Ultimate BMW Diagnostic and Coding tool! - PROTOOL

[@jcreeker5581]

Thx. Bought a E93. Just getting started with this BMW and using Protool. This video was very helpful getting me started w/Protool.

[@lefty954]

Great information Evan! Looks like I found the way to code/add my sport seats!!!

[@versatilecrytonian6598]

Can I use this to activate the Aux in my bmw e60?

[@Mr.Schitzengigglez]

Damnit... I was hoping I could find retail programming software that could decide things that are car specific, like clusters, or gm5, on the E46.... I think Ill just bite the bullet on the BMW software, as I don't plan on getting rid of my E46, without replacing it with another.

[@djTorchLive]

Are you sure the DCAN cable is included in the bundle? I didn't see anything stating this on their website.

[@johnh7064]

Hi. I have bimmercode and it won’t communicate with the headunit because it’s not in original state. Will protool communicate?thanks

[@yushanzhi5786]

I want to change the head unit of my 2017 BMW x5 to a used one. Can this tool code the head unit to my car?

[@EvanGoyuk]

No but I can code it! Message me on instagram @evangoyuk

[@joefarkasinlandempirereale7711]

Can this tool diagnose problems with the FRM? Can I reporgram/reset my current FRM with the tool? If I have to replace the FRM can I code in a new one? Thanks for the great videos as well!!

[@EvanGoyuk]

Yes and yes and yes

[@11520mike]

Awesome tool. I am thinking of getting one. Question. Can I turn off the Headlight assist malfunction.I change headlights for a newer year. Now I have this error code. Also can I rest parking brake moduel?

[@joebenson658]

Can you program a used transmission module / egs to cars vin after swapping it with this tool ?

[@EvanGoyuk]

Depends what car?

[@joebenson658]

@@EvanGoyuk 2007 bmw x3

[@EvanGoyuk]

@joebenson658 yes

[@thepearratz]

Best Protool video on KZbin! For US E82 I understand Protool can code out TPMS but can it enable RDC which uses wheel speed to calculate a low tire? I understand NCSExpert can but much prefer the simpler (and less error prone) Protool app based approach.

[@BalanBro2]

I think you mean to disable RDC (which is your TPMS system), and enable FTM (Flat Tire Monitoring), but I also have the same question. I heard it can be done by editing Vehicle Order alone if using NCS-Expert, but wasn't sure it would work the same in ProTool, or if you would need to code all the individual modules.

[@kennethseodat2685]

Can this rewrite the vin on my dme and cas3 , that i have replaced on my e90 bmw

[@EvanGoyuk]

No, bench is required. I can help

[@user-zx9ul9uf2r]

Hi good day I like the protool software but I can't use it for some reason i need the license How can i get the all tools and licensed?

[@christophernichols6001]

Can u use this to clear a transmission fault mode in a 2004 bmw 745 li?

[@rickclardy]

I want to know foo

[@andrewah05]

How can I get my VO, ista P can’t find it nor ncs but ista + does

[@maxbradley9534]

Looks really good, better than Carly. However as well as not supporting my E46 as you mentioned it doesn't support my E86 either so not of much use unfortunately. Maybe E86 (and E85) will also be added soon too?

[@EvanGoyuk]

Hopefully support is added soon since it’s a very helpful tool

[@Linoge279]

does it have a programming software like Winkfp? like when you replace a module for example on E60, the KBM module which need to be program first before it is being coded

[@damon123jones]

top 10 hair on the internet 😁❤❤

[@markhill1353]

Hi Evan I'm in the UK, have been looking for diagnostic stuff for my own use this looks ideal for my 2008 320d as the tpms light is on and no sensors on my wheels so I can not turn off the tpms system it would be worth if just for that, also would be great to sort out my DSC fault which also does my head in, this looks way better than the icarsoft system I've been looking at and alot more costly so I'm getting Protool. 👍

[@EvanGoyuk]

Yea ProTool can take care of all this!

[@napoli.4life]

I know this is an old video BUT does this protools access modules such as a EGS module or tranfer case control module etc and if they are in limp mode or there is no message from them can you reset it with protools ...... followup question is if i have to get an used or new module , can protools code the new module to the car ( or re vin im not sure what you call that process after putting a new module in you car )

[@dragosrmn9400]

Hello, great video, i was wondering, can this code features like cruise control if i install the cruise cluster?

[@EvanGoyuk]

Yes

[@natking1u1z99]

Let us know when they have a promo

[@forgiv3191]

So it doesn't work on e46?

