Unbelievable Manufacturing of Tuk-Tuk Loader Rickshaw cart

[@migelsanders4956]

Without Robots ! Great work you guys !!! 👍👍👍👍👍

[@multirichard007]

Get a grip. Crap assembly protocol. Everything put together with a windy gun. No torque wrenches in sight.

[@migelsanders4956]

@@multirichard007 our western world is madly over developed

[@atomthings7923]

Thank you 🤗

[@aamirkhan1846]

@@migelsanders4956 your western world is nothing compared to China. you are just third world countries

[@robylibero1771]

preferisco i robot. I saldatori vivranno poco.

[@franciscojavierperezmedina3450]

A factory with floor and workers with shoes. Amazing.

[@edSerio-r3k]

aND nOT wEARING dRESSES??

[@atomthings7923]

🤩🤩

[@bettingru]

What a stupid thing you wrote.

[@bettingru]

@@edSerio-r3k aRE yOU sTILL lEARNING tO wRITE?

[@bettingru]

Does their dark skin scare you too?

[@InvictaView]

Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Bangladesh can do too. Blessings from the UK.👍😉🇬🇧💯

[@mohdfahmi8841]

//;*;;*;;*;;;*;;*;😊😊.//.

[@Николай-г1ч4ю]

Я строитель вы так ремонты делаете как китайцы собирают дешёвый транспорт .😂

[@biman787]

That wasn't Pakistan, its Bangladesh!

[@Ronnietay269]

Anything China do INDIA can make it BETTER( But NO QC)

[@jamesbarbour8400]

Craftsmen my arse - bodgers more like !

[@redfordrn]

Pakistan can become a Rich Country if they seriously get these machines certified and sell at mass scale all over the World, specially the developing countries. These vehicles are very economical to buy, and very cost effective to maintain. Just like Japan, Korea, China made cost effective reliable cars Pakistan can do the same with such vehicles and market it to developing countries.

[@atomthings7923]

❤️

[@phils4634]

Electric rickshaws might be even more attractive, since running & maintenance costs are lower. Maybe aim for the fully-enclosed so weatherproof cabin design such as these perhaps? kzbin.info/www/bejne/raLNYX1mnN-qeMU&ab_channel=MinghongVehicle

[@modeltraingeek6544]

I want one so bad very cool great skill and time keeping by everyone 👍🏻

[@atomthings7923]

Come get it

[@JackSmith-jj3bi]

Would be perfect on my small farm to replace the Yamaha Rhino I now use with a trailer. A side by side version would be even better.

[@Cromwell648]

Very nice little machine. Well made and will give years of reliable service. Well done guys 👍👍

[@atomthings7923]

Thanks 👍

[@horacecomegna335]

The best thing about this machine besides the workers that produce it is that almost everything on this motorbike can be fixed by the owner with just basic tools.

[@atomthings7923]

Yeah exactly

[@ricardovasques293]

​@@atomthings7923do you export it to the UK if yes how much is the price I think a few people would like to get 1 of them or even different ones

[@ricardovasques293]

I WANT 1 WERE CAN I BY 1 NOW 😅😅😅😅

[@jostouw4366]

@@ricardovasques293 Yes.

[@ellinganderson5434]

The way they install bearing and races makes me cringe. It's not tapping on the bearing with a hammer, It's where you tap on the bearing that matters. The way most of them were installed will cause premature wear and failure.

[@7891ph]

You buy one of these, you know you're buying a kit, just like Chinese machine tools. Decent starting point, as long as you know that you're going to have to put some labor and time into it to make it perfect. It all depends on the price point.

[@danielpospisil1192]

are not qualified mechanics, they don't know anything other than a hammer and an impact wrench :) The bearing hits the inner ring - which is not so bad, but sometimes they forget to lubricate the seal .. Overall, they are nimrods :)

[@jayw900]

No, this is actually quite believable.

[@atomthings7923]

🤓

[@barryrollins2728]

It is amazing what has been developed over the years! How machines and jigs to precisely produce anything in such a short time!

[@atomthings7923]

True

[@ВадимЛитвиненко-щ7ж]

Ооо!А молоток,настоящий,слесарный,с трубой привареной,вместо рукоятки...

