Ulticlip XL - In-depth Overview

[@jobyEN]

You got a winner there, sir! Love my Ulticlips!

[@irishsavage8715]

I've drilled a secondary hole in your first clip, before the other two were available and it took almost 5 minutes on a drill press with a tungsten carbide dill bit. It dulled the bit... I'm very impressed with the Steel you guys make these out of.

[@TonyWhiteHat]

Well done sir! Very cool innovation! We will see you at USCCA expo!

[@j0shll0yd]

Genius! I’ve been using Ulticlip for a couple years on my holster, I love it. Looking into getting an appendix carry and considering the XL. Seems like the way to go! And the multi-tool idea- 👌🏿 genius. Cuz why not?!

[@GracefulCalvinist]

Ok... I love the Ulticlip design... The only reason I don't have one is because I like my clips supported by my belt... Well now you've gone the extra mile with the multi-tool... I'm impressed. God bless.

[@ULTICLIP]

Thank you!

[@acem556]

I've used the Ulticlip for 5+ years on my every day carry, never had any issues till I change my pants brand name. The new pants don't have much of a lip for the clips to hold on to. The old clips are still great shape and I just ordered 3 Ulticlip XL before seeing this overview. Thanks Guys and God Bless you.

[@KimTownsel]

Thanks for the great demos! I was the lucky winner of the Shoot 4 100 for May 2017. I already have an UltiClip but I haven't used yet because I bought the #Ulticlip before I bought the pistol that I'm going to use it with. I look forward to spending my winnings from UltiClip! I likely will buy an ulticlip for one of the pistols I already own.

[@danw7156]

Started using them on the holsters I make...damn good clip.

[@warrenbfeagins]

Bought the XLs for my N82 tandem holster. They are simply a must have. They give you a more stable and durable set up.

[@jonwilliams5163]

I am going to order a Cook’s holster for my S&W SD9 with the Ulticlip XL because I intend to use it with a belt. Very innovative and I can’t wait to try it out.

[@ULTICLIP]

We appreciate it! And Cook’s makes a great holster.

[@Napoleon-Smoot]

Ulticlip XL is the only Tier 1 AIWB holster clip I use. I retrofit all my Tier 1 holsters with this clip. You can also run this clip directly on pants fabric, which acts like a reverse holster wedge.

[@marcosfernandes1137]

Love this design. About to order.

[@debbiearmioiathomas5107]

You guys should think about looking into photography carrying market. For reference I would refer you to the Peak design capture. I believe that you guys could break into photography market. I am an amature when it comes to photography. But I love it.

[@franklinfocus]

6:45 the exact reason why I’m going to order one. Every time I grab for my gun the entire holster comes out with it. 🤦‍♂️ I can’t wait to get it, I’m ordering from hawg holsters 🙏🔥

[@garymackowiak1657]

Have you had people complaining about the extreme retention on the clamping down in so much it's hard to open. I have three and they're all the same and hard to open. I have tried to grind one down with a Dremel and still to to hard to open. Thanks, Gary

[@mattysee24]

Just got my ulticlip xl, but damn it's SO tight I haven't been wearing my gun cuz this ulticlip can only be pryec open like 3mm.

[@omnivector45]

Im having the same issue. There is no reason to have even half the tension that they have on the clip. It make the holster unusable. I contacted the company ad they seem to be unfazed by my problems with their product. Not good.

[@claytonmansfield7704]

I'm sold....swapping out all my holster clips to these

[@GlC_Cigars]

Need this for a 2 inch belt

[@SpareMag]

I’m sold. I have the regular Lito lip but need a couple that fit a hard belt

[@sharper9009]

This clip would seem to keep the holster from sliding around on the belt too I think. I wear a hybrid stealthgear holster and I start it out at 4:00 but after a little bit of wear it slides to 5:00. If I'm correct on that I'm gonna have to give the XL's a try

[@ULTICLIP]

The XL locks down so that the clip can not come off your belt without rotating the flap to unlock it. The XL can help keep your holster from sliding around but it would depend on the thickness of your belt. If your belt is thin, then there is still the potential for it to slide. If you are looking for a clip that will not slide then check out the Ulticlip3. Ulticlip3 is designed to be clamped directly to your pants behind your belt. It will not slide around when once you clamp it to you pants.

