Rebuilding Toyota Hilux 2nd Engine- Toyota Hilux Engine Restoration |

Rebuilding Toyota Hilux 2nd Engine- Toyota Hilux Engine Restoration |

[@vlad_s]

Ахренительные динамометрические руки!!!!

[@user-sn5yz2of2z]

Всё как на заводе Toyota 👍 очень понравилась фрезеровка плоскостей.

[@user-wj5ow3ne6e]

Не не так у нас на заводах изготавливают что КамАЗ что Жигули

[@dedaKuzya]

@@user-wj5ow3ne6e если бы жигули так делали они бы надежней были

[@ombidho1]

This comments section has proved to me just how sheltered and protected many westerners are. In the global south, more so in SE Asia and Africa, this how workshops look like. I was born and raised in Kenya and my dad used to disassemble and reassemble the engine on his Peugeot 504 wagon, and put it back together, without torque wrenches, steel capped boots, or helmets. All done in a weekend and ready to take us to work and school on the following Monday. Of course he used to send the heads elsewhere for machining but that was about it. All he had was very basic and analogue equipment. That 504 ran for nearly 35 years and he loved it and so did I. He knew it like the back of his hand. I too learnt to work on it by watching him do it. Sometimes he had to improvise tools because the actual tools specified by peugeot either could not be found in Africa or if they did, they'd break the family budget. Same with spare parts, he used to sometimes take donor parts from other models and then modify them to fit that peugeot, coz to get originals, one had to import them from France at expensive prices. That 504 ran for nearly 35 years until I bought him a late model toyota coz I figured he was getting too old. Even then he still didn't want to let go of that 504 wagon. It's still parked at his place and it still runs.. I wonder how some of you would survive if we somehow had an apocalypse and all modern day luxuries were knocked out of commission i.e no electricity, no sophisticated equipment, no fancy electronic gadgetry. All modern tools are good and they greatly simplify the work and make it safer, but many people cannot afford them especially in Africa. Heck many people don't even use hoists to lift engines out of the car. So, think about it before you somehow conclude the the guys in this video are unskilled or somewhat primitive just coz they are working with sandals or aren't wearing overalls or they aren't using torque wrenches or other fancy gear that you keep in your heated/air-conditioned garage. There is a big wide world away from Europe and America...

[@MachineGunJelly584]

I guess there was a reason why he had to rebuild the engine so often…

[@ombidho1]

@@MachineGunJelly584 You're talking about an engine that was designed and built in the 1960's buddy. That's when they started building those 504 engines. Matter of fact, the last one was built in 1980. Show me any car from the 60's to 70's that didn't require any major rework. They all suffered from rust, misalignment issues, lose engine tolerances and clearances, carburettor issues, oil consumption, sludge etc, just to name a few. Even the Datsun that your grandparents drove in the West suffered this, so yes vehicles and engines from that era needed constant rebuilds. Infact engine rebuilders actually found themselves rectifying defects from the factory. Ever heard of the Leylands in the UK, or the Holden Camiras in Australia?? Go read about their build quality and then get back to me. Whatever it is, you think you're saying in your comment is in reality an irrelevant and frankly based on a lack of awareness of how engines were built back then... I noticed you also conveniently missed my point about that car running to this day. It wouldn't be running without my dad' ingenuity in keeping it running all the way to 2022..

[@snarkybuttcrack]

I think you'll find most of the comments are supportive even if critical of the working conditions. What impresses me the most is how well they work together as a team, with mutual respect and affection, something sadly missing in the west.

[@vovyho]

Авто сервис ИгорЁк - качество не их конек 😂

[@user-dy4qk7tk5l]

После коллективной разборки,собрать двигатель,это класс!

[@joseantonionunez8252]

Buen trabajo en equipo... Y más gusto ver qué todos trabajan y los jóvenes se van enseñando... Buen maestro y buenos futuros mecánicos.... Ojalá y tuvieras el vídeo de cuando ya queda terminado el trabajo... Saludos desde Guadalajara México

[@marythoalvarez7996]

Eso que decis esta bien en parte. Pero se estorban y molestan entre ellos. Mejor hacer entre menos cantidad, dos como mucho y sale mas rápido el trabajo

[@tedmccarthy2982]

It's amazing how no one seems to be missing any Toe's. I've been a mechanic for Forty years and without the steel Toe caps I'd be definitely missing a few now.

