the ULTIMATE SILVERADO INTERIOR UPGRADE & DIC wiring how-to GMT800

[@LawrenceTolman]

hey guys: I'm looking for a 2001+ denali front clip, in black, somewhere close to Utah. Hood, grille, bumper, lights, and all. Let me know if you've got anything!

[@jacobhobbs08]

The light output from the Denali headlights is horrible compared to the regular lights. Even with LEDs

[@Monte85ss3]

I had great luck with some cheap DDM HIDs on my 03 Sierra Denali. Later retrofitted Morimoto lenses into the stock Denali housings using an adapter plate.

[@TBGaels32]

You can probably find something in Vegas.

[@95ss7]

There’s a guy parting one out on KSL

[@sean.g4516]

Will the Denali headlights fit 2000 Silverado?

[@MPKPerformance]

I just did an Escalade interior swap on my 2000 GMC Sierra, after I did a 4.3L to 6.0L AWD conversion. It's nice how easily it is to swap things around on these trucks.

[@bladimirgarcia6063]

What year escalade

[@MPKPerformance]

@@bladimirgarcia6063 06

[@baileyfry]

@@bladimirgarcia606301-04 more than likely

[@Valdemar-Perez-III]

@@bladimirgarcia6063probably an 03-06

[@charlesdowling8115]

Most companies keep stuff like that. But yes, it's nice once you research what's easy or not.

[@2000blackstang]

Love it! I'm a ford f150 guy and turned 2 '97's into one truck. I love seeing these kinds of builds. You do like I do and clean/make everything look new/ factory. Even if it's not the best looking truck. You were my favorite to watch on the TV show too. Too bad your in Utah. I'm in Minnesota. A little far off of a drive for me. Keep up the good content man!

[@dmoney420vision6]

Would've liked to see the DIC wiring more closely as it was being wired. It was to fast tracked on that part for me.

[@teaguegearhart9851]

Looks brand spanking. Loving the video. This is all stuff I would feel comfortable doing and not costing myself thousands if I screwed up. Thanks LT.

[@doug81337]

Love the Denali trim in Ugly Truck...pretty sure thats what I need to find for my rcsb Sierra. Thanks for showing how this upgrades...gives me some more confidence on the electrical side of things.

[@Reffuhnayr]

Hey LT! Loving the content as always. Thought I’d drop a tip or maybe opinion that I find coming to mind often. When I watch your videos in particular I always feel like the music added is too loud and needs to be brought down a few db - particularly on transitions where you may be talking or explaining something. Could all be my imagination though! Making the video is as much an art as you working on the truck, and I for one truly appreciate the small details in that!

[@martygraham5238]

I'm Definitely gonna but a DIC in my ls swapped gmt400. This is awesome

[@erichildreth7562]

Nice work and the interior does look great!! Since those door panels are almost identical you could swap out those speaker grills for the other ones that say bose on them for the fun of it, as you know they are super easy to do. Really enjoy watching your channel and your attention to detail is unreal amazing!! :)

[@bigredracer7848]

5👍's up LT thanks for taking us all along with you

[@marcuslandry3804]

Put the Denali seats in the step side along with your old console

[@NickTheFelice]

Man it looks so good. I just did the "big brake" upgrade to 2008-2013, power stop kit from summit today. I think I might go scavenge a Denali or 2 for this build next year. It's a 271k mile truck and it'd be good to feel that "new car" vibe.

[@scubamann2701]

You’re content is awesome man super informative and nicely done love to see it!

[@LawrenceTolman]

I appreciate that!

[@casualobserver1663]

Love mixing and matching factory stuff

[@LawrenceTolman]

Me too!

[@FuzzyRSK]

Looking really good. I love how modular these trucks are. Keep up the good work. Have you seen the LED upgrades for the dash lights?

[@james10739]

That's pretty cool I never knew anything like that existed in those years

[@tucksmith8300]

I definitely like the upgrades on the ugly truck

[@68lott]

I just found your channel and I couldn’t figure out why you looked so familiar finally realized you’re LT! Used to love watching those shows on Saturday mornings

[@LawrenceTolman]

well thanks for stopping by and subscribing to the channel!

[@r0ast5_61]

I'm going to try to install the dic from the blazer into the overhead console in my gmt400. In the 98, it's supposed to be able to give mpg and all that.

[@2000S10V6]

Looks great! Cloth seats look much better in my opinion and they don't crack.

