Two-part foam to seal/insulate & replacing a HATED object. Expedition lifeboat conversion Ep112 [4K]

To HELP CHARGE ALAN'S BATTERIES for the journey north, to buy merch, and to support my videos and help them grow in scope and quality here: www.alexhibbert.com/aho
EPISODE 112
The inside part of the great waist-sealing operation has begun. Also, I'm getting on with the bow railing replacement, and trying to wangle some discounted batteries.
Products mentioned:
Leoch 210Ah Lead Carbon battery
Leoch 245Ah AGM Lead battery
Soudal Soudafoam 2K foam
6mm polypropylene braided rope
SML Epoxy High Build Primer
Feel free to ask any questions in the comments!
___
Alex's new channel, Arguably: / @arguably-alexhibbert5085
Find out more about Alex's work at:
/ alexhibbert
/ alexhibbert
www.alexhibbert.com/
His books can be bought here:
UK amzn.to/3ncQkRw
US amzn.to/2LkRs86
Canada amzn.to/2JJuwPJ
Signed www.alexhibbert.com/author
Thanks to vanguardstorage.co.uk/ for warehousing facilities.

[@clayp5129]

I’ve yet to understand how people lose interest in Alan such a story should be celebrated by everyone.

[@AlexHibbertOriginals]

Your cheque is in the post.

[@W1mp1am]

I have been a subscriber for a while, oddly KZbin has not been serving me Alan related content for over a year now... Thankfully I have gotten my Alan fix.

[@AlexHibbertOriginals]

Glad to have you back.

[@11bravocrunchie22]

Do mine eyes deceive me? A new Alan video? My day is now complete.

[@UKvet246]

Cmon make a shout out to Fogstar and get yourself a couple of their latest huge lithiums and simply do a rolling review, I'm sure they would absolutely love to have you onboard.

[@AlexHibbertOriginals]

I've bought 21700s from them before wholesale. An impressive company.

[@TheRealEtaoinShrdlu]

Lithiums would possibly require heating in those cold temperatures. Just be careful.

[@Omri.Collects]

@@TheRealEtaoinShrdluThose would definitely need heating.

[@dcallan812]

I think youtubes been skipping Alans videos 🤷‍♂ Still here we again. 👍

[@AlexHibbertOriginals]

The gods are against us once again. Rally, Alan's Army!

[@teeanahera8949]

My Alan feed has been reliable of late. All bow to Alan and the remarkable souls therein.

[@greylocke100]

Hmmm I wonder if an Alan Cam attached to his mast and setup to stream 24/7 would interest people. Maybe make it an extended perk of membership?

[@AlexHibbertOriginals]

It would mostly capture dog-walkers, and local kids trying to break in.

[@Jehty_]

​@@AlexHibbertOriginalssell it as a security measure for the shipyard?

[@LaBderErste]

I like both rails. The old was iconicly overengineered for its job, the new one just fits in pragmatically and aesteticly Awesome work!

[@AlexHibbertOriginals]

Cheers

[@teeanahera8949]

Even aesthetically.

[@hadorstapa]

Great episode, thank you, and hoping 2024 fundraising goes well.

[@AlexHibbertOriginals]

Cheers!

[@redpillgreenenergy141]

I was able to send battery support without any issues, go Alex/Alan go!

[@AlexHibbertOriginals]

Thank you! Alan shall go, when he feels like it...as ever.

[@lv_woodturner3899]

The new rail looks very strong, and the polypropylene cord is a very good addition. I may use the polypropylene cord idea on a stainless steel grab rail for the steps to the front door. My wife is not so stable going up and down the steps these days. We have just had a very cold snap in eastern PA so we need something to help with the extreme cold or heat in the summer. Instead of epoxying the ends on, consider drilling through holes for bolts and using the Nord-lock locking washers you like. Much easier to remove if something got damaged over time. This may require a machined spacer so the lock washer goes against a flat surface. I can machine such spacers, I just need dimensions. Perhaps spacers and lock washer at the head of the bolt and one at the nut so both ends are prevented from spinning. I have lots of 6061 aluminium on hand. Dave.

