Umarex Notos BUCK-RAIL ACCESSORIES | Airgun Advisor |

The Umarex Notos is quickly becoming one of the goto airguns for novices and experienced airgunners alike. With any popular platform, we are now begging to see some great accessories coming out that will allow you to make your Umarex Notes your own. The new accessories from Buck Rail will have you drooling for more.
Checkout all the accessories for the Umarex Notos and other platforms by visiting www.buck-rail.com today.
Looking for some new products or maybe just want to see what deals are going on! Make sure you support those that support the channel and let them know the Airgun Advisor Channel sent you. Thank you for your support.
High Pressure Pneumatics - myhighpressureair.com/
Airguns of Arizona - www.airgunsofarizona.com/
Baker Airguns - www.bakerairguns.com/

[@stevengoodman3498]

Everybody who buys and shoots a Notos loves it for it's compactness and accuracy. She's a sweet rig and these items just add to the fun! Great video showing how easy these parts are to install. Had mine for a few months now and have a few mods on it as well. Happy shooting.😊

[@AirgunAdvisor]

Appreciate your comments and feedback. Love to hear what mods you went with.

[@stevengoodman3498]

@@AirgunAdvisor 42L carbon fiber bottle with 2200 psi regulator, drop block for bottle from ebayer valymurph. Deci Ball moderator from eBay seller dadr32 terminator outdoors, how it installs, You turn the rifle upside down and drive the 2 pins going thru the moderator front out with pin driver or pick. When pins are out use a pic tool to pull out the red moderator internals and insert the Deci Ball in it's place. Turn rifle right side up and install the Deci Ball in it's place, line up the holes and insert pins back in place. I was shocked how well it works. Very quiet! Then Maple products of Canada 15 shot Mega mags. West Hunter optics 5 x 25 side focus scope with high rings for the mega mags. That's it, now it's an accurate, light, target or hunting rifle I couldn't be happier with. And all mods can be easily reversed if I need to send in for warranty. Take care brother!

[@jamesvaldez2379]

I'd just be happy to have a Notos that loads a pellet into the barrel without getting stuck between the barrel and magazine. I'm going on my second guy and going back for the same reason. I'm using Premier 14.3's in .22.

[@WalnutandSteel]

I love my Notos! all buck railed up along with a few other goodies. definately one of a kind!

[@AirgunAdvisor]

Nice! What other accessories have you thrown on your Notos? Always fun to make an airgun your own.

[@stevengoodman3498]

Hi Nibs!

[@ricko2766]

I should mention to everyone how awesome Buck rail is to deal with. They were super accommodating and helpful I recommend them

[@AirgunAdvisor]

They really are a good company to work with!

[@williamwilson2624]

Those Buck Rail accessories look pretty cool. Great video.

[@AirgunAdvisor]

They certainly help the look and feel of the Notos.

[@amrak-8401]

Thank you very for the educational video.🙏

[@cameronmaxwell5341]

Hey man how's it goin? I traded my .22 cal Notos for a AirSaber Arrow Rifle which I love it's super fast and Deadly on Huntin Critter's and Deer, I miss my Notos Regulated Air Rifle, But now your Video Has Changed my life after watchin your Tricked out video the Notos conversation kit that wasn't available when I bought my Notos Regulated Air Rifle, Now I'm gonna buy another one and Now I will have a Air Rifle Not only Quite and accurate but I can put any accessories on it, Thanks for your video and God bless you and your family always.

[@cameronmaxwell5341]

Sorry I forgot to ask ya, Can you make a (Long and Slow Video) How to put this kit together please? I have a slow learning disability and can't see things fast. Thanks again for your video and God bless ya.

[@AirgunAdvisor]

Glad to hear it was helpful.

[@AirgunAdvisor]

Take it slow and use the pause button. If you are ever unsure of a step, call buckrail and I’m sure they can help you out.

[@timmy4539]

I think I might love my Notos more than my wife at least the Notos does not yell at me and use my credit cards ! Lol lol It's a great gun !!! 👍👍

[@AirgunAdvisor]

🤣 A diet of lead can get costly over time.

[@timmy4539]

@@AirgunAdvisor 🤔🤔 I think lead is cheeper than a wife ! 😂🤣😂

[@timmy4539]

I put a buck-rail handguard on my Notos it had a bit of a wiggle to it but I put a small piece of inner tube on one side of the handguard at the front & back of the handguard where it meets the air tube and the receiver and solved that it was an easy fix ! Then I put a 4x20x40 mil dot AO scope on it ' a bipod on the bottom ' a red laser on the scope and a 800 loom flashlight !! I have her all dressed up real pretty !

[@AirgunAdvisor]

Great suggestion

[@timmy4539]

@@AirgunAdvisor 👍👍

[@thomasmuhl7340]

It looks like a nice starter PCP without question..... Then blow your mind with a FX / Air Force and others......