[@ДенисГерасимов-й1р]

Молотки, хитросваренная приблуда - и работает, просто страшно представить что на ВАЗе делают... ( может тут не воруют)

[@Николай-г1ч4ю]

​@@ДенисГерасимов-й1рто что на вазе делали , до сих пор ездеет 😅

[@сергейданилов-р7ш]

Да! Как же им далеко до Автоваза!!!! Или вазухи до них!!!

[@ПапапапаПаапапамаае]

@@Николай-г1ч4ю ключевое слово в твоём комменте - "ездЕЕт". Сколько $ ввалили в автоваз за время его существания, ведомо тебе?? А оно всё не ездЕЕт! )) А Оно все продолжает выходить с конвейра ржавое... За эти $$$ можно было купить ВСЕ немецкие автоконцерны- VW, BMW, M.BEN, АУДИ... демонтиррвать, перевезти в рашу, смонтировать и запустить! Но, к сожалению этим всё б и кончилось. Вновь вливания, пилёжь- делёжь... И спасайся народ на б/у японопром!

[@sergeygorbatyuk6617]

@@Николай-г1ч4ю Ну да, ездит, вот только ты не сказал за счет чего оно ездит! А за счет деталей с такого же хлама которое рассыпалось и вложений и вливаний владельцами ибо не сильно дорого купить запчасть на эти корыта или найти б/у запчасть в норм состоянии.

[@NBZW]

For your information, Model T Fords we’re built by the millions using a big hammer, torque wrenches and robots were never put too use. Isn’t that amazing ?😉

[@mohdfahmi8841]

//;*;*;;*;;*;*;;😊😊!!!!!!!;;¡¡//.

[@kittyhawk7060]

Over 15 million Model Ts were built. The only car that surpassed it in numbers built was the VW Beetle.

[@wolfganghb]

they would have used them - but at that time the robots were not invented....

[@NBZW]

Seriously, I didn’t know that 😉

[@theodoreduplessis3597]

These guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.

[@peregrine116]

@@theodoreduplessis3597 Voilà

[@brianconnelly2115]

Exceptional work. Clean shop, people wearing shoes (uncommon on many KZbin Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!

[@atomthings7923]

Great suggestion!

[@jamesbarbour8400]

At least it would be built to proper engineering standards, unlike in this video, where everything is just thrown together !

[@robertcraig-qo6cp]

IF I HAD'NT SEEN THIS WITH MY OWN EYES I WOULD NOT HAVE BELIEVED IT,,SUPER AWESOME

[@atomthings7923]

🫡

[@most-best]

What is "unbelievable" about this manufacturing process?? Your choice of word is unbelievable.

[@tcmits3699]

I think if these guys worked for a large automobile manufacturer in the USA, that plant would probably produce the best cars in the world. These people looked dedicated 😊

[@atomthings7923]

🤷‍♂️

[@imfcalif4nia543]

Owns and manufactured in India.

[@Chris_at_Home]

Never saw a torque wrench and some of the ways that bearings were hammered can damage them., but then again most of these vehicles don’t go faster than 25 Mph.

[@redfordrn]

@@imfcalif4nia543, This is NOT India, but in Pakistan. Lal Din is Pakistani Brand.

[@jamesbarbour8400]

​@@redfordrnexplains a lot......

[@rafismontano5542]

Felicidades ESTA HECHA PARA TODA LA VIDA SUPER,👍 5⭐

[@atomthings7923]

Thanks

[@GromPilot]

Thank you to LAL DIN for allowing the camera man into the plant. Much enjoyed the video.

[@atomthings7923]

🙏🙏

[@nationwideofficial7201]

😂😂😂😂 thakal Nizam

[@ratankumarsingh8979]

Wow I like it s use for farming very nice

[@atomthings7923]

So nice

[@patriley9449]

The frame looks strong enough to support a lot of weight. And it probably will.

[@atomthings7923]

Yes it is Google some pics of loader rickshaws and watch how much load they can bear

[@jakleo337]

That's a 'full floating' axle. Suitable for 3/4 ton. But they will certainly overload it.

[@chrishayes5755]

could support the weight of 5 healthy indian men, or one god fearing, freedom loving american.

[@rickreeve1246]

such a clean organized factory i suppose they would be classifed a motorcycle here in U S A would be neet to own one wow great job

[@atomthings7923]

Thanks for watching

[@patrickobrien5367]

Great video 📹 👍 can't wait to buy one 😊ok have a great day 👍 😀

[@DoNE021]

In Sweden they probably go as MC. 3 wheel's or more on a bike you only need Car driver license (B). Even if it look like a motorcykel with dual front wheel together, it also go under Car driver license. Only bike with 2wheels need MC driver license.

