( UNBELIEVABLE ) What have we achieved with the MINI GASOLINE ENGINE ( New Release )

This 3.5cc stationary mini engine is a 4 stroke engine, but it is necessary to add 2% oil 2 stroke to the gasoline to help lubricate the piston, noting that it is not necessary to fill the crankcase with lubricating oil.
► Get your 3.5 cc Mini Gasoline Engine, Stationary Model from this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. This text presents a summary of the engine characteristics, engine technical data, precautions to be taken and its purpose.
► Cautions:
- should only be handled by adults;
- there is no need for lubricating oil in the crankcase;
- it is mandatory to add 2% oil 2 times, mixed with gasoline;
- after a few days at rest, remove the gasoline from the fuel tank;
- make sure that the two 3.7 volt batteries are charged;
- keep caution, to avoid serious burns from the engine exhaust, which is extremely hot, as warned in the video;
- the initial start of the motor is carried out in a counterclockwise direction;
- avoid leaving it running for more than 7 minutes, so as not to overheat the engine;
► Positive points:
- nice for those who like retro design;
- finishing with perfect details that resemble a real engine;
- the sound produced by the engine is loud and impactful;
- does not require maintenance;
- high performance and a lot of torque;
- low battery consumption in electric ignition;
- ease of starting the engine;
- good stability in its operation;
- does not need any adjustment;
- all the metals used in its construction have good quality;
► Negative points:
- super heating from 7 minutes;
► Observations and personal opinion:
1 - This 1/8 scale mini engine is a perfect replica of the Dongfeng S1100 stationary diesel engine, also known as D15, a 15 HP version, very popular and used in almost all rural Asian territory, in rice irrigation, sugar cane, pasture grinder and as a propellant for electric generators, in places without electricity.
2 - It is a product with a decorative purpose, it has an impeccable finish, with aesthetic details incredibly similar to a real engine.
3 - I do not recommend a prolonged use of more than 7 minutes, due to the overheating of the engine, even designed with a small water reservoir for engine cooling, it is not enough to keep the engine at a reliable operating temperature. This super heating occurs due to the high compression ratio, favoring this high performance.
4 - Do not exceed the maximum capacity of 8 ml of gasoline in the fuel tank, because gasoline can be expelled through the vent of the fuel tank.
5 - The entire engine block is made of aluminum and the other parts are made of stainless steel.
6 - The engine speed varies between 1500 rpm at idle, up to 8000 rpm.
7 - Another feature that caught my attention is the ease of starting the engine, just turn the steering wheel for two or three turns, blocking the carburetor air intake, turn on the ignition key and overcome the compression that the engine runs . There will only be a greater difficulty in starting the initial start, if the engine is for more than 24 hours without running, which is totally tolerable for a carbureted engine.
8 - It is also worth mentioning, high precision of the project, observed by the low vibration of the engine, solved with two additional rocker arms next to the main crankshaft, worthy of much praise.
► Get your Stirling engine battle tank on this page: bit.ly/2ZfFykx, using the code "Leandro" get 10% off.
► Product features:
- Material: Aluminum Alloy + Copper + Steel
- Engine size: 94 x 83 x 56mm
- Size of the base: 100 x 122 x 22 mm
- Displacement: 3.5cc
- Speed: 1500-8000 rpm
- Piston diameter: 16.60 mm
- Stroke: 17.00 mm
- fuel tank with a capacity of 8 ml of gasoline
- 15 ml water tank
- Starting mode: External power (electric drill) or manual traction start
- Fuel: Gasoline or aviation kerosene (fuel needs to be mixed with a small amount of lubricating oil for combustion)
► Get your tractor on this page: bit.ly/3fjm7wT ► using the code "Leandro" get 10% off.
Music Credit🔻
Music provided by NoCopyrightSounds:
► Song: Jim Yosef - Link [NCS Release]
Watch: • Jim Yosef - Link | Hou...
Download/Stream: ncs.io/LinkYO
► Track: Jim Yosef & Alex Skrindo - Ruby [NCS Release]
Watch: • Jim Yosef & Alex Skrin...
Free Download / Stream: ncs.io/R
Blog: manualdomotorstirling.blogspot...
Facebook: / 292018690925248
Thank you all for the attention.
Leandro Wagner.

[@ManualdoMotorStirling]