[@Singleshotmafia]

How do I mount one to my Concealment Express like he has in the video. He shows the concealment express (CE) holster but then shows another holster with the Ulticlip XL on it. Reason I’m asking is that the CE holster has the screws horizontally but the Ulticlip is designed for vertical arraignment.

[@ULTICLIP]

Kenyon York The Concealment Express holsters can be ordered in either configuration. If yours is set up with horizontal holes it won’t work with our XL.

[@KosukiFire]

I love these things. Can you make your next one for Molle attachment system as well. Be able to attsch mollr pouches and carriers directly to the ulticlip

[@theoneeyedwoodsman4726]

That's not a bad idea at all. I'm currently searching for a clip-on folding dump pouch to clip onto a pants pocket or belt and to use in applications like fishing, DIY, bushcraft and foraging, and i can't find shit. I hope Ulticlip releases its own folding dump pouch, and i think it would gain instant popularity by sending the pouches out to youtubers in the bushcraft community primarily.

[@roylxix]

Does it loosen up? Right now I have to use a flat head screwdriver to open it up. It is secure but not usable now. Nothing like the ease shown on the video.

[@americanmambi]

great product, bought it after watching The Warrior Poet demo on their holster.

[@billiefry4703]

We can't wait!

[@sunnymirza6221]

Would I need two clips if I have a traditional clip with two screws like the one used for demonstration without the ulticlip

[@ULTICLIP]

That type of holster is not compatible with our current clips. We’ll be releasing a new clip in a few months that is designed around that hole pattern.

[@sanderscb21]

Any chances of a 1.75 clip in the future?

[@AG4KN]

Holy Ulticlip XL Batman!

[@whatfreedom7]

So do these work well on a 1 1/2” 1/4” thick nylon like kore or leather belts?

[@darthnatas953]

Look good! Need to make one for 1.75" belt.

[@ULTICLIP]

Darth nataS Thanks! The XL will accommodate thinner 1.75” belts.

[@darthnatas953]

@@ULTICLIP Have Wilderness instructor 1.75" CSM belt on the way.

[@harvestblades]

@@ULTICLIP Any plans on the XXL for the 1.75 as I love my SOE that comes in just under 1.75", & wasn't a cheap belt. However I love Ulticlip, & want to support the work the company does. Was really wanting this to work on the Green Force Tactical Berkut 2.1. Just leary of a single camming clip on fabric. God bless.

[@ULTICLIP]

@@harvestblades No plans at the moment to make a larger version. If your SOE belt isn’t super rigid it may fit through our current XL clip.

[@Sneakshot88]

Can the ulticlip3 be used on things like thick sweatpants waistbands?

[@ULTICLIP]

Armed American Yes, we just recommend that you don’t switch back and forth between thick and think materials.

[@martingarza3383]

Just ordered 2 from Amazon.

[@sirwhitecrayon2499]

This belt does not work with the The Wilderness "5 stich" reinforced belt, which is a bummer because any belt worth carrying a firearm with has have this type rigidity. I really hope to see a 1.75" and 2"+ versions in the future.

[@deepb249]

Hey guy I am reading this is a metal clip with sharp edges and chews up the belt and it also leaves a residue on pants And so one has to put oil or other lubricant on the clip too? To prevent it from rusting? So the clip will rust and can leave rust marks in pants or jeans and on belts too?

[@ULTICLIP]

Our clips are made from heat treated spring steel. The edges are rounded and contoured where they can be and each of the parts get tumbled to smooth the edges. As for residue, that would depend on the oil/lubricant that you may/may not use on the clip.

[@deepb249]

@@ULTICLIPso no direct answer whether it chews up the pants and scratches the belts? reviewers are saying residue is coming from brand new clip on which they have rubbed no oil. So one has to put oil or lubricant on clip too? So it does not rust? If it rusts then rust can leave marks on pants and belts And to prevent rust one has to use oil and lubricant on clip and then it can leak from clip and leave residue on pants and belt?

[@ULTICLIP]

@@deepb249 Our clips don't typically chew up the pants. Because they clamp to the fabric, there isn't friction or metal dragging against the pants. When used with a belt, they will of course make contact with the back side of the belt. Will they scratch the belt? They could but it's not a common complaint that we hear. Oil- our clips get a light coat of oil after receiving a black oxide finish. Excess oil can be wiped off before use if that's a concern.