[@james10739]

Ya I don't have much of a preference I guess

[@karyndakougar]

Check junk yards in the older chevy/gmc trucks. They have a pocket that if I recall mounts up like that cd changer. I normally pull all my cd players out because I swap over to aftermarket head units and replace the cd unit with thr pocket

[@jeffkamp5743]

Picked up the ebay radio (bluetooth) you mentioned for my '98 truck and its great.

[@Theduallyshop]

I have the radio you mentioned form eBay “1 factory radio” it’s awesome in my gmt 400 (same radio), I got the one with a CD player, headphone jack and AV wires for amp hook ups NO Bluetooth. The Bluetooth is only for music you can’t use it as a hands free, only the headphone jack hook up works for talking, it comes in perfect and clear, I’ve had mine for 4 years now with no problems. You can get a “work truck” cubby tray form a gmt 400 to replace that 6 disc it fits in a gmt 800 also eBay or Amazon buy.

[@LawrenceTolman]

glad to hear that it works nicely. I kinda want one for all of my trucks.

[@Theduallyshop]

@@LawrenceTolman yes me to have a 99 suburban, 2000 c2500 ccsb, and a 2000 c3500 cclb only have 1 radio want to get 2 more but there pricy compared to aftermarket radios

[@santiagoanguiano5991]

Awesome video! Was really hoping you tackled the powered seats. I have manual seats I’m also converted to powerd/htd and coulda definitely used guidance on approach!!

[@SleepWarz]

As far as i know just run power to them and your good to go. I have power seats which i adjust by running power when i need it

[@manuelutreragonzalez3968]

The update was very good for you, it is an impeccable job in my opinion, for this reason I have decided to install the DIC in my truck, I just acquired it today, but the display does not have the connector or cables. Could you please tell me where I could get this connector? In the same way, I would ask you for support if you could provide me with a diagram indicating the connections of the DIC in the electrical system, I know that in your video you explain it on the blackboard, but I would be very grateful if you could provide me with a printed copy. I thank you in advance for your comments and again my congratulations for your work. Regards,

[@shakenfake]

Good job LT. I could never find the schematic for that DIC. I think I had part of it but nobody had confirmed if it worked or not. I plan on purchasing one eventually and mounting it in the cubby in the overhead console since I have the 2003-2007 console in my 99. When you do replace the lights please post a video on that as well! I have blue LEDs in all the switches and would have to switch those ones too haha! Thanks for the content Edit: My vote is definitely add the leather seats and look for a backseat later. The heated seats rock. Also did you get the shifter out of the Denali? It is leather wrapped and kinda cool. I have one from an Escalade.

[@LawrenceTolman]

the shifter that was in the denali was kinda beat up, and not even sure it was a good leather one, so I left it. Also left the steering wheel since it was the lighter cream color, and I prefer the darker steering wheel

[@jamesearlcash7725]

I much prefer the cloth manual seats to leather power. My sister has a Tahoe with the leather seats and whenever i drive it it feels like I’m slipping out the seat, also it gets hot in the summer. Great work, keep it up👍

[@LawrenceTolman]

agreed, the leather ones do seem very slippery

[@one87monte]

Great video, very informative. Quick question, I have a 2001 silverado and I am trying to convert the switches on the doors (windows and locks) to the 03-06 style. Do you have the pinout and color codes for the 03-06 switch wiring? Thanks in advance.

[@mcdblhndl]

keep it up LT! This is fun to watch!

[@mannys2893]

Love it! The details make a difference. I can't wait for the stepside muscle truck. I'm interested if the stepside bed weighs less than the regular bed of the same length.

[@fartzr.schmelli3351]

The stepside reg cab shortbox is the lightest truck on this platform. The outer bed bits are fiberglass. I think actual weight is around 4800lbs?... Dont quote me on that. But that figure is stuck in my head for some reason.

[@markszczepaniak5888]

Thankyou for that video, not too many people explain the depth as you do on your work. I guess you miss Jeremy Bumpus. You seem to stand in front of the picture a lot, you both did a great job on trucks. Lol

[@TheBeardyBardsGamingExperience]

Have you found the DIC to be accurate in measuring the fuel economy? I think I’ll throw one in my 2002 on the overhead console, but if it’s not at all accurate it probably wouldn’t be worth the trouble

[@Oldguy1900]

Considering doing it myself,appreciate the vid.

