Unboxing | Ender 3 V3 SE Unboxing: Open Your 3D World

[@__blue--blood__7857]

I got myself one as my first 3d printer. Was very easy to assemble and print the cat that comes pre installed on sd card . Very nice detail . I feel this is definitely a well made model for absolute beginners

[@TheSimulatorKing]

Hey guys so I set up my 3d printer but it doesn’t come up with a main menu on the screen so that concerns me also the plate moves back really far (on its own) and makes it impossible for the nosel to level and therefore, work. Can anyone help?

[@alejandrolanderoscontreras5454]

Is it normal for a new printer to have melted filament residue in the extruder? Or was I sold a used one?

[@soczkiens]

I'm using it for a week now (my first 3d printer, no experience) so far did like 10 prints, all went great on predefined profiles!

[@king_noob_original]

did you buy filament or no

[@ScienceMinute42]

Getting mine tomorrow. Excited!

[@Creality3D]

Looking forward to your feedback!

[@ScienceMinute42]

@@Creality3D so far so good! Easy to assemble and got to printing right away.

[@JasGawera]

Thanks for the video, I'm setting mine up now. I've hit an issue where when doing the levelling, the head goes to the right hand side then tries to go further causing a grinding noise and I think belt slipping. I don't see a limit switch on the right, How is it meant to know when to stop?

[@xkenz9096]

How do you turn on the display screen

[@CKG_35]

hello, i am having a problem with this printer: when it does the auto levling procedure the left side of the bed always ends up a bit too close and the right side is always a bit too far. how can this be fixed?

[@mikevsamy]

It seems a bit odd to run the auto z offset with filament in the nozzle. Even with the nozzle clean step, I can still see some seeping out in this video. Couldn't filament squished onto the nozzle during this test would lead to inaccurate measurements?

[@dominiekdegraen4704]

I have some problems with this printer and got 0,0000 % answers for the answer of the 14 days return back garanty ... Even without the filament in the nozzle when levelling ...

[@Creality3D]

​@@dominiekdegraen4704 Hello, is it convenient for you to leave your order number here? I will use that to urge our after service team to deal with your complaints quickly

[@miloudezwaan7418]

does anyone know what filament is shipped with this printer because i like the color.

[@tamarackstreehouse]

is it me or does the "confirm" button never work after extruding?

[@just4oge]

Getting one today!! I'll leave the feedback when i test it

[@taraskge1654]

No feedback?

[@taraskge1654]

Lol

[@just4oge]

@@taraskge1654 forgot bout it, i leaved a feedback in reddit then 🗿

[@simplekapibara]

is it true that Creality ender 3 v3 se also comes with an sd card and a reader??

[@tamarackstreehouse]

yes

[@mertgurer8908]

Hi I have bought your printer few months ago but had great experience but I was never able to match the quality I got from the initial test filament I am curious about which type of PLA is it that comes with the SE is it Hyper Pla?

[@Muszkowicz]

My son turned it on while it was on 110v but we have 220 output. After a lot of smoke coming out of the printer, we did think that it was broken but it worked. Dont know for how long it will?

[@maxx.1337]

why does it say that the nozzle temperature is too low and what do i do about it

[@SirPoggersChugusTheThird]

ive got the same issue with mine and cant figure it out

[@pabloruggero4102]

I have the same issue, did anyone find a solution?

[@nitinpachauri3201]

Hey there. I need some help as I'm facing a problem regarding the auto leveling. The nozzle part is not moving upto the bed plate however it is moving a very small distace. I re-checked the connections and everything seems to be fine. It'll be very helpfull if anyone provide any insight regarding this issue. Thanks.

[@kirilllabik8380]

I recently got the Ender 3 Neo but a fan was not working so I'm sending it back and getting this version instead.

[@Biabybebe]

TIP:/:: If you’re in the US it’s supposed to be 115v .

[@cobradragon10]

Omg it took me so long to realize i needed to switch thank you so much

[@akashic888]

This looks amazing! Will you drop an hotend upgrade that will go up to 300°C ?

[@cagneybillingsley2165]

good printer, but it stopped working in 3 days for me. i opened up to check connection and everything is fine and glued together. flashed firmware, heating works, fans work, but it is unable to home or print, it freezes and you can no longer interact with the screen. i select auto home, hot end moves up an inch then stops, entire system then locks up. is it a problem with cr touch? maybe needs updated firmware?

[@slimegardener]

If youre in europe please set it to 200-240 volts, ive learned the hard way

[@ServentofTheMostMerciful]

Just ordered as my first printer.

[@clementihammock7572]

Great price Good stuff for any entry hobbyist.

[@Creality3D]

Think same!

[@2RED_]

What are the differences between this and the s1 pro?

[@Creality3D]

Many, maybe you can see their own description on our website :)

[@K1nzo14]

Got it for my birthday sadly didn’t work and I can’t print anything could someone please help idk what to do it would mean a lot

[@yashchodankar6327]

Mine not working since the very first day itself been like 3 weeks since I got it the auto z offset process does not happen and takes me back to language selection screen I do not even get the menu tried firmware updating only screen update success but motherboard update fails. This printer has been a headache and trouble only so far maybe I am just unlucky to get the one which has problems

[@juanvazquez24]

If the automatic calibration doesn't work for you, try changing the voltage switch on the back from 230v to 115v, it worked for me.