[@markward6076]

It's amazing how such small horsepower engines can carry such huge loads. 😊

[@atomthings7923]

True that!

[@migelsanders4956]

@@atomthings7923 wht horse power is it ? 20 or 30 PS ???

[@رمزيالسوداني-ه8ي]

ماشاء الله تبارك الله عمل ممتاز ❤❤❤❤

[@craigburns7757]

The engine seems a bit small but for this type of vehicle speed is not a priority as long as it moves goods and people it has it's place

[@atomthings7923]

Exactly

[@peniz038]

確實...起碼應該使用250cc引擎

[@larrykostopulos1332]

How tough is that 150cc single piston engine? There is a lot of weight there and it has a truck bed to fill. This is the best built tuk-tuk I have seen so far on video. Well done .

[@atomthings7923]

Great point! But it can load a lot of weight I watch them daily

[@oldskeptic1513]

... and what is unbelievable in this video? ...

[@erolactros8256]

Robotlarin issiz kaldigi yerdeyiz Erol

[@atomthings7923]

😎

[@frank64409]

Someone needs to show the man in the orange shirt how to put DECALS on correctly. Pride in your work is a must for advancement.

[@Digger63]

bloody good to see you got moden gear and concreit floors!!

[@atomthings7923]

Oh yeah!

[@rafaelolazabalreyna2120]

Me gustaría tener una maravilla de esa... Están buenas.

[@atomthings7923]

Come 🇵🇰

[@ОлегКоробкин-у7е]

Молодцы парни, работают, без устали, даже побриться не когда!

[@atomthings7923]

Thank for watching

[@michaelhannay4343]

Great technological advance here off the floor onto work bench

[@johnnorman1793]

Can't believe they don't grease the front axle before trying to drive it in with a bloody big gimpy hammer. would go in a LOT easier if they smeared a bit of grease on it, not to mention preserve the axle, and also make it easier to remove, next time it has to come out for the wheel to be replaced.

[@RP4UXO]

Great video...but no road test?

[@atomthings7923]

It’s already tested 😂

[@jamesmckay9966]

EXTREMLEY IMPRESSIVE. SO COMPLETE AND THOUGHT OUT. WOW WOW WOW.

[@atomthings7923]

🫡

[@ricbarker4829]

I found the manufacturing process portrayed in this video to be very believable.

[@atomthings7923]

ok :)

[@fabiofonseca9232]

Sou de Táquarituba sp Brasil adorei assistir seu vídeo um abraço a todos Deus abençoe sempre vcs

[@atomthings7923]

Thanks for watching I appropriate that

[@allanvillalinoofficial]

Use rubber hummer to avoid metal distort

[@atomthings7923]

Ok

[@हरिःव्योम]

he he he.. it is tuk tuk

[@АртёмНовожилов-ы5о]

При помощи кувалды и индийской матери,смастерили классный драндулет....😁😄😃

[@mohdfahmi8841]

//;*;;*;;*;*;;😊😊//.

[@atomthings7923]

🤓

[@АлександрСанников-и1ч]

Факт тот, что драндулеты далеко не плохие.

[@nicolassales8679]

Wow, one of them actually had a welding mask!

[@atomthings7923]

👀

[@jamesbarbour8400]

I know, right - probably the same one shared throughout the whole factory !

[@ΠαναγιώτηςΚαπλάνης-β6ζ]

Αγαπητοί φίλοι μου Με όλο τον σεβασμό στους υπέροχους ανθρώπους ανθρώπους που δουλεύουν σαν υλωτες δυστυχώς όμως είμαι αναγκασμένος να αναφερθώ σε κάτι που είναι τραγικά όλο φανερό το Πακιστάν είναι δυστυχώς 💯 χρόνια πίσω σέ τεχνωγνοσια και συνάμα σε συνθήκες εργασίας πάντα με αγάπη προς όλους ❤❤❤❤❤❤

[@atomthings7923]

🙏🙏🙏

[@danb.3397]

Fabrication and welding - absolute PRECISION. That was a joke.

[@atomthings7923]

😍😍

[@donpiramidon770]

прикольный джип!

