So inspirational of you to mention that these are real loaded guns for 17 mins straight, and its smart of you to wear gloves so you dont leave finger prints for the law to find
@shubbagin492 ай бұрын
Love the Remington as a true shooter in replica firearms, and Love the sound of the peacemaker in a real gunfight the Schofield would be my choice, remember they or the hero only had one shot. Love all your bling, it must have a few bobs as we say in the UK to acquire these beauties. As I said SCHOFIELD wins in a gunfight, my American friend.
@RogueRiderUk Жыл бұрын
Could you maybe manage to make it a little bit clearer that these aren't real guns and are unloaded?? I think you only said it maybe 20 or 30 times!
@bjornbjorn8235Ай бұрын
He is just trying to keep us safe. ha ha , get your point sir. Othervise, nice video.
@tidls2 жыл бұрын
Nice video. I have all these as well. Also, I shoot with them. I only use lead pellets. The Schofield is the most poweful one, and also the most accurate. The colt has the smoothest trigger and it is also quite accurate. The Remington feels slightly higher quality compared to the others. The grip feels better to me and the sound it makes when cocking the hammer is very satisfying. Can't go wrong with any of them IMO. :-)
@NickBrakattack2 жыл бұрын
That's awesome, thanks for the great comments, and hope you continue to enjoy these.
@tidls2 жыл бұрын
@@timmy4539 My Colts all have rifled barrels. My remington(as well as the Schofield) have smooth barrels. However, I only shoot them using pellets. Never steel BB's. :-)
@biggusdickus5986 Жыл бұрын
I have the Colt and the Schofield, using pellets l found the Colt remarkably accurate at 10 yards, the Schofield was not accurate with 177 pellets, l remarked to my gunstore owner that l had never fired steel BBs or any BBs before and he gave me a packet of 500 to try, l only used them in the Schofield as its the only smooth bore l have, and l was amazed at how accurate the gun was with the BBs, l always understood they were less accurate than pellets but maybe so if pellets are thru a rifled barrel but the smooth bore suited the ball bearings much more. And leaving the cartridges in the Schofield and with it being break action load its far quicker to load than any other revolver. I was going to buy the Remington but heard lots of reports of it breaking quite often not long after purchase, l would be interested to know owners of its opinions
@SingleTrack66 Жыл бұрын
Is the Remington a little longer than the colt ?
@ducontra666999Ай бұрын
we really needing one of those but navy colt 1850
@bjornbjorn8235Ай бұрын
That would be great. With real wood handles it would be even greater.
@timshelley8635 Жыл бұрын
All three are excellent!
@biggusdickus5986 Жыл бұрын
You can field strip, the Remington by pressing in the black faux screw under the barrel and pulling out the ejector rod you can take out the cylinder, and its easier to clean, and clear any pelllets or bbs that get stuck. I wouldnt do it too much tho as it can disengage the ratchet arm that works the turning mechanism. You can also remove the cylinder of the Schofield by pushing it up from the bottom and twisting it.
@bjornbjorn8235Ай бұрын
You could easily paint the grips black. For real nice grips upgrade, check out Bernhard bb. I am proud to say that he is from Denmark. He makes exelent patina work on grips, among other things.
@NickBrakattackАй бұрын
@bjornbjorn8235 yep have to get bsck into customizing these
@125southernnh28 ай бұрын
I've got the Colt and the Winchester. Both display amazing craftmanship, with the edge to the Crosman, and are totally fun to shoot.
@tresdelengua2 жыл бұрын
I think the Remington "New Model" had the silver handle and you can buy a silver vynil wrap on Amazon. The Peacemaker had a "Mexican Emblem" on the handle.
@NickBrakattack2 жыл бұрын
Agreed, I will definitely have to look into that silver vinyl wrap you mentioned.
@JosephSanchez-kf5zqАй бұрын
@@NickBrakattackMy #1 Favorite Weapon is Remington 44 on 5:00, I like and love it. If it solid silver Remington 44 like in the Movie.