[@stephanelouvet1113]

They work on the ground. If something falls, it doesn't fall from very high😄 . But still ...

[@RamKumar-vx3mn]

@@stephanelouvet1113 q-

[@ilyaskhan4082]

Please support

[@MegaDivertisment]

monkeys😄😄😄

[@thepubliceye]

You are a lot more careful in sandals and they don't use alcohol.

[@PILOTabcdce]

Богдановым это смотреть нельзя-сразу инфаркт)

[@savesl4200]

No safety shoes, no safety vest's, no gloves, no torque wrenches no EPA bs, one of the best Mechanics in the world. They'll make anything work👍

[@user-sq2hg7nh9u]

Best mechanics? When did it happen?

[@savesl4200]

@@user-sq2hg7nh9u According to videos it's ongoing.

[@mattdomenic4814]

These guys are pretty good at what they do. At first I didn’t think they were going to clean the block, then it looked great! Great teamwork too!

[@blk77sunshn]

You can tell who's rebuilt engines and who hasn't in the comments section of these videos. ( that's not a compliment by the way....)

[@jaydawg3031]

Your comment shows you don't know much about car engines or how to fix any car parts. There's many things wrong in this video, but we just have to respect because they don't have proper equipment and knowledge.

[@user-gq2jp5cz2p]

Забыли проверить завезти двигатель 😂🤣🤝👍😉

[@exxon5798]

Истинно ручная работа👍👍👍

[@user-rf7gp1ps5x]

Мастерская K Power в Пакистане

[@trieutonlu9424]

good job to see you guys working so hard it's amazing 😘😘😘😘👍👍👍💖💖💖💖

[@saeedanwar5815]

I had a 2 litre diesel engine fully rebuilt in pakistan when I was living there in 2009 total cost including parts and labour £180 ran beutifully for 3 years then I sold the car..

[@hansapanza1]

You live 100% in Birmingham paki

[@brianschott8162]

These guys did a pretty damn impressive job on the rebuild, although I'd love to see them add a torque wrench to their collection.

[@BeVe-iu2mj]

That would mean they'd have to look up the torque specs and ain't nobody got time for that

[@user-kw2fk5ou4y]

...кувалда ; - в дефектове при разборке , - лучший эксперт

[@Aremad30]

@@BeVe-iu2mj that's means lazy . just look at the torque specs is not the hardest thing to do

[@garysingh3760]

and power tools

[@hordesoflocust]

any they never seem to have a simple engine stand

[@user-ot2gb6ut9c]

Молодцы ребята!К нашим приедешь станки манки все есть,а работать не могут.Молодцы без лишнего движения!

[@user-rk4bl7ek6q]

Так смотри какие двс от них приходят, просто песня.

[@Danial3w]

33:20 Who needs a torque wrench when you have kid, teenager and dad 😂

[@CoberRuger]

true

[@zutyuf]

Viszont van tapasztalat! Az többet ér mint egy nyomatékkulcs.

[@Hardy_H_H]

perfect 3 step torqueing, 30-60-90 pound feet. Kid-teenager-dad 😂

[@DannyBoyGhost]

Yup that buck testosterone comes in with the clutch haha

[@horstmuller7512]

Fantastic tolerances! All are less then 2 fingers.

[@veram.2460]

If some spacing is more than two fingers - knock one of fingers with a hammer - it'll swell and will be tight!

[@observer8556]

@@veram.2460 You are amazing! must be part of this rebuilding team!😂😂

[@antonb2507]

Смотрю на всё это и думаю,зачем я 5,5 лет в университете учился.....

[@user-so8pk2vl9l]

умнее не стал?

[@monyetmonyet189]

Tambah bodo

[@TheMarkAvreliy]

@@user-so8pk2vl9l бОльшая часть - бесполезная параша. Выпускают нулевых спецов, в техникуме иной раз лучше готовят, т.к. там меньше гуманитарки нагружают.

[@user-rp3us3cu2w]

Для того и учился, что бы вот так на коленках гайки не крутить.

[@user-rk4bl7ek6q]

​@@user-rp3us3cu2wкто крутит тот имеет.

