Ultrasonic Cleaner Unbox & Review - 30L - VW beetle dual port head cleaning - X-LARGE Tank

This week I paused and tried out a Vevor Ultrasonic Cleaner. I show what chemicals and HOW TO use a ultrasonic cleaner. I do prefer simple green, and also dawn dish washing detergent. Along with Chemtool by Berrymans.
You can purchase a Vevor Ultrasonic Cleaner At The Link Below!
Use Promo Code: VVMH5%OFF
s.vevor.com/bf...
Donations to help support the video content, please click here:
www.paypal.com...
Check out the Members...Tshirts, And Apparel! Thank you!
www.bonfire.co...
For A Members Quality Sticker: You don’t have to do anything special to be a member, just be subscribed to the channel & grab your members sticker! 👍🤗 They are high quality vinyl. If you want your sticker they are $4 free shipping in the USA ( outside the USA $5.50 free shipping) you can go to:
sladesvwbeetle...
My Website:
sladesvwbeetle...
Friends Website:
www.superbeetl...
www.allaircool...
#vwbeetle #vwbug #aircooled #sladesbeetle #beetlerestoration #vwclassicbeetle #classiccar #vintagecar #restoration #ultrasoniccleaner #simplegreen #vevor #howto #howtomake

[@eugenebaroni1298]

Prayers for EZGZ hope everything goes well for him... Great guy 👍 u nailed it when you said everyone's favorite uncle....

[@PopularityContest]

That ultrasonic machine is really coming in handy. It actually held a whole head and extra parts at the same time.

[@SladesVWBeetle]

Honestly I love it, the big one is definitely worth it. I need to see if I can get half an engine block in it.

[@richardcline1337]

I have the Vevor 180 watt 6L digital ultrasonic cleaner with the vinyl record attachment. I have a very substantial vinyl collection that I have created over the span of several decades and wanted to try one of these to see if the hype about them was true. IT IS! After I finished cleaning my entire collection I was amazed at how much better they sounded, some even as good as when new. I ran the temperature at the 32 setting and the cleaning cycle for 10 minutes. After rinsing in distilled water to get rid of any loose residue I let them air dry in a set of dish racks. I could only do six records at a time (the machine will do eight but I wanted the additional spacing) so it took over two months to do my entire collection but it was well worth the effort and time invested. AND I now have an ultrasonic cleaner for my shop since it also came with the basket seen here.

[@mikehammer4546]

Thanks Slade for getting the word out about EZGZ 🙏🙏🙏

[@SladesVWBeetle]

And thank you my friend, for letting me know what was going on. Please update me when possible. We all love Greg!

[@Volkswagenplanet]

EZGZ IS ONE OF THE ORIGINAL VW CHANNELS. YOUR RIGHT A HELL.OF A GUY. THANKS FOR SHARING THE INFO. GOD BLESS.

[@SladesVWBeetle]

I truly hope he is on the road to recovery my friend! And I hope you are doing well.

[@Volkswagenplanet]

@@SladesVWBeetle non- stop family health issues here as well. Father in law passed 2 weeks ago. Wife's uncle had quad bypass emergency surgery las Monday. The saying is correct" no matter how bad you think you have it. There is always someone in a worse position. Prayers go out to EZGZ and his family

[@r10vw]

I just came from EZ's channel bc I was thinking of him and hoping for an update. Thanks for keeping him in you thoughts Slade! This is the best community on the Tube!

[@SladesVWBeetle]

Thank you! Greg is a absolutely wonderful guy! I will always support others, and try to be helpful! I’m in hopes we have a good report on him soon! Thanks for being part of the community here!

[@rscruiser3533]

I'm so glad you are Happy --- Isn't nice you don't have to look at the lid TWICE to see which direction it goes on, And now --- it's like going to your favorite fast food place and asking them to SUPER SIZE it. And now you have the makings to super size it yourself with your new tank. ---- Now -- don't forget --- like you did with borrowing Heathers paint brush -- you cleaned it and returned to where you found it --- Wash out those Zip-lock bags and return them - you may be Forgiven --- and Hopefully you'll return to make many more videos ---- Good Video ------Rodney

[@SladesVWBeetle]

Haha!! It’s so nice, she has so many things in her craft room lol I really enjoyed the extra space in it, to get larger items in. It made such a difference. Thank you so much for being here Rodney I truly appreciate it my friend.