[@EvanGoyuk]

Not yet

[@JusTCheap15]

Does it work now???

[@cowlumbus]

I come from the world of VCDS so this is a bit new to me. This video is 2 years old and it still does support e46 cars? Does the cost of this include the dongle/BT or just the software and then do I need a specific type or style of dongle/BT?Thx!

[@graham5710]

Hay well it'd been 2 years can you tell me if it works with E46 yet, and can you turn things like, opening the windows with the key. Thanks Graham

[@hvbmw6032]

Question for you, now you just explained that this tool codes new futures into the car. Now, does this app recodes a new module? As in if I installed a new headlight module, will it reprogram it and teach it to the car? Thank you

[@aaronm.9438]

Great video!! Smashed the like and hit a couple links. Need to find a universal OBD (bluetooth) that will work with it next. Can it code new EKPM3 (Fuel Pump Control Modules)?

[@EvanGoyuk]

Yes

[@M6BrokeMe]

Is the license for one single vehicle or multiple vehicles? Also, does it work for the e83? Lastly, how long does the license last?

[@EvanGoyuk]

Multiple vehicles, yes, life time

[@RTB-1157]

How do I delete the oil reset in the kombi when it's reached its maximum number of resets? I.e over 300k on the odometer! Thanks cool video 👍

[@Vgk36]

You figure it out?

[@stanleypierre_louis2308]

Hey Evans I am having an issues with my e90 so long story short my 06 e90 sat for a good year or more didn’t want to start so I noticed that the wiring harness need to be change crank sensor relays battery has been changed so after we put it back together I got it to try to start but nothing just a click I think the starter is no good my buddy said he thinks it’s the computer I had a technician check the car no answers with more money our the pocket in short I need help plz

[@EvanGoyuk]

Can you scan the car?

[@stanleypierre_louis2308]

Evan Goyuk yes it came back as starter fault again even after the new starter

[@EvanGoyuk]

That’s odd what the exact code?

[@DBaddis]

Can code out led bulb errors?

[@EvanGoyuk]

Yes!

[@tajzombie]

Can you use this app to reset the ELV Counter in E90 models?

[@EvanGoyuk]

Yes

[@mack3turbo]

Does it work on E46? Also does it allow you to delete the ews?

[@indyindyy2946]

Evan, how do I flash a TMS module. My blinker doesn't turn on, so I purchased a new TMS module but don't know how to code it using ProTools.

[@EvanGoyuk]

VO code itb

[@markhill1353]

Hi Evan, I cocked up I've done an ecu reset due to faults I couldn't reset hoped ecu reset would solve issue but now car won't even start how can I revert ecu to previous state if I can with Protool thx.

[@EvanGoyuk]

What tool did you use to reset the ecu? ProTool?

[@markhill1353]

@@EvanGoyuk I've used tho Protool

[@EvanGoyuk]

Message me on Instagram @evangoyuk

[@nikreh5240]

Say I purchased a used airbag module, would this be able to code it to my car. I have a 2010 Mini Cooper. Thanks!

[@isokeowon6785]

I had my factory radio changed on my 2007 335i Coupe and when I got the car back my voice command feature no longer worked. Can I use ProTools to re-enable it?

[@EvanGoyuk]

Yes

[@clueso777]

Hi just came across your video liked and subscribed. You seem an expert. I was hoping I can ask you a couple of questions. I have a 2004 e60 with zero issues from a software and electrical point of view and I must say I am a very risk averse person and a bit of a novice when it comes to car and software but cars have become a weighs hobby and I would love to experiment a bit more. I would love to code a few simple things such as tv in motion, folding mirrors, removing disclaimer message etc. Question is given I have no issues with my car do I risk damaging my modules with this software ? Is it safe or have there been instances modules have been bricked? Would greatly appreciate your views.

[@EvanGoyuk]

You will not damage your car coding it if done right

[@clueso777]

Evan Goyuk thanks! Any particular things I should not do then?

[@carlosc-in5oo]

also, if it does work on mini coopers, how far back does it go? (year)

[@user-zx9ul9uf2r]

How can i switch on the fuel pump on the E90?

[@osvaldomora7827]

When are you doing a second part of how to use INPA and Nc Expert

[@EvanGoyuk]

Soon

[@bryandiaz3108]

Can you do tool 32 resets?

[@justindebrum6755]

I had a windshield replaced on a e92 can pro tool reinitialize the sensor?