[@swjang3584]

All done by their muscle memories, amazing skills and perfect collaborations.

[@ichoozjc]

Memory of what? The last incorrectly torqued bolt? Lol

[@Hardy_H_H]

that's not muscle memory, you should look up the definition of muscle memory.

[@user-arshad.]

Mechanics like these guys are the reason i am driving my 1976 Toyota Corolla ke 30,

[@xBlackThoughts]

I would have loved to see when the car was started again for the first time after the engine had been installed.

[@PrimeraRSTKD]

started knocking instantly

[@haydonditchburn2194]

@@PrimeraRSTKD and all those iron filings circulating through all the galleries...

[@amantek3545]

@@PrimeraRSTKD why do you say that 🤔

[@kapilappi]

​@@PrimeraRSTKDiir hu.

[@bikeman1969]

It's amazing how there's 5 or 6 guys tearing the engine apart like there's no tomorrow. That's efficiency.

[@user-kl8sk3zb7z]

Он бы еще ремень ГРМ смазал))))Обожаю этих пакистанских парней))) как сказал один мудрец Труд сам по себе есть наслаждение))

[@Yaroslav_Moshkovich]

Много масла не бывает :))

[@Nikhil_ktpr]

Torque Wrench Left the chat

[@mitinobokanasiro7208]

Nn

[@mcorchannel8444]

They have advanve tools. Estimater

[@ilyaskhan4082]

My channel #mechanical market

[@ilyaskhan4082]

Please support

[@balazsszabo9137]

💪💪💪💪 this is the torque 😂

[@user-hl6wy1bj7n]

Жесть, толпой раскидать мотор, вручную шлифануть, на глаз расточить. Я вообще удивился что у них микрометр есть, думал замеры цилиндров рулеткой сделают🤣 Когда он колено бросил на землю у меня аш сжалось все.

[@user-mi8bx2zl1f]

прасти, нащяльника!!!! Все пизнессс 🤣🤣🤣

[@araxisvvv802]

Он сделал его прекраснее...

[@user-te6jw4ob7d]

Это такая проверка коленвала

[@user-ez6hq2cz7m]

Челны нервно курят в сторонке 😅

[@user-we5er6gh5v]

Надо челнам показать как правильно колено на бетон кидать может и масложор пропадёт.🤣

[@DmitryIvanov27]

@@user-we5er6gh5v короверы вообще не шарят в технологиях, вот где будущее

[@Bayuhutamamotor]

penjelasan yang sangat jelas boskuh,mantab ilmunya boskuh

[@user-wh2tx2bd2z]

Папа,а мы всё правильно делаем ?Да,сынку,Вашпет знает технологии,учись у него!🤣

[@themanwithnoname2867]

💀💀💀💀

[@ShoruxKholov]

Hahaha smeshno ochen pizdets smeytes vse

[@user-hc4jd5eq1z]

寄ってたかって分解、ボーリング、ホーニング、そして洗浄ですね。組み立てには、親方が中心となり兄弟子・弟弟子などがサポートし「トルクレンチ」など使わず「職人の感覚」で締め付ける「テルクレンチ」素晴らしいです。日本では「整備士」と名称が変わりましたが、古き良き日本の「修理工」と言う誉め言葉がピッタリの修理工場です。

[@HIJYOSHOKU]

うんうん、ギュッと締めとけばおけおけ

[@user-ib1tg3ge5x]

Прекрасное сообщество, где каждый старается принести пользу)

[@muzakarim3848]

Последовательность затяжки болтов не соблюдена, про силу затяжки нет речи

[@Sergeimdg]

А на хера? 😂 и так сойдёт!)

[@veram.2460]

Они даже не заморачиваются вычищать абразив из масляных каналов. И так норм.

[@user-ec7qp5lh6l]

Они не замарачивались и уронили колено)) о чем тут речь))))

[@htc-tm6bj]

А зачем тогда фильтр стоит?)

[@veram.2460]

@@htc-tm6bj Масляные каналы после фильтра - абразив выйдет только вместе со вкладышами

[@AndresPrado95VL]

​@@veram.2460 Да вкладыши и так выйдут после такой шлифовки колена🤣👍

[@user-lz2vh6ex3k]

После расточки блок мылся если что. Во время расточки был вес в гуталине, перед сборкой блестел как у кота.