*This 3.5cc mini stationary engine* is a 4-stroke engine, but it is necessary to add 2% oil 2-stroke to the gasoline to help lubricate the piston, noting that it is not necessary to fill the crankcase with lubricating oil. *► Care:* - must only be handled by adults; - no lubricating oil is needed in the crankcase; - it is mandatory to add 2% oil 2 times, mixed with gasoline; - after a few days of rest, remove the fuel from the fuel tank; - make sure that the two 3.7 volt batteries are charged; - be careful, to avoid serious burns in the engine discharge, which is extremely hot, as warned in the video; - the initial start of the motor is carried out counterclockwise; - avoid leaving it running for more than 7 minutes, so as not to overheat the engine; *► Get your* Mini 3.5 cc gasoline engine, stationary model from this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. This text presents a summary of the engine characteristics, technical data of the engine, precautions to be taken and its purpose. *► Positive points:* - nice for those who like retro design; - finish with perfect details that resemble a real engine; - the sound produced by the engine is loud and shocking; - does not require maintenance; - high performance and a lot of torque; - low battery consumption in electric ignition; - easy to start the engine; - good stability in its functioning; - does not require any adjustment; - all metals used in its construction are of good quality; *► Negative points:* - super heating from 7 minutes; *► Observations and personal opinion:* 1 - This 1/8th scale mini engine is a perfect replica of the Dongfeng S1100 stationary diesel engine, also known as D15, a 15 HP version, very popular and used in almost all rural areas of Asia, in rice irrigation, sugar cane, pasture grinder and as a propellant for electric generators, in places devoid of electricity. 2 - This is a product with a decorative purpose, it has an impeccable finish, with aesthetic details incredibly similar to a real engine. 3 - I do not recommend a prolonged use of more than 7 minutes, due to overheating of the engine, even designed with a small water reservoir for cooling the engine, it is not enough to keep the engine at a reliable operating temperature. This super heating occurs due to the high compression rate, favoring this high performance. 4 - Do not exceed the maximum capacity of 8 ml of gasoline in the fuel tank, as gasoline can be expelled through the fuel tank vent. 5 - The entire engine block is made of aluminum and the other parts are made of stainless steel. 6 - The engine speed varies between 1500 rpm at idle, up to 8000 rpm. 7 - Another feature that caught my attention is how easy it is to start the engine, just turn the steering wheel for two or three turns, blocking the carburetor air intake, turn on the ignition key and overcome the compression and the engine will start . There will only be greater difficulty in initial starting if the engine is not running for more than 24 hours, which is totally tolerable for a carbureted engine. 8 - It is also worth mentioning the high precision of the design, observed by the low vibration of the engine, solved with two additional rocker arms next to the main crankshaft, worthy of much praise. *► Get your Stirling engine battle tank* on this page: bit.ly/2ZfFykx, using the code "Leandro" get 10% off. *► Product features:* - Material: Aluminum Alloy + Copper + Steel - Motor Size: 94 x 83 x 56mm - Size of the base: 100 x 122 x 22 mm - Displacement: 3.5cc - Speed: 1500-8000 rpm - Piston diameter: 16.60 mm - Stroke: 17.00 mm - fuel tank with capacity for 8 ml of gasoline - water tank with a capacity of 15 ml - Start mode: External force (electric drill) or manual pull start - Fuel: Gasoline or aviation kerosene (fuel needs to be mixed with a small amount of lubricating oil for combustion) *► Purchase your tractor* on this page: bit.ly/3fjm7wT ► using code "Leandro" get 10% off. I recommend the "Enginediy" website, a serious and reliable company. The Product is not taxed in Brazil. If it is blocked at customs, a new product will be sent to the customer without additional fees. Thank you all for the attention.

[@bowaolay3052]

♥️

[@rubinask186]

জয় থথধর

[@israfilsa5580]

Bbb

[@chelseamaharani6366]

J

[@samnarey101]

០ផផ

[@kennethjanczak4900]

Fantastic..... Thanks for taking the time to make the video and share it

[@ManualdoMotorStirling]

I'm glad you liked it, your satisfaction is my motivation. Leandro Wagner.

[@marcosvaleriociencia1021]

Pô Leandro!Eu, minha esposa e sobrinho não estavamos recebendo nada e ontem verifiquei que não estava inscrito! Ela tá inscrita e não veio teu video, ela vai têr que busca!! Que lindo são estes motores!!! Cassillldaaa!🙏🙏🙏👏👏👏❤Abraço pra v e 👪!!!!!!

[@ManualdoMotorStirling]

Que triste isso que o YT está fazendo, descrever eu não tinha notado, mas o sistema está me inscrevendo toda hora em canais que não quero, está um saco isso! Essa de não enviar notificação, isso é normal, são raros as pessoas que recebem a notificação. Na verdade você precisa entrar nas configurações do APP ou no navegador, e ativar as notificações, toda atualização o YT desativa, para justamente não enviar notificação alguma, só do interesse do sistema. O que o YT está fazendo!!! Ele está filtrando e enviando apenas vídeos tops para o consumo, assim retém a pessoa consumindo mais tempo vídeos dentro da plataforma. Leandro Wagner.

[@marcosvaleriociencia1021]

@@ManualdoMotorStirling valeu! Vou repassar pro meu sobrinho, ele cuida desta parte e a cada video dou 10 reais!! Fora o do final de semana pra namorar, ele mora comigo e têm 15 anos! Mas aqui eu trago no cabresto: é bença tio de manhã e antes de dormir!😊😊😊😊🙏❤❤❤

[@agcxd]

​@@ManualdoMotorStirlingcara aonde consigo esse pequeno motor????

[@MrMinimum24]

Wow i watched complete video. What a hardwork man on this project and editing is perfect . Your patience is the key to your success.

[@ManualdoMotorStirling]

Thank you so much for this encouraging compliment. But I confess that it was the most laborious video ever for me! Leandro Wagner.

[@MrMinimum24]

Yes I know because video speak itself hardwork behind this masterpiece.

[@GranjaMascarenhas]

Fantástico! Gostei e ver o boneco trabalhando kkkkk coitado até tomou um tombo. Parabéns, e um forte abraço, amigo.

[@ManualdoMotorStirling]

Valeu pelo apoio amigo! Esse cara trabalhou, kkkk Leandro Wagner.

[@GranjaMascarenhas]

@@ManualdoMotorStirling kkkk

[@Farmtractor]

Very creative idea! Great job Leandro! 👍👍👍

[@ManualdoMotorStirling]

Thank you my friend! This video took longer than I intended, but it was finally done. But the engine is awesome, I love it, it's my pet engine!

[@Farmtractor]

@@ManualdoMotorStirling Haha indeed! I am about to purchase a new engine soon. I will be looking into a new flathead model from enginediy

[@ManualdoMotorStirling]

What is this engine, do you have a link?

[@vijayborole2418]

ईस ईंजण का आरपिअम कितणा है

[@vijayborole2418]

प्राईज किंमत रु कितणा है ईंजण का

[@toymakervn]

Unbelievable, exquisite details !

[@ManualdoMotorStirling]

Yes I agree, thank you very much for the support. Always welcome to the channel. Leandro Wagner.

[@100beamm]

i respect you, especially with the stop motion thing, how long did it took to make this video

[@klapitall]

I've never seen someone master so many techniques at once.

[@ManualdoMotorStirling]

Thank you very much for your support. Always welcome to the channel. Leandro Wagner.