[@atomthings7923]

Thanks for watching

[@fjgdlud8030]

Даа. Этот аппарат неубиваемый! 👍👍👍

[@atomthings7923]

👀

[@Jimpowell-i6i]

looks like it's the same crew from start to finish , Great job

[@atomthings7923]

😎 thanks for watching

[@clueless485]

Amazing! Where is this company? Can I buy one of these vehicles?

[@atomthings7923]

It’s in Pakistan

[@amar6996]

In India

[@redfordrn]

@@amar6996, Look at above, atomthings7923, he is the one who posted it. Why you Indians have to lie so much. This is not India, but in Pakistan.

[@Ятутглавный-т4ь]

Мне очень понравилось сборка. Супер этому заводу. Класс!

[@atomthings7923]

Thanks 🙏 glad you liked it

[@Ятутглавный-т4ь]

@@atomthings7923 дайте перевод по русскому языку?

[@jacobuszwanenburg1629]

Tuk Tuk rules !!! Incredible value

[@atomthings7923]

Yeah 👍

[@bishopcorva]

It amuses me to see the torque specs in the bolts. "What were these torqued to?" Yes. The are torqued. "But to how many foot pounds or newtons?" Five ugadugas, bolt's not moving is it? Then it's torqued.

[@atomthings7923]

🤔

[@horacecomegna335]

Torque wrenches are for mechanics who think they know what they’re doing and want to look like it.😂😂😂

[@BRI33NOR]

What h.p. does the engine put out ?. Looks a very simple and useful little truck designed to work in its own environment. Not the expensive production lines seen in the West etc but correct for the country it is built in, everyone busy and knows their job.

[@mohdfahmi8841]

//;*;;;*;*;;*;;//.😊😊.¡!¡.//.;;//.

[@amcc2531]

I am rather horrified watching them use a hammer to install bearings especially the taper bearings and then use an air gun to finally ruin them ……hope the warranty covers bearings !

[@krishnenduray1758]

its pakistan ..u should raise the level of horror ..

[@AngelPerez-pd1zi]

Hey, Mr. Perfect. What a genius you are. You should question how many of those they sell. In India they do it to last, unlike some countries they built throw - away objects ! Understand ?

[@fransbakker8990]

​@@AngelPerez-pd1zi De opmerking betreffende het monteren van lagers heeft niets met perfecte te maken , allen het juiste gereedschap gebruiken , is veel efficiënter qua tijd , en het voorkomen van klachten achteraf . De neerbuigende opmerking Mr. Perfect is derhalve misplaatst . Maar ik vraag me af of je het zelf snapt .

[@1zanglang]

@@AngelPerez-pd1zi You must watched the wrong video. What you see here, is anything else but built to last. Probably, the demand of the market for this kind of stuff is big, so, they offer more cheap quantity, and less quality. And when the customers have little to no alternatives, they would accept these pieces of junk.

[@jamestopeka2236]

Here in the Philippines no problems and they are long lasting use . I see these everyday everywhere I go and the majority are for businesses . Many here are older models if that matters ,idk.

[@luizcosmelemos3300]

❤❤ gostei do trabalho de voces top 10 so me diga o lugar e na India é parabens,otimo trabralho deveriam vender para o Brazil pro pessoal da roça seria muito útil top 10

[@redfordrn]

No eso India, eso es Pakistan.

[@NEGAN-i8i]

Who ever buys it good luck getting that gear box drain plug back out

[@atomthings7923]

It is working perfectly here in 🇵🇰

[@rondamon8004]

That Moto Truck is so useful...Great Job..!!!

[@atomthings7923]

It sure is!

[@eduardodaquiljr9637]

I love this kind of manufacturing processes!

[@atomthings7923]

thanks

[@mohdfahmi8841]

//;*;;*;*;*;;//.😊😊.

[@raymundotoledo8019]

Me da alegría y gozo ver la responsabilidad sin chismes y música barata alrededor de una producción.despues de tantas guerras verlos como crecen en la producción de sus propi necesidades. Así deben todos los musulmanes pensar trabajar en beneficio de su país y del mundo .ojalá los políticos cuiden este esfuerzo con la calidad que las sirscuntansia permiten ..bendiciones..

[@atomthings7923]

🙏🙏🥺

[@Jimpowell-i6i]

great job guys , looks like non-union workers , I wounder if they are paid by the peice , that is so cool , I'd like one

[@atomthings7923]

Thanks for watching

[@joedoakes8307]

So , when DO THEY finish all the welds on the frame ? The videographer has only recorded 'SPOT' welds to hold all the formed metal pieces of the frame together !