@theodorehowe22629 ай бұрын
I have a Barra Schofield with a 7” barrel in aged black which shoots both BB’s and pellets which is a powerful weapon and not a toy. Good luck on your display, I would use air brushing to get the grips the color needed
@scavengernick31912 жыл бұрын
The custom remington has the silver handle in the movie.
@BedsitBob Жыл бұрын
The Remington 1875 has also been sold under the name Sheridan Cowboy. I have both, but prefer the one marked Remington 1875, because it looks more authentic.
@abeo4849 Жыл бұрын
Jeez you talk more about it not being a real gun than the gun itself.
@MegaFrank1960 Жыл бұрын
I actually had to stop watching.........
@carlmiller7572 жыл бұрын
I was going to mention that the Remington grips in the movie were sterling silver, not black. I think the Schofield's were black. It also had it's trigger guard removed. I'm planning on making some silver grips for mine. I was originally going to use aluminium tape, but then decided to use the "ink" from a really good chrome pen that I intend to airbrush on the grips.
@NickBrakattack2 жыл бұрын
Very nice 👍
@jasonroberts3353 Жыл бұрын
yeah, that's right, remington-silver grips, which is what i will be doing when i get mine!, schofield-black, cowboy gun porn !.
@isaklamminen88776 ай бұрын
I had to put this out there. The right grip on the Remington 1875 isn’t supposed to come off the left one does. I own the Remington and from the left side you can see it’s screwed onto the frame. Did it come like that or did you rip it off?
@NickBrakattack6 ай бұрын
It basically fell off into my hand when I opened it.
@isaklamminen88776 ай бұрын
@@NickBrakattack thanks for your quick feedback. I guess it was a manufacturing issue then
@TheHeat552 жыл бұрын
The reason that your left grip from your 1875 is falling off could be due to the fact that a little plastic tab that sits on top of the grip has been broken off. It is very flimsy. It needs to be the first thing that you insert into the handle when you put the grip back in place. Some people don't notice it and just force the grip down. That breaks it.
@scooterbob44322 жыл бұрын
Thanks for the tip. I plan to get one at BUDK. I also ordered the Uberti "Frank James" version with the lanyard ring in 45 Colt but the dealer said it might take a few months to get one.
@AntoT022 жыл бұрын
Have you had any issues with the schofeild?? i wanna buy one but they are almost impossible to find in canada i gotta order it online and id rather know what im buying
@carlmiller7572 жыл бұрын
@@AntoT02 I have the Schofield and it's awesome. I suggest going through the pyramid air website. It technically comes in 3 styles, nickel, black, and "weathered". But the weathered and the black are very similar. Also, if you want the faux ivory grips, you'll have to order those separate. They all come with faux wood.
@jennifermarshall-cm8dhАй бұрын
Just out of curiosity can you use the shells for both bbs and pellets when it comes to the Remington ???Because I know from watching different videos for the colt peacemaker those shells are color coded .silver for pellets and normal brass for bbs. If anyone knows please let me know.
@NickBrakattackАй бұрын
@@jennifermarshall-cm8dh not sure on that
@MarkoIvankovic-rw8fm10 ай бұрын
You can get liquid plastic and make a mold from silicone .That liquid plastic is transparent and there is different powder colors for it including black.It's not too expensive.
@MrZola12342 жыл бұрын
The bear river Schofield looks cool and the cartridges look the best like they have a real bullet on the top. That said, the sound of the action sounds like a plastic toy, compared to the other 2.
@MrZola12342 жыл бұрын
You may try small independents for the 3 d printing. Look them up on job board top sites.
@mr.sinister127910 ай бұрын
Ther not toys u cannot buy these at toy stores or hobby shops.. ther not real fire arms but u can buy them from a gun store n must be treated as one cuz they can do damage and in some states like where I live they are considered fire arms and are illegal however I still collect them for ther as close as to a real gun as u can get
@Harvz78 Жыл бұрын
Hey Nick, Which one shoot consistently accurate? I got the Peacemaker pellet version. It doesn't shoot straight most of the time and hits more on the right of the sight. Unfortunately, the rear sight is fixed.