[@AirgunAdvisor]

Everyone needs to start somewhere and this is about as good as it gets for those looking at an entry level.

[@ricko2766]

That's a very good video thank you for showing the buck rail parts are fantastic comparison. I'm still waiting for mine to arrive super excited now. I hope the original stock will accept the folding adapter

[@AirgunAdvisor]

Let us know if the folder fits. Others will want to know.

[@BuckRailAirguns]

It does not fit, unfortunately. The Notos has a non-standard thread pattern. What some folks have done is buy a 1-3/16x16 hand tap(that’s the standard thread for ARs) and rethread the OEM receiver. I’m thinking I’ll make a rear pic adapter for the OEM frame so that folks can reuse parts and cheaply add a side folder like our Poor Man’s Side Folder or an airsoft Chinesium side folder.

[@ricko2766]

Well I guess I have a fancy paperweight then. It'll look good on the coffee table anyhow

[@ricko2766]

@@BuckRailAirguns looks like I'll go ahead and get that lower receiver pistol grip from you then. Thank you very much for taking the time to share that information with us

[@markallen5252]

Where can i get the notos butt/stock that everyone is replacing. Would look good on my pp750.

[@ayosunshinee]

Where can I get the folding adapter kit?

[@AirgunAdvisor]

Buck-Rail sells them

[@johnnybbgunner2136]

Very nice set up but pricey…still debating myself on the BR kit.

[@AirgunAdvisor]

I believe you can buy pieces of the kit separately. So if you reuse the buffer tube and if you have a shoulder stock you can reuse them for this build. Or if you like the hand grip, you can buy it and not the other parts. Nice that they give you options.

[@domingoliao2724]

I would have bought that one if it can accept a more portable folding stock, than the pull & push variety!

[@AirgunAdvisor]

What type of stock are you thinking of?

[@domingoliao2724]

@@AirgunAdvisor Look at the stocks of some pcps like the compact version of Brocock, & Airmaks Katran Krait & others, the folding style saves space in the backpack more than the telescopic or push & pull type !

[@HyPex808-2]

Just curious why u have a giant scope on there…can u shoot it out to 100 yards?

[@AirgunAdvisor]

Not a 100 yard airgun. I just grabbed the scope because it wasn’t attached to another airgun. Great question

[@pestcontrolservice8653]

Where you buy this scope I love it

[@AirgunAdvisor]

Tract Optics. They sell direct to the customer from Pennsylvania.

[@surreallife777]

Will this same kit fit on the Umerax PP750?

[@AirgunAdvisor]

No idea

[@timmy4539]

Has anyone tried to change out the hammer spring in the Notos to a bit heavier spring to get a little more fps out of it ???

[@AirgunAdvisor]

Yes, let’s hear how this has gone if you have done this!

[@timmy4539]

@@AirgunAdvisor I have not done it that's why I asked . I tried calling umarex to get the sizes on the spring so I could find a heavier spring but the guy I talked to had no idea !

[@michaelblanks4284]

Umarex doesn't have a clue on anything

[@timmy4539]

@@michaelblanks4284 it sure seems that way !!

[@monk4039]

You can add a spacer inside the hammer for more preload. 4mm thickness is plenty

[@lawrenceeshoo5628]

Hell no not easy

[@AirgunAdvisor]

Really?

[@supergreatairgunreviews]

Not shooting squirrels at 50 or 60 yards? Pshh lame

[@AirgunAdvisor]

I should hope not. 😂

[@supergreatairgunreviews]

@@AirgunAdvisor I saw a video of guy shooting mice at 60 yards with night vision on notos and those pellets were lobbing in like cannon balls so ya maybe not good idea haha

[@AirgunAdvisor]

@@supergreatairgunreviews that’s crazy. Like launching a mortar at a mouse. 😂

[@supergreatairgunreviews]

@@AirgunAdvisor The pellets were going so slow by the time they got there. I was like ehh nevermind I don't want one of these haha

[@jbhk7977]

I think I'm the only one saying this but as much as I like the Notos, I don't appreciate the buckrail foregrip. It looks awesome from a distance, but when you get closer, you will see that the foregrip is just not up to par with the rest of the gun, at least not for me. It has "3D printed" all over it. I think 3D printing is oke for designing and fine tuning a part, but it's not okay for retail. The final product has te be injection molded (in my opinion) I've seen this handguard up close and it's just plain ugly.

[@AirgunAdvisor]

Not the only one and can see where you are coming from. I do like how the for grip feels in the hand. The other parts do seem to have a different (higher) level of finish. Always room for improvement.

[@jbhk7977]

@@AirgunAdvisor I agree. I hope this rail setup will improve because I would defenately buy one.