Great video. Just a couple of tips for your viewers from the current "curator" of this process for the past 5 or so years on AVS... Basic Combed Cotton does work well and is a low cost option, however if someone has a few more dollars to spend, Performance Knit offers deeper colors and even better acoustical transparency to let the insulation do its work. Speaking of insulation, using a rigid style acoustical insulation like OC703 or some similar product means no need for all of the "webbing" to prevent the softer insulation from bulging out the front. Rigid insulation also offers a better broadband (wider frequency range) performance for the panels. By using rigid insulation you can also put the insulation close to the printed fabric and leave an air gap between it and the wall.. This effectively improves the performance of the panel, particularly in lower frequencies, and the air is free. Lastly, you are spot on that a lot of movie posters are around 24x36 in size, but more importantly that they are in a 1:1.5 ratio. If using 24" wide insulation, and a frame made with 1x__ lumber (1x4 for example which is 0.75inches thick), I recommend making the image 25.5" wide and to keep the 1:1.5 ratio, 38.25" tall. That way you can more easily fit the 24" wide insulation inside the width of the frame without having to trim it. This again is really important when using the higher performance rigid insulation. Nobody should take these comments as ripping this video apart. I worked closely with Kyle from Life of Bliss on his video using the AVS method, and we agreed that for simplicity sake, some details or specifics were left out. I just want to point to some options to take these even to the next level of awesomeness. Again. Great video!
@TwoGuyzTech4 жыл бұрын
Thanks for the great information Nick! We really appreciate you taking the time to come over and share a lot of the important details we didn't mention in the video. You've done a fantastic job helping everyone out on the AVS Forum thread (including us!) - keep up the great work! Again, thank you so much for taking the time to come on over and watching the video. I went ahead and pinned your comment at the top of the comments section. 😀
@nickbuol3 жыл бұрын
Curtains are one of the WORST ideas in soundproofing right up there with cheap foam squares stuck to walls. Curtains have been proven time and time again to be poor "soundproofing technology." Maybe you get "25dB tested" reduction at a specific frequency range, but that would be fairly limited in range, even with the thickest and heaviest curtains on your list. I mean even logic states that you can't replicate a fully decoupled room, with 2 layers of heavy mass drywall, and an isolating fluidic material like Green Glue by just hanging a curtain. If you could, then everyone would do that because it would be cheaper and easier. Sure, you might impact some clap/slap echo in a room, but that is internal acoustics more than soundproofing, and still a bad idea compared to broadband absorption panels or other acoustical treatments.
@blackbird1043 жыл бұрын
I wish I had read this before I adjusted all the images. I was getting a bit nervous about all the webbing, this solution is on point. Definitely needed the video for the steps for prepping the images though.
@Roshean473 жыл бұрын
Ok this sounds like a great solution/improvement on this tutorial so we don't need to mess around with string and staples by going with the rigid panels. Just one question though would you use the 4" thick type or the 2" thick?
@nickbuol3 жыл бұрын
@@Roshean47 4" rigid insulation (or any acoustical insulation) will allow these broadband absorber panels to handle more lower frequencies, but they do stick out from the wall quite a bit and don't always fit the decor and the 4" material can be expensive. Another option is to build frames out if 1x4 lumber which is 3.5" deep. Put the rigid insulation near the outside "poster" printed fabric, and then you have a 1.5" air gap between the insulation and the wall. This "free" air gap will boost performance of the 2" insulation. In fact a piece of 2" OC703 insulation with a 2" air gap behind it performs similarly to a 4" piece of OC703 but is using free air. Yes, the 4" is still better, but the cost difference makes it hardly worth the 4" price.
@ghambino12 жыл бұрын
you guys are so awesome for posting this video and showing us the way on how to create acoustic panels. I just ordered my first one today.
@TwoGuyzTech2 жыл бұрын
Glad it was helpful! We hope you enjoy the panel & thanks for watching :)
@BuildMontage4 жыл бұрын
Nice work guys. Awesome tutorial Logan, and Rob, well done, really nice job - like how you rounded the backs with a router.. I never thought to do that!