[@AlexHibbertOriginals]

Cheers Dave

[@KD2HJP]

Petroleum jelly will prevent adhesion of foam on surfaces

[@AlexHibbertOriginals]

The clean up would have been an all-dayer!

[@krimke881]

Perfect timing of video release =) If some fans where to meet up in the various harbour, on your journey, What would you rather have of needs. Diesel, chocolate, sealant, or Gaffa? =)

[@AlexHibbertOriginals]

Beer.

[@zwloki0]

I wish i had some time to call down and help you with the project. But for now I'm leaving few bob and comment for the youtube gods.

[@AlexHibbertOriginals]

Cheers!

[@LandyAndy62]

On you handrail - if you drill holes through the tube where the grub screws touch, you could replace them with longer bolts. You would have the security of knowing you have a positive engagement, and longer bolts would be far less likely to go unnoticed if they did work loose - but you would still be able to disassemble them if required - even it it is only to salvage the parts if you change your mind. Any old paint also makes a convenient thread locking compound 😄👍

[@AlexHibbertOriginals]

Bolting through another option. Cheers

[@Jonathan_Lippert]

With all theses batteries I hope you have/will have some good stuff against battery fire

[@talesofcanterbury42]

Excellent as ever. Thank you Alex.

[@AlexHibbertOriginals]

Cheers

[@gafrers]

Always great to see a new episode

[@AlexHibbertOriginals]

I'll take the faint praise!

[@deeznutz-bn9sl]

I’m confident that in time we will be able to build a fleet of atomic powered Alans

[@AlexHibbertOriginals]

Micro-modular fission reactors. There's a plan.

[@sailingona]

Love it :) spring is coming

[@AlexHibbertOriginals]

Cheers!

[@blackwidowrsa]

Stay with the lead carbon, better cycling

[@teeanahera8949]

Better ballast compared with LiPo too.

[@Bendjh]

Hi Alex, I see that your using spray foam, you will have a lot better control if you get the foam that fit a spray gun. Plus alot lees wastage.

[@0xKruzr]

I was going to suggest "why not use LiFePO4 batteries for much more capacity per unit mass and better charge/discharge performance," but I suppose part of your strategy here is "actually, the more mass we have at a place closest to Alan's keel, the better off we are from a stability perspective?"

[@AlexHibbertOriginals]

Lead Carbons are much cheaper than lithium and can be run just as hard, and as you say, free ballast.

[@Omri.Collects]

Your old front rail was just fine 🤷🏻‍♂️

[@BoostedMike2]

what you need is 4 x hgv batteries just dont break yer back lifting them in

[@teeanahera8949]

Sorry this is off topic but watching the little Phillips #2 bit that was waiting to grow up into an adult made me wonder if you’d thought of getting a 150mm size? Pack of 10 from reputable companies on line are quite cheap. You can then see where the pointy bit goes more easily.

[@AlexHibbertOriginals]

I can't say I've had issues with the short ones.

[@whatname4341]

What is a tool you would be in great need of now or for future projects that is under 250 pounds?

[@AlexHibbertOriginals]

What a generous question. Whilst more focused on batteries and fuel tanks at the moment, I suspect my cordless drill and driver kit is on its last legs, as the chucks are skipping.

[@MikeJones-jn2pb]

TY #1

[@thinkingoutofthebox.9421]

Wouldn't two of the bungee nets ( joined together with cable ties) behind you in the part about wrapping the pole, be better for the drone landing net as the holes are smaller?

[@AlexHibbertOriginals]

Those nets are double ply, and a much smaller area. I have custom nets in order.

[@COM70]

❤

[@MikeJones-jn2pb]

I wish I had money to help U 😮

[@AlexHibbertOriginals]

Views help too!

