Orbit Professional Mist System

Orbit Professional Mist System - Should you buy?

Рет қаралды 40,857

Күн бұрын

Пікірлер: 38

@FourthWayRanch 5 ай бұрын

If you read the product info you will see orbit professional series uses the 160 psi pump. The other stuff they sell has a tap source image.

@docfaceful 2 жыл бұрын

Thanks .puting mine up now.simple version.basically after watching a few videos. I'm going for the assortment of hights on the line so people can out of the spray,without moving much.these do feel great but can get a little rainy, so trying to not give them too much r ain.thanks

@joejoe-lb6bw 4 жыл бұрын

Great video and explanations! Now I have to find a video that shows how to build a wall.

@buildersedge888 3 жыл бұрын

Hi Tyler. Great job on this video my friend. Very informative and I like the way you did the edits...espcially cutting the zip ties. It's supposed to be 113 degrees in Medford, Oregon tomorrow. I think the Mist System you described would be a nice addtion. Thanks again for taking the time to do this.

@TylerPeck 3 жыл бұрын

I appreciate that!

@fostersteele5825 3 жыл бұрын

Bought one and every joint leaked! Threw it out and went with pvc, much better and last longer.

@onieyoh9478 3 ай бұрын

Do you/furniture get wet or does the vapor basically just instantly evaporate?

@apanda4204 3 жыл бұрын

Can you show the filter you added and how it hooks up?

@MrCapano 5 жыл бұрын

Looks good and it looks like it works good job!

@mamerc4128 3 жыл бұрын

system leaks so bad using the Orbit Arizona Pump. I have called Orbit and was told it would be OK to change the poly to a 3/8 OD copper line every 2 feet. (Hmmm? I just might do that) Works better but when the pump is turned on 3 connectors still fail. Why doesn't someone just come up with a "Compression" T setup? I was forced to use a 3/8 splice at the first connector with copper on one side connected to the poly. Orbit, you have to know of this failure.

@kdunlap3289 4 жыл бұрын

What is the total length of your hose in the kit?

@kdunlap3289 4 жыл бұрын

Can I use a soaker hose around the railing of my deck?

@jiHad2017 4 жыл бұрын

Great video! One quick question, did you ever wind up buying the pump as well? I have a similar application that I was thinking about using it for but was torn on if I would need the booster pump or not. Was wondering what your thoughts would be now that you have had it for a year.

@donsherpa9833 4 жыл бұрын

I live in sunny at pete Florida. Just installed mine and the water pressure is too low where I live (30-40psi). Therefore the regular water pressure off the spigot is too low and the “mist” is not fine mist to a point where it gets everything wet instantly including myself. Did some research seems it needs more pressure, the more psi the finer the mist. I just purchased an orbit 160 psi booster. Great reviews and can’t wait to try it out. I think it should solve the problem. Seeing this video he could use a booster to get the spray controlled and longer.

@anthonyfletcher8053 4 жыл бұрын

Don Sherpa howd that pump work out Don?

@donsherpa9833 4 жыл бұрын

Anthony Fletcher it works great! Def a significant change in pressure. The mist is much finer than before. Dispersion is a lot more significant as well. You can literally here the difference between regular spigot water pressure and the booster pump, meaning you can hearThat “pshhhhhhhhhhhh” noise if it makes sense. Sad that most of these amazon reviews on misting nozzle kits don’t mention the booster pump, in my opinion it’s useless without it. Good luck hope this helps! I might post a video on it in the near future.

@oldman9916 4 ай бұрын

There is no measuring temps after you turned the system on

@speway 4 жыл бұрын

@ 11:58 it was absolutely hilarious. It was time lapsed and the one thing that remained consistent was wife ass in a chair. It was time lapsed lmao!! Thumbs up!

@melreyes7237 4 жыл бұрын

Thanks, guy! Helpful.

@BrandonMitchell84 4 жыл бұрын

I just installed this and 2 of My fittings leak and the main hose inlet leak :( i have tried push it back in and it just seems to leak

@openthebox1382 4 жыл бұрын

Same

@oldpilot920 4 жыл бұрын

Mine too. Anyone found a solution. I tried tape, yeah rather a stupid idea. Thinking of trying silicone around the end, and then pushing it in?

@oldpilot920 4 жыл бұрын

Really sorry we didn't go with a higher quality system.

@openthebox1382 4 жыл бұрын

@@oldpilot920 Yep, same :(

@williamwatson8796 2 жыл бұрын

Why Not Simply Use Krazy Glue, or a Mixed epoxy , just a fine coat before You assemble the Mist connectors / where the Barbs Go into the House... It won't Leak, and it Won't come apart, and the Nozzles will be Secured in the Spraying Direction You Like Most..!! Just Sayin ... BillinL.A. 7-15-2022

@NatarajanGanesan 3 жыл бұрын

Is it possible to take the end plug out? I bought an extension kit after I plugged it in.

@TylerPeck 3 жыл бұрын

Yes, I believe you can take the end plug out.

@therealchrisrauch 4 ай бұрын

You da man. 🎉😅👍

@RJ42997 Жыл бұрын

Did you stop making videos?

@TylerPeck Жыл бұрын

Yeah, Life got busy. I haven't made one for a while.

@RJ42997 Жыл бұрын

@@TylerPeck totally understand that! Hope all is ok your way. Totally enjoyed all of your past videos!!

@edg.2676 4 жыл бұрын

nice video, but THIS SYSTEM SUCKS!!!!!! total garbage- three of the six nozzles on my brand new system do not work. 40 minute wait on customer service phone so I gave up.