Ultimate Manual Tire Changer DELUXE - Assembly Instructions

*The Ultimate Manual Tire Changer DELUXE is different than the LITE version*
View the entire collection at lucidautowerks.com/collection...
**Check out some customer uploaded videos**
Mount/Dismount Tire on Steel Wheel - • Tire Mount/Dismount on...
Mount/Dismount Tire on Aluminum Wheel - • Hand Mount/Dismount of...
Helpful links:
Manual Tire Changer Stand - amzn.to/3C09cOr
Red "Hunter Style" Duck Head - amzn.to/3QlCsnp
Hunter Style Duck Head Flange - tinyurl.com/5bxv2b2j
Black "Corghi Style" Duck Head - amzn.to/3dubpYr
Corghi Style Duck Head Flange - tinyurl.com/368r96x6
Rim Clamp - amzn.to/3w1xrIp
Rim Clamp (2 Pack) - amzn.to/3zWdtzL
Rim Clamp (Alternate Style) - amzn.to/3w1JG7Y
Rim Clamp (Alternate Style 2 Pack) - amzn.to/3QptsNR
Manual Bead Breaker - amzn.to/3c0vchB
Link to the original video:
• Ultimate Manual Tire C...
Check out lucidautowerks.com/
Questions?
Email: [e-mail]
Mailing address:
PO BOX 840146
St Augustine, FL, 32080
#UltimateManualTireChanger

[@youuu4307]

Great job !

[@javybeaz3236]

I made my own like 3 yeara ago, still use it today. . I also have the HB lower parts

[@trueitbycjtruitt9546]

Thanks for sharing, good video 👊😎🤙

[@LucidAutowerks]

Thanks 👍

[@Ray-ce4tf]

I see a lot of people complaining about the price but if they had to go buy all the equipment that you have to make the product, they would understand it. Your tools are not free. not to mention you have labor involved. I like your product I think it’s very professional looking and it is a made for a lifetime accomplishment.

[@LucidAutowerks]

Thank you! It’s refreshing to see someone that actually understands. Even without the labor involved, the cost for me to build the “top of the line” version is more out of pocket than most people would like to see it retail for. That’s why I developed the LITE version that retails at less than half that price. Even the LITE is a bargain and the feedback has been great so far. I strive for perfection with each kit and I think the end product really shows that.

[@williamhanna5224]

Excellent !

[@alaskanjade9951]

Can you make one for center post coats 4040?

[@Byu50]

Would this work on a 20” wheel?

[@AngelArsFoundation]

Do you sell the bushings?

[@user-nm2rm2yl3q]

what are the part numbers for the bearings please

[@kitchenfamily5800]

Awesome video 👍

[@LucidAutowerks]

Thanks!

[@JohnnMorales]

Cómo puedo conseguir uno de esos me gustó mucho

[@richc9631]

I need that attachment! 🥺🥺😆

[@Corfine]

Ireland they not have them on sale

[@tacticalofficer6103]

Hi Mike how long will it take if I want to purchase the welded Ultimate Manual Tire Changer ???????

[@Mackze]

Is there a difference between the red and black duckheads that come with the lite and deluxe versions? Like is one better for low profile tires etc?

[@LucidAutowerks]

I haven't found much of a difference. One of my customers did make a video comparing a few styles - kzbin.info/www/bejne/q6G0npqNqZ2FeMksi=FJAgC1hAEriaKbDu

[@ASHADUMOHAMMED-wh6cu]

How aer you doing sir

[@MRBLACK947]

Beautiful product. I was all set on buying the cheaper usa version on ebay (guy in texas) but I may hold out and spend the extra for yours. Does your DIY builder version have the long lead time as well? Also as someone that does fabrication on the side, I totally understand the price point of your kit!

[@LucidAutowerks]

Thank you! I moved into a larger space and hired some help, so I’m slightly ahead of the timeframe listed but I didn’t want to change it and then start to fall behind. Shoot me an email at [e-mail] and I can get into more detail about turnaround with you 👍🏼

[@tulrob]

That looks so much stronger that the spindly looking one I bought online...your add on looks like an engineer built it..

[@summitdave8782]

Fun times......

[@garyp1930]

i just ordered the lite .. i need by jan 10 any way possible , i didnt see 30 day wait

[@garyp1930]

Thank you!! He came thru got it.. Works incredible, looks incredible too.. A1 everything.. Good man

[@jjay7262]

I am interested in a complete machine how to order boss from Jamaica

[@FromThe3PointLine]

How much longer till you release the stainless steel version of this?

[@LucidAutowerks]

I powder coat them before shipping. Stainless would be cool but would be very expensive to make.

[@judelevesque7432]

Am from Canada and like to buy one do you sell this item to Canada 🇨🇦

[@LucidAutowerks]

Please send me an email at [e-mail]

[@joelortiz8997]

I want to buy one

[@LucidAutowerks]

You can find them at manualtirechanger.com 👍🏼

[@khademghasemi544]

Hallo guten Tag ich möchte gerne ein Stück kaufen

[@fidencioortega9506]

Were I can faun the kit can you tell me please

[@LucidAutowerks]

You can find them at ultimatemanualtirechanger.com

[@dalemea611]

How much and where can I buy one?

[@LucidAutowerks]

All of the different versions can be purchased at - lucidautowerks.com/collections/ultimate-manual-tire-changer

[@ninonery6357]

Where & how can I order

[@LucidAutowerks]

The kits can be found at - lucidautowerks.com/collections/ultimate-manual-tire-changer

[@hectorhernandezperez6140]

Donde puedo comprar esa cosa y cuantos us dólares cuesta?