[@MetalSammie]

Love The ender latest my first 3d only maybe 499$ in USD but please help! Does the cr or something Spool filament work on ender s ?the heat is still capable over 240-260c heat so it should melt but whats happen? If i but it on my ender series? Anyway these are few good lines where china beats price and quality -able to work complex things are super important and great! Especially when the intentionally bs west made inflation pro war(=pro ukr41n3....) sorry just fact! :-( anyway peace ✌️🕊️ and love 💕💕

[@Creality3D]

Hi, thank you for your like first! Then, they can all be used on the Ender Series as long as they are PLA.

[@SamMG23]

I got one of these and I am struggling Immensely with the gantry not being level. Because of the custom profile they have designed there is no way to add a gantry stabilizer like in the earlier ender 3 models. Also, the way the gantry connects to the base allows for no adjustment its either tight or loose which means you cannot level the gantry. It’s a great printer in every other way but if you have this issue it just stops any prints from being accurate. If anyone knows how to fix this issue, I’m all ears?

[@zUltra3D]

Loosen the 2 screws at the top of one of the threaded rods and then turn it until the gantry is more or less leveled. Mine was also skewed from the factory enough to say that the bed was unleveled, but after doing it, I got all green on the mesh level. You can use a spirit level.

[@JasonRobards2]

I wonder if they have fixed the clogging problem. It always baffled me how much of the printer was left for the customer to "tweak". It basically left us to beta test the product. Oddly, while their customer support was outsourced to youtubers looking for content. I hope they fixed it, since I believe we are past the novelty stage for 3D printing.

[@tamarackstreehouse]

I can confirm they have NOT fixed the clogging problem. Just picked up 2 brand new ones. one works good, the other immediately clogged and I have not had a single successful print despite my tweaking. it was NOT ready out of box.

[@andreamitchell4758]

Is the normal price going to be $199 or is this a pre order price only?

[@yaketyyakumo3315]

Where is the Marlin config file?

[@marutiroma6295]

What is the level noise? Thanks What is the level noise? Thanks

[@philamations]

Its kind of loud but only when everything else is silent

[@dounque451]

what if the auto leveling screen is not ALL GREEN, how to fix it

[@mindenesvegyes8512]

use screws under the bed...

[@cabbit3008]

getting mine tomorrow to replace my ender 3

[@jfalana1]

How do you get rid of the blue screen of death?

[@Creality3D]

Without a context, it's hard to know what you talking about? Could you elaborate on it?

[@jfalana1]

I turn on the printer it’s just the blue screen no menu whatsoever

[@jfalana1]

@@Creality3DI bought this printer and it is just stuck on the loading screen when I turn it on

[@Creality3D]

​@@jfalana1 Hi, thanks for the details, we did not find your email address info, could you pls contact [e-mail], we will help you with this!

[@maxbriseno40]

You need to update the small screen with the firmware from reality

[@bigmike3189]

i might up grade to this i have a ender 3 pro

[@tamarackstreehouse]

creality support is terrible but their printers are great for beginners. Beginners need a lot of support. Creality Support is the worst heh. Got 2 brand new V3 SE's. one works fine, the other one is basically a paperweight. Creality needs to just replace it.

[@RickGrimmesGIT]

I bought my first 3d printer and I was trying to fix a damn problem, about the CR-Touch, and then something with the plates, I'm never buying anything from creality Y para la gente que habla español también, no hay respuestas en nuestro idioma lo cual también jode mucho la experiencia tanto de aprender como de reparar tu equipo por tu cuenta, no diré que no compren porque al parecer solo yo tengo el problema de que me llegó un pisapapeles caro, solo les deseo mucha suerte

[@michaelberman4749]

You skipped building the gantry

[@JasonRobards2]

I was very happy about my Ender, but their customer service is just the worst.

[@LuizEduardo-el5ku]

wifi connection is a need

[@brandonschnacker1854]

It’s 199 brother they sell the upgrade

[@gamingscorpionindia1995]

octoprint

[@victordelpalacio1033]

Worst quality of printer in the world literal garbage had mine for 2 days

[@kartofel24724]

Could you specify what exactly happened?

[@victordelpalacio1033]

@@kartofel24724 i couldn't get the filament to go out. The sensor wasn't working I even changed the extruder and made sure it was clear. Afterwards it would reset (turn on and off) while leveling. I own 3 crealty resin printers that work perfectly I was surprised to have that happen with their flagship printer to be honest. Kind of made me save for a Bamboo printer

[@philamations]

WHAT HAPPENED

[@2tuffreidx]

Mine broke in a week it stopped working mid print and never turned on and when did turn on wouldn’t print

[@idkwhattoputatmyname]

​@@2tuffreidx send it to guarantee?