[@MrMinimum24]

Congratulations for Massive Success of this Video.

[@ManualdoMotorStirling]

Thank you very much, it was a very laborious video, but rewarding watching the good acceptance. Always welcome to the channel. Leandro Wagner.

[@daleklatt1512]

Very nice I have some motors they are great this one is really cool thanks for sharing

[@ManualdoMotorStirling]

Thank you so much for the support, I'm glad you liked it. Always welcome to the channel. Leandro Wagner.

[@andrzej3511]

Przyjeżdża na stację paliw krasnoludek swoim samochodzikiem z takim właśnie silnikiem i powiada do kolesia przy pompie: - poproszę naparstek benzyny i trzy krople oleju. Zniecierpliwiony koleś przy pompie: - i co jeszcze, może pierdnąć w oponki?

[@amazonicscircuitri3762]

It's like a diesel engine, your editing is outstanding bro, how did you do that? Haha, I am your fan

[@ManualdoMotorStirling]

Hello yes! This engine is inspired by a Diesel engine. Thank you very much for watching my video, it was really hard to produce this video, it took 6 months of work, 286 scenes that I used in this video, just the animated episode, I worked the entire month of December. But it is gratifying to read the satisfaction of those who watch. Be always welcome. Leandro Wagner.

[@pimentafera1511]

Quanta criatividade e paciência 🤣🤣👏🏻👏🏻👍🏻

[@ManualdoMotorStirling]

Olá, muito obrigado, estou feliz que tenha gostado. Seja sempre bem vindo ao canal. Leandro Wagner.

[@mdshoyiab8164]

ভাই এটার দাম কত প্লিজ রিপ্লাই

[@marcelorocha5826]

Fala Leandro, como vai essa força e essa criatividade, sempre em evidência hein, deve ter gastado quase um mes nesse clip, mas ficou bacana, continuando assim vai vir ar diretor de cinema, forte abraço, sucesso!

[@ManualdoMotorStirling]

Valeu pelo apoio Marcelo, que honra ser qualificado por você para parar direto ao cinema. Mas só para animação eu gastei 1 mês (trabalhei desde o dia 25 de novembro até 23 de Dezembro) Comecei esse vídeo em agosto de 2021 e terminei agora, kkkk Esse video trabalhei duro, mas é gratificante ver que vocês gostaram, é aí que vem minha motivação. Marcelo, gravei 286 clipes para este vídeo!!!

[@akbarkeenan7754]

Bacana buku petunjuk pemakaian

[@angelicasandiegocalderon7838]

434

[@mdabdulhannan2722]

Bro what is the price of this engine

[@thichphuocnang177]

Oh, my Buddha! ha ha. Tôi đã không thể ngậm miệng, mà phải há hốc mồm, toét miệng cười từ đầu tới cuối. Thật là tí hon, thú vị và tài tình.

[@Zerpentsa6598]

Great little engine!👏👏👏

[@ManualdoMotorStirling]

Thank you for your visit. Always welcome to the channel. Leandro Wagner.

[@InvencoesDIY]

Parabéns por esse belo trabalho amigo, o vídeo ficou surpreendente. Essa animação com certeza não foi fácil, pois precisa de muito empenho em cada detalhes do vídeo, e muita criatividade. Te desejo sucesso sempre 🙌👍

[@ManualdoMotorStirling]

Muito obrigado, tenho uma divida de gratidão com você, que foi uma peça muito importante para este vídeo! Leandro Wagner.

[@AbdusSalam-dr2wj]

@@ManualdoMotorStirling 0

[@moazrayan6337]

@@ManualdoMotorStirling ভাই আপনে কি বাংলাদেশী

[@ManualdoMotorStirling]

@@moazrayan6337 আমি ব্রাজিল থেকে এসেছি, এবং এখানে ব্যবহৃত আমার অফিসিয়াল ভাষা পর্তুগিজ। চ্যানেলে সর্বদা স্বাগতম। লিয়েন্দ্রো ওয়াগনার।

[@asteriowagner7847]

Muito bom 👏👍 esta cada vez melhor este rapaz . Mas conhecendo o Leandro não é surpresa. Fico feliz pelo sucesso

[@TheFrog767]

Professional video for sure well done on everything 👏👏👏🥂🙋

[@ManualdoMotorStirling]

Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.

[@steam212]

Hi, I just uploaded a video on a model m12b engine from Stirling kit, I think this is the same engine sitting in a different orientation. Great video! Thank you

[@ManualdoMotorStirling]

Hello, this M12 model of yours vertically, it is 2.6cc, this engine in the video is 3.5cc. The power difference is big. I have another M16 engine vertically, which I haven't finished the video yet, this is 1.6cc, but the engine power is extremely weak. Always welcome to the channel. Leandro Wagner.

[@francismso]

Buen video amigo, muy trabajado, bien hecho y el motor es una maravilla 👍

[@ManualdoMotorStirling]

Hola, es muy gratificante saber que te gusto el video, muchas gracias. Siempre bienvenido al canal. Leandro Wagner.

[@bhagchandmeena9735]

@@ManualdoMotorStirling दो

[@walacedeoliveira1442]

_PARABÉNS ! Eu vejo que, até que enfim, alguém descobriu para o quê serve a utilisação destas injeções !

[@ManualdoMotorStirling]

Muito obrigado pelo elogio! Seja sempre bem vindo ao canal! Leandro Wagner.

[@JawareShorts]

Congratulation for 400k Subscribers 😀

[@ManualdoMotorStirling]

Thank you very much for your constant support. Leandro Wagner.

[@machineryworking4589]

Nice ❤ to see your channel video I am also Working on the actual use of the engine

[@lefrederico9952]

Até da pra amolar coisas, que foda mano

[@ManualdoMotorStirling]

Olá, é muito gratificante saber que você gostou do vídeo, muito obrigado. Seja sempre bem vindo ao canal. Leandro Wagner.

