Ugears Robot Factory Model

[@paktoysreview8377]

OMG you guys have really outdone yourselves

[@andhemills]

Dang. This takes a robotic reproduction concept I have to a whole new level, because I've wondered what some material requirements were and this shows how effective wood (and rubber) can be in robotic (re)production...

[@Jonahlight]

This is gonna be the next Lego!

[@ugearsmodelsua]

Yes, for grown-ups and then for childred

[@MysteryScienceGaming]

2:14 "We work hard, we play hard"

[@SteveFrenchWoodNStuff]

I was smiling through the entire video and still am! That is incredibly cool!

[@carmenvittoni5580]

I wish there was a build video

[@iantaggart3064]

It's more than a model if it actually builds the robot.

[@ugearsmodelsua]

Hi Ian, it does make a semi knock-down automatic assembly of the robots

[@sitiaminah6499]

What kinda types of machines can exaggerated these very genius, extraordinary machinery/Artificial Dominos whatever?

[@JohnSmith-un9fy]

That is ridiculous. And it is mine.

[@overlyobsolete2797]

Me building the ugears safe: Oh, I bet this won't be too hard. Five hours later-"cries in confusion" me building this: "swings from the noose"

[@v.v.m9157]

To be honest, I had the same experience.

[@whatthewhatthe9117]

It doesn’t matter how old you are, nobody has enough grip strength on their thumb pad to survive assembly in one sitting

[@viswanathangowrishankar3187]

Do you build custom models?

[@hazelnutsheep7863]

3/5 I got one for Christmas, amazing kit but has some flaws. 1. The toothpicks are to big for the 2mm holes, I had to get a knife and make them smaller in diameter manually. 2. You didn't include enough elastic bands. Had to go buy some more. 3. The bands that you have included were to stretched out and didn't do their job. I have finished it, but it still doesn't work. This could be my fault however. I'm gonna sit down once in a while and find what's wrong. Maybe swap out all of the bands, or put some more candle wax on the gears. If I do make it work I'm gonna come back and edit this comment. If it's not edited; it still doesn't work.

[@b00fh]

I agree that the toothpicks were a pain, could not be inserted by hand, but with some small pliers to help, it works fine. I'm not done building mine yet, but I think I will have enough elastic bands: I just had to cut them to the right size and tie some knots. For instance, when building the robot legs, I could build three legs with a single band cut in three. Of the parts that i've completed so far, the double piston with the big cog was the most finnicky, i had to really cut the toothpick leftovers clean or they would block the cog. The rail-mounted elevator works perfectly smoothly.

[@Serhiy34]

Ugears ended. Ideological inspirers who founded the company left. That's what makes ugears now devoid of mechanical charm and quality of past works. Maybe that they will do something interesting and beautiful in the future. But honestly, I doubt it. The investors with blindly thirst for money will destroy this company.

[@terrythayer2159]

If you wax the toothpicks they slide fine - it makes for a nice tight fit as well. My completed build also doesn't work - the gears are locked tight and the button you are supposed to push to release the power doesn't do squat. I've been in touch with uGears support, and even got info from their engineers - due to the maddening number of instructions that go with the build. According to uGears engineers - use the PDF version that is available on the website NOT the instruction booklet and inserts that came with the kit. It seems I'm not the only one to reach this spot - It would be nice if uGears supplied some sort of troubleshooting guide for these things but when communicating with them I very much got the impression it is a company in flux. Best of luck builders!

[@hazelnutsheep7863]

terry thayer thank you so much! I guess I'm gonna have to disassemble and start all over again, oh well more fun! I hope it will work this time!

[@Bonecrusher27WTF]

OMG you guys have really outdone yourselves! :)

[@ugearsmodelsua]

thanks:)

[@trainfan-ks5hk]

I wish you had more track for the steam locomotive

[@kevuk3]

when is this available

[@FullFledged2010]

Laser cutter ftw!

[@Wolchanskiy]

Я не могу найти этот набор в магазине Ugears. С чем это связано? Этот набор убрали или что?

[@SvetlinTotev]

I love those joints.

[@sh1-rkdefriscofrizzy183]

I hope that I can afford one since the price in my country is expensive.

[@kyled6168]

I want it

[@finncassidy4336]

Have you made a wind up v8 engine yet? If not, it would be very cool.

[@ugearsmodelsua]

Hi Jawsome, we use a working V8 engine in U-9 Grand Prix car and in the Roadster VM-01 models

[@alfoulymohammed81]

why dont you put electrical motors

[@alfasyalovagghie518]

Is it made out of wood ?

[@ugearsmodelsua]

yes, the Robot Factory model is made out of wood

[@mrj.o4556]

They look like jadoon from doctor who but why can’t I buy this product

[@mrj.o4556]

You can’t buy in uk

[@tarik4685]

а мені найбільше сподобались ці роботи)

[@toyslover2396]

could anyone tell me if there any online courses that teach automata and mechanical toys

[@toyslover2396]

Thanks

[@finncassidy4336]

Yeah there is

[@kratz240]

Aaahhrrrrrgggghhhhhh?!!!!!!!! MY BRAINS!!!!!

[@MisterFonkey]

I swear this is how Skynet begins... o.o

[@Eric-zi1oz]

Amazing

[@patricedorotte4525]

pouvez vous me faire parvenir une documentation complète sur les véhicules ( camions voitures) livraisons , payements qui contacter merci

[@AlexNukem]

Если честно, не очень. Хочется иметь нечто компактное, но функциональное, вроде поезда или машинки. Я ваши поделки почти все скупил: места совсем нету, негде складывать. А это, по всей видимости, занимает очень много места.

[@ugearsmodelsua]

Добрый день, в собранном виде это модель компактная (40х40см приблизительно). Мы ее специально в таком масштабе делали, чтобы найти дома место

[@ОлександрМіхневський]

купите отдельную квартиру для них.Ведь они того стоят:не зря же вы все скупили!)

[@klauskampmann2039]

ugears models u

[@mikedelam]

very awesome

[@藤堂迅]

かっこよすぎるwww

[@estantaya]

this video whit soviet music pls

[@bananakickers2947]

우리나라 한국에선 이걸 "이쁜쓰레기" 라고 부른다 왜냐면 뛰어나게 아름답지만 실생활에선 크게 쓸모가 없기 때문이다

[@masbud11]

Mantap 👍🏻👍🏻👍🏻

[@olegfootball731]

👏👏👏👏👏👏

[@nastyamolokanova2647]

Сижу сейчас србираю)

[@kisilok432]

у мене день народження 21 жовтня це моя нова мрія

[@prashantjana2612]

You are extra orangery guys

[@sebastiaanwezenberg9919]

Holy shit take My money giffed to me

[@НиколайСилич-ы3ц]

😀

[@germanrojas2001]

😱😢

[@eknathpradhan8250]

In

[@eknathpradhan8250]

India

[@TanHiepHo]

Lol

[@GSParchitecture]

ya no saben ni que inventar

[@vladimir-a8388]

слишком дорого

[@Zemcheg]

А что вы ожидали?