[@gerardolopez9836]

Excelente trabajo, felicitaciones a los mecánicos y al que subió el video. Desde Montevideo mucha salud para todos.

[@jpcheco]

El trabajo no es excelente, por la falta de precisión y quizá de limpieza, rápido quizá.

[@gerardolopez9836]

@@jpcheco y si José para tecnología rudimentaria que utilizan es bastante aceptable, ni si quiera trabajan en un banco , todo en el suelo .👍

[@jpcheco]

Tienen más equipos que muchīsimos talleres (fresadoras, tornos, gatos, grúas) y herramientas, pero en apariencia les falta el deseo de superación… sencillamente les da lo mismo. Uno no se imagina a un grupo de japoneses trabajando en chancletas y en el suelo (quizá suena racista la expresión, pero mucho tiene que ver con el medio ambiente, el entorno … jeje)

[@xinnomaka4726]

@@jpcheco Así es la cultura, no es porque sean sucios o sin ganas de superarse

[@williegillie5712]

Kind of reminds me of the guys that used to come over and help me pull an engine or transmission. Fun stuff to do on your time off. These guys look like a well oiled engine 👍

[@Evkaz100]

Хозяин всего лишь хотел чтобы ему поменяли свечи накала и заменили антифриз. 🤦

[@madzhitoff]

ты хозяина знаешь, умник?

[@Evkaz100]

@@madzhitoff А ты его секретарь?

[@altair1nur107]

Хозяин просто хотел воду заменить в картере

[@antey1956]

@@altair1nur107 вот я тоже охренел.

[@voltaire372]

I like seeing everyone working together!

[@user-ul2ue9eh2f]

Как все просто, а унас сверх точные станки, вагон времени и непомерные цены. Молодцы ребята.

[@themanwithnoname2867]

💀💀💀💀💀

[@yotub_A_Vorobiov]

Почитайте комменты ниже, потом хвалите. Я вот не видел раньше чтоб масло на прокладку наносили, зато видел как люди бензином перед сборкой эти поверхности очищали...

[@user-sz1yx4yj3z]

А коленвал кинуть с высоты собственного роста о бетон, это вообще шедевр. Гнутое колено, не не слышали... Дальше можно не смотреть. 8 минут 50 секунд

[@user-wz3zj1ft4g]

Средства измерения мне у них нравятся.

[@user-wz3zj1ft4g]

А не, оказывается появились попозже, я уже подумал что на полу расточат и поставят)

[@vladimiralexandrovich7285]

Учитесь мотористы, мы обезжириваем место под прокладку головки блока, а они маслом смазывают. Отличная работа! Кооператив умелые руки!👍

[@user-mi9tk6hr4w]

Я знаю этих парней, из нашего гаража

[@alexeydybov875]

@@user-mi9tk6hr4w Шутники 😂

[@user-wz3zj1ft4g]

Да нифига с этой прокладкой не станет.

[@AlEl25]

Зачем вы обезжириваете место под прокладку?)

[@antey1956]

Мне больше понравилась притирка поверхности блока. Какая сотка, там тысячка !

[@07allis]

Brilliantly done and without all the fancy tools that the Western world has. Well done guys

[@haydonditchburn2194]

Rubbish. From someone qualified to know the difference..

[@user-xg1jg5zu6q]

Вот так остановишься на 5 мин. у супермастерской, сходить в магаз за хлебом, придёшь, а у тебя уже мотор убили.

[@evandrosabino8196]

Parabéns a vcs , excelente trabalho 👋👋👋

[@aiasdambyy3204]

Какой ролик не посмотришь, любят они всё на корточках делать. И двигателя ремонтировать, тапки шить, металл лить. Ну просто всё на корточках.

[@fishinghamster1309]

эти хорошо еще не прям на земле собирают😅

[@5043301]

еще не дошли до стульев

[@AndresPrado95VL]

​@@5043301 там стул только у бати, остальные ещё не заработали🤣

[@user-tl1jv4wk7z]

Интересно, что сказали бы братья Богдановы, если бы увидели, что на хон-головку одевают наждачную бумагу?

[@antey1956]

Многие так делают, просто не показывают.