[@LiLrampage209]

Hey LT I’m doing the same swap on mine but I went with an Escalade console. I wanted to see if you were able to get a little better video of how you wired up the DIC. I know you have the colors and pins posted but wanted to see if you have how you ran your wires and actually made the connections thanks truck is looking awesome by the way

[@lorenzohines3601]

Now could You put the Driver information center in the storage compartment overhead where Your dome lights are at?

[@Duhamal]

I just found your channel while looking for this exact video! Im just curious if the DIC worked out or if there was anything else you had to sort out later on? I am looking to add one to my 2000 Sierra 1500 as well.

[@LSLuis-rq8nj]

Ugly truck ain’t so ugly no more 🔥

[@LawrenceTolman]

nope, slowly looking better and better

[@undnrchevys4810]

Added the DIC to the overhead cubie on my 02 Avalanche many moon ago...I Liked the top speed recall in it.

[@locogringo4rzl]

Hope that isn't her in your avatar pic..

[@undnrchevys4810]

@@locogringo4rzl HAHA , nope.

[@locogringo4rzl]

@@undnrchevys4810 that’s good! Haha, fellow 02 Avy owner 🙋🏼‍♂️

[@kailuagarage]

I have had good luck with 303 aerospace protectant on the dash and interior. It is not very shiny and has good uv protection which is more of an issue here at high altitude in Colorado and I would think for you in Utah as well.

[@LawrenceTolman]

Never heard of that, but Ill have to check it out

[@waynesworkshop7069]

The wt1500 95-98 dash pocket works in the tape/cd spot

[@LawrenceTolman]

i'll have to double check. i thought for some reason the opening was a slightly different size

[@waynesworkshop7069]

@@LawrenceTolman that's what i did on my 2000 with the full console. Its always nice using oem parts

[@locogringo4rzl]

Just finished my 4l80e swap thanks to your series! Now I'm going for the console swap.. Do you have any preference on choosing the 01-02 version vs the 03-06 version of this console? (excluding all electronics)

[@KanakaMaoli1]

Looking really good LT

[@ryanalder9691]

FYI, to make life easier, there is a pocket that is a direct fit for where the CD changer goes in the console.

[@hugopoirier3204]

You should try to add the aux plug yourself to your bose radio! There are numerous tutorials to add the aux plug and you don't need to be good in electronics to do this mod. I did it on two delco radios on my old Sierra and it went great! Would make a good video too!

[@joshuaduehring9524]

Looks great but we did not hear it. I watched all of the parts to this in hope to hear. Well done sir!

[@davidrutledge6033]

Now i love how you are doing the full size trucks but how about some first gen s10 love Lt

[@LawrenceTolman]

its on my list lol... to many projects to keep up with already.

[@DMDAUTOLLC]

This guy is precise

[@pancho123ification]

Add steering wheel controls also I added them to my 00 Silverado from an 02 Denali.

[@chaotic_wolf5767]

Do you have stock or aftermarket radio and how’d you run the green signal wire (I’m doing both rightnow controls and interior swap)

[@garypease7414]

Hey LT, just a thought, wire in those other 2 power ports in the console, and put in USB ports so your dash power isn't so busy.

[@LawrenceTolman]

I really should hard wire a pair of USB ports inside the console.

[@taylorshiver3284]

Man, I really shouldn't have watched this video. Now I HAVE to have this DIC for my 02 Silverado, and I also need to replace the jumpseat with a console for the rear AC. I had no idea that was a thing for the early extended cabs.

[@altheacanady9375]

Can you add power folding mirrors to your truck. Havent figured out how to wire mine up with factory switch from a Escalade, in my 02 Silverado

[@Mr_Ruhl]

I had a 02cc with the middle console (not Denali), never liked it. I now am working on a 00 with the 40,20,40 front and I like I much more. Idk why, but it feels more like a truck. I did buy the flip out cup holder from the bay and i feel like when it's extended it does everything a dedicated center does when you want it. Replaced 2 of the 3 "cig lighters" with a 3.0 USB to my double din and a Amazon dual 3.0 \ volt meter.

[@BryanBeast13]

Lt looking fresh

[@bsaxonfishing2163]

Can you get to the heater core with just dash cap removed?