[@stephenmartini5890]

Does the Ulti clip come wider, like one and a half inches wide with the standard mount? No biggy, the Ulti clip is an awesome mount. American ingenuity. You're going to find people using those clips for all kinds of ideas, like back packs, fishing gear, hunting, camping, or just everyday activities needing an awesome clip, taking the world by storm!

[@ULTICLIP]

Thank you for your interest in Ulticlip. We do not currently make a 1.5" wide clip. We continue to develop and release new products so be sure to subscribe to our channel or sign up for our newsletter on our website. www.ulticlip.com

[@elbowtko]

Hi, Can you tell me any kydex holster makers that are currently shipping kydex ulticlip XL holsters that already have holes for aiwb carry and OWB? Looks very nice!

[@douglasdavis1715]

FlyingSquirrel just ordered one from pyntek.

[@nickf8524]

Hawg Holsters

[@Ohio19919]

Does the XL have more retention without a belt or is it about the same as the 3?

[@ULTICLIP]

Chris- they both use the same patented design although the XL is really designed for belt carry while the 3+ can be used without a belt or concealed by a belt when attached to the waistband.

[@Ohio19919]

@@ULTICLIP thank you were looking now for a good holster company that has options for ulticlip 3 for my wife's glock 42

[@ULTICLIP]

Chris Alexander Take a look at our directory of authorized dealers. Most should offer an option for that gun. www.ulticlip.com/shop/authorized-dealers/

[@YouLookinAtMe-Bro]

So I can use the original screws on my Crossbreed freedom Carry? Or would I need to get different hardware?

[@ULTICLIP]

TaterScott Your existing hardware should work.

[@YouLookinAtMe-Bro]

@@ULTICLIP Thank you very much! Anxiously waiting for the XL like a little kid waiting for Santa!😂 Thanks for your time.

[@ULTICLIP]

TaterScott Great! Let us know if you have other questions.

[@pinkeye00]

Honest man gut. I'll be buying one.

[@jgross1991]

Anyone try this on a 1.75 belt??

[@ULTICLIP]

Mike- if the belt isn't terribly thick and has a bit of flex you should be able to use it with the XL clip. Let us know if you have other questions.

[@debbiearmioiathomas5107]

I have a concern. My husband makes his own belts . He uses a green military tow strap to make the belts ?'Large ladder lock buckles" . And the dilemma is while the belt only measures in at 1.75 inch. It is double layered on the area that he clips it at, the 420 or so area. This is when a 2 inch total belt space is needed. If this ulti can handle the thickness of the doubled tow strap is my only concern . I guess the only way to know is to buy it and see . However I would also like to know if one can use the ulti with KYDEX Holsters? As these aren't 2 dollar clips. The chaep clips that came with our holsters could be like unto the use of a child's clip. And they are useless They call these fold over plastic clips

[@ULTICLIP]

The XL is designed to to clamp around a belt that is up to 3/8" thick and 1.5" wide. The FAQs page on our website has information to help you better understand our product. We also have mounting templates on our FAQs page that you can download to check for proper hole alignment and size.

[@lowkeylowkey1000]

All I wanna do is hold my pants up with a clip instead of suspenders while attaching my edc crap to a belt. These look like they will perform this task. I must ask, are they made of stainless steel to be close to skin?

[@ULTICLIP]

Our clips are made of heat treated spring steel.

[@lowkeylowkey1000]

@@ULTICLIP Thanks for the reply. I asked before I got to that part in the video xD I was mainly concerned with is it going to rust? Do you plan on making a titanium variant? The steel looks like $18. I would need 4. If they were titanium, I would have no problem paying $30-45 each. If it helps. VSMPO titanium seems to be a major player in the titanium world market. Plus I have a folding shovel of their and it is damn good!

[@ULTICLIP]

@@lowkeylowkey1000 Thanks for the feedback. We love titanium but our patented design requires that we manufacture using spring steel to get the retention that people have come to expect from our clips. They are finished in a military grade black oxide which holds up pretty well.