[@atomthings7923]

🤔🤔

[@donfink7063]

Tacked together on the jig, welding is completed on the floor out of the jig allowing access to parts that require welding. Some dimwit makes as similar comment on all these type videos. You need a several hour long video to show the process in its entirety you twerp.

[@Improveng1]

Great to see these skilled people build these superb machines. 😄😄👍👍

[@atomthings7923]

🙏🙏❤️❤️

[@billtokar644]

wow , now i know to look for the tag made in canada

[@atomthings7923]

😭😭

[@nicolayu.kotomanoff4358]

Where are the Robots?!😮 Maybe they to gone on war against a humans?😊

[@atomthings7923]

Hahahah may be

[@Kwaitao]

No robots no safety gear but high skill worker and best engineering

[@atomthings7923]

😎

[@miroberries]

....WELL DONE everybody...great looking machine!

[@atomthings7923]

Thank you kindly

[@maryluffman7124]

Too bad we can't get one in America it looks like fun to go on trips !

[@atomthings7923]

😎

[@ewanbaxter9199]

Amazing the power of that 150cc engine to move that heavy truck. Good to see them working in a modern factory with P P E supplied to all of them.

[@atomthings7923]

Right on

[@bettingru]

More proof that there are skilled workers all over the world, not just in the West. Maybe even more skilled due to limited automation, i.e. welding robots, automated assembly machines, high tech measuring and volumetrics gauges and measuring tools, automated assembly line conveyors, ergonomic tools & chairs, etc.

[@atomthings7923]

Exactly 👍

[@57629589]

Is Tuk-Tuk a brand or style? The lack of torque wrenches is amazing. Great video!✌️😎

[@atomthings7923]

Both! It’s totally new things with minimum tools and very cost efficient

[@rosewhite---]

that is a really well designed strong chassis!

[@atomthings7923]

Thanks for watching

[@МухтарНуралиев-б4л]

Да техника хороша вял бы дар😂

[@atomthings7923]

❤️❤️

[@jerryeinstandig7996]

too much use of hammers to force things together.

[@lesliewatts7537]

A well photographed video

[@atomthings7923]

Thanks for watching 😎

[@wernerkoslowski5324]

From welding to gear bulding to final assembly, the hammer is the most important tool.

[@jamessekeleti9395]

Superb!!!

[@atomthings7923]

🙏😍❤️

[@nationalelectronicssrilanka]

Well done Brothers. A handmade machine. Like the old days. Great craftsmen you have here. Cheap and useful transport for the masses. Anything China can make, Pakistan can do too. Blessings from the UKThese guys don’t need a robot just hard work and walla it’s done, Great job just give them the right tools. They don’t do it with the mouth! Their hands do the talking.Exceptional work. Clean shop, people wearing shoes (uncommon on many KZbin Videos). It would be interesting to see one built to US quality standards and specs, it would probably be three times the cost and take twice as long. Great Job guys!

[@atomthings7923]

Thanks for watching full video hope you enjoyed

[@59vaughn]

Most excellent machine for many many uses...sad they are not in us....

[@atomthings7923]

👏🏻👏🏻

[@__Lawyer__84]

Сборка оставляет желать лучшего, молоток всему заводу осуществляет пресс аппаратуру😅

[@atomthings7923]

👀

[@Владимир-э9ь2г]

Спасибо

[@atomthings7923]

You are welcome 🙏

[@Twobeers1]

Where can I find one of these fabulous automotive wonders in the city of Iloilo, Philippines?

[@harshabiliangady3211]

Lots of respect from Bengaluru Gentlemen. Very well done.

[@atomthings7923]

thanks for watching

[@nateperkins7534]

I cringe at the assembly of the gearbox and differential. A 1/2" drive air wrench to assemble every sized nut and bolt, not a torque wrench in sight.

[@atomthings7923]

🤓

[@jorgefernandez-mv8hu]

That looks like a well made machine that will give lots of service. I would say that on the tailgate, I would change the two panels that cover the tail lights when open to a wire mesh. This way they can be seen if you are carrying a load with the tailgate open. A small thing. Otherwise, I would buy one.

[@atomthings7923]

Exactly it’s very useful for transporting goods around the city

[@aleksrushiti7009]

LAL DIN LD 150 complete manufacturing process. It's a perfect ingenieeringsproject. All workers are masters. Simply genial!

