably needs one

[@rodolfogutierrez1913]

Can you upload a video if you hardwired the harness of the jump seat to make the cigarette lights to work so I can connect or charger or use them if needed? I’m curious on how to hardwire them or if you have a link , I would appreciate it.

[@TWAMotorsports]

Sorry but not making a video for that

[@kevinwatson8073]

I love this and had to subscribe

[@TWAMotorsports]

Thank you

[@rodrigorocha9752]

Inside the top console there suppose to have a divider that way you don’t have that problem with the little mats sliding mine luckily has it

[@TWAMotorsports]

Before I vleaned it all the goo kept it in place. Lol

[@rodrigorocha9752]

@@TWAMotorsports haha should’ve left the goo

[@TWAMotorsports]

Lol. Probably

[@antonyquezada6894]

First question, does this center console fit in a 2005 gmc sierra 1500? Next question, where did you get that center console?

[@TWAMotorsports]

Yes. Local salvage

[@Blitz0065]

Nice. Wanting to switch to buckets and jumpseat in my OBS

[@TWAMotorsports]

That will be a nice upgrade

[@danielhibbard2391]

Looks good great video

[@TWAMotorsports]

Thank you Daniel

[@StatikPsycho]

Does it fit right in place? I seen people that had to weld the brackets

[@TWAMotorsports]

Not with this one. Fits like stock

[@jmsmilin]

its a direct bolt in? from what years? thanks

[@TWAMotorsports]

Yes. 07-13

[@ryanmccrory970]

Are the seat mounts the same too?

[@TWAMotorsports]

Yes

[@rickygalindo2744]

If I were to swap the seats from my 04 with the seats off an 07-13 will they fit without making any adjustments?

[@TWAMotorsports]

Should fit but no idea

[@NAKASRODRIGUEZ]

Will this fit my GMC Sierra 1500 2000? Is this direct fit?

[@TWAMotorsports]

Yep

[@matiyroneasley2896]

What year truck did you get the console from?

[@TWAMotorsports]

2007 to 2013

[@andrew3965]

would your consider a 2015+ jumpseat in a nbs?

[@TWAMotorsports]

That's a good console too

[@kevinwatson8073]

Will this fit in a 2000 Chevy regular cab

[@TWAMotorsports]

Yes

[@anthonykeeney9040]

Will this swap work on a 2005 Chevy 2500 single cab?

[@TWAMotorsports]

Yes

[@delliott777]

What does NBS mean? I keep forgetting, lol. Awesome video, good work.

[@TWAMotorsports]

New Body style

[@delliott777]

@@TWAMotorsports thank you! I wonder if “Plastix” or other plastic restorer could help with those burn marks…

[@TWAMotorsports]

Probably could sand them and make it look new

[@theringer13]

Nice video

[@TWAMotorsports]

Thank you

[@tinkpartlow5160]

What year did that center console come from

[@TWAMotorsports]

2007 to 2013

[@tinkpartlow5160]

Thank you oh and i jusy got my And tend to delete For the cowl That was an awesome mod too didn't know anything about it till I saw your video

[@tinkpartlow5160]

That shouldn't said antenna

[@XAMONGXDAXWILDX]

Can anybody tell me what I need to do to switch my 03 Chevy seats out Like what is compatible And how to clear and avoid codes My driver side seat is worn out!!

[@TWAMotorsports]

99 to 07 or 03 to 07 classic are direct plug in

[@XAMONGXDAXWILDX]

@@TWAMotorsports I am specifically looking for leather with lumbar support Any advice?

[@TWAMotorsports]

Tahoe seats

[@robertovaldez7322]

Will these works on stick shift2001

[@TWAMotorsports]

It should

[@BeastlyWarrior228]

The problem with these though is if you have the seat up you lose the cup holders.

[@TWAMotorsports]

That's true

[@michaelford4387]

Yeah but if you are using the cup holders on the older style it's hard for someone to sit in the middle

[@TWAMotorsports]

True

[@BeastlyWarrior228]

@@michaelford4387 the dog usually sits there.

[@fourhillsfarm]

And all the junk, change, keys, pens, you name it gets blended into one ungodly mess. Probably the reason the one that came in my 2008 2500 hasn’t been up in about 12 years. Do like the fact that the bottom half locks. Anybody know if this combo will fit between the seats in a 2002 3500 base model in place of the jump seat.? Looks kind of wide.

[@johnkelly4043]

Do like 303?

[@TWAMotorsports]

Never tried it

[@johnkelly4043]

It’s like a dressing but leaves no greasy type residue. Matte finish. Lots of pro detailers use it. Which is how I found it.

[@TWAMotorsports]

I have seen it but just never tried

[@justinstjohn7150]

maybe don't grab the cup by the lid 🤔😅

[@fintansky9369]

I grab my lid with my cup

[@TWAMotorsports]

Probably so. Grande nitros don't give any cup to grab in that old style cup holder. Lol

[@justinstjohn7150]

@@TWAMotorsports ok you got me there 😂

[@TWAMotorsports]

🤣

[@rick5153]

Looks good I'ma do that on my 2000 thanks for the video

[@TWAMotorsports]

Thank you. Way better console in my opinion

[@zacharyking900]

Might have been more aptly named as a detailing video

[@TWAMotorsports]

Maybe so

[@rick5153]

Was better carpet or that black vinyl you have

[@TWAMotorsports]

Vinyl

[@matthewhutchins4284]

You sure this ain’t a video on how to clean your console

[@TWAMotorsports]

That too