[@LucidAutowerks]

You can purchase through this listing www.ebay.com/itm/294105625370

[@SylvanNaransammy]

Hi how much is it do you sell it

[@LucidAutowerks]

You can find it at lucidautowerks.com/

[@dantedatu8541]

I want to buy one..

[@LucidAutowerks]

They can be found at ultimatemanualtirechanger.com

[@joaocordeirocordeiro6036]

Onde eu compro esse conjunto

[@RandallStephens915]

el enlace está en la descripción

[@ninonery6357]

How much does it cost?

[@americanrealitytoday]

$400

[@sandwichgaming8510]

Where dose the spacer go

[@jrvd64]

It it sold anywhere in Europe?

[@LucidAutowerks]

Only if you order through ebay - www.ebay.com/str/lucidautowerks

[@jrvd64]

@@LucidAutowerks thanks for your reply. I was told that this setup will not work for run-flat tires. I am driving a BMW with 19" run-flats so may not be suitable for this right?

[@LucidAutowerks]

@@jrvd64 yeah you'd have a heck of a time doing run-flats since they have a super stiff sidewall.

[@modded_a.m.a]

Would want to see it in action

[@LucidAutowerks]

I need to make an updated video. All I have is the original design before I started selling it. Some parts have changed but it’s still the same principal - kzbin.info/www/bejne/oqeueJ6ebrpkj9E

[@juliocadavos6886]

How to order Boss

[@316Garage]

where to get in Amazon?

[@LucidAutowerks]

Sorry, I only sell on my website and on ebay - lucidautowerks.com/collections/ultimate-manual-tire-changer

[@leminako]

​@@LucidAutowerksdo you send to Europe? How much shipping costs for Belgium? Thank you

[@valirgaming7580]

How to order

[@LucidAutowerks]

The attachments can be found at - lucidautowerks.com/collections/ultimate-manual-tire-changer

[@cuanbarlow2323]

It’s kind of expensive when the actual tire change machine cost like only $100

[@LucidAutowerks]

@@cuanbarlow2323 not sure how one is related to the other. Using the manual tire changer saves on overall cost since I don’t need to make that part. Saves on shipping too. I pay more to make each kit than the manual tire changer from Harbor Freight costs to purchase. A lot more.

[@abigailbautista6710]

Como lo puedo conseguir

[@LucidAutowerks]

You can purchase here www.ebay.com/itm/294105625370

[@billhenning]

For the amount of rotation need to change a tire (1 rotation per side, if that) the bearings, races, and collars look like overkill and add a lot to the cost and complexity of this design.

[@LucidAutowerks]

I sell a more basic version with no bushings and bearings. If you’re doing low profile tires, all of the bearings, bushings and collars are a must.

[@michael931]

​@@LucidAutowerkswhat is the function of the top lock ring and needle bearing? What would cause the tool to try to lift off the post?

[@ASHADUMOHAMMED-wh6cu]

Hello

[@lar4305]

I wonder why harbor freight doesn't make this add on to this tire changer. I bet they would see the shit out of these things if they did.

[@scottykilmer]

The harbor freight unit is just a pile of junk. Yes you can put this on top of it but you still have the junkie bottom. Realize the part that breaks the bead from harbor freight is a pile of crap which both bends and wallos out the rod that you push against when you try to break the bead in the tire. This add yeah on is fine for taking off tires and putting new tires on. But it does not address the fact that the harbor freight tire changer and all the other ones sold at Walmart which are the same. Chinese crap are basically rolling piles of junk. Putting a good top on one is fine, but it doesn't fix the underlying problem of cheap Chinese crap with thin steel that bends and brakes very easily

[@lar4305]

@@scottykilmer It's $49. You act like you are spending $500 for this machine. I have been using this tire changer with my homemade modification and it works fine. I used it to change the tires on all my cars with no problems. Sure sometimes the beads are hard to break, but it will get the job done. Its not made for a tire shop, its for home use. Just make some changes to it to beef it up and it will be just fine.

[@carlharris3537]

​@@scottykilmerù

[@joek4238]

@@scottykilmer of course Scotty Kilmer is here with the worst take.

[@1925sk]

You can get better ones if you shop around. I bought one 15 years ago , and it doesn’t have that problem. If you have basic metal working skills this is an easy fix.

[@user-uv9qh5jy4r]

hi how to buy? and how much?

[@LucidAutowerks]

I have a few different versions that can be found at - lucidautowerks.com/collections/ultimate-manual-tire-changer

[@sammaglitto8922]

What needs to be welded ….?…

[@LucidAutowerks]

This is the main welding instructions kzbin.info/www/bejne/iGq4lJqKZtqDma8 and this is the instructions for the updated center guide kzbin.info/www/bejne/j5awh5iuZq5okLM

[@hajilhoque310]

Hi

[@jooper99]

30 days processing??? Seriously???

[@LucidAutowerks]

Unfortunately it’s just me doing everything and I have a ton of open orders to process. I’m not happy about the turnaround time either. I’ve been up till 3am almost every day for the past month trying to get orders out. I’m making moves to speed up production but it takes time that I don’t have to spare.

[@joek4238]

dude is a 1 man operation. If you don't like it, see if you can process your own in 30 days.

[@blackout7615]

Someone buy this guy a man size hammer. Or he could align things and get it started with his hammer and then use the weight of the overarm to settle things in place.

[@LucidAutowerks]

I have plenty of hammers. I just grabbed what was nearby.

[@Abdulaziz-ch2rx]

ADRES.AAPO