[@jaredcissell1454]

Hey LT i have a question for you. Did they ever make this style of console with rear vents? Im wanting to swap one into my cc 06 slt but the stock console has the vents and i would really like to retain. Thanks

[@raulguerooo]

Any tips on how to fix the paint on the hood ? Mines looks like his

[@aruixa2602]

I have a 2002 base model Silverado, you think if I get a 2003 Denali I can change the dash and everything completely and make it electric?

[@markb3129]

Great video, love all the mods you're doing on the two chevy's, now you're giving me more ideas to do👍. I have a 2000 chevy silverado 3 door stepside Z71 that I'm doing some mods to.. Installed a double din radio with reverse and front cameras and Bluetooth, all interior LED lights, Installed door mirrors with turn signals (wired to body control module) heated ( by adding a relay in fuse box under the hood and changing the a/c controller to one with the rear defroster just plug and play) and puddle lights that i cannot figure how to wire them, tried wiring them to the door courtesy light, but they stay on all the time, any help would be greatly appreciated. ✌

[@flashgordon67]

They do make a simple cubbie replacement for the CD player. Amazon or ebay have them.

[@krnwhitlow]

Great job LT 👌 looks great thanks for the hard work

[@raymondhamm7350]

Can you salvage bulbs out of the cd changer to fix the driver info unit? Good stuff!

[@LawrenceTolman]

Yup, probably could do that. Not a bad idea

[@AlvaroLopez-dn4rm]

How does that light from the ash tray light work/turn on ???? I Need help

[@ChannelRM1]

What do those drive meters/trip meters come out of? or did i miss it in the video? lol

[@jeremyparsons2944]

I always wanted to put the dic box in my 4th gen camaro, but never got around to it

[@lilshaff07]

Wow - looks good! Thinking of doing the same to my 05.. any experience w/the '14 consoles? Have heard they can work but bit cautious as I haven't seen much on it! Have heard the mounting brackets can be different, but I am more worried about how it fits at the end front dash section.

[@ValarAmstaffs]

Great video LT!

[@jimmyramirez8844]

If I want to do just the Denali bezel do I have to swap dash?

[@krossoutkustoms4061]

So how would I go about this in my 2001 Sierra rcsb? Basically the same? Cause I'd like to keep the dark grey interior it's got, and most Denali interiors I've seen are that two tone tan color.

[@HAMMER_2.2]

I'd love to have a dic gauge in my obs when i tackle the LS swap in it, would be cool to keep an eye on mpg and fuel consumption. Any idea what data it reads from the obd2 port pin? I assume it keeps an eye on fuel tank level to calculate disrance remaining. If so, this might not be for me unfortunately

[@LawrenceTolman]

It would gather fuel tank level and fuel being currently used

[@craigdave3266]

Do you know if the escalade bezel fit the Silverado dash

[@joshbrake84]

The heated seat buttons how much for them? Driver and passenger

[@TheNerdSwagg]

This is awesome man enjoyed the video

[@wicked650s]

Hi LT, what is the name of the twist handle ratchet you were using? Thanks!

[@BIGMACB0Y]

Would it be the same wires for a 99 gmc yukon??? Very nice setup with the interior... Definitely enjoyed the video soo thanks again for your service

[@LawrenceTolman]

I think so, but I can't guarantee that.

[@gustavoguzman7121]

Hola, busco el panel trim de la puerta del conductor, de una chevy silverado 2003, Donde podría encontrarlo?

[@michaeldesrosiers6259]

I need ur help how do I convert the basic Tahoe ac control with the Denali lcd dual climate control my main blue plug pops right in but the second plug is different I’m getting power and illumination but no fan speed or ac or heat

[@MarthallersMisadventures]

Very nice work LT!

[@LawrenceTolman]

Thank you! Cheers!

[@FoFoCowboy]

Hey LT, I have a 2004 Silverado I want to convert the overhead console for a console with homelink. I was wondering can you just use the stock harness with only the console lights and just share those wires to power the homelink or should I just go get a harness appropriate for homelink?