[@V8N8T]

Looks like a nice tool to add to the shop! It really cleaned up that head nicely:) thanks for the review Slade!

[@SladesVWBeetle]

Thank you my friend! Now I’m trying to find more things to clean lol

[@FixinBugsNStuff]

EZGZ is in our prayers. Great guy!

[@MikeMoose67]

Very well done video. Great camera work. I’m thinking I need to invest in one of those cleaners. So glad to hear you may do your live chat on Sunday night. I am hardly ever able to be on it on Friday nights. Thanks for the video I thoroughly enjoyed that.

[@SladesVWBeetle]

Thanks brother appreciate that! I’m going to try to make Sunday night, I am sick right now but hoping to get better. Friday nights are becoming a little too hard, because that’s when I try to get a lot done around the house.

[@pstreetgarage7304]

Nice piece of equipment. That size is perfect.

[@SladesVWBeetle]

Thanks my friend! I really like the large size I can get a lot of things in at one time

[@briansmythe3000]

Oh no I'm sorry too hear about Eaxy , His and this and a few others have been a wealth of Knowledge I've only had Bess For about 5 years and a First Time Nettle owner , Having always had Flat 2 Rd BMW motorcycles very similar Hope he's going too be OK

[@douglasbarnhart3324]

Love it did a great Job on the head thanks for the video Slade see ya on the next one . O go and get Heather some more bags.😂😂😂

[@SladesVWBeetle]

Thank you my friend! I enjoyed using the larger sized one. She always has things I need in her craft room lol

[@vintage76vipergreenBeetle]

I hope EZGZ gets better soon. 🙏🙏 Miss watching new videos from him.

[@SladesVWBeetle]

He is such an awesome guy! I truly am hoping he’s on the road to recovery! I so enjoy watching his videos.

[@VWBEETLEOVAL1955]

that's a really big cleaner and a very handy one. maybe i buy one in the future. A honest opinion off this product with the good and the bad things.

[@SladesVWBeetle]

It was really nice sized, I enjoyed using it. I did point out two things I wasn’t happy with, I just like to be honest.

[@VWBEETLEOVAL1955]

@@SladesVWBeetle well honestly last longer. never put that aside my friend.

[@williamtanner1372]

That works very well. It's as big as a bathtub! I have some cylinder heads that are very black and gummy. They would be a test for sure. If I actually get a tax refund, this might be the new toy.

[@SladesVWBeetle]

I really like these things. I even like the one from Harbor freight but it was a little too small. And then it took a crap unfortunately. I’m going to do more testing with different chemicals in it. That would be an extra video when I do it, I won’t make it the main video again and bore everybody lol

[@lxmustang89]

@TheEZGZ get well soon! Great review, need one of these!

[@SladesVWBeetle]

I really like this one, especially the size of it. I’m hoping he is on the road to recovery.

[@greggbrown0]

Hey Slade , be sure to fill the cleaner to the fill line. If the fluid is too low the heater will burn out.

[@SladesVWBeetle]

For sure! I showed on the directions on the back of it in the video, to keep it 3/4 full at the lowest point. That’s what they recommended. Hope you’re doing well my friend. At 37:00 on the video… when I submerged the head, it went up to the full line. I didn’t want to overflow either.

[@charlesharlan5951]

Yes That was for tea I use those all the time

[@SladesVWBeetle]

I thought that’s what it was, I wasn’t sure. But I knew it looked familiar lol Heather thought I took hers out of the kitchen lol

[@barrysteinlage6888]

Slade, we use ultrasound at the dive shop I work at. We've gone through a few of them. Mostly stupid mistakes. If you want your cleaning solutions to last longer put a small piece of tubing around an inch high in the drain hole inside the tank. After you let particulate settle, drain the tank. Most of the crud will stay in the tank. Then put the hose into a 1 gallon bottle and toss it. You can also zip tie a coffee filter over the end of the hose to collect any large chunks. You may have to use a slower flow rate. This is only if you re-use the solution. Great video.

[@SladesVWBeetle]

Wow!! That is excellent, thank you so much my friend. I am definitely going to try that, it makes sense that’s for sure.

[@PopularityContest]

@TheEZGZ get well soon brother 🙏🏽.