@TwoGuyzTech4 жыл бұрын
Thank you so much Tony! Your panels look fantastic too! - for anyone who's reading down here, make sure you watch Tony's acoustic panel movie poster vid as well as he has a bunch of fantastic information. kzbin.info/www/bejne/Zp_EdISqgdRqmJY
@BuildMontage4 жыл бұрын
TwoGuyzTech thanks guys. Your job was far more thorough and planned out than mine. The string to hold the insulation back was genius. It’s funny when I did mine I hadn’t seen Kyles video or been on the Avsforum. I got the idea for movie mania because I was using it to pull custom thumbnails on my Plex server and saw how awesome they were so I went that way! Either way, I hope this vid gets a tonne of views as the effort and end result are amazing!
@TwoGuyzTech4 жыл бұрын
@Build Montage Thanks again Tony! Your posters still looked amazing. You've been a huge inspiration to us and we're glad to have you as such a good friend! Keep up the awesome work! 😀
@nickbuol3 жыл бұрын
Curtains are one of the WORST ideas in soundproofing right up there with cheap foam squares stuck to walls. Curtains have been proven time and time again to be poor "soundproofing technology." Maybe you get "25dB tested" reduction at a specific frequency range, but that would be fairly limited in range, even with the thickest and heaviest curtains on your list. I mean even logic states that you can't replicate a fully decoupled room, with 2 layers of heavy mass drywall, and an isolating fluidic material like Green Glue by just hanging a curtain. If you could, then everyone would do that because it would be cheaper and easier. Sure, you might impact some clap/slap echo in a room, but that is internal acoustics more than soundproofing, and still a bad idea compared to broadband absorption panels or other acoustical treatments.
@L3x4Pr0ne4 жыл бұрын
Great tutorial. I appreciate you took the time to go through the poster download steps as well as the re-upload steps to the fabric site. These details are always glossed over. Nice job guys
@TwoGuyzTech4 жыл бұрын
Thanks for watching! We're glad you found it useful! 😀
@TorinTPG4 жыл бұрын
3,000 staples...now I know how your arms are so ripped!! Enjoyed this video. These turned out great. You guys were much more professional in building your panels than myself. I flew by the seat of my pants and got lucky that they turned out as well as they did. I used the Eagle z-clips that you guys used - very nice. Lots of great b roll footage on this one too!
@TwoGuyzTech4 жыл бұрын
Thank you so much Matt!! 3,000 staples a day keeps the doctor away... or so I'm told. 😂
@pierrecastanets19744 жыл бұрын
Nice work. Suggestion for next time: building and tuning a BOSS platform
@TwoGuyzTech4 жыл бұрын
Cool idea! Maybe some time in the future... they'd compliment our bass shakers pretty well!
@pierrecastanets19744 жыл бұрын
@@TwoGuyzTech I never had shakers to compare but I'll say the BOSS is easily one of the best per dollar upgrades in my theater.
@BradleyAshley4 жыл бұрын
Very clever guys, I love it. Thanks!
@TwoGuyzTech4 жыл бұрын
Glad you enjoyed it! Thank you so much for watching! 😀
@BuildMontage3 жыл бұрын
This video needs more views... seriously... come on YT Algorithm!
@TwoGuyzTech3 жыл бұрын
Aww, thanks Tony! 😂Let's hope YT pushes this more at some point! ❤
@blackbird1043 жыл бұрын
ha, several views are just me making sure I have all the steps right!
@LifeofBliss4 жыл бұрын
Those look GREAT! You guys did an awesome job, both on the posters and the video. That movie reel poster is a cool idea! Nice to see some more DIY theater stuff. Appreciate the shout out as well!
@TwoGuyzTech4 жыл бұрын
Thank you so much for the kind words, Kyle! As we said in the video, you & your video were HUGE inspirations to us. We love your channel, keep up the amazing work!
@viperdriver894 жыл бұрын
Been waiting for this! 👌🏻👌🏻
@TwoGuyzTech4 жыл бұрын
Thank you so much! It was a pretty fun project! 😀
@nickbuol3 жыл бұрын
Curtains are one of the WORST ideas in soundproofing right up there with cheap foam squares stuck to walls. Curtains have been proven time and time again to be poor "soundproofing technology." Maybe you get "25dB tested" reduction at a specific frequency range, but that would be fairly limited in range, even with the thickest and heaviest curtains on your list. I mean even logic states that you can't replicate a fully decoupled room, with 2 layers of heavy mass drywall, and an isolating fluidic material like Green Glue by just hanging a curtain. If you could, then everyone would do that because it would be cheaper and easier. Sure, you might impact some clap/slap echo in a room, but that is internal acoustics more than soundproofing, and still a bad idea compared to broadband absorption panels or other acoustical treatments.
