Twin Turbo LS1 BMW E30 | Dream It Do It

[@maperformance]

What are your thoughts on Ryan's E30 build and what would you have done if it was yours?

[@shanevermij4780]

I have a n E30,but this one is way to cool

[@danielbrealey2924]

I think his turbos are just fine, they have drained all their oil out of the cores and the dry bearings probably feel a bit sloppy. I doubt they have copped that kind of wear in such a short amount of time... 😁 Other than that, I would have plumbed a proper exhaust system to make it a nicer street car. The placement of those turbos and the exhaust dumps are a little lazy... Believe me, I understand the difference in fab time and effort, I'm 21 yrs qualified as a mechanic in Aust- that being said, it"s also why I believe it was a little lazy... Other than that, sick ride... 👌

[@danielbrealey2924]

Wow, those diff gears and the tall gears in that trans- that's going to have some serious top end on the highway... Turbo cars don't get hurt as badly by tall diff gears as an N/A motor... Maybe one day he can think about upgrading the rear end... A nice little 9" swap would be nice, and help it put the power down

[@JUNKYARDGTO]

Cool build I had the same problems with my air ride until I got Tapered Sleeve Air Bags

[@danielbrealey2924]

@Kris Nicholson My BB turbos I've used on my Skyline have lasted years, I'm on my 3rd Garrett- none were replaced because they were worn. They were just upgraded for bigger and better units each time (owned the car for 15+ yrs). There is no reason a BB turbo would wear that fast unless there.was some kind of problem with oil supply, imo... Maybe a cheap knock off Chinese turbo, but most are a lot better than that as well...

[@eriqrosado3337]

Wyatt from boosted boiz help with building some of this car I believe.

[@liiiinder]

Atleast its been stored some days at the BoostedBoiz florida shop

[@TJhippie420]

He helped with the fab work.

[@NNYstreetcarmafia]

A little bartleskeet, some pfispeed and boostedboiz love , a little twisted tea coke and monster and this wild machine was created gotta love the car community youtube has created

[@Itsasony]

That car on stock breaks is fucking insane and dangerous

[@maperformance]

Still pretty light... but now its stopping from must faster speeds... 😂

[@loganb5657]

Wyatt did a bad ass job fixing up those turbos

[@Bimmer2047]

I tell you one of the best suspension setups of a e30 is the h&r cup kit. No it’s not a “coilover” setup but it JUST WORKS. Full road coarse cars have been running that setup for years! I run it on my 89 i and I’ve track dayed it, auto crossed it and generally just beat the tar out of it.

[@allanpolk2681]

This is a true labor of love. Looks good, sounds GREAT, and has several mustang kills to his credit. SPICY !

[@RedPillVegan]

green tea 👑 king right here

[@bay1.charlie]

Awesome build, awesome story. 🔥

[@ayuyu1]

Brooooo. This is unreal. Just watched this video, then went to watch hoonigan’s latest video and then guess who is at the preview!!!

[@teeskyers]

I love the Arizona green tea wrap!!!

[@InfinityMotorsports]

Soon as he said it was on bags I was like... that shit wont last.. Sure enough- he smartened up. I had the same system - compressor constantly refilling ... bags tearing up.- total pain in the balloon knot

[@enlightenedidiot9552]

Definitely not my style, but that thing is FANTASTIC...

[@RayTrent01]

Should have taken us for a ride!

[@Pittsburgh-412]

Man I knew that was an Ls as soon as you started it lol. There is no mistaking an Ls

[@marcready6369]

Nice work. A lot of fun. Unique 👍👍

[@bobbihana]

Let a brotha know about those headers and bag setup when you ready 😎

[@Murph_OKC]

Awesome build!! I have a 83 e21 and this mos def motivates me to get to work on mine. I was thinking k24 with a fat turbo..

[@maperformance]

That would be sweet!

[@jeffboyer8214]

As long as you have the timing & the valve springs & piston to valve clearance you are good. Very nice ride. Be safe.