[@SladesVWBeetle]

I hope he’s on the road to recovery ❤️

[@vintage76vipergreenBeetle]

Distill Vinger, works great for removing rust.

[@SladesVWBeetle]

I think I’ll try that next. I use that once in my 52 Plymouth gas neck. And I was amazed how well it removed the rust.

[@terrancemoore2035]

Nice review. Let the supplier know that your review help sell a unit. Going to save up some pennies and buy one. Thank you for the class. You also have me curious about the bone marrow hazard thing.

[@SladesVWBeetle]

Thanks my friend! I truly like it, I’m glad I went with a larger one. I hope you’re doing well, and hope to see you soon.

[@robertlambert5299]

Hope he is ok and gets better. Never seen his vids but will check them out.

[@SladesVWBeetle]

He’s really a great guy! I’m hoping he’s on the road to recovery.

[@bjornbursell7681]

I have the same 30l unit. As It take a lot o time to get it up to temp, I'm using a supplementary heat source in the form of an electric charcoal bbq starter ( 1kW?) (no, it is propably not safe.. ). And you have to start the microwaves a few times during heating to agitate the fluid, temp sensor will false read otherwise as it seems to be a bit away from the heating elements.

[@SladesVWBeetle]

It is harder to get the larger units up the temperature quick. What I’ve been doing lately, it’s pouring in extremely hot water. Seems to help a little bit

[@jimstewart6145]

nice job.

[@SladesVWBeetle]

Thank you!

[@TheRiskyredneck]

Could you do a complete steering system video? I have seen the steering box video but would like to know more about the rest of the steering components. I am restoring a 71 beetle and have been relying on your video's to help me with the restore.

[@SladesVWBeetle]

Absolutely! Funny you brought this up. I did one at the very beginning if you scroll clear back. It was an a super beetle, but somewhat similar. Complete tear down. I’m going to be taking my steering column completely apart and putting new bearings and shims, pretty much rebuilding the whole steering column. It will be the same as yours. It’s almost like you read my mind. Could be about four weeks though. Thank you so much for being part of this community. I appreciate you being here

[@TheRiskyredneck]

@@SladesVWBeetle Awsome! Thank you!

[@jamiebuckley1769]

try dishwasher powder or the dishwasher pods they will remove carbon off of pistons. it is great stuff to clean parts.

[@SladesVWBeetle]

Thank you! I’ll try that!

[@DanTheManIOM]

Just cleaned some old Pierburg fuel pumps, no, not the valuable ones, the ones from 40 Hp..just 5 minutes ! and cleaning carbs now....get the biggest one you can !! - that there is good advice.

[@SladesVWBeetle]

Outstanding!!! Yes bigger the better!

[@ericleger8158]

Would it be be possible to clean a 1977 Kawasaki kz1000 cylinder head in that 8 gallon tank?

[@SladesVWBeetle]

Here’s a link to it. Scroll down, and it’ll show the measurements of a 30L/8 Gallon m.vevor.com/ultrasonic-cleaner-c_11064/30l-ultrasonic-cleaner-stainless-steel-industry-heated-heater-w-timer-p_010569648062?adp=gmc&gbraid=0AAAAACq8bLWUu1XBR1zoqhnoRaqQJbSAd&gclid=CjwKCAjwh8mlBhB_EiwAsztdBEcDU1bvnfAkg5o-N_sfUOljSiX7SF4NZgwlw45B4EslCv13z8NrEhoC7ugQAvD_BwE

[@truckgotstuck]

You ever think about putting some insulation on the top of your lid to reduce heat loss?

[@charlesharlan5951]

Mark 11:22-24 I will be praying

[@SladesVWBeetle]

Thank you my friend, he is a truly down to earth guy.

[@Garth2011]

I must have missed the measurements of the depth of this tank?

[@SladesVWBeetle]

I’ll actually be in the garage momentarily I’ll take some measurements and post it right here

[@SladesVWBeetle]

It’s 8 inches deep, 20 x 12 inches wide. That’s the inside diameters. I hope that is helpful.

[@dalemolnar2359]

Oh no!! 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻EZGZ

[@SladesVWBeetle]

🙏🏻

[@Carsnbikes73]

Could you Sous Vide a steak, then fry it and let me know how it goes?

[@SladesVWBeetle]

Good idea! 😁

[@rogermalmberg4039]

👃