[@lowkeylowkey1000]

@@ULTICLIP Now you made me curious. Patent only restriction or do you think it would work with Titanium but your company does not have a patent for it in such metal? I also understand patents make a difference. On a side note regarding marketing. I seriously think you should market this to people who just want to hold up their pants. I intend to use 4 in this way while leaving my belt wrapped around me holding my EDC items(I wear a lot of leather, I cannot bear the idea of holes in my sheaths etc.)

[@ULTICLIP]

@@lowkeylowkey1000 Our patent applies to the clip design. Also- titanium doesn’t provide the “spring” characteristic needed to create the retention that our clips provide.

[@Flockingtheherd]

I bought one. Quite upset though as it comes with no screws!!!! Now I’m having to deal with this headache of trying to guess which screws will work online and these screws tend to be pretty rare to come by. Ran to Home Depot and bought the smallest Chicago screws they had and unfortunately they’re too big. For future you guys should really include 1-2 screws so people can actually utilize the utiliclip :(

[@ULTICLIP]

Ryan- we try to make it as clear as we can that no hardware is included. Oftentimes the existing hardware can be used and when it can’t or there is no existing hardware, it’s difficult for us to know what size hardware to include knowing that our clips get used on lots of different applications.

[@Flockingtheherd]

@@ULTICLIP okay, I found something that I think will work. And FYI not a single one of your videos mentions hardware, shows the use of hardware, or even mentions that you sell the hardware on your store or amazon. It might be a good idea to incorporate that in a future video. I love the idea of the product it’s just been a pain trying to find something that works with it. I’m currently trying to attach these to an assortment of extrema ratio knives and I finally found a set of Chicago screws that fit however they’re about 3mm too long, I’ll likely buy a set from your amazon store

[@ULTICLIP]

@@Flockingtheherd Thanks for the feedback. Please let us know if we can help with anything as you move forward.

[@oneillam1990]

What brand is that kydex IWB holster you put your clip on? I don't think it was mentioned.

[@michaelschaffer5984]

Excellent. Due to a medical condition I must use the bathroom often. I can't carry appendix because I need to drop my pants often. I carry IWB using a Vedder Lighttuck. The ability to tilt the gun forward allows me to carry a more substantial gun with a longer grip with no printing. Straight drop doesn't work for me. I need a 20 degree cant. That's the resaon i use the Vedder. However the Vedder clip is at it's limit with the weight of my 19. If there was a Ulti Clip that had adjustable cant I'd buy several.

[@ULTICLIP]

Michael- take a look at our Ulticlip 3+. It works on the Vedder LightTuck and cant can be achieved by positioning the holster at the angle you want before securing the holster to the waistband. Please let us know if you have other questions, we’d be happy to help if we can.

[@keeganjacobs5913]

Does the XL wiggle slight bit when clipped on belt since there are 1.50” width and 1.75” width sized belts?

[@ULTICLIP]

Keegan- unlike our other clips, the XL locks AROUND the belt rather than clamping to the belt or waistband. It is designed to work well with a 1.5” belt. We’ve never had any complaints of wiggle/movement from those carrying with the XL... and we assure you it won’t slide off of the belt prematurely!

[@keeganjacobs5913]

ULTICLIP thank you. Another question I had, would this clip allow for ride height adjustment ? Is there a video or picture how to adjust for ride height if possible ?

[@ULTICLIP]

Keegan- because the XL has a slotted hole pattern there is room for ride height adjustment. You can see the hole pattern here: www.ulticlip.com/which-ulticlip/

[@ULTICLIP]

Keegan- also, we tried calling you yesterday in response to the inquiry you sent through our site but the phone number you gave was incorrect. Let us know if you have other questions.

[@keeganjacobs5913]

ULTICLIP thank you. If we use the slotted hole for height adjustment , do we leave the bottom hole without a screw because I would think if we screw the bottom hole , then we can’t adjust the slotted hole correct? The other question , would these work with any holsters out there cause I want to swap my clips for the XL

[@FailWords]

Where do I get a mag holder with ulti clip or one that can take the ulticlip. You guys are good.

[@ULTICLIP]

Mick Bee we have a list of holster manufacturers on our website. Check them out and find the type of mag holder you’re looking for.

