Yes!!!! I've been waiting ages for this video. I've got some chrome rings to wrap. Cheers mate.
@tweedbean4 жыл бұрын
No problem, good luck with the wrapping
@jamiejude4 жыл бұрын
The only clear and thorough video I've found! thank you!
@tweedbean4 жыл бұрын
Thanks for watching, glad you found it useful
@JonCannings4 жыл бұрын
@@tweedbean really helpful
@PonsorProductions2 жыл бұрын
Just picked up my MINI yesterday! Great video!
@tweedbean2 жыл бұрын
Thanks for watching
@EnviroDouglas3 жыл бұрын
Thank you! I was wanting to use 2nd gen donor squirters for 1st gen. Even though it looks the same outside, they are quite different underneath the chrome plated plastic cover. Great detail in your video! Cheers mate from across the river.
@tweedbean3 жыл бұрын
Thanks for watching.
@HellaMeiste3 жыл бұрын
Thank you, I actually need to replace R53 of the head light (L) of my beloved, she was crying because accidentally hit the deer at night, now I know how to follow your step... thank you
@tweedbean3 жыл бұрын
Thanks for watching
@Strike863 жыл бұрын
Great guide to this job, thank you!
@tweedbean3 жыл бұрын
Thanks for watching, glad it was useful
@blowfishes2 жыл бұрын
Excellent instructional video. Thank you 💜
@tweedbean2 жыл бұрын
Thank you
@blowfishes2 жыл бұрын
@@tweedbean Do you have any videos showing you prepping and respraying your chrome headlight surrounds? Would love to see this done properly, so that it lasts and doesn't peel after a few months.
@tweedbean2 жыл бұрын
@@blowfishes hi however much that’s a great idea for a video, I’m not a paint expert so wouldnt want to advise as it can go wrong easily. My Bodyshop did all the prep and paint on the r53
@brettstevens57073 жыл бұрын
Nice work ! Will try it this weekend, thanks
@tweedbean3 жыл бұрын
Thanks for watching, glad it was useful
@NudnikShpilkus Жыл бұрын
A timely discovery, this video. I have to polish the one headlight lens, and need to get the chrome rings off to keep them in good shape....
@tweedbean Жыл бұрын
Nice one
@ianhutcheon9424 Жыл бұрын
Great video bud
@tweedbean Жыл бұрын
Thank you, hopefully it was useful
@craigsampson4267 Жыл бұрын
Thank you! What I really want to do is to replace the foggy headlight lenses - I would think that would be needed much more often than replacing the trim rings! I'm looking around the 9 minute mark, and it's not clear but I'm guessing they can be either snapped or screwed off and replaced, am I right?
@tweedbean Жыл бұрын
People tend to remove the headlight rings to colour code or paint black rather than replace. If you are referring to the headlight lens. They are glued on, check out my r56 joey mod video as the r53 ones are held on in a similar manor: How To: Mini R56 How to joey mod your R56 Headlights also clubman coupe roadster Cooper S JCW One kzbin.info/www/bejne/amXYhYOmnaZ1paM
@ajlawless79374 жыл бұрын
hey there think you could do i vid/tutorial on joey mod for headlights on the R53?
@tweedbean4 жыл бұрын
Thanks for watching, I've had a number of requests for this however I dont have a spare set of lights, if I take mine apart again, I will make sure I record it
@NudnikShpilkus Жыл бұрын
+1 for this.
@WingMan13 жыл бұрын
Hi. Is the rest of the headlight unit sealed? I have a lot of condensation on mine!
@tweedbean3 жыл бұрын
Hi thanks for watching. Firstly check the plastic covers on the back where you change the bulbs are on properly as they have rubber seals. If they are ok you can spilt the lights and reseal them, that’s how people joey mod them.
@WingMan13 жыл бұрын
@@tweedbean Great thanks for the heads up.
@jasondonavich27582 жыл бұрын
Is it really necessary to take the whole light assembly out just to remove the rings or can I do it while they are still attached to the car?
@tweedbean2 жыл бұрын
You can but you can’t see where the clips are so run the risk of breaking things.
@colinmettle46664 жыл бұрын
Thanks!!
@tweedbean4 жыл бұрын
No problem!
@BeegYoshi.4 жыл бұрын
Do you have any tips for removing the whole lens of the headlight ?
@tweedbean4 жыл бұрын
Do you mean the clear lens so you can paint the inside chrome parts?
@BeegYoshi.4 жыл бұрын
@@tweedbean Yeah those
@tweedbean4 жыл бұрын
Hi use a hair dry to heat around the edge of the lens to loosen the glue. There are a couple of metal clips from memory near where the headlight washer attaches that you need to remove, they should pop straight of with a flat headed screw driver behind them. also helps to leave in the sun or store in the airing cupboard before hand. Take a look at this www.northamericanmotoring.com/forums/interior-exterior/167358-how-to-joey-mod-facelift-halogen.html
@jamiejude4 жыл бұрын
can you do a grill removal video?
@tweedbean4 жыл бұрын
I will take a look this weekend, cant see why not
@KROUTCHY3 жыл бұрын
thnx!
@tweedbean3 жыл бұрын
No problem! Thanks for watching
@agnosticevolutionist356710 ай бұрын
Skip to 5;54 minutes to see how to do it
@tweedbean9 ай бұрын
Thanks for the tip
@Charlottebell3333 жыл бұрын
Hi, do you have any idea how i go about replacing my mini cooper r50 front fog light trim rings? My drivers sides' silver trim casing for bottom fog lamp has mysteriously gone missing (stolen maybe? as i cant see how it has just fell off?), so before i buy a replacement , i just want to know if its a simple job or not? Thanks!
@tweedbean3 жыл бұрын
Sorry never worked on an R50 so cannot help
@jackbenson49663 жыл бұрын
Thanks I broke my tabs off this doesn’t work at all
@tweedbean3 жыл бұрын
Sorry to hear that, Unfortunately that’s due to a poor design by mini not the process you followed. Hence they changed the design for future models, they weren’t designed to be removed because at that point they didn’t plan on offering none chrome versions like they did with other generations so they weren’t design to be removed easily. Unfortunately these cars are coming up to 21 years old in some cases so the plastics are brittle and some do break, I know that doesn’t help you