[@rafaelflunkes]

Incrível! Muito legal este motor!

[@ManualdoMotorStirling]

Valeu meu grande amigo, estava pensando em você que nunca aparece, kkk Leandro Wagner.

[@Trang.Dapper]

Amazing mini RC Tractor, i love diy

[@ManualdoMotorStirling]

How cool that you liked it! Be always welcome! Leandro Wagner.

[@shamasali6337]

Excellent work

[@ddk117natugumo7]

昔の日本の田舎で普通な光景であったが稲の脱穀に使っていたエンジンを思い出す様な形だね

[@ManualdoMotorStirling]

はい、このエンジンはディーゼルエンジンのレプリカであり、アジア全体で非常に一般的です。 常にチャンネルへようこそ。 Leandro Wagner

[@evolucaodamente4902]

Parabéns pelo vídeo amigo. Ganhou mais um inscrito no canal. Como você adquiriu esse motor? Abraço.

[@ManualdoMotorStirling]

Muito obrigado e seja sempre bem vindo! Este motor é meu sim, mas eu recebi de um site chinês para fazer esse vídeo rewiel, indicando o site deles para quem queria, possa comprar o seu motor. Leandro Wagner.

[@ashikurrahmangojol]

One of the great legend you can go ahead bro,,, love From Bangladesh ❤️❤️❤️❤️

[@ManualdoMotorStirling]

Thank you so much for your support, it's gratifying for me. Be always welcome. Leandro Wagner.

[@ashikurrahmangojol]

@@ManualdoMotorStirling ❤️❤️❤️❤️❤️😍🥰

[@HarekrishnaJaware]

I like your video what a hardwork your doing for 1 video. Great

[@ManualdoMotorStirling]

Hello friend, thank you very much for this recognition. This video was really hard work, but it's very motivating to read comments like yours. Always welcome to the channel. Leandro Wagner.

[@ramoneoliveira5851]

Parabéns mano, um ótimo trabalho.

[@ManualdoMotorStirling]

Estou feliz que tenha gostado e obrigado como sempre. Leandro Wagner.

[@odairlonlobao9889]

Muito bom! Parabéns!

[@ManualdoMotorStirling]

Muito obrigado Ordairlon, estou feliz que tenha gostado do vídeo. Leandro Wagner.

[@Brico-Relax]

Me encantan tus motores son chulísimos y las animaciones también saludos compañero 👍

[@ManualdoMotorStirling]

Muchas gracias por su apoyo y su suscripción a mi canal. Me encanta este motor, es muy perfecto, me alegra que te haya gustado la animación, confieso que trabajé más de 30 días en toda la animación. Sea siempre bienvenido. Leandro Wagner

[@mikruson]

Perfect Leandro!

[@ManualdoMotorStirling]

Thank you so much for the support, I'm very happy to see you here watching one of my videos again. Always welcome to the channel. Leandro Wagner.

[@GeralNaPratica]

Bela animação, esses motores são incríveis. Parabéns! 👏👏👏

[@ManualdoMotorStirling]

Muito obrigado amigo, seja sempre bem vindo! Estou muito admirado com a riqueza de detalhes, acabamento e principalmente o alto desempenho. Estou feliz que tenha gostando da animação. Leandro Wagner.

[@hirenpatel895]

Ghj me mnlpp ok km To Llllpp

[@sergioricardodemorais7280]

Aonde posso comprar um motor desse

[@ManualdoMotorStirling]

@@sergioricardodemorais7280 Olá Sérgio! Você pode comprar nessa página: bit.ly/3oStnoQ ► usando o código "Leandro" ganhe 10% de desconto. Para converter em reais clique no canto direito superior e converta de USD para BRL. Qualquer dúvida, pode me perguntar. Leandro Wagner.

[@mdfaisalahmed6392]

How do I buy what I want to buy it

[@viniciusscaravelo3161]

Nossa eu imagino o trabalhão que foi gravar 😦 ficou sensacional! Parabéns 👏 o meu like já tá garantido😆

[@ManualdoMotorStirling]

kkkkk deu sim amigo, comecei em agosto e terminei agora, kkkk Cara, raramente dá para fazer um vídeo assim, é muito demorado! Só na animação foram exatos 30 dias de serviço! Mas muito obrigado pelo seu constante apoio. Leandro Wagner.

[@harunfaxre4436]

@@ManualdoMotorStirling ي

[@anggiakirana5313]

@@ManualdoMotorStirling 'TTS danclohjohny

[@luluardi6826]

@@ManualdoMotorStirling xxx

[@ThanhNguyen-uv1nv]

@@ManualdoMotorStirling về việc 2ẻ

[@juanbullo9767]

En que lugar los venden?

[@ramoneoliveira5851]

Eu tenho que perguntar. Quanto tempo vc levou pra fazer essa animação ????

[@ManualdoMotorStirling]

kkk, bem observado! Comecei no dia 27 de novembro e finalizei em 23 de Dezembro. Muito demorado, todo o vídeo foi demorado, pois ainda estou em um processo de aprendizado. Leandro Wagner.

[@LISZT369]

Faz um cabo de guerra entre o trator e o tanque 🙂

[@ManualdoMotorStirling]

Obrigado pela sugestão, mas coitado do trator, o tanque vira o trator do avexo, kkkk para o tanque não tem que possa bater, ele é muito forte! Seja sempre bem vindo ao canal. Leandro Wagner.

[@engenhocandoluisfernandoma820]

Motores e vídeo realmente TOP! O esmeril ficou perfeito como demonstração das inúmeras possibilidades de uso...👍👍⚙⚙🖖🖖

[@ManualdoMotorStirling]

Muito obrigado Luiz pela sua fiel presença! Cara, esse esmeril ficou violento, kkk pensa em algo forte, eu me surpreendi com o motor, não esperava tanto dele. Leandro Wagner.