[@user-zi7hz3sy6j]

Как они интересно собирать его будут, тоже толпой 😊

[@USAcherti]

Смотрю в начале и думаю, ну всё двигатель разбирается 8ю людми безвозвратно, но нееет)))

[@williamvaldes9924]

Mis respetos. A pesar de no tener tanta tecnología muy buenos mecánicos y buen trabajo de torneria mis saludos bendiciones

[@gabrielfraser6824]

Amazing job! I'd love to see it running.

[@morosso1968]

i've just finished watching a porsche factory in germany building the 911s. it mesmerized me how modern the technology there was to build those magnificent cars. and then this came as a suggestion to watch. i'm not a mechanic but i do understand just a few, it couldn't be precise and perfect but these guys simply knows their business. their skills are impressive, everybody seems have their own share of work to finish the job which i found that good. hats off to these hard working people.

[@user-ux1sr8jz4p]

Ни дай бог скатиться до такого уровня, чтобы обратиться к таким «умельцам»!!!

[@DmitryIvanov27]

думаю скоро придется

[@user-mn9tu2dq3p]

Прежде чем такое писать, посмотри на себя в зеркале что ты в жизни полезное сделал. лол

[@ShoruxKholov]

Pizdets ti takoy umeliy smotryu😂

[@eddie3314]

These guys work very well as a team. This work looks so natural. Lots if experience to have things go so smoothly

[@themanwithnoname2867]

💀💀💀💀💀

[@wwtpexec]

1 unit engine dismantling work used more than 5 man! you must be joking!

[@themanwithnoname2867]

@@wwtpexec 💀💀💀💀

[@smilingcopycat]

Yeah, that piston head insert went smooth....lol They don't even know cross pattern bolts......that is rule numero uno....

[@opelopel4874]

При вывинчивании пробки слива масла двигателя, сначала потекла вода а потом только масло! Заметили, в 2:04

[@narydnu]

Видать эта разборка после гидпоудара

[@whykenneth]

I guess this is the best they can come out with in this environment. No one would expect the rebuild will last the vehicle life time but still they did what is best for customers with skill. Very well done! Kudos!!

[@nanerpussz]

Wont last the life of the vehicle? Yeah because that engine will outlive the vehicle. Bored, honed, new bearings and polished crank etc etc. What crack are u smoking mate, still toyota engineering as well, youre a bot.

[@TN_HondaDad]

Agree, is it high end Toyota dealer in the US with state of the art equipment, tools and machines. No and it will never be however, I have to give them credit for a pretty darn good job working with light tools, a greasy floor, bricks to lay the engine on and flip flops!

[@bakoena82]

This rebuild will last a long long time,i have faith in these guys.Simple but perfect.

[@paulsavenue12]

To import the solution is most likely prohibitive (parts and specialized tools) so they use what they have- 3rd world reality

[@user-vs3wt7ip3q]

Мастерам респект!!!!!!

[@louisrangel4876]

Bien hecho el trabajo felicidades les doy un 10 saludos desde Chico ca USA

[@morphinechild251]

Оставшиеся после ремонта болты никогда не подходят к гайкам, оставшимся после этого же ремонта.

[@user-jw4be8hw4v]

Молодцы ребята.Братья мои.

[@user-vh6ox8sc9r]

Где они находятся? Я им вышлю динамометрический ключ😂

[@thosuaxemo]

Quá ok tôi cũng là người thợ như mấy bạn,tôi ở Việt nam phụ tùng cũng hạn chế như nước bạn ,sửa chửa gia công lại có khi chế lại một số đồ chúc vui vẻ

[@paulwitulski1905]

Wow...I guess if you do you long enough you remember where every bolt goes. The only thing I would suggest is them to use a torque wrench for any critical areas. Other than that nice job.

[@UralskiyPelmen976]

Как то так я себе и представлял стандартный ремонт тойоты

[@user-kd8be1fe4b]

Біль.... це під час перегляду відчуває кожна людина , яка хоч якоюсь мірою має відносини до СТО.

