Ultra Efficient Dual Fuel Bosch IDS 2.0 Heat Pump and Carrier 96 AFLU Furnace

Looking for the best system for a Dual Fuel HVAC system installation? Save Money and Save Earth with an Ultra Efficient Bosch & Carrier furnace and heat pump!
Check out today's installation featuring the ‪@BoschHomeComfortUS‬ IDS 2.0 Heat Pump Condenser with matching Evaporator coil and the @Carrier Performance 96% 2-Stage condensing furnace which will run on days under 40 degrees. Almost the Ultimate Dual Fuel HVAC system!! Learn more about Bosch heat pump systems here: tinyurl.com/MikeyPipesBosch
Helpful Links
Wago 221 Lever Wire Connectors: amzn.to/3vAnWyw
Knipex Wire Striper: amzn.to/3ARJS9n
ServicePal Mobile DIspatching & Invoicing App: app.servicepal.com/account/si...
Please support this channel and Mikey Pipes and consider the following…
"Mech" Merchandise Requests (United States Only):
BRAND NEW - AVAILABLE NOW Official Pipe Doctor long-sleeve shirts are available in Medium, Large & XL - minimum donation of $34 is appreciagted
Official Pipe Doctor tee-shirts are available in Large & XL - minimum donation of $28 is appreciated
Official Pipe Doctor FlexFit Embroidered Caps - minimum donation of $37 is appreciated
Tee-shirt & Cap donations and I will also include a Pipe Doctor pen
(If you are international - please add a minimum of $40 for shipping/postage)
I ship USPS Priority Mail. Want a shirt or hat? Email me: [e-mail] Payment links are below.
Magnets $8.50 each shipped globally and comes with 2 stickers.
I am on Discord & WhatsApp! These extended communities often gets a sneak peak on videos before I make them public on KZbin
Discord: / discord
WhatsApp Group: chat.whatsapp.com/CHZWtZe4KMG...
Shopping on Amazon? I'll get a small affiliate commission if you save and bookmark this link:
amzn.to/2PjjS4v
THIS DOES NOT COST YOU ANYTHING! Plus I get a small referral commission which equals more #giveaways - So click the link!
Free Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! [e-mail]
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
Summer-Fall 2021 Version 3.0
Consider donating $7.50 or ANY amount and you will receive Version 3.0 & Version 1.0 - regardless where you live in the world. Postage is included.
Seasons Greetings Version 4.0
Limited production available for pre-order now! Please consider any donation $5.00 or greater to help cover expenses.
PayPal is: [e-mail]
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes
C/O Pipe Doctor Plumbing
80 E Hawthorne Ave
Valley Stream, NY 11580

[@charliebrewer617]

Love Bosch. I have 2 IDP units installed on my home earlier this summer. Cut my power bill by 1/3 from year before. Amazing technology and very quiet.

[@rdmollison]

Love Bosch!! I am happy they are a sponsor, your first!!!! That is great!

[@taylord8924]

Love Bosch, super well built I’ve installed 3 or 4 over the years and I’ve never had one issue or callback

[@MikeMcCue849]

AS ALWAYS PROFESSIONAS, Doing A PROFESSIONAL JOB. LOVE YOUR CONTENT AND YOUR EXPLANATION OF EVERY DETAIL. STAY SAFE GUYS AND GIVE DANIEL A RAISE. LOVE YOU GUYS, THESE GUYS NEED 50 THOUSAND SUBSCRIBERS. I LOVE BOSCH PRODUCTS THEY ARE VERY RELIABLE. I AM A RETIRED ELECTRICIAN. I HAVE WORKED ON BOSCH AND THEY ARE VERY GOOD UNITS.VERY FEW PROBLEMS .

[@davidmcnally8400]

I started installing Bosch on fishers Island I took a full-time job six months ago on fishers Island working for Toms Plumbing and heating and I have to say they are amazing units

[@chettercheese51]

What a Good ol Brooklyn basement. Could smell The sweet Brooklyn mildew Right from the start.

[@rickw4160]

That is the most beautiful condenser base I've ever seen

[@TransFluidGotKkkKick]

#Love Bosch! Purchasing IDS 2.0 Complete system in January because of Pipe Doctor. My HVAC guy said I could replace both my current units with 1 Bosch and take care of the whole house with a single 5 ton instead of the 2 I have now.

[@joemartinez7765]

Thank you. From Denver, Colorado. No snow , yet.