[@engenhocandoluisfernandoma820]

@@ManualdoMotorStirling Era exatamente isso que tu relatou que eu queria saber, sobre o torque. Cilindro e pistão devem ser perfeitos.

[@ManualdoMotorStirling]

@@engenhocandoluisfernandoma820 Bom Luiz, esse motor eu não desmontei a parte do cilindro e pistão, porque percebi que era critico remontagem, além dos cuidados com a cola de silicone para não contaminar tudo e criar vazamento na compressão, ou mesmo vazamentos de água! Mas eu tenho outro motor que ainda não postei do mesmo fabricante, o anel de vedação do pistão e um o-ring por incrível que pareça, é durável. Agora o torque dele é muito alto, muito mesmo. Isso é possível devido a alta compressão do projeto, é tanta compressão que você precisa fazer um aperto absurdo das mãos sobre o volante para conseguir dar a partida. Também devido essa alta compressão, o motor esquenta rapidinho, o tanque ferve de quente depois de uns 7 minutos, ele não poderia ser nem tão potente e nem tanta compressão para evitar esse super aquecimento, mas prefiro que esquente mesmo, kkkk Caso não tenha lido a descrição, leia ela, que relatei todos os detalhes. Leandro Wagner.

[@engenhocandoluisfernandoma820]

@@ManualdoMotorStirling São jóias da Engenharia

[@rcdoebbora8086]

Amazing 👍

[@ManualdoMotorStirling]

Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.

[@cindywieczorek5608]

Nice, atleast yours runs, when I bought a smaller golden one it wouldn’t even start and was falling apart 😢

[@ManualdoMotorStirling]

What model did you buy? I have another M16B model, it's smaller, this one doesn't start easily and I had a problem when it arrived, I had to make several adjustments to adapt to my warmer climate and the type of gasoline we have here. Leandro.

[@MrMinimum24]

Legend is Back with another Masterpiece

[@ManualdoMotorStirling]

Thank you so much for your constant support, I'm glad you enjoyed the video. Leandro Wagner

[@gazanfarkhan3684]

रृयक्षहमभबप

[@raihansk1679]

Ami a machine

[@raihansk1679]

A machine dam koto Sitamarhi

[@user-nd7nk2om3x]

@@ManualdoMotorStirling اقتصلففقص

[@nelioquintela]

Suas produções beiram ao profissionalismo, Impecável, parabéns Leandro , muito legal , Motor muito top. Maravilhoso.

[@ManualdoMotorStirling]

Muito obrigado meu grande amigo! Você reconheceu o esmeril?? kkkk Obrigado, agora mais que nunca foi muito útil. Leandro Wagner.

[@LandTruckKh]

Really good at thinking👍👍👍

[@ythanthan6125]

Tim

[@sjprime2441]

Beli dimana mesinya nama apa untuk membeli🤗

[@roedycalm1155]

Wow... istimewa

[@ManualdoMotorStirling]

Halo, sangat menyenangkan mengetahui bahwa Anda menyukai videonya, terima kasih banyak. Selalu selamat datang di saluran. Leandro Wagner.

[@Javaw-8]

Cara vc é incrível eu amo esse motores que vc trás no canal

[@ManualdoMotorStirling]

Fico feliz em saber. Seja sempre bem vindo ao canal. Leandro Wagner.

[@rildomelo834]

legal em breve eletrosdomesticos já vem com sua própria energia continua esse é um passo grande um motor elétrico desse tamanho com baterias autoregarregando é a solução

[@Paulo_Ricardo_709]

Muito bom leandro belo trabalho e dedicação,lindo video,forte abraço!😊

[@ManualdoMotorStirling]

Olá! É muito gratificante saber que vocês gostaram do vídeo, muito obrigado. Seja sempre bem vindo ao canal. Leandro Wagner.

[@hendrikusuma5311]

where did you buy it and how much did it cost?

[@ManualdoMotorStirling]

Hello! You can buy this engine and other products on this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. Any questions, you can ask me. Leandro Wagner.

[@zifaraazulfaramadhani8428]

Kasih dinamo buat jadikan Listrik AC bisa gak ya???

[@ManualdoMotorStirling]

Hai! Ya kamu bisa! Namun dengan keterbatasan waktu sekitar 5 menit, salah satu penyebabnya adalah mesin yang terlalu panas dan alasan lainnya adalah perlunya mengisi tangki bahan bakar. Selalu selamat datang di saluran. Leandro Wagner.

[@projetosdebancada7715]

Belíssimo trabalho meu amigo, dá pra imaginar o tamanho do empenho e dedicação que você teve pra nós entregar uma grande produção dessas. Agora duas duvidas, qual a função do pequeno ímã atrás da parte rotatória do motor, e sobre o protagonista principal do vídeo (boneco), ele tem um nome? rsrs

[@ManualdoMotorStirling]

Muito obrigado pelas observações! Esse imã no volante, serve para ativar o sensor que está lá em baixo do volante, quando o imã passa pelo sensor, é ativado uma centelha para a vela. kkk o boneco é um individuo não identificado, kkk Muito chamam ele te Thor!!! Leandro Wagner.

[@qalibmammadov9788]

@@ManualdoMotorStirling ğğ

[@RobsonMotoresCaseiros]

Amigo tá top de mais esse vídeo e a animação ficou muito boa. gostei do esmeril que você vez pra usar no motor 4t ficou perfeito e funciona muito bem. com certeza esse e um dos melhores vídeos que você já fez gostei de mais amigo parabéns 👏👏

[@ManualdoMotorStirling]

Obrigado meu grande amigo Robson, estou feliz que o video tenha te agrado! O esmeril ficou violento, quase ralei o coro fora ao amolar o facão, kkkk foi feio a coisa, kkk me distraí olhando para a tela da câmera e já era!!! Estou tendo um resultado satisfatório, acredito que vai dar certo. Leandro Wagner.

[@ridhomulyono3832]

Untuk pemesanan gimana mas

[@the.gods.sing.in.sweet.dreeams]

Bu kadar emek var ve çok güzel.

