Ultimate Guide To Rebuilding Iveco Daily Rear Suspension For Your Camper Van (pt2)

[@Iveavan]

Link For Part One of the Rear Suspension Improvements & Upgrades. (Cribbing-blocks, Rear Leaf Spring & Shock Absorber Removal. 👉 kzbin.info/www/bejne/aKeYeGaifMdpi9k Parts used within the video are in the 'video description'.

[@jameseddison5356]

Any one wanting to do this work needs to follow yr vid mark as always clear methodical and precise with view content description and reasoning out the issues. If didn't know u were an engineer would assume mad professor status. Great vids. Je

[@Iveavan]

Or just 'mad' 😅... Cheers Je 😉👍👍👍.

[@yr4137]

Your video and your job are priceless. Thank you.

[@Iveavan]

Thank you, matey 🙂👌👍...

[@onemanandhiswhippet]

Excellent job mate as always 👍👍

[@Iveavan]

Thank you matey 😎👌👍👍👍.

[@mikebailey2509]

Very clean underside Mark. Great video 👌👍

[@Iveavan]

Cheers Mike 😎👌👍👍👍.

[@paulthompson5416]

Not only has the old girl had a facelift she’s now had a bum lift as well 😂😂 Top job as usual mark a very methodical video on the works 👍🏼👍🏼

[@Iveavan]

Haha😅 thank you Paul 😁👌👍👍👍.

[@MACK13]

Got the notification bell.... Made a full English with a strong cup of Barry's tea, then sat down to eat while watching your excellent detailed presentation. Mint 👌👌👌 Thanks so much for taking the time to film and share. Mack and Maggie, Huddersfield

[@Iveavan]

Excellent! Hope you've enjoyed the Full English guys 👌👍👍👍.

[@Astra8676]

Brilliant video mate, in-depth explanation. Also, like the new welcome intro to the video.....

[@Iveavan]

Thank you matey 😉👌👍👍👍.

[@iwandernotlost98]

Great to see the care and attention you give the underside of your van Mark. It looks immaculate 👍 The part where you say I've messed up my paint work says how much effort you put in to the van, nice!👌 Thanks for a great Vlog 😎👍

[@Iveavan]

Ahhh cheers matey 😎👌👍👍👍.

[@ivecamperbuild_thomas4084]

A great video Mark I bet you had some fun doing the front spring on your own ,

[@Iveavan]

Cheers Thomas 👌👍. Yes, it's been a 'headache' 😂😀👌👍👍👍.

[@northeastcarpfishing]

Great in-depth vid again mate thanks

[@Iveavan]

Thank you Rod 😉👌👍👍👍.

[@moonies414]

Well done Mark. What a great job again keep up the good work mate

[@Iveavan]

Cheers matey 😎👌👍👍👍.

[@philipevans1027]

Your building a knew iveco respect m8

[@Iveavan]

Yes, I've probably touched every nut and bolt upon this van now bud 😅😉👌👍👍👍.

[@leeoneil2852]

Excellent tutorials. Much appreciated thank you.

[@Iveavan]

Thank you Lee 😉👌👍👍👍.

[@bogged9820]

Looks top-notch mate!

[@Iveavan]

Cheers matey 😉👌👍👍👍.

[@barneyrubble32]

Another great video mate 👍

[@Iveavan]

Thank You Gary 😉👌👍👍👍.

[@scousewithnohouse8235]

I've just downloaded this for later buddy. Very informative videos mark. Well done,. Keep up the good work and best of luck.

[@Iveavan]

No worries cheers matey 😉👌👍👍👍.

[@phantomflyer952]

Tha on par with Kevin Albert Williams..look him up he's a iron man with what he does,and so r you..another good video take care pal

[@Iveavan]

No, I've not seen him, but will do, cheers matey 😉👌👍👍👍.

[@francishagen8508]

Another great video. Thanks 😊

[@Iveavan]

Cheers Francis 😊👌👍👍👍.

[@antmck33]

Nice one Mark, just watched over lunch. Much more familiar with the back end now thanks to your videos. Can't wait to watch the front 👍🏼 Be good to know how much difference to the ride that you notice after the lot is done.

[@Iveavan]

Cheers Ant 👌👍. Yes, so would I. It can't be any worse than it is now mind you 😅🙂👌👍👍👍.

[@richiebainbridge2608]

You are a crackin tutor. Nice video.

[@Iveavan]

I never thought about it like that 😅. Thank You Richie 😉👌👍👍👍.