[@richyromero2201]

Where can I buy an ulticlip

[@ULTICLIP]

Richy Romero www.ulticlip.com/shop/authorized-dealers/

[@richyromero2201]

@@ULTICLIP cool thanks. I ordered the xl and the crux conceal wing too online

[@williamkerner]

WARNING: Just got them and placed one on my holster. I went to pull out my firearm and I managed to pull my firearm out but it was still in the holster. I tried 4-6 times, making sure that I clamped the clip properly on my pants, I was wearing docker pants. The clamp was secure on my pants and was all the way down but each time I pulled on my firearm the clip came right off my pants. I was so excited and thought this would work, it didn't. When I pull my firearm out I need to know that it will work properly. I'm returning my order!

[@ULTICLIP]

William- We're sorry to hear that our clip isn't working for you. We stand behind our products and we'll be happy to provide a solution. Please contact us through our site and we'll make sure this is resolved. Thank you.

[@Flexapr]

I’m about to buy an IWB and OWB holster from Odin Holsters. Is this Ulticlip XL still the best clip for the uses you described here? Or is there a newer superior model to this XL? I ask because this video is five years old.

[@ULTICLIP]

The XL can be used IWB or OWB (with a belt) as long as the holster is set up to accommodate that. Please contact us through our site or refer to the "Which Ulticlip" page of our site if you have other questions.

[@williamwoolley560]

Great. Do these come set up for Alien Ware ?

[@ULTICLIP]

Are you referring to Alien Gear holsters?

[@ulbushcrafting6592]

Awesome

[@Forever_Bestowing_Incompetence]

MERICA!!!!!!!!!!!!🏴‍☠️🏴‍☠️🏴‍☠️🏴‍☠️🏴‍☠️

[@Traderjoe]

Sold out! Damn, I was ready to buy 4. Oh well

[@JimmyGunXD556]

Sold!!

[@micronious5747]

I bought two of these. No mounting instructions, impossible to use the upper holes. I must be missing something, bcs I’m finding this the worst clip I’ve ever bought. I love the classics I have. I just went to the website; NO installation instructions, only an unneeded template.

[@quickcuts3000]

how fucking stupid can you be?

[@gabaghoul23]

or a paddle holster would just saved you the time for this?

[@ericandi]

Why can’t you use the regular Ulticlip 3 while wearing a belt, but just clip to your pants just like you would without a belt and then when you wear a belt, the belt completely conceals the clip. This would seem like the best solution because you don’t need to switch out clips when go from days where you wear a belt to days where you don’t wear belt. When you aren’t wearing a belt, the top clip part of the Ulticlip 3 is small enough and not easily seen by others. And when you are wearing a belt, the Ulticlip clips directly to the pants and belt goes over top, which fully conceals the clips. The Ulticlip 3 under the belt, seems like the best solution, because if you use the Ulticlip XL both with and without a belt, you have a huge clip that can easily be seen.

[@ULTICLIP]

You are exactly right and that’s why the 3+ has become our most popular and most versatile clip for use on holsters. For those that always wear a belt, the XL is also a great option.

[@Ericec4126]

I'm sold

[@a.d.c7941]

I wish u wouldve been more thorough on how to remove and replace the clip part.

[@ULTICLIP]

Feel free to call or email us if you have questions that weren't answered in the video. We're happy to help.

[@a.d.c7941]

@@ULTICLIP Thank u Sir!!!!!!

[@darinkaintz386]

ESEE knives rule.

[@vicoliva4007]

3:01 funny

[@nickf8524]

Need to make it plain with no logo. Defeats the purpose of concealed with a logo ppl can identify.

[@omnivector45]

The company needs to go back to the drawing board and do a remake. The amount of tension on their clip is a real deal breaker. I would like to see the foot pounds that is required to open the clip. Even half of what that amount is is too much. What were/are they thinking?? All of their customers are King Kong or something?? Dude! Fix it.

[@ULTICLIP]

Thanks for the feedback. Sorry to hear that our clips aren't a good fit for you.

[@omnivector45]

@@ULTICLIP we will find a remedy. Thx!

[@fin_jan]

The clips are good quality. But the obligatory religious symbol is not appreciated. It took me a few seconds with a Dremel tool to fix that problem.

[@billrowan1957]

Sold!