[@ManualdoMotorStirling]

Merhaba, çok teşekkür ederim, beğenmenize sevindim. Kanala hoş geldiniz. Leandro Wagner.

[@marcosvieira3784]

Quero um, onde comprar.

[@ManualdoMotorStirling]

Olá Marcos! Você pode comprar este motor nessa página: bit.ly/3oStnoQ ► usando o código "Leandro" ganhe 10% de desconto. O valor está em dólar, mas no canto superior direito, tem a opção BRL para converter em reais. O motor é de fabricação chinesa, rico em detalhes, e com um prefeito funcionamento, tanto que vibra muito pouco se não fosse tão bem balanceado, este motivos encarecem o produto, pois também é montado de uma forma artesanal. Qualquer dúvida, pode me perguntar. Leandro Wagner.

[@mikemarley7427]

Where can i order this engine

[@ManualdoMotorStirling]

Hello friend! This engine can be purchased with this link: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. As it is sold in dollars, use PayPal to make the payment, to convert from your currency to dollars. Any questions, you can ask me. Leandro Wagner.

[@snsagorsn590]

ha

[@merajulislamridoy7616]

@@ManualdoMotorStirlingHow Price

[@delowarhossain7193]

@@snsagorsn590 q1qaqaq

[@ManualdoMotorStirling]

@@merajulislamridoy7616 Hello friend! This engine can be purchased with this link: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. As it is sold in dollars, use PayPal to make the payment, to convert from your currency to dollars. Any questions, you can ask me. Leandro Wagner.

[@kbm9271]

i have one question? engine running with bettery or gasoline?

[@ManualdoMotorStirling]

Hello, the engine runs on gasoline, but the battery is needed, to produce the spark inside the engine and the gasoline explode, without the electric spark, the explosion does not occur. Always welcome to the channel. Leandro Wagner.

[@sono_londre]

Bl nya dmn tu mesin nya kalo blh tau

[@la_2elah_2ela_allah]

لا إله إلا الله. محمد رسول الله La Elah Ela Allah. Mohamed Rasol Allah إنا لله وإنا إليه راجعون..سبحانك ياربنا ياعظيم ياخلاق يارحمن يارحيم ياعفو ياكريم ياحي ياقيوم يا{.الله.} Please Translate This Word's.. أستغفر الله العظيم الحليم الحي القيوم وأتوب إليه. ربنا لا إله إلا أنت سبحانك سمعنا وأطعنا غفرانك ربنا وإليك المصير. سبحان الله. الحمد لله. لا إله إلا الله. الله أكبر. لا حول ولا قوة لنا إلا بالله العلي العظيم. أستغفر الله لي ولكم. حسبنا الله ونعم الوكيل. وصل على نبي الله محمد. عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته وملئ موازينه لكل المؤمنين إلى يوم الدين سبحانك ربنا آمنا بك وبعظمة سلطانك اللهم تقبل دعاء. Please Translate English.May God Help You.

[@whoisme678]

It's a very good miniature tractor, but what can you set ablaze with the fire 🔥 at the front ?🤔 👍

[@ManualdoMotorStirling]

This is a necessary care, for this reason it should not be handled by children, only by adults. Always welcome to the channel. Leandro Wagner.

[@brentsmith5647]

Brilliant video thank you 😍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@ManualdoMotorStirling]

Thank you very much for your support. Always welcome to the channel. Leandro Wagner.

[@user-vs8nd8rl8m]

👍👏👏👏👏🧠

[@ManualdoMotorStirling]

شكرا جزيلا لدعمكم. مرحبًا بك دائمًا في القناة. لياندرو واجنر.

[@ManualdoMotorStirling]

Adquira o seu motor em: bit.ly/3oStnoQ, *ganhe 10% de desconto código: "Leandro"* *► ENGLISH:* Buy your engine: bit.ly/3oStnoQ, Extra 10%off code: *"Leandro"* *► INDONESIA:* Dalam deskripsi video ini, Anda akan memiliki akses ke beberapa informasi teknis tentang mesin. *► ESPAÑOL:* compre su motor: bit.ly/3oStnoQ, obtenga un código de descuento del 10%: *"Leandro"* *PORTUGUÊS:* Na descrição deste vídeo, você terá acesso diversas informações técnicas sobre o motor. *ENGLISH:* In the description of this video, you will have access to several technical information about the engine. *INDONESIA:* Menjelang akhir Agustus, saya akan melakukan review lengkap tentang mesin bensin stasioner; *ESPAÑOL:* En la descripción de este video, tendrá acceso a varias informaciones técnicas sobre el motor. *► Cautions:* - should only be handled by adults; - there is no need for lubricating oil in the crankcase; - it is mandatory to add 2% oil 2 times, mixed with gasoline; - after a few days at rest, remove the gasoline from the fuel tank; - make sure that the two 3.7 volt batteries are charged; - keep caution, to avoid serious burns from the engine exhaust, which is extremely hot, as warned in the video; - the initial start of the motor is carried out in a counterclockwise direction; - avoid leaving it running for more than 7 minutes, so as not to overheat the engine; *► Positive points:* - nice for those who like retro design; - finishing with perfect details that resemble a real engine; - the sound produced by the engine is loud and impactful; - does not require maintenance; - high performance and a lot of torque; - low battery consumption in electric ignition; - ease of starting the engine; - good stability in its operation; - does not need any adjustment; - all the metals used in its construction have good quality; *► Negative points:* - super heating from 7 minutes; I want to thank in advance, to everyone who is leaving their collaboration, both in likes, shares and comments. Leandro Wagner.