[@monchito1999]

Iveco is very good truck

[@Iveavan]

Yes, They are made like Tonka trucks 😊👌👍👍👍.

[@lyndonwebber1389]

Great video mate , I’m still on my iveco struggle, full paint job before fit out and many, many other jobs ! I did put a few vids on of mine and realised quickly I’m not that good at camera work ! Maybe see you on the road one day, you said to me it took you 3 years for you build, now I can see why 👍

[@Iveavan]

Yes, it's very time consuming when your filming it too things take 3x longer. In the end of the day, slow and steady wins the race bud and hopefully see you and you're Iveco out on the road in the near future matey 😎👌👍👍👍.

[@lyndonwebber1389]

@@Iveavan it’s getting close now starting to get back into it, I was loosing the love for a while, I’m always getting pestered welding other peoples stuff ! I will do another rough video when I get plastics back on 👍all the best

[@antmck33]

​@@Iveavan iveco daily meet up this year? 👀

[@claretbuck1882]

Top job bud 👌🏻

[@Iveavan]

Thank you matey 😎👌👍👍👍.

[@doglabdogtraining-gus.8873]

Great video thank you

[@Iveavan]

Thank you 😀👌👍👍👍.

[@markspiby84]

Amazing videos mate. You not using the compressed air suspension for the rear anymore. I have an a iveco daily 2006 and suspension is shocking and will try and copy your set up

[@Iveavan]

Cheers matey 😉👌👍Yes, still using the air assist suspension definitely worth doing as it totally changes the ride 😊👌👍👍👍...

[@scousewithnohouse8235]

My next upgrade job after all my welding is done and the m.o.t is done

[@anfieldroadlayoutintheloft5204]

good vid thanks lee

[@Iveavan]

Thank you Lee 😉👌👍👍👍.

[@jay-hv6mc]

Excellent work mate. This might sound ridiculous and tell me if so lol, but could you do this job without jacking the van up and leave the wheels on , just stationary so to speak ? I know it would be a little tight under there but would everything stay in place so to speak and be possible to change spring, bump stop and shocks ? Would I need some jacks with timber under chassis to hold the weight of van whilst shocks and springs are off ? like how you did with the big block ? Thanks

[@Iveavan]

It's not impossible the way you want to do it bud, but like you say it would be tight and probably, the wheel would get in the way. Yes, you would need a axle stand and a jack to lift and take the weight of the chassis off the axle to carry out a Leaf spring change. Good luck 😉👍👍👍.

[@jay-hv6mc]

@@Iveavan okay cool that's really helpful and handy to know!!! Limited space and resources here atm so just weighing my options and possibilities up. Thanks again mate I appreciate it 👍

[@Iveavan]

No worries bud 👌👍.

[@Ronmillington]

Hi mate just found your video great stuff I have a iveco daily lwb the front hanger for the rear leaf spring on both sides of mine are completely rotten and I can’t get them anywhere don’t what to get rid of the van the engine and gear box are in excellent condition do you have any idea where I might find them cheers

[@Iveavan]

Have you tried Zeppelin or Bison? They may do them 🤔. Only other alternative would be an scrap yard or someone who's braking an Iveco upon Facebook marketplace bud 👌👍👍👍.

[@Ronmillington]

@@Iveavan cheers mate I will have to keep searching 👍

[@Iveavan]

Good luck mate 😎👌👍👍👍...

[@michaellutherdavies]

my mounting points are broken any idea where i can get the part numbers 2005 ivevco dail box van thanks for any help

[@Iveavan]

From memory, zeppelin or Bison parts should be able to help you out if it's the front mounting point bud? 😉👌👍.

[@Iveavan]

www.cheapivecoparts.com bisonparts.co.uk/

[@kevinhughes9801]

Brill stuff looks like a pain in backside of a job tho lol

[@Iveavan]

Wait for the front suspension video, now that's an headache of a job to do 🤕😅, cheers matey😄👌👍👍👍.

[@kevinhughes9801]

@@Iveavan oh lol look forward to it

[@YANDEX30V]

Heyya. Youve made this look a total breeze. I cant get over your efficiency. Not a second daliancing. Its refreshing to me a procrastinator.

[@Iveavan]

Thank you, Isabel 🙂👌👍👍👍...

[@makolder4956]

Hi great video where did you get the leaf spring u bolts from please

[@Iveavan]

They come with the leaf springs ( Jones Spings. The link should be within the description ). Or you can buy them separately from Autodoc. 👌👍.