[@nealmacdonald8191]

Check out Ayo fishing. He bought one pf those rescue boats but hasn't done much to it yet.

[@billopad9625]

Want you to make a merch patch I can buy an then sew onto my backpack… (just a suggestion!) 👍

[@AlexHibbertOriginals]

Noted!

[@87xfute]

Hi Alex, being a dummy when it comes to lead carbon batteries, can you just fit a new battery with batteries that have been used over the past whatever years without repercussions like what happens with lead acid batteries, where with lithium you can put batteries of almost any age together without any dramas at all. I hope you understand my gobblygoop mate. Seeya Rob

[@AlexHibbertOriginals]

You should try and keep groups of batteries as matched as possible in terms of age. Obviously in charge state, size, capacity etc too. But, these have been used so gently and so little (I'm usually on AC shore) that I'm not worried. I've never deep discharged them.

[@user-uk2pc6kv4b]

Are your books on Audible? I was trying to find them!?

[@AlexHibbertOriginals]

Sadly not - there wasn't budget allocated at the time, and it's unlikely older books will get audiobook treatment.

[@user-uk2pc6kv4b]

@@AlexHibbertOriginals Ah I understand! Would you do a collaboration with Calm? They did some great "Extreme Sleep Stories" which would fit your arctic explorations vey well!

[@deeznutz-bn9sl]

I’m not sure how hard these are to come by but have you considered nickel-cadmium batteries? More energy dense than lead-carbon and less picky about how they’re charged.

[@AlexHibbertOriginals]

I don't know if you can get them in giant 200Ah+ sizes, and in terms of AA batteries that I'm more familiar with, it's seen as a pretty old chemistry. These lead carbons are brand new tech - far superior to traditional lead acid.

[@deeznutz-bn9sl]

@@AlexHibbertOriginals as far as I’m aware, Ni-Cd batteries were phased out because of environmental concerns. Which makes sense for things like AAs that could get thrown away, but since you’re already using heavy metals it’s not really a concern. Nickel-Cadmium is a very robust chemistry and i’ve heard they hold up better in the cold.

[@COM70]

@@deeznutz-bn9slthey hate the cold (even for storage)and are best suited to complete charging and complete discharging otherwise they retain a memory of the unused portion, which then becomes unusable.

[@deeznutz-bn9sl]

odd, I always heard they did well in the cold. probably best to stick with the current chemistry anyways@@COM70

[@FenderSan]

i don't hate the composite rail :(

[@AlexHibbertOriginals]

Ah, well I'll pass this news along - the rail will appreciate it.

[@whatname4341]

I want to buy a signed set of your books. Could you do that for a bit of money towards batteries and fuel?

[@AlexHibbertOriginals]

Sure thing: alexhibbert.com/author

[@PinkLittleElephant]

I'm still confused about how you will deal with humidity in this super insulated boat. Even with a crew of 3 or 4, just breathing will put moisture into the cabin. Add to that spray from the outside or wet clothes ....i know these boats were designed to keep dozens of people safe inside ... but not comfortable and not for long.

[@oldman1944]

Normally you would use a dehumidifier but in the arctic he might be better served with a heat recovery system that brings in small amounts of external air through a heat exchanger. The outside air will be super dry.

[@AlexHibbertOriginals]

We have two vents for extractors or controlled air intake, and also a low wattage dessicant dehumidifier.

[@benderbender1233]

✌😎✌

[@louisfkoorts5590]

👍🏻👋🏻🍎

[@neilgower2558]

Tryed to send you some money but its not having it sorry

[@AlexHibbertOriginals]

Oh! Thanks for trying. There's PayPal on the webpage there too if Superpay is being difficult.

[@DumfriesDik]

I really enjoy watching your videos thank you. I've bought some ampage and I look forwards to seeing it being used in anger. Best wishes to you and yours.

[@AlexHibbertOriginals]

Angry batteries - now there's a video concept...