[@EvanGoyuk]

Yes

[@haseebrehman5823]

Would this tool allow me to read real-time data for sensors and ECUs. I am trying to diagnose if my climate control unit is faulty or is it a faulty ambient temprature sensor.

[@brainfleming8756]

You didn't show anything about connecting to the vehicle. Do you need to install drivers to make the K+DCAN work with the phone?

[@marcarvizo140]

Amazing as usual...... Im planning to do all of your retrofit mods on mine in the near future at least now I have a good ref. Are you considering to do the euro headlight auto leveling mod or not worth it ?

[@EvanGoyuk]

Auto leveling is standard in the US if you have Xenons

[@marcarvizo140]

@@EvanGoyuk TY

[@fredbarton6924]

Need Help just bought the Master License of Protool need to code a new TMS Module for left Adaptive Headlight could use a step by step instruction on how to do this messed around with adaptive headlight error now have no Angel Rings on at all how to fix

[@ericmyers4982]

2011 X5 35i 😔 Need a scan tool & coding option. I'm new to the entire BMW group. How can I purchase the latest update of this tool?. 🙄 just discovered this thing is nothing like my 1991 foxbody 😬 Help me out team

[@SONSOFB1TCHES]

Can this reset the short circuit counter on a frm3r foot well module?

[@EvanGoyuk]

Yes

[@MsSimeone1]

Hi, would this work with a gearbox change from 525d to 520d?

[@ActiveDutyInvestor]

Does it see transmission oil temperature? Can't find anywhere with a list of items.

[@kbruin79]

Nice video. Can it do output test? for example if I want to test a valve, a pump or a fan is working. Will I be able to activate them?

[@dylancereceres6770]

yes

[@huanweili7699]

Can this app do coding/registering new fuel injectors after replacing them on a e92 335i?

[@EvanGoyuk]

Yes

[@beforesummercoming1481]

can this app reset or calibrate valvetronic after replace ? e90 2006

[@EvanGoyuk]

Should be able to

[@beforesummercoming1481]

@@EvanGoyuk ok ,thanks bro

[@omdcarsandairplanes]

Could it code to disable the ABS light and 4x4 light on the e53 x5?

[@rickyamar8539]

How do you reprogram door module vin number Eg changed door module which was on a different vehicle and now you install in your vehicle which carries a different vin

[@JosephusXIX]

Is BMW Standard Tools essentially an older software for coding and diagnostics and is somewhat phasing out?

[@digitaldav1]

Will protool code new injectors on BMW 335D E90? M57 engine..

[@carlosc-in5oo]

i was told that it works on mini coopers, yes, no?

[@KennethBostonian]

I’m going to replace my right rear shock with adaptive active drive. Can this software code after I replace?

[@DAMCARTER1]

Hey Evan, can I use any Bluetooth adapter with this tool or do I need bimmergeek adapter?

[@wagoneer401]

Hi - will Protool recalibrate a SAS? If I need to change the SAS with a good used one will Protool code the replacement SAS to the car and how would this be accomplished in the Protool software?

[@afyonsandikli]

Hello can I register another ekp relay on my car with protools please?

[@isrealperez9069]

Can you use it to install the BMW alarm

[@tamiakins8977]

Will this allow me to code in the SAT for my radio in a 2008 X5? Module is in but SAT is not showing in radio

[@richardschwindt522]

Is it available for IOS?

[@jimmyyoung2866]

can this app program a new key fob . my original key fob wont unlock or lock doors. it will only start car so I want to get a new key to program. any help will be greatly appreciated

[@EvanGoyuk]

No but I have a video on how to program your key

[@kennyk4706]

Need help getting cable from phone to car to read.

[@syxxwilliams]

does it support e63

[@bmwloverforlife8091]

@ Evan Goyuk if you have a problem with your I drive do you know if this will come up with the code of what's really wrong? Reason I am asking is I was planning to get a autel im608 but if this can read the code of my I drive and is way cheaper I will just get it.

[@EvanGoyuk]

Yes it will give you codes for everything that is wrong with your car

[@bmwloverforlife8091]

@@EvanGoyuk I truly appreciate your reply, I will purchase one right now and I will subscribe to your channel right now!!!

[@EvanGoyuk]

Thank you sir!

[@firehawk6230]

Will this app let you code mk60 module?