[@user-vo7nj4yw3z]

تسلم الأيادي يا مبدعين أللهم زدهم علما وجازهم خير الجزاء وبارك لهم في رزقهم يا رب العرش العظيم الشيخلي يفتخر بكم ساشترك بقناتكم

[@elministro7]

EXELENTE TRABAJO, MUY LIMPIO EL TECNICO

[@charlesoparah3178]

Amazing. This is never done by a mechanic in The US within this short time span. Kudos

[@shangman4240]

because the engine going to fail within 2 months with blown head gasket as it did the first time, (all water coming out of the oil pan) there no man to block sand a block deck like that.

[@bennybouken]

@@shangman4240 and people with proper tools still end up making the same mistake more than these guys Lol cope hard

[@danw3735]

Without the U.S you would still be using a horse and cart.

[@arttellama2408]

Done in short time span, fail in short time span. They missed important things: proper bolt torgues and clearance measurements.

[@jaydawg3031]

​@@bennyboukenlet me guess, your just a random stranger who knows nothing about car parts or engines but just like to make comments? There's many things wrong about the way they fixed this engine, there's a reason why Western mechanics would take much longer because of insurance and warranties that can get a mechanic sued or go to prison if something really bad happens to the car and injures or kills the driver.

[@michaels.1601]

Tolle Menschen...Die alles können 👍👍👍👍👍👍👍👍Grüsse aus Österreich (Austria)💙💙💙💙💙

[@jasoncummings7052]

Absolutely impressive. Europe and America would like to tell the world that they alone have all the talent. Talent is everywhere so wherever you are keep showcasing them. We appreciate them.

[@2nickles647]

Takes no talent to remove or tear and engine Apart. No skill needed. 😄

[@mthobisisikhakhane5305]

Americans don't rebuild,,but they replace with an aftermarket parts🤣🤣

[@gordonwelcher9598]

They didn't put enough camel grease on the main bearings.

[@jeanpierreaguer2118]

Vous êtes des artistes Messieurs, pas un seul mécanicien Français ne vous arrive a la hauteur de l'ongle d'un doigts de pieds !!!!!!!

[@silverfox8915]

these guys can fix or make anything, well done

[@Zeph_]

Their country looks broken

[@kennash5719]

@@Zeph_ So does England

[@betosilvaIGU]

Six guys working together, incredible and at the same time interesting how the work is transformed into a classroom for the youngest. About how they work without protective equipment. It is still part of the local culture. Admire the ability to adapt.

[@antoniocarlosnajar8626]

PARABÉNS PELO VÍDEO, EXCELENTE!!!

[@sauljob2396]

Damn, like an engine party going on, everyone taking a piece of that engine.

[@anangsuharso8375]

I do it alone. Take time about a month. Wish i find this kind of engine workshop in my hometown.

[@singaporeseaslugs1393]

Its like an engine gangbang

[@sauljob2396]

@@singaporeseaslugs1393 lol I know right

[@reinhardtrippmacher8776]

As more people work on it as easier it is to say later "it was the new apprentice kid who screwed up but he works now in another garage...so we don't know!"....😅

[@sauljob2396]

@@reinhardtrippmacher8776 They did have the main boss mechanic as you can see in the video, I believe he did pay attention to everything before they assemble everything back up, but I do agree with scenario you picturing.

[@user-uv3uo5pk8p]

Здесь не важно как разобрали и собрали, это контент зарабатывают на просмотрах видео, мы смеёмся над ними, а они над нами.

[@sergeyrachek7974]

Через 20 тысяч или раньше приедет опять на ремонт машина, парни без работы не останутся)).

[@ShoruxKholov]

Umnik kakoy u nas zdes divanniy ekspert😂

[@user-lo5fj3cb9s]

Идеально 2 и 3 а там как пойдет)))

[@5043301]

хорошие ребята знают свое дело пожалуй им отправлю свой 2.0 tfsi на переборку

[@CTPEJ10K]

На переработку 🤣

[@porhporhev493]

На переплавку😂

[@_MAXYM_]

По сцепе они его капиталят раз месяц

[@amysabri6730]

Assalamualaikum.... good job brothers,alhamdulillah..

[@leoramirez6158]

Admire everyone puts hands on the engine also worries me lol great team work regardless.

[@rodrigodesouzafernandes4592]

São como nós Brasileiros, tudo se dá um jeito...