[@jorgeabrahamhernandez1209]

Toda América sería un solo país es México en un futuro próximo el idioma oficial sería en español México va ser el primer mundo México será potencia mundial vivA México querido México kzbin.info/www/bejne/baatmZ2Hq693npY kzbin.info/www/bejne/g6HOlKl4j7mUaa8 kzbin.info/www/bejne/jZXPg4ucl6agatk Con amor se paga todo ❤️ con amor al pueblo Unido ❤️🇲🇽❤️ Con democracia Con capitalismo La grandeza de México Atentamente libertad 🇲🇽🌎💯🌍🇲🇽

[@fafuksomrat9152]

😉😉

[@iam7553]

L)

[@iam7553]

QQ

[@mdraihanchowdhury5570]

Q

[@earthbeauty9597]

Which website is available on this machine

[@ManualdoMotorStirling]

Hi! You can buy this engine and other products on this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. Any questions, you can ask me. Leandro Wagner.

[@hw0972100628]

太有才了，很厲害，很想跟你交流。

[@ManualdoMotorStirling]

非常感謝您觀看我的視頻，請問您有什麼問題？ 隨時歡迎來到頻道。 萊安德羅·瓦格納。

[@delanur8700]

Belinya dmn

[@JawareShorts]

I made a test tube thermocoustic engine with 1 cylinder. All parts are perfect .Engine is frictionless. But it will not work. What can I do please reply. I used small candle 🕯️

[@ManualdoMotorStirling]

Hello, you have chosen to make the engine more difficult to run, I do not recommend this engine. 1 - First, what is the video tutorial that you based on your project?? 2 - what material did you use to make the piston?? Because the only way this model works is using a piston made with a glass syringe, there are some videos that used other material, but it's fake, it doesn't work. 4 - A spark plug is little heat for this type of engine. Leandro Wagner.

[@JawareShorts]

I watch video from channel (liberman) (grain). I used aluminium capacitor as a piston like you used in one of your video.

[@ManualdoMotorStirling]

@@JawareShorts Hi, I figured you had made an engine using the "liberman" video. I was super outraged when I saw that video, because I've made several types of engines and that engine would never work, I claim that video has a hidden electric motor. ► To prove what I'm saying, a Stirling engine of this model, never starts running at full speed, it even starts, but it needs to run it before, in addition to being very hot. ► Also when the engine stops running, it cannot suddenly stop running. Due to the heat, it remains running for a while and gradually loses speed. ► Watch this video of mine how the engine works: kzbin.info/www/bejne/aHSsqaSNqLNnma8 ► note that before starting, the flywheel rotates back and forth, this happens in this engine model. It also works in both rotational directions. ► See this other engine I made: kzbin.info/www/bejne/l5ecfaKdZtV-qKc ► barely works, because there is a little friction in the piston and it is a design that the test tube needs to have an exact length and diameter, to give a thermal balance in the engine. ► If the "liberman" thinks I'm defaming his career, I challenge him to show the engine in front of me, and I will pay all the cost of this challenge, but I'm sure it's fake. This "liberman" motor is full of parts that produce friction, to start the shaft bearings, only with that type of traditional bearing the motor would not even work, I use special low friction bearings. His engine's connecting rods are full of play, another reason it won't work. His piston is far from perfect, full of air leakage, yet another reason it won't work. ► The capacitor piston only works when the motor has a second piston all made of steel, as the sealing of a capacitor piston will never be perfect, like a glass syringe. ► This motor that you made, only works with a glass syringe piston, or a piston made of graphite, to guarantee the perfect seal and thus the perfect compression, because it needs a good seal to work and no friction. ► I recommend following one of my canned motor tutorials, preferably the steel wool inner piston motor and balloon outer piston. Leandro Wagner.

[@JawareShorts]

@@ManualdoMotorStirling you are true youtuber. Because you help your subscribers. thanks for your help.

[@ManualdoMotorStirling]

@@JawareShorts Unfortunately, because I don't have time, I can't answer everyone anymore, but special cases like yours, I give priority. I have two channels, which takes up a lot of my time. I'm glad I was able to help you. Try to make this engine, the chance of working is much higher: kzbin.info/www/bejne/n6W9dayEfNWNjNU

[@user-ur2ki1yj7e]

Класс спасибо большое я бы не отказался от такого и даже приобрёл себе но наверное не возможно купить такую вещь

[@ManualdoMotorStirling]

Спасибо большое за вашу поддержку. Всегда добро пожаловать на канал. Леандро Вагнер.

[@mdaslammasallah5777]

veri good this Engine ❤

[@tista2399]

what a beautifull engine, regards from indonesia

[@ManualdoMotorStirling]

Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.

[@renatoaugusto3960]

Cara parabéns pelo seu vídeo, ficou muito legal essa edição com o trator o boneco e tudo mais... Mas é sério que esse motorzinho custa 2.300 contos?

[@ManualdoMotorStirling]

Obrigado, é muito motivador ler comentários como esse! Renato, é sério mesmo, custa realmente 2.300,00. Olha, eu tento entender porque tão caro, mas eu no ramo dessas miniaturas, nem faria por essa valor. Primeiramente custo a entender, como o cara construiu esse motor, teve a capacidade de fazer dois balancim, imitado um real e o motor praticamente não vibrar!!! isso é algo que eu não entendo!! Ele passou dois anos desenvolvendo esse motor. A maior dificuldade desses projetos, não é fazer funcionar, mas sim fazer um desenho real e aí funcionar, você tem dois problemas. Mas sem justificar o preço, penso que o fabricante é ainda a pessoa que menos ganha nesse motor, já o atravessador, transporte devem ficar com boa parte desse valor. O fabricante tem todo o custo de fabricação, além de uma montagem manual, não é feito em larga escala, o que também encarece o motor. Mas mesmo os motores mini nitros, eles também são caros. O motor é caro, mas lindo demais, muito violento, alta taxa de compressão, acabamento incrível, e um desenho incrível, cheio de detalhes que nunca imaginei ver em miniatura.

[@m.danishdanish260]

Ek mujhe de

[@marianroco5642]

Wow,genial clip,success

[@dz-abouttechnique1849]

Excellent video!