[@EvanGoyuk]

It doesn’t support the e46

[@user-yv7rg7ng5u]

Hi Evan, I'm in Ireland and have a 2008 pre LCI E90 320d with the N47 engine. Will this cover all aspects of my car? I have a Carly tool, but this will not code injectors or tell me the code for each injector. Many thanks, Rob

[@dylancereceres6770]

it was able to code e90 335d injevtors

[@vinniesworkshop5267]

Super excited until I found out it doesn't yet support the E46. I hope they add support soon. Great Video tho.

[@EvanGoyuk]

Me too it’s super easy to use and e46 owners would greatly benefit from this

[@user-zx9ul9uf2r]

I like he's job

[@TeyronP]

Should I buy this to code a new SAS on my e83 x3? I recently bought and installed a new one and when I try to calibrate it on my Ancel bm700 it says calibration couldn't be completed. Could this be a coding issue? Its responding when I live datastream it so its working, just isnt working properly. Please any insight would be greatly appreciated!

[@remyhelu9397]

Evan i have purchased the protool need to program my diversity antenna and don't know how, would you please help

[@brianpevehouse1150]

I did some coding on my convertible top e93 so I can put it down why in motion. Now when I try to put it back up outside the car with the remote it stops halfway. I have to get in the car and use the switch to finish closing the top. From outside the remote rolls the windows down and puts the top totally down. Not sure why it's not going up all the way with the remote from the outside any help on what I'm missing.

[@EvanGoyuk]

Are you holding the lock button the whole time while it shuts?

[@brianpevehouse1150]

Yes holding down the button the entire time it stops exactly halfway. If I open the top holding the button the whole time it completes the cycle. I'm just having trouble with the close. Very strange. Before coding it worked fine from the key fob open and close

[@EvanGoyuk]

Any codes?

[@arifguran4924]

Which extra functions can i activate to my e46 car by this app?

[@amedsoprano]

Can I reset the adaptations on a mini r56 n14?

[@luismaldonado6542]

Can I configure EKP module if I changed for a new one?

[@EvanGoyuk]

Yes

[@Waynelon3]

dose it reset limp mode on E66/E65

[@ooak2478]

Can you change the vin after transmission swap

[@victoranguiano7401]

Did they add e46 and e90 yet?

[@EvanGoyuk]

E90 yes..e46 not yet

[@nattadam4171]

Can it program new blank keys?

[@EvanGoyuk]

No but I can help message me

[@SINasTER75]

Does ProTool work with the Veepeak OBDCheck BLE Bluetooth 4.0 OBD2 Scanner Adapter?

[@EvanGoyuk]

I’m not sure on that, I would check their site

[@SINasTER75]

Evan Goyuk I contacted them and they said they didn’t tested it and since they have design their own Bluetooth dongle they won’t test others

[@user-ri6fg4ui3n]

how do i code the kmb module ??

[@BOO5Tchannel]

Can you code a manual swap on a E82? I have the Protool but curious if that's possible?

[@dylancereceres6770]

im looking for same thing i believe you just have to delete the auto trans from vehicle order but not sure about adding anything in

[@PHATJANUS]

Can it flash Alpina transmission or PPK DME flashes?

[@amauryjay4]

Can you use this to code a digital speedometer?

[@EvanGoyuk]

Yes I show it in the video

[@funkanic06]

Hello mate would this app help me find my dtc fault?

[@EvanGoyuk]

Yes

[@aaryadeb893]

Can you update DME or EGS modules using Protool?

[@mathewross-brooks5164]

How do I reset my steering angle sensor with the inpa on my BMW E46?

[@RTB-1157]

I think it's in chassis-steering angle-calibrate hit OK 👍

[@darrellmccaslin3701]

Hi Evan...does this support E65?

[@alaaddinzeidan8367]

Hi How I can order it I need this to help me with my customers

[@EvanGoyuk]

Link in description

[@martinsuter3240]

can i coding the FRM MODUL on the F-Model BMW?

[@cyrusgill1594]

What about 2016 bmw 528i xdrive headlight adaptive headlight

[@dsablk1]

How much does the software bundle cost?

[@zacharysementelli1098]

Can I bleed brakes as if thru inpa??

[@notadoctor2598]

Hello from the future there is still some German when you get deep into the programming feature I mean long nasty 22 letter words

[@capeofstormz5974]

Can it repair the FRM module ?

[@EvanGoyuk]

It can code a new one

[@capeofstormz5974]

@@EvanGoyuk My FRM got damaged due to a bad battery.They fixed it (not sure if they used INPA etc.) but it took +- 5 minutes to repair.Can Protool fix an FRM that was damaged in this way? It was a short-circuit I guess.