@NickBrakattack Жыл бұрын
Never shot any of them, just got them as a collection and to display. There are several pretty good videos on each around and seemed like the Remington was most accurate.
@isluderea8322 Жыл бұрын
So if I understood right, those are real guns, they are all loaded with pellets and they have all an CO2 cartridge installed in it.
@NickBrakattack Жыл бұрын
Ha ha ha
@Grizzly4570 Жыл бұрын
They actually used silver grips for the Remington 44 in the movie
@Poypoytoti16 күн бұрын
Nice 👍
@jamesbranham2217 Жыл бұрын
For painting the grips check with an auto body shop.. or use auto paint.. I bet it would come out nice
@NickBrakattack Жыл бұрын
Checked with some and they all said it's too small a job to do. Definitely looking into the paints though
@biggusdickus5986 Жыл бұрын
@@NickBrakattack I painted mine, you need 3 spray cans, 1 an adhesive enhancer, 2 a plastic paint primer and 3 a plastic spray paint, all 3 you can get from auto goods supplier's or departments in stores. , remove handles take a dish scrubbing pad and using the rough scouring part rub the handles to take off the top coat of the grips that will repel the spray otherwise, just a light rub will take off the shine shake the can until it's rattling well, spray light coats from about 6 or 7 inches away, the trick is to keep the can moving to stop the primer /paint building up and dripping, do 2 coats of adhesion enhancer, one coat wait a few minutes but don't let it dry out, add another, wait a few more minutes add the plastic primer ( you can just use the plastic primer if you want but l like the belt n braces approach, let the coats dry for a few minutes again but not longer than 5 minutes, then with the colour of choice black in my case 2 to 3 coats, but again do them lightly one at a time with 3 minutes between coats, don't be tempted to do it all at once, then leave in a well ventilated but warmish room for at least 1 day but a week if you can wait and the job is done, you can apply a neutral varnish or lacquer spray after 7 days in matt or gloss whichever takes your fancy but it's not really necessary. You must let them dry completely after the last coat, as l said 1 day at least but ideally a week or longer depending how much self control you have lol.
@Falco60-j9r3 жыл бұрын
Great video. I'm also looking for the file of these 3D grips. Can you tell if you can find them?
@NickBrakattack3 жыл бұрын
Will do if I ever come across them. Thanks for the comments
@cyrusshellard39052 жыл бұрын
Just spray em black, I did and it looks lovely
@NickBrakattack2 жыл бұрын
Nice
@cyrusshellard39052 жыл бұрын
@@NickBrakattack Black satin
@cyrusshellard39052 жыл бұрын
ASG Schofield is better quality than the Bear River. Barra 1 is really good aswel
@airgunballistics17792 жыл бұрын
Sweet collection!
@NickBrakattack2 жыл бұрын
Thank you!
@MrZola12342 жыл бұрын
Given your purpose, surprised you did not opt for replica non firing guns. Some of those are more exact replicas, and typically much more affordable. Do you know if the cartridges are interchangeable? I have heard that the Bear river Scofield and the 1875 can use each other’s cartridges.
@NickBrakattack2 жыл бұрын
I will have to double check about the cartridges ability to be used between each other, would assume so though.
@leegerrard30592 жыл бұрын
Hello bud, the peacemaker and remmington are made buy the same manufacturer but umarex bought the peacemaker licensing, and remmington, asg with so on......
@NickBrakattack2 жыл бұрын
Good stuff
@CrawDad1131 Жыл бұрын
Guns like these are why stuff like the "Rust" movie incident is inexcusable.
@devil_samuraix61762 жыл бұрын
why trigger sit more to left and not center to frame?
@NickBrakattack2 жыл бұрын
On one of them or all of them?