[@ManualdoMotorStirling]

Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.

[@markbecker8661]

Great animation, really 😎

[@ManualdoMotorStirling]

Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.

[@haziq3158]

Nak beli boleh tak dekat mana

[@mickcarson8504]

I wonder if I can use this engine for my 6 feet long model Ferry boat. 🤔

[@ManualdoMotorStirling]

It works for your boat, but I don't recommend it. Because the engine has a long-term use limitation due to overheating and a fuel tank allows only 8ml of fuel, which limits the engine running to 6 minutes. Always welcome to the channel. Leandro Wagner.

[@mickcarson8504]

@@ManualdoMotorStirling Can't it be water cooled, with a pump that cools the engine while it is idling because it has a centrifugal clutch? With the engine running on idle, the clutch is not engaged, this allows the pump to keep in-taking the water, sends it through the engine and back out the boat.

[@ManualdoMotorStirling]

@@mickcarson8504 Yes, you can make this adaptation to solve the overheating problem. But as I told you, the fuel tank capacity is limited to 8ml, where the engine will run for about 5 to 7 minutes.

[@syedraihanmahmud3136]

Animation was very good

[@ManualdoMotorStirling]

Thank you very much for your support. Always welcome to the channel. Leandro Wagner.

[@pensamaquina4777]

Que vídeo caprichado !!!!¡

[@ManualdoMotorStirling]

Nossa! Obrigado, muito motivador. Seja sempre bem vindo. Leandro Wagner.

[@elchocho2803]

Será posible adaptarle un mini radiador

[@teco2645]

Wah sangat mantap sekali mesin itu yang semangat trus moga sukses selalu hadir menyimak

[@serg-III]

Очень интересно и красиво. Вероятно использовалась 3Д печать в некоторых элементах. Дольше семи минут использовать нельзя, перегреется.

[@aqiladinan23]

Nice bro 👍

[@ManualdoMotorStirling]

Thank you very much for your support. Always welcome to the channel. Leandro Wagner.

[@LandTruckKh]

Really good at thinking

[@ManualdoMotorStirling]

Thank you very much for your support. Always welcome to the channel. Leandro Wagner.

[@LandTruckKh]

Very good

[@user-fo4jq8uf1e]

Nice video

[@vynong2902]

Anh ơi mua ở đâu vậy

[@onlyme6479]

Will it fit in my MR2 as my engine is knackered

[@ManualdoMotorStirling]

Hi, I can't tell you! Any questions, you can ask me. Leandro Wagner.

[@storywaadi6612]

For power plants whether it can be

[@ManualdoMotorStirling]

Hi! As you can see, it's just a toy that works. Any questions, you can ask. Leandro Wagner.

[@storywaadi6612]

@@ManualdoMotorStirling ok no promblem thank bro

[@user-eb6qu7mp4x]

Надо его в самокат ещё внедрить.. И посмотреть как тянет.. 😎

[@ManualdoMotorStirling]

Привет, большое спасибо, я рад, что вам понравилось. Добро пожаловать на канал. Леандро Вагнер.

[@fancyfarming6826]

Nice video very creative idea I follow your video

[@ManualdoMotorStirling]

Thank you very much, it is motivating to know that you enjoyed the video. Always welcome to the channel! Leandro Wagner.

[@mobilfardi9273]

Amazing video

[@ManualdoMotorStirling]

Thank you very much for your support! Leandro Wagner.

[@russchadwell]

Is it possible to replicate in miniature that 28 piston aircraft engine from like 1948 or around then? The R-4360 Wasp Major or something like that.

[@ManualdoMotorStirling]

Yes, it is possible! But I find it very difficult for someone to have that courage, it would be a project of years studying and putting together. Always welcome to the channel. Leandro Wagner.

[@russchadwell]

@@ManualdoMotorStirling that would be cool! If you accomplished that you'd be in history, personally, for 1,000 years!!

[@ManualdoMotorStirling]

Thank you very much for your support.

[@russchadwell]

@@ManualdoMotorStirling but, many might say it was merely 3D printed and not so great. So, today, such challenges are seemingly less appealing to attempt, I suppose. You're welcome.

[@fahrurrozigat]

Semoga sehat selalu mas aminnn

[@titanthemachine5563]

The tank was awesome

[@ReswanFamily]

wih keren sekali ... luar biasa

[@user-vv1sc6ne7r]

これは凄いエンジンだぁ😀

[@ManualdoMotorStirling]

こんにちは、あなたがビデオを気に入ったことを知ってとてもうれしく思います、どうもありがとうございました。 常にチャンネルへようこそ。 Leandro Wagner

[@farleysoares4199]

Como funciona o motor q estava saindo fogo na frente

[@ManualdoMotorStirling]

Olá Soares! Este motor é conhecido como comedor de fogo ou a vácuo. Ele suga o fogo para dentro, que é resfriado dentro do cilindro, formando um vácuo interno e essa vácuo suga o pistão para frente e depois se repete o processo. ► Esse outro vídeo você terá mais detalhes do motor do trator: kzbin.info/www/bejne/fZmqq4iFht6Bqa8 ► Esse outro vídeo explica o funcionamento do trator em português: kzbin.info/www/bejne/fKfLh3iqdrV-a9E Seja sempre bem vindo ao canal. Leandro Wagner.

[@bruceparker8033]

Engine showed in video says it is a 4 stroke. Why did the guy add 2 stroke oil to the gasoline?

[@ManualdoMotorStirling]

Hi, this engine is 4 stroke, because it works like 4 stroke. But it is necessary to add 2 stroke in gasoline, because the engine does not use oil in the crankcase or piston. So the only purpose of the 2 stroke oil is to lubricate the engine, because it works without oil in the crankcase. Always welcome to the channel. Leandro Wagner.

[@bruceparker8033]

@@ManualdoMotorStirling Thanks. I understand now.