[@LawrenceTolman]

from looking at my homelink roof console, it looks like it has the same plug on the body harness, and they just split power in the console side... should be plug and play with a non-homelink truck. (I think, haven't tried it yet)

[@Bluecollar_obs_limo]

I did the same to my 05 Silverado,,I'm actually going to all carbon fiber trim pieces...idk how I'm gonna like it with the tan/beige interior

[@Bluecollar_obs_limo]

Keep your eye out for the holy grail steering wheel with that wood grain

[@russelltrupia4479]

Great info. awesome job LT👌

[@LawrenceTolman]

Thanks 👍

[@rushtk2112]

I have a 99 tahoe 4dr and am trying to find what will work in it. Any suggestions 🤔

[@curvs4me]

Great idea 👍🏼👍🏼 I'm absolutely loving the big block route. I'm just tired of looking at and hearing others talk about LS motors 🤔. Yes they can exceed 1500hp but.... Not something that's going to last. Aftermarket big blocks are hovering around the 3000hp mark maxed out. Better parts, beefier construction, big block!

[@LawrenceTolman]

Totally agree! Can't wait to see what the 547 is capable of

[@anthonyrodriguez-fo4lz]

Do you still have the Denali seat's?

[@chitownhp83]

Nice upgrade!

[@dbrandon4528]

Love the swap.

[@MrScottt7]

Hello doing 2002 silverado to 2003 escalade any way to hook up 6 cd changer to a kenwood radio thxxxx Scott

[@EhvoOnGo]

and now i’ll be installing a DIC in my truck 😂🙌🏼

[@leviwoodring6101]

You can buy a pocket. No need to gut the cd player. Look up 95-98 chevy cd player pocket.

[@pychokenny1]

There are a few places that make blank plates or switch plates for that space

[@fulbldpitps4625]

Can u hook the mpg gauge up in the obs suburban

[@LawrenceTolman]

You should be able to, yes.

[@fulbldpitps4625]

Ok cool

[@brendan747]

my DIC in my escalade interior swap is .4ish MPG off. but i have big injectors and what not but it’s close!

[@LawrenceTolman]

That’s way close. Good to know!

[@cbr1thou]

Why didnt you use a factory dic cluster and swap column for steering wheel controlled dic

[@LawrenceTolman]

That’s for the 2003+ trucks, which use totally different wiring and data communication than the 99-02 GMT800. Not compatible

[@HermesVintage]

Does anyone know what exact wood grain this is? I’ve noticed there’s this one and a more orange wood drain Thanks

[@gocart09]

Yeah I didn't have any cracks in my Dash but I ended up using flock and then I used Flex seal on my door c pillars along with like other spots as well

[@LawrenceTolman]

that would be a nice touch

[@patricianelson859]

I am an 81 year old lady with a 1984 silverado. Is there any dash that will work on that. Need the whole dash. PATSEY

[@thrillwill9017]

Ok so I got the dic in my 02 Yukon slt my fuel remaining part of it is working correctly but nothing else. Avg mpg instant mpg aren’t doing anything just staying on zero. Any tips on what I could be doing wrong.

[@LawrenceTolman]

It’s been forever since I did this, but is the VSS wire properly connected?

[@thrillwill9017]

@@LawrenceTolman yes I have. Went over it and over it. Found a schematic online of the dic wiring on an 02 Escalade and it’s showing the green and white wire branching off going to the instrument cluster. It’s just strange and driving me nuts. I will go over my wiring one more time and make sure everything is as it should be. Thanks a lot for the response and your time.

[@WoodshedCustoms]

Nice job LT. Looks great!

[@cristianjuarez9189]

Is it possible to 3d print a storage pocket where the CD player would be just an idea

[@LawrenceTolman]

Sure would be. That’s beyond my skill level, but someone could surely do it

[@krnwhitlow]

How do you get 240 ftlb for the harmonic balancer after a cam swap will you be showing us on the mighty mouse 4.8

[@LawrenceTolman]

There’s a small tool you can get that will lock into the teeth of the flywheel to hold the engine from turning

[@User8571]

Really enjoying this series, LT. Tons of useful footage for anyone working on a GMT800. I hope you keep going with project Ugly Truck until it's just a monster street/strip daily driver. I have to ask, though. At what point does it become easier and more economical to just buy a used Sierra Denali 3/4 ton with an 8.1/Allison? I know they're not exactly growing on trees but, they're around.

[@LawrenceTolman]

yeah, I could've done that, but a 1/2 ton is lighter and I'd prefer the 4l80 over the allison in a high performance application

[@RHYNOMAN12]

If Canada was closer, I just picked up a loaded silvy 2004 electric 4x4 leather/heated/memory and 5.3 I only wanted the frame.

[@joncarlos716]

I remember messing around with my dads Denali computer you can change the lights time out and trailer lights