@BigRedGamer873 жыл бұрын
They look great! Definitely will try this out one day
@TwoGuyzTech3 жыл бұрын
Thank you very much! We are very happy with the way these turned out, they look even better in person. Thanks again, and have a great day! 😀
@hstudio304 жыл бұрын
Awesome vid champ!
@TwoGuyzTech4 жыл бұрын
Appreciate it! It was a lot of work but we feel like it paid off! 😀
@percybedford62664 жыл бұрын
Great vid, I will do this for my theater. Thanks for sharing.
@TwoGuyzTech4 жыл бұрын
Glad you enjoyed the video! Thanks for watching! 😀
@percybedford62664 жыл бұрын
@@TwoGuyzTech no problem
@SpecOfTech4 жыл бұрын
Great informative video guys, nice work.
@TwoGuyzTech4 жыл бұрын
Thank you so much Barrett! Glad you enjoyed it! 😀
@joepacheco79796 ай бұрын
Great idea! I’m gonna give it a shot. Was there any copyright issues you encountered when ordering the "canvas"?
@TwoGuyzTech6 ай бұрын
Thanks for watching! We didn't run into any issues at the time of making this video.
@brianwood153626 күн бұрын
For the panels that are bigger (31 by 60), how are you able to get them printed on material that is a standard yard of 36"? Wouldn't you need 4 to 5 inches on each side to wrap the material around the frame?
@Scorpiokills Жыл бұрын
thats hoootttttt
@hollymikestakeon...64383 жыл бұрын
Exactly what I'm looking for ! Awesome. Now if I make the panels the same size as the installation bats 15.25" x 47" will that distort the pictures too much?
@TwoGuyzTech3 жыл бұрын
Thanks for watching! Yes, if you scale the images down to that size, it will impact the way the picture looks.
@Ocho8172 жыл бұрын
When I try to make the border color black its making the entire image black. Trying to figure out what setting to change, any help?
@adamfritzsche3 жыл бұрын
Great video. I have been meaning to do this myself for a while, but just haven't gotten around to finishing the theater.... to busy using it as is, lol. Anyway I love the idea with the move reel strip, and I think it would be perfect for an area I need to cover/hide. You mentioned in the vid that you did a separate one on that, but I could not find it. Did you ever do one, or have some details? Thanks.
@TwoGuyzTech3 жыл бұрын
Thanks for watching! The movie reel posters are great. The tutorial video is available here; kzbin.info/www/bejne/boOmqmxtYrKBoMU hope this helps!
@valdeze4 жыл бұрын
Thank you do much. I'm definitely making some of these. I just have one question, I kind of like the look of actual movie posters. With the movie and actor names. is there any website that you know of where I can get those images in high resolution? Or is that some sort of copyright infringement?
@TwoGuyzTech4 жыл бұрын
Hi and thank you for watching! I think if you Google high res movie posters there should be a lot of choices available with text. There shouldn't be any issues with copyright.
@desoultaker3 жыл бұрын
Very Awesome video! I've been looking for that Lords of the Ring pic you have at 19:05 of your video but can't seem to locate it. By chance can you list where you got it? Willing to send it out? If not, understandable.. Thank you!
@TwoGuyzTech3 жыл бұрын
Thank you very much for watching! The photo is available here; www.moviemania.io/wallpaper/dm3c478d-the-lord-of-the-rings-the-fellowship-of-the-ring Hope this helps! 😀
@myrlc46234 жыл бұрын
Great Video Much Appreciated!! Questions once I set my border my photo went off center how do I re-center my photo?
@TwoGuyzTech4 жыл бұрын
Thanks for watching! You should just be able to hit CTRL + Z to undo whatever action got your photo uncentered. If that doesn't work, you might have to start the process in Paint.NET again.
@bg44066 ай бұрын
Did you put LED lights behind poster?
@markknipstein53063 жыл бұрын
I noticed in the beginning of your video you have a panel that is horizontal instead of vertical. Can you show us how you did that?