[@christophermiller1520]

Mikey I just had Bosch at my shop where I’m install and production manager and the guys were great. I had 2 junior installers that were having trouble with the dual fuel hydro back up and they were a huge help.. They were just back with the gas furnace. I’m totally shocked all made by Midea

[@tallbrian100]

Professionalism in the trade, yelling, screaming, swearing, ranting. You go Mikey Pipes.

[@sermore77]

Thanks Bosch for sponsoring Mikey Pipes

[@hughholt121]

Love Bosch...my Bosch dishwasher is so quiet you need a stethoscope to hear it running. Great products by Bosch. Great job by Pipes Team.

[@bjrnsimonrd8325]

My mother's Bosch dishwasher is 30-35 years old. Quiet and works/looks as new. Bosch a quite different kind of big corporate.

[@speedy4829]

Love Bosch…installed 3: yes three Bosch systems in my home last year. Flawless and quiet operation. Recommend to all……#lovebosch

[@tedsmith5058]

Hello from the great state of Michigan. St Mike what a great video. #Love Bosch

[@The1JBanks]

Your commentary is hilarious as always. You got a good group of installers.

[@tjancijr]

We're having a Bosch IDS Plus heat pump installed to compliment our 5 year old Carrier gas furnace. Can't wait!

[@avonweather]

Congrats on the Bosch deal....welcome ! Hope to start seeing some of those Navien units with Bosch Mod-Cons.

[@Matts_Crafty]

Love using those air tight sticky collars looks clean Mike! As usual.....

[@markcollins457]

Love Bosch, what a warm fuzzie

[@peteou8126]

Little Neck! Right where my in-laws live. Lol. I’ll have to keep an eye out for your truck next time I head in from NJ for a visit. # Love Bosch!

[@larryiaquinta5003]

That a nice unit by #Love Bosch. Great job as always guys

[@andrewjensen7130]

love Bosch i love Bosch they make good dishwashers

[@dukeraul624]

I like the circular saw for those rectangular cutouts

[@RjsEpicAdventures]

Love Bosch and mikey duo

[@willmoya1704]

I love my Bosch IDS 2.0!!!

[@stevem.1853]

#welovebosch for sponsoring Mikey Pipes 👍👍👍

[@tc7922]

Thanks for toning down the hammer drill noise for us the viewer … don’t know how you guys survived that echo chamber.. I have a set of Ryobi headphones that take a battery… they cut the hammer drill noise but let me hear a person speaking… they are a worthy investment for the high end crew … Maybe Saint Mike makes an appearance ..all I could imagine while watching your clips of the hole drilling was the little old lady down the street was probably wondering what her hearing aids were picking up …thanks for the videos

[@johndraxler8231]

My johnstone tech support rep has been telling me about those Bosch heat pumps for awhile. I think saint mike just convinced me to put one in

[@bruceelias2732]

Love Bosch baby

[@cmerrill199194]

Love Bosch

[@steves1566]

The value testers was great

[@goldmarkg]

Amazing work Mikey Pipes! #Love Bosch. We need you in Boca Raton ASAP.

[@reagandickerson1997]

Clean install!!

[@williamsimmons4369]

love bosch

[@S_a_n22]

Looking at the uncluttered air handler I thought 🤔 filter dryer. Nice install gentleman.

[@deancook558]

I had one of those drills a long time ago I used it one time when I bought it and then never use it again for 15 years.

[@davidmcnally8400]

Nice clean job

[@BaconJD420]

Smart move by Mike/Bosch

[@carloscetz8314]

He is going to make love to that Bosch, lol!!!!!

[@CoolValleyHVACR]

Lol watching peter drill that hole and Mike cheering him on in the back was hilarious Love Bosch

[@CoolValleyHVACR]

@@PipeDoctor My bad, #LoveBosch

[@brendandrury2177]

He'll be sore tomorrow.

[@WswRefrigeration]

The other mikes comment at 22 min is gold

[@ralphlaurencastro]

Just wondering will the hwt fit when it's time to take it out? Or is there another access?