[@ezequielsilva2709]

Ótimo trabalho 👏👏

[@josemiguelfleitasmedina2914]

Si... optimísimo!! Y el torque que, a pecho ?? Jajajaja

[@robertoudokrapf453]

OLÁ. E´ muita coragem querer ensinar sem ter aprendido. ABRAÇOS

[@fayazahmed3442]

good job bro.pakistan mai buht talent ha bs enko support krna ke zarort ha govt level par.👍👍👍👍

[@alceuamaral9894]

eu tenho noçao de mecanica sou sodador industerial bastante esperiencia por isso gosto tambem de mecanica

[@edneicabofrio]

Parece um motor 1KZTE que equipa as SW4 1998 a 2022 que foram fabricadas aqui no Brasil. O mesmo motor também equipa as Land Cruiser Prado..

[@celsogomes9299]

Que inteligência tem o brasileiro..para falar isso..

[@edneicabofrio]

@@celsogomes9299 Vc é especialista no assunto? Porque esse tom irônico? Por acaso tenho uma SW4 2001. Vc discorda do que eu disse?

[@user-fd2oc4kf3w]

Похож на 5L

[@herminiamartineztorres8503]

Ormiguitas...de Ds.. muy hermoso...Su sistema...La sabiduría... De Ds... esta con Ustedes...Que lindo ...es su familia de restauradores...

[@UndertheHoodUSA-2024]

These guys did a pretty damn impressive job on the rebuild, although I'd love to see them add a torque wrench to their collection

[@asdgft4572]

Ходос и кwpower вышли из чата🤣

[@MrVovanli]

надо им это видео скинуть, пусть учатся у специалистов

[@Baebon6259]

I trust these guys to rebuild my engine than them dealerships nowadays.

[@LitoCano]

Los tornillos nuevos y dinamometricas es lo que más me ha gustado, ah! y el orden de apriete.

[@claudiogildo]

me gusta ver este video mecanica automotriz , y me encantaria aprender sobre mecanica, saludos desde argentina...

[@FotoSport043]

The torque valeu is professionally achieved after two grunts and a fart 😂

[@caddyrack]

I totally concur with you, did you notice tongue sticking out on one side of the mouth for extra calibration?

[@MrVovanli]

Интересно, после такой разборки двигателя толпой, его соберут обратно? Какой болт от куда и что куда думаю мало кого там интересует, про коленвал вообще молчу, я так понимаю блок камнем торцевали ну поверхность и наждачной бумагой 2000й так сказать зеркало набивали

[@fabrika6092]

потом контрактный движок поставят...

[@Stefoshark]

Hi from Canada, love those video nice work friends, but the main L tools always amaze me it do many thing, ratchet tool, pry bar, punch, ect..., i see it in every videos

[@Stefoshark]

p.s. sorry for my writing im french

[@booncheongwee3025]

Great team efforts, fast turn around time...

[@muammeryuce7706]

Bütün gücünü kullanarak vidaları sıkmak korkunç😔

[@user-ie8lz5mx2n]

Глубоко сочувствую хозяину авто !

[@CoberRuger]

он будет ездить и радоваться

[@themanwithnoname2867]

💀💀💀💀

[@user-sq2hg7nh9u]

@@CoberRuger да тысяч 5

[@mario17-t34]

А какие есть замечания, по чистоте или что-то конкретное, я не спец, хотелось бы узнать детали. Что все затягивают на глаз ,без динамометра ? Или еще что-то. Заметил что поршень заколачивают металом, обычно все деревяшкой. То что все без носков ето херня. Спасибо

[@dmitriykrylov6197]

Ни одного промера)

[@on-site4094]

car will be ready by end of day great team work

[@San.55]

Respekt from Germany 🇩🇪 to Pakistan 🇵🇰 nice Job Guys 👍

[@shangman4240]

good effort, but I see why it blew a headgasket previously. No way you can block sand a deck like that... that need to be machine properly especially with a turbo setup.

[@gordonwelcher9598]

They will seal the head gasket with standard camel mucus. It is scraped off the various orifices of the beast while it is sleeping.

[@user-qw8tr6ck9z]

Странно что у них гусь не самодельный, хотя...

[@laexcelenciasonidera9135]

saludo desde Mexico es sorprendente como trabajan de cinco a ceis personas en un motor todos vien hordenados y sin que lesfalte niuna piesa de colocar.