@wildman2009jesse2 жыл бұрын
I ordered 4 designs each is 24x36 I'm going to use 1x4 pine boards what size do I need to cut my boards at? Thanks and great job on making these
@TwoGuyzTech2 жыл бұрын
Thanks for watching! I would cut the sides to 36" and the top/bottom pieces to 23". This will give you an outer dimension of 24" x 36". And of course, the 23" pieces go between the 36" pieces.
@wildman2009jesse2 жыл бұрын
@@TwoGuyzTech thanks for the info I appreciate it. 1 other question if I wanted to have designs 27x40 do I keep it at 150 pixels per inch or does everything change for the size you want?
@ozzieroxs3334 жыл бұрын
GOT !
@KayoticGear Жыл бұрын
Do you also make and sell completed poster panels or know of a place that takes orders? Thanks!
@Eurica763 жыл бұрын
Can you please explain the correct way to use MovieMania Desktop posters(sideways posters).....?
@danfescenmyer2934 Жыл бұрын
Looks awesome could you please send me the file for the movie film poster you made so I can make it?
@CynsCorner3 жыл бұрын
What if you are going to hang your panels horizontally and need a horizontal image but the resolution isn't as high as the one you downloaded in this video?
@TwoGuyzTech3 жыл бұрын
Depending on the size, if you're going to be building posters similar to the ones we built, you're going to want to stay as close to the suggested resolution as possible, or it'll start looking grainy/blurry. Thanks for watching!
@CynsCorner3 жыл бұрын
@@TwoGuyzTech I'm looking at 4x2; what size were yours? I can't remember if you specifically mentioned that.
@TwoGuyzTech3 жыл бұрын
@@CynsCorner The big posters we hung on the sloped ceiling are 36" x 60", and the ones we put on the back wall are 40" x 25". The same resolution was used on all of the posters, but you can tell that the posters put on the 36" x 60" posters aren't quite as clear as the smaller ones, but they still look great.
@CynsCorner3 жыл бұрын
@@TwoGuyzTech Thank you for the info!
@CynsCorner3 жыл бұрын
@@TwoGuyzTech Quick question: would setting it to 300 instead of 150 make a lower-resolution original picture any better?
@mknowles0044 жыл бұрын
This is really great. Thanks for sharing. I may have missed it, but is there another video / description of how you put the collage poster together? I saw the curved frame, but sounded like there were separate instructions on how to create the image. Thanks!
@TwoGuyzTech4 жыл бұрын
So sorry! Looks like we forgot to get the link up. We'll try to have this done in a couple hours! Thanks for watching!
@TwoGuyzTech4 жыл бұрын
Uploaded the tutorial video here; kzbin.info/www/bejne/boOmqmxtYrKBoMU Thanks again for watching!
@corylarson29712 жыл бұрын
Is there a reason you use 150dpi rather than a higher resolution?
@TwoGuyzTech2 жыл бұрын
Thanks for watching & sorry for the slow response! We used 150dpi because we're upscaling the photo anyway, so in reality the true DPI of the image is a lot smaller than the 150dpi minimum. And to us there was no point in making the file bigger than it had to be.
@kev70172 жыл бұрын
where can i get Movie posters with the title to use for my acoustic panels?
@mauriciogomez38692 жыл бұрын
Which is the actual insulation size for your posters, is it 22”
@marierasmussen77992 жыл бұрын
OC703 is $34 a 2x4 sheet. Other options?
@bladwin321 Жыл бұрын
any new site i can print fabric like this= The site is down
@michaelbox6007 Жыл бұрын
yeah, I've been trying to access the site, but it is coming up as a security threat.
@535isbimmer Жыл бұрын
site is down?
@marierasmussen77992 жыл бұрын
I followed you advice with size and everything. I am adding a black border as mentioned in your video. I have it set to flood mode: contiguous (default), Fill: Solid (default), Tolerance: 50% (default) and everything else as the default matching the video. However, when I pour the bucket on the white border it actually affects (fills) part of the image as well. What am I missing? (avengers-infinity-war). Paint.Net v4.3.10
@bingbay1992 жыл бұрын
Having the same problem.
@marierasmussen77992 жыл бұрын
@@bingbay199 I figured it out. I will post shortly when I do another.
@RuppertsReef3 жыл бұрын
Any chance you could email me the file/template for the movie reel one