@garyalensr3 жыл бұрын
Such a shame you have to explain yourself like you do as we live in America and have the 2nd. Our Government is a joke!!! I can't even finish watching the video
@Cheese_steak_2 жыл бұрын
It has nothing to do with America and more to do with KZbin's policies
There are airsoft versions of this which are legal in japan
@breeddrastic784014 күн бұрын
@@underhorse5367 日本で、エアーソフトガンは、 metal hand gun❌ metal model gun lighter❌ high-powerplastics gun❌ metal BB ball❌ plastics BB ball⭕️ metal rifle machine-gun⭕️ 私は、変な法律だと思う。
@HD-ph1dc2 жыл бұрын
Just buy some black satin, and silver ABS paint at the hardware.
@NickBrakattack2 жыл бұрын
I think at this point that is what I will try
@joeytramley622 жыл бұрын
They are not toys. They are real guns. Not firearms but air guns. 1200fps can be fatal. Treat them like they're real firearms people
@HaidoroTTV2 жыл бұрын
What kinda boof are you smoking that you think a co2 pistol can reach 1200 fps? These things only peak at 500 fps *MAYBE* with alloy pellets
@joeytramley622 жыл бұрын
@@HaidoroTTV I was generally speaking of air guns. Not just pistols. Some rifles do exceed 1200fps.
@CaptainKarate Жыл бұрын
Ok - nice video in some ways but I have a major safety niggle as both an NSRA RCO & avid UK Airgunner - no CO2 pistol is a "Toy" - they all discharge a projectile that may cause a serious injury if handled in an unsafe manner. Also "Airsoft" and "Airgun" are totally different types; Airsoft fires a plastic 6 mm BB round, the pistols displayed here are Airguns so fire either, or both, (in the case of the Remington 1875) BB & 4.5 mm lead pellet (I own the Remington 1875 and Colt); so again capable of causing serious (e.g. eye injury) if treated as "toys". PLEASE STOP CALLING AIRGUNS TOYS AND LEARN THE CORRECT CLASSES OF AIRGUN BEFORE YOU POST A VIDEO!!!
@danithefoot633 Жыл бұрын
Come to the U.S. and it becomes a toy
@isluderea8322 Жыл бұрын
Here in my country, those Airguns (>0.5J
@donaldblankenship80572 жыл бұрын
Wood was the 'plastic' of the pre-industrial era. If you want authentic 19th century killing machine, use wood bolsters. Many species of tree, horn, or bone. Most can be stained and polished to nth deg. Can put weight in handle for added heft. Try homemade grips, yours or other ppl.
@andreasfetzer755911 ай бұрын
Very nice video. But do not say, that these are toys. Kids will come to a wrong conclusion. These are no firearms, right. But a pellet comes out and can harm your skin and eyes....!
@richardlacquement2874 Жыл бұрын
Never going to shoot them!!! 🤔What a Shame!!! 🤔🤨🤯
@NickBrakattack Жыл бұрын
Have plenty of other items to do shooting with, so ok to keep these in pristine condition.
@donaldrush13647 ай бұрын
Man just use Rit dye.
@richardlacquement2874 Жыл бұрын
Stop explaining your self so much!!! These aren’t real guns theses ain’t real guns!!! you’re going to get demonetized anyways!!! It is wat it is!!! They are pellet guns!!!they 😂😂😂
@titidaryati8764Ай бұрын
I am father inlaw sreng
@esbolenlocos Жыл бұрын
In the movie the Remington had solid silver handles
@timschutte3961 Жыл бұрын
The movie has a Remington with a custom handle of solid silver not Black
@NickBrakattack Жыл бұрын
Yep, mis-spoke in the order of these, still looking to customize them to match up.
@biggusdickus59862 жыл бұрын
So are they real guns and do you keep them loaded.? 😳😊
@NickBrakattack2 жыл бұрын
Ha ha ha
@AntoT022 жыл бұрын
you probs already know but by the way for the 1875 you took off the wrong panel for the co2 the right side of the grip has a nail notch