[@Lumpys_Garage]

Nice wheelie. Very cool car too.

[@iFaTeM]

Im nit gonna lie I want to build this look

[@tonykemper8896]

Pretty sweet. Can’t wait to swap my e91

[@MMOchAForPrez]

Sick build!

[@zanemahaydik1511]

1:24 pumphrey spotted

[@forrealforreal8723]

I wanna know who trades a r32 for a Miata

[@dannyjstackz8432]

That’s what I’m saying lmaooo

[@robertguzman3282]

Dope af bro 🥵💪🏼🔥

[@DavidVlogz]

Very cool 😎

[@warrensmith792]

Dopee, I'll come back to cars one day. Bikes gotta stay💪

[@jeancharlesrabaux5658]

Purée ca en France même pas la peine premier feu rouge sur le coté y love it the e30 BMW

[@rwdbalkan2059]

Dream it to do it! Nicely said, keep the spiritoo! Nice vid bro, Cheers from Croatia!!

[@tighematthew]

AWESOME

[@gagemcintyre3207]

i remember his arizona r32

[@billyforsstrom8375]

Love that car. :)

[@StLMikie]

Awesome car, but even for a stock block setup, I’m slightly surprised it’s only making in the 600hp range.

[@kempmartin]

Great video. You sound like a very nice honest guy Ryan. I also have an 87 coupe which is very close to having my LS2 dropped in with a TR6060. What did you do for the diff? Not quite as much HP, but fairly close (NA). It's nice to know it's not a handful to drive. I was a little concerned hahaha. Good job Ryan

[@kempmartin]

Also, go for a remote booster when you upgrade the brakes and mount it under the dash.

[@rickdee67]

LOVE LOVE LOVE THIS HOTROD! can i get a 1/24 scale wrap so i can have one too?!!

[@maperformance]

We'd love one too!

[@rickdee67]

What is Ryan’s last name ? I wanna hook up with the people who made the wrap so i can buy one just like it! Sorta

[@JUNKYARDGTO]

Why am I not subscribed

[@douglas4092]

Would you consider a turbo sponsorship?

[@forrealforreal8723]

How much is the car worth if it was all original?

[@Mirracobike12]

what differential

[@applebitefool]

Cam is fine, just get better Gt35s, ford 8.8 diff, m3 axles and a proper damper coilover suspension

[@senseibullish1803]

I wish I was this rich

[@ThaHammieJaassee]

Start a KZbin and make budget content till you get sponsors or high view counts

[@dayindayout93]

How many pounds of boost?

[@ThaHammieJaassee]

Probably like 8lbs he said it was only about 600ish

[@MikeOxmau]

Threw twins on it just to make 600hp???

[@kennithchapman9689]

I thought LS1 were iron n LS2 were aluminum?

[@suicidebunnyz]

Pretty much just the truck motors are iron. Some are aluminum tho. Ls1 came cars

[@kennithchapman9689]

@@suicidebunnyz Yes they are and I know Ls's came in Camaros n Vetts but I'm pretty sure the first LS1 motors made were an iron block motor...

[@suicidebunnyz]

@@kennithchapman9689 no ls1 is an iron block. They're all aluminum

[@ltnationradio8348]

Can I get someone to put my twin turbo engine in my BMW

[@StLMikie]

Where are you located?

[@berube361]

Says do something off the wall, then ls swaps a bmw that's been done time and time again lol. But good looking build though.

[@YusssoM]

I'm not an english speaker and i have poor understanding on terms like this but what is "off the wall" mean in this context? I thought it could be used for like "different than what i usually do"

[@StLMikie]

@@YusssoM you are correct. Off the wall would be something uncommon.

[@andrewwilkins7237]

That's dynamite

[@Steb12]

Talks safety Stock brakes without booster 😂😂🤦‍♂️

[@polopolo2868]

Stopped riding motorcycles because hes 29?... ok