[@jzunno9476]

Love Bosch !🇺🇸

[@Austin23191]

Thanks Bosch #lovebosch

[@jeffgrant6914]

Holy shit Mikey pipes it was 19 degrees where I live

[@Aepek]

6:30 I’m also a bug fan of Bosch Dishwashers & Fridges…..very well made #lovebosch

[@williamsimmons4369]

you are the man mickey pipes

[@xincai951]

Nice install. Do you change any of the dip switch settings on the condenser unit? Thanks

[@hansi6606]

Congratz to your new partnership! Like the video and the install. But please give you newest teammember Peter some earplugs when doing these timeconsuming hammerdrill jobs. I'm sure his hearing will appreciate that. It's only a few cents. Keep the video coming 😊

[@darren4017]

I just started using those wagos definitely the best thing. I love those things. I carry some in pockets to test stuff and for wiring so nice to use

[@bruceelias4964]

Nice Bosch Mikey

[@Renegade-uf2od]

Hey Mikey is the bosch condensor a micro channel? How do those bosch evap coils stand up to the 410 A pressures and why are you matching it up with that Carrier furnace?

[@cripwellwalsall4700]

Time to come into the 21st century Mikey Pipes, buy a set of dry diamond core drills, you wont look back

[@Joe60459]

#lovebosch Washer, dryer, oven, dishwasher, tools. Everything I can buy Bosch I buy Bosch.

[@saywhatnowcomon3426]

I use the Honeywell 3000 with outdoor sensor whenever I do Bosch unit I recently just put it in a Eco e AC heat pump system very similar to the Bosch systems the Eco e have an app that you can download that will show you your pressures either way both systems are very nice especially the Bosch

[@abdullah_q8171]

Love Mikey pipe

[@titaniam88]

# love Bosch

[@Gutter-Snipe]

Is the chimney lined / sized appropriately for the water heater left behind or is that not code for NY? other than that clean install but you only need 2 guys for that install.

[@littlehammer439]

Love bosh

[@justinstangl1367]

Why the humidifier on the supply? And is there an advantage to wiring it with the manual control and the stat?

[@pascualescobar8369]

You would definitely getting along with my boss lol

[@russellhill5959]

Is it OK to use solder instead of silver solder brazing the dryer joints? About what psi is the equalized High and Low pressure that the dryer joints will see? New AC refrigerant operates at higher preasures.

[@russellhill5959]

@@PipeDoctor Couldn't see the solder label. Did the research below. Good stuff! Stay Brite produces an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. DETAILS Stay Brite 8 solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite 8 solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications. Stay Brite produces an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Features Engineered to provide strong, ductile connections on copper, brass, steel and stainless steel Silver color is a good color match to stainless steel Its higher silver content provides a melting range versus a single temperature melting point The melting range makes it suitable for soldering connections with a wider clearance Its low temperature characteristic promotes capillary flow and less base metal distortion and oxidation Often selected for residential HVAC tube connections as an alternative to brazing Meets NSF Standard 51 for food service equipment Conforms to the EU Reach & RoHS directive Typical Applications Heating, Ventilation, Air-Conditioning (HVAC) Refrigeration Loosely fitted couplings

[@HVACGUY]

Dual Fuels are rare around here. There are some inverter heat pumps that don’t even need heat strips.

[@williamwiseman5083]

#lovebosch another great video! Nice job

[@adamharris6251]

Great install, looks great. Only thing I don’t like is the solder when it should be brazed lineset. I don’t know what American standards are but we don’t do that here. That said, I can see the skill you have in these trades and you sir are a fantastic tradesmen. I have four Redseal journeyman trade tickets, Refrig, residential gas, industrial gas, and plumbing, so I can see the little details, and recognize the little skills a good tradesman has, you have them! 👍🏻

[@saywhatnowcomon3426]

You really don't need to braise the line sets only thing you need to really worry about braising are refrigeration lines or if your compressor burns out in your doing the compressor change other ways to stay clean and silver bright works just fine

[@nathanielreid4967]

Blades needs resharpening or replacing?

[@chrishardy2049]

Love bosch

[@Cody-ye3ye]

Mike are they 17” or 17.5” cabinet

[@johnmeore2153]

I have a carrier heat pump with a propane furnace with an optimizer to control efficiency . The outdoor temp is set for 30 degrees.

[@Hvac-dude]

#love bosch!!

[@frankbodosky747]

#Love Bosch

[@DuctlessExpert]

Dual fuel is a great system try the HONEYWELL IAQ THERMOSTAT SET UP Just wondering Does your crew air seal all the duct work and sleeve the line sets going through the blocks AND does the Bosch condenser HAVE A FILTER DRYER WITH IN THE UNIT

[@DuctlessExpert]

Just wondering So you suggest using two dryers One at the coil and the factory one ?

