ULTIMATE How To Flush Your Vehicles Cooling System | MOST OLDER FORD VEHICLES

Step by step instructions on draining and super flushing your vehicle's radiator and cooling system without cutting any hoses!
#fordtrucks #bronco #coolantflush #radiator flush
If you've enjoyed the content and feel like supporting the channel, it won't cost you a cent, as you can simply just donate some of your time by allowing the ads to play through. Doing this will help out a lot and that’s how I make a tiny bit of revenue. More revenue means more How To Videos!! 👊🏻😄....... Please don’t ever feel as though you need to watch the ads if you don’t want to. Simply skip them and move on to the video- it’s completely up to you and I understand if you don’t have the time to do so👌🏻😁👍🏻 Thanks again for your support!!
Follow along on:
/ broncosandparts
@broncos.and.parts on Instagram
Email : [e-mail]
We sell used Ford Bronco and Truck Parts

[@BroncosandPartsGarage]

Please Remember To Top Off Your Reservoir With Straight Coolant to Offset the Water In Your Block or Check With Hydometer and add or remove coolant as necessary.

[@ghosttowntreasurehunter6089]

They make concentrated coolant for this reason. When you flush you system out with water a few times and drain the radiator for the last time, the cooling system is still half full of distilled water. When you add 50/50 mix, you end up with something like 25/75 coolant to water ratio. Just a little word of wisdom. I have a 94" F-350 Crew Cab with the 351W in it and love it. Thanks for the videos.

[@c.holliman1871]

Finally someone shows me which way to turn the Drain Plug!!! Smiles....

[@BroncosandPartsGarage]

Glad we could help

[@michaelanthonydevita5394]

Thanks learning how to be a backyard mechanic m you made this super easy!

[@BroncosandPartsGarage]

Thanks.

[@Dutch1951x]

Loving these videos, thanks again!

[@tylercfranks1988]

Thank you so much just did this and your video helped a lot

[@BroncosandPartsGarage]

Thanks for watching

[@BroncosandPartsGarage]

Please don’t forget to subscribe for more content !!

[@rocketnoob392]

what is the coolant capacity? I have a 96' Eddie Bauer. Great video!!

[@BroncosandPartsGarage]

@@rocketnoob392 15-17 quarts. But quite a bit remains in the block after flush. So add extra straight coolant.

[@WalterMelons]

How many gallons does this take for a full fill up? I ended up buying the concentrate not the ready mix of antifreeze but I only got one jug. Not sure if I’ll need more.

[@BroncosandPartsGarage]

About 14 quarts.

[@viktorkamenov7604]

Great video! Do you think I can do the same to my 96 Tbird?

[@BroncosandPartsGarage]

Absolutely

[@joseespinoza93]

My 1971 maverick is still dog shot brown after 6 flushes. I need to just sticks. Hose in it and super flush them replace radiator and hose?

[@BroncosandPartsGarage]

Try flushing the heater core

[@Danvers97]

Once the radiator is full then did you fill the coolant reservoir

[@BroncosandPartsGarage]

After we drive it for a few miles

[@humbertorios2383]

How many gallons of distilled water did you need for this flush??

[@BroncosandPartsGarage]

50/50 mix with coolant. Depending on ur climate

[@grantcarmer4059]

how many gallons of distilled water did you use for this? need to know how much distilled to buy so i’m not making multiple trips to the store

[@BroncosandPartsGarage]

Depends on your climate. If you’re not using premix, you do need to compensate for the amount of flushed water left in the block.

[@grantcarmer4059]

@@BroncosandPartsGarage South Carolina so pretty hot i’m assuming about 60/40 for it? Also, did it take 14 quarts of water every time for each rinse?

[@peterson94647]

How much water did you use for each fill??

[@BroncosandPartsGarage]

final fill I mixed it 60 anti/40 water to offset any water left in the block after final flush.

[@Glock274Jimmy]

That’s not enough to offset the amount of water left in the block. A better method is to use concentrate and add half of the capacity and then top off with distilled after that. This way you know that you got enough coolant in the system.

[@adlersharp]

Step 1: Let your vehicle warm up. Step 2: Let your vehicle cool down. 🤔

[@BroncosandPartsGarage]

Thanks for watching. A mechanic knows exactly what I mean.