[@atomthings7923]

Exactly 👍

[@sgtgrash]

That is awesome, I want one. Not sure it'd be legal in the UK though...

[@atomthings7923]

🤨🤨

[@RumMonkeyable]

Well-run, clean shop with skilled workers! 👏👍 Workers wear PPE, i.e., boots, safety glasses , hand protection, etc.

[@atomthings7923]

You got that right!

[@paulolaurett3921]

Que vidio espetacular seres humanos trabalhando, nada de robo.

[@atomthings7923]

😍😍😍

[@Ciaphas-Cain]

6:56 для тех, кто забивает подшипники в посадку молотком в аду подготовлен отдельный котёл, и для хозяина производства, который пожалел денег на гидравлический пресс

[@asami422]

тебе то какая разница. Ты на этих драндулетках вряд- ли будешь ездить. А у них там и так сойдёт. Ну, а уж если судьба тебя с этими повозками столкнёт, то у тебя будет охуенная возможность купить гидравлический пресс и перепрессовать все подшипники.

[@Ciaphas-Cain]

@@asami422 а ты что адвокат, что за рукожопов вписываешься? лругой вопрос, что я бы не купил эту хрень, даже если бы мне доплатили

[@asami422]

@@Ciaphas-Cain не, мне просто и ты и эти драндулетки похуй.

[@alexandrrivo1208]

... ну а што 😀?! запрессовка подшипника и настройка дифференцила - всё его величеством Молотком !! Класс !!😅

[@clgusa23689]

i love this sh*t, lol

[@hooXpoo]

Wish we had them in the states.

[@atomthings7923]

🤓

[@feonjun]

I want one for my small farm.

[@atomthings7923]

Come to Pakistan and get it

[@feonjun]

​@@atomthings7923! They are extremely nice though. I wonder if they're street legal in the U.S.

[@1358doni]

Parabéns pela linha de Montagem, tudo feito perfeitamente.

[@atomthings7923]

🫡

[@sidiidris1240]

very well built machine, considering the road conditions there

[@ОлегПетров-ш6ы]

Я удивляюсь мотор одноцилиндровый воздушное охлаждение. И будет возить 500 килограммов груза? Аж не верится.

[@智在必行龍]

2000KG

[@MohammedAslamtit-bitsoflife]

No protection to the driver from the elements of nature. However, awesome Lal Din is being manufactured in a small unit, it's praiseworthy....🌹💐🙏🙏🙏🙏💐🌹🥀🌺💮🏵️🌻🌼🍂🍁🍄🌾

[@atomthings7923]

Thanks for the info

[@phils4634]

There are a vast number of Tuk-Tuk accessories available as after-market products, including windshields, frontal shin guards (steel or polypropylene), and all the "bling" that any user might desire (including full LED headlights, spot / foglights, etc). These machines are entirely customisable and the only limitation is your imagination! As always, available from China for good prices!

[@johnhampson7]

This reminds me of a place I worked in when I was a boy. Catch your breath for two seconds and some bastard wanted to know if you had nothing to do. Nice product though.

[@atomthings7923]

🥺

[@chrishayes5755]

when I was a young boy my father got me work as an ironworker, they'd strap a 350lbs i-beam to my back and make me scale the frame of a 125 story building. then I'd climb back down to get another one from a pile of 500. moving that pile was a 8 hour shift. you little whiners don't know nothing about a hard days work.

[@ВалентинаВасильева-с7э]

Намного лучше чем мотоцикл урал

[@atomthings7923]

hmmm

[@rosewhite---]

I like that back axle tube has a brace piece over the welded joint!

[@atomthings7923]

Thank for watching 😍

[@Огородник-ф3н]

Пакистан рулит 😂😂😂

[@atomthings7923]

Yeah 👍

[@SHADLTD]

Very Very Very impressed 👏 👌 👍 great job guys ❤❤❤

[@atomthings7923]

🙏🙏🛺🛺

[@salvadorceninza1271]

Ojalá el gobierno de Colombia aprenda de esta industria y no se gaste la plata del pueblo en prebendas políticas

[@atomthings7923]

Thanks for watching hope you enjoyed

[@naaemsayedtaha5458]

وفقكم الله لما يحب ويرضى وجعلكم شوكه في عيون الاعداء واعلم يا اخي بان( الكلاب تنبح والقافله تسير)

[@atomthings7923]

Thanks for watching