[@bobbertoch8244]

# LOVE BOSCH

[@Justin.J.Daniels]

Wearing the Navian swag while installing a Bosch.

[@fuzion430journey3]

You don’t want to keep that unit above the concrete a little bit so you don’t get any rust or moisture on the bottom of the cabinet,Or even just some vibration pads so you don’t get any vibration vibration noise

[@fosterhensleycm8378]

Like the Bosch. Question about furnace blower speeds control with the inverter?

[@fosterhensleycm8378]

Wiring y1 is low stage y2 is high stage, the Bosch runs on the temp of the lines to control the inverter.But the Carrier only knows the speeds of the toggle switchs if no infinity control.

[@jl5633]

congrats on your deal with bosh but why no insulation on liquid line, is a heat pump right

[@danfalvey6292]

Bosch is a great product we replaced my moms old Goodman with a Bosch IDS

[@jamesdouglas3145]

#love bosch

[@mattbilodeau2433]

Do you have some training resources for bosch my company installs tons of these and I need to get up too speed so I don't get left behind

[@Janhalasz]

Great video man! I have been looking at the Bosch units myself and finding that Bosch does not provide a lot of useful info on their web site. Can you please tell me what the main difference is between the 17.5 and 19 SEER 5 Ton setups besides the efficiency? Is it worth paying the extra and getting the 19 SEER? Appreciate your time!

[@cvandoren1]

Explained here: kzbin.info/www/bejne/pl6bXn6vrpeanKs

[@lesleyboeder1798]

That's the way we heat and cool in my part of the country . Bosch for the win Weres the 18 volt dust extractor for that drill. All you guys breathing in that dust

[@Jon-hx7pe]

good job. why not stage the furnace directly with the ecobee, better than with the board's delay. (possibly the fan too to get better modulation y1 and y2) Can't get more conductors easily? I know it's optional.

[@JordieG8]

Any reason you use soft solder? 🍻

[@frankavery568]

Why did you not take furnace off floor a few inches I would off but 4 in cement blocks

[@MasonTaylor859]

Also how did you get that transition piece just measured it out before install and had the fab shop make it for you? My boss has us make the transitions and such

[@Mapdotgolf]

Pretty sure he measured and had machine shop make it. Way easier

[@liyuanshi2377]

You solder the lineset???

[@williamserver4332]

I think the humidifier should go on the return and the 90s on the vent pipe should be the long curved type. Thanks for sharing

[@brooksparadis2230]

It actually doesn't matter

[@Aepek]

8:35 bet he’d love to use the new MILW MX FUEL Core Drill w/ all the fun cool toys that can get w/ it😉

[@rickw4160]

Tell Bosch to give you one of their vacuum dust collector heads for drilling. It works well. I realize their different divisions but... !

[@BaconJD420]

That’s funny when you asked what you forgot I was thinking filter dryer

[@RealityRenovations]

I know I'm behind on the live video Mike, but you're most vulnerable while you sleep! 😂 That's when the covid attacks! You should wear three masks while you sleep! It's the only way to survive, it's the only way to protect the public! 😷😂🤣 Congrats on the sponsor! I love Bosch products 👍🏻

[@michaelt151]

@@PipeDoctor I'm not criticizing anyone's choice. But how do we account for 0 to 760,000 deaths in less than 2 years plus long term symptoms that contnue to rise? We must look at the facts and the results , not social media opinions. At least it's something to think about.

[@RealityRenovations]

@@michaelt151 hospitals get government funding for covid related care including death. Not disputing the existence of covid. Just disputing the actual risk level.

[@RealityRenovations]

Have you installed any Bosch wall hung boilers?

[@kenbutera3530]

Y’all need a lot of Bosch clothing now to promote Bosch. Show them some more love Bosch!!!!

[@MattDNy2]

I've always love all Bosch tools and I'm sure their hvac equipment is just as solid. #LoveBosch

[@modestohodesto7140]

Love the Bosch. Do they only make that ids in a heat pump. Can you get AC only,? Thanks

[@hvacdoc2338]

Heat pump only

[@DCHVAC]

You can wire it for just AC tho

[@kennethbubser9601]

Hopefully you wired humidifier so fan stays running until it meets demand. Must guys wire it so it only runs during heat only

[@rickw4160]

Squirt some oil down the back side of the blade of the Milwaukee until it gets inside. This style tends to bind up if too dry.

[@sal4716]

School is in session with professor Mikey pipes