I Wish I Had Done This Sooner! - MagicFour Gas Can Vent

[@riflebear1711]

I also absolutely despize those subpar gas caps with no vents. Buying one of these vents. Thank you!

[@zooyl4110]

Thank you for providing such an excellent video, which has helped gas can to increase the flow rate significantly.

[@andrewvickers4487]

I'm liking this o-ringed metal version over the plastic one, worth a try. If the rubber doesn't hold up then I might try a 'pops-a-vent' which I just learned about, which you can install with a sealant for a stronger seal.

[@kevinbstovall]

Hi Ben. Agree those safety spouts are a hassle. I got around it with the SureCan 5 gal. Gasoline Can, model SUR50G2. Thanks for all the good tips.

[@txtoolcrib]

Those are exactly the models I carry on the job trailer.

[@zooyl4110]

SureCan 5 gal is a great product.

[@dogsbyfire]

Very useful info. Thank you!

[@willb3018]

While not as elaborate your demonstrated model, my frustration with new cans flow led me to a cheaper plastic venting alternative that so far has worked fine to increase flow. It is very similar to vent on the first ever plastic can I bought 45 years ago that still works fine. I bought a couple of No Spill cans for a particular use and they flow fine as is. My frustration with No Spill is filling the darn things. They have something called a flame mitigation device. To me the only thing it mitigates is the rapid fueling of the can. That's an easy fix too. Just yank 'em out. I am on the dark side of 70 and never saw a fire filling a gas can.

[@zooyl4110]

No Spill gas can is matter.

[@aaronmcclain1279]

Hey Ben .there has been some videos of a DIY hack of using a valve stem and just taking the core out . But the unit you have here is pretty sweet .

[@txtoolcrib]

I hadn’t seen that hack before. I’m good with it no more than with these things cost.

[@aaronmcclain1279]

@@txtoolcrib . I agree . I didn't mean anything was wrong with what you bought . Ben keep up the good videos

[@zooyl4110]

Replacing a valve stem is actually less expensive. The only issue you need to consider is switching to a fuel-resistant o-ring type.

[@FromMetayou]

I use the valve stem hack in my metal Gerry cans works a treat

[@lukestrawwalker]

You can get metal tire valve stems at Walmart as well and they work great, same thing, even comes with a metal cap with rubber seal ring inside. Tried using regular "rubber" tire valve stems but they dissolve in this crap gas they sell now. The metal valve stems have better seal rings that hold up to the gas. I cut a piece of wire about like that around 3 feet long and slide a small nut over it, then slide the end of the wire through the nut again and loop it tight with the nut in the middle of the wire, makes it easier to thread through the holes... slip the stem over the wire after removing the valve core from it, feed the wire through the fill hole and out the stem hole you drill, pull the stem into place and put the nut on, and the remaining end of the wire should still be sticking out the fill hole so easy to pull the wire right back out of the tank. cap and done no valve core needed.

[@futureboy40]

Good idea! I thought i had to mount the vent next to the opening!

[@pnmholdings4635]

Used this vent on a harbor freight Jerry Can by Midwest industries. Best setup now and will last my lifetime.

[@FromMetayou]

I've just added a car tubeless tyre valve with inner valve removed in my Gerry cans works a treat

[@railroad9000]

I have been using a battery powered transfer pump for some time now! Much easier and with the heavy 5 gallon cans no more lifting and holding while dispensng fuel!

[@03bullseye]

Any idea the size of drill bit this takes. I already have holes in my cans that are sized to rubber valve stems. I can’t go any smaller.

[@Jeffrey-t8g]

If the knurled cap was longer and had small holes drilled in the upper portion, wouldn't have to take cap off, just loosen and back off to vent through cap side holes.

[@cabbyhubby]

Tire valve works excellent, just take the core out.

[@zooyl4110]

You are right. Replacing a valve stem is actually less expensive. The only issue you need to consider is switching to a fuel-resistant o-ring type.

[@silverthunderbird]

How are the O-rings holding up after one year, to the ethanol in the gas?

[@txtoolcrib]

Zero issues, other than my brother stole it from me and it is currently in the back of his truck running back-and-forth between oil rigs.

[@1kzrider]

Nice upgrade would be even nicer had they put a piece of wire attached to the cap so can loosen and not drop or loose roll off into that blackhole like a 10mm socket lol

[@llanbull]

I was looking for diagonal cutter reviews and I remember your channel and see if you did any. You only did bolt cutters. Any plans for diagonal cutter video in the future? Maybe a twin force knipex.

[@pstgh]

I want to replace the silly plastic vent caps that are on my cans with these but NO WHERE in any of the instructions nor in the videos of these MagicFour caps does it say what size hole you need???

[@Pippinm7]

Awesome, Tie some dental floss to the wire on the inside and it will be easier to pull out the wire

[@hackleberrym]

This may be a stupid question, but can't you just use the gas can without this attachment and use a funnel in the mower?

[@txtoolcrib]

Not that style.

[@mshum538]

Yes, funnels were around long before these Epa spouts came along , good question…

[@jermlac]

Did you pull the white flash arrestor sleeve out to get that through the neck, or just drill a hole in it?

[@txtoolcrib]

I pulled it out.

[@zooyl4110]

I believe you must remove it before installation. If you're searching for a quick way to install it in 10 seconds or less, I recommend the ZOOYL Air Ducky gas can vent.

[@wapatodave]

I’d tape or lash a line to the bent end of that wire so I wouldn’t need to fish it back through to remove it.

[@JamesReedy]

Looks like a gutted Schrader valve.

[@BackyardEngineer334]

Do yourself a favor & get the Eagle 5 Gallon Red Galvanized Gas Can with the funnel that attaches to it, there’s not a better 5 gallon can anywhere.

[@txtoolcrib]

I carry that style for the work trailer. They are fairly expensive for a gas can that I may use at home three times a year though.

[@BackyardEngineer334]

@@txtoolcrib I don’t use’em much more than that myself but it’s worth it to me to never have to worry about them turning over during transport & never spilling a drop when filling my lawn mower up, I got 2 of em’ I keep ‘em’ locked up cause I had one walk off a couple years ago.

[@zooyl4110]

Eagle 5 Gallon Red Galvanized Gas Can is a great one.

[@Johnny53kgb-nsa]

Do these also work on the Eagle metal gas cans? Thanks

[@Thelawnmower278]

Bad spill 4:38

[@orion310591RS]

5:39 Rubber seal for gasoline? That should not last for long. I think gasoline will eat it fast.

[@micahned]

Likely nitrile o rings

[@zooyl4110]

You are right.

[@alphwinter3913]

I am sure your viewers are smart enough to know this, but it goes without saying...Empty the gas can completely first!

[@georgemanley6421]

Its just a dumb idea they took a design that nothing was wrong with and modified it instead of making it better they made it much worse

[@futureboy40]

No they just wrecked it for the whole world because